#102

NOTE: The sticker shown at the end of this video is NOT included. You can purchase separately from Bolt On Hooks. If you use an imported quick hitch like the one from Harbor Freight, you'll find this chain box a hand modification that you can make in just minutes. Here are some product suggestions. Check out this new item from Kens Bolt On Hooks. It's a quality USA-made chain box, toolbox, nylon strap box, or anything else you can fit inside! Find it at www.boltonhooks.com, tell Kenny that Ed from MCG sent you!
These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support!
Dewalt 20 volt impact driver:
amzn.to/3Gxw9st
Irwin Quick Clamp friction clamps:
amzn.to/3ab5LsE
Impact Driver Set:
amzn.to/3GyV0Mx
Lumax Heavy Duty Grease Gun:
amzn.to/3mFK1pA
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
My Video Gear:
Rode Wireless Go II microphone:
amzn.to/3eiJatG
Canon M50 Camera (now Mark II):
amzn.to/3vHW9uD
Battery adapter for M50:
amzn.to/2RshsBE
Sigma 16mm prime lens:
amzn.to/3vJDRcx
Sigma 30mm prime lens:
amzn.to/3epFneh
Variable ND filters:
amzn.to/3tmoHIs
This may apply to the B2301, B2401, LX2610, LX series, BX series, L series, MX series, M series, and even many other Kubota, John Deere, Mahindra, or other brands of tractors.
This video is intended for entertainment purposes only.
#MCGtube #MCGTV

[@kdeckster]

Thanks Ed and MCG! We appreciate the great insta video. Just one point of clarification, the warning/danger sticker is not "included" with these, well sell them separate for only $3 each.

[@MyClutteredGarage]

Sorry about that, Ken! Great job on this box!

[@RossOnTheLand]

Ed! Happy Memorial Day tomorrow. Wanted to show my support for your channel and say thanks for showing off the chain box. Have a good day.

[@MyClutteredGarage]

Thanks Ross!

[@RCAFpolarexpress]

@@MyClutteredGarage Ed, that is almost 20 $ Canadian Fund Mannn 🤣🤣👌👌👍👍 Cheers 🍻🍻

[@RossOnTheLand]

@@RCAFpolarexpress that's some golden $$ right there. Haha

[@MIoffGridAdventures]

I love your channel, Ed - thanks for the consistently helpful, friendly, entertaining content! And thanks for sharing this review and the discount code. I just purchased a chain box for each side of my iMatch along with lids and clamps to get as much out of it as I can. I'm going to try some modifications to make it waterproof for tool storage too. I'm a newbie KZbinr myself who is also very new to the tractor world. Your videos have been very helpful to me as I consider the kind of content and methods for effective videos. I have a ton to learn, but appreciate your example.

[@MyClutteredGarage]

Awesome. I appreciate your support and kind comments good luck with the channel! It’s a lot of work, but very rewarding.

[@khtractors]

That’s definitely a handy accessory! Always nice to have extra storage on a tractor!

[@MyClutteredGarage]

Hey Ben. It’s such a simple yet effective design.

[@d.a.ballou9740]

Great job Ed! I'm not sure what impressed me more, the product or the fact that you never dropped a screw!🤣👨‍🚒

[@MyClutteredGarage]

Haha! I got lucky this time! Thank you.

[@DIYMyWay]

Hi Ed! That does look like another great product from Ken! And you did a great job installing it and demonstrating it. Love the sticker on the lid! LOL!

[@MyClutteredGarage]

Thanks Martin. I’m trying to let folks know that I was wrong to say the stickers are included. They sell them separately. Great products, for sure!

[@ritterjon]

💥 Well now there’s a neat product! Nice work Ken and great video Ed! *Keep on tractoring!*

[@MyClutteredGarage]

Thanks Jon!

[@billfenner7084]

That looks very handy to me.

[@watershedoverlook]

I like this! I've been toying with the idea of fabricating some sort of Quick Hitch tool box...never thought about going outside! I'm gonna stroll on over to Ken's and check this out! Thanks Ed. 👍🙂

[@MyClutteredGarage]

Sometimes ya gotta think outside of the box, Chris 🤣

[@watershedoverlook]

I see what you did there. 😉👍

[@twinbrookacres]

The box looks like a very good product. And, the sticker is perfect! I like the blooper at the end. I have an endless supply of bloopers 🙂

[@MyClutteredGarage]

Haha, thanks very much. FYI, I was wrong about the sticker. It is sold separately.

[@OrangeismyNewGreen]

Nice addition to the quick hitch 👍🏻. I remember seeing the original version for the JD iMatch. Have a great week Ed 🙂🙋🏼‍♂️👍🏻

[@JustCaidsDayFarm]

That is super cool and a really easy install. If only I had a quick hitch... Great video Ed!

[@jimmccullough1051]

Been asking and waiting for this since seeing the green one. Time to order.

[@kdeckster]

Yes Jim we had a lot of trouble getting these to market, but they are finally here!

[@brutalbob3982]

Thanks Ed, looks like a nice product, will call and see about ordering some. Take care, God Bless, STAY SAFE

[@craigwingnut9570]

Nice, finally a toolbox/chain box that I can actually mount on my tractor that is close to the area I need the tools, hitch pins, and WD40 stored in it! The video was great very clear and made the decision to buy, a no brainer, for me! Thanks, new subscriber, keep the ideas coming,

[@MyClutteredGarage]

Thanks Craig!

[@JelenOutDoors]

That's a really nice accessory. Thanks for sharing.

[@WichhartAcres]

Nice little kit Ken put together! Love the bloopers at the end lol Have a good one Ed

[@MyClutteredGarage]

Haha, thanks!

[@sassafrasvalley1939]

That would be handy. I keep mine in a plastic bucket. Fold the chain in half, drop the fold in first and put the hooks on the bucket rim. I don’t have a quick hitch for my BX. Because, I don’t want to lose any mechanical advantage on my 3-point lift. But, I am going to make a chain box that will weld to my weight box. I will include the lid and cut outs for keeping the hooks at the top. It also stops the chain from tangling! Thanks Ed… that’s an idea worth building from… if you don’t have a quick-hitch!

[@keegantimber8571]

Great modification and accessory!

[@kylesmith8769]

I’m anxious to get me a couple of those. Thanks for bringing us another great item.

[@MyClutteredGarage]

Thanks Kyle. Simple yet effective. FYI, the stickers are sold separately.

[@kylesmith8769]

@@MyClutteredGarage thanks for pointing that out. It’s worth $3 for the smile it’ll bring putting that on my equipment. 😁

[@RCAFpolarexpress]

Good evening Sir, this is a very nice side Chain Box Sir and great protective cover too 👌👍😇 Thank you for your Memorial Day video Sir 👍😌 Very fun bloopers at the Sir Cheers 🤣🤣👌👌👍👍🍻🍻

[@MyClutteredGarage]

Thanks, David!

[@RCAFpolarexpress]

@@MyClutteredGarage 😇😇👍👍👌👌🍻🍻

[@MJADoingStuff]

Looks like a great product👍 Nice video Ed👍 thanks for the video 😁👍🚜💨🍳

[@MyClutteredGarage]

Thanks Mitch!

[@MannistoCay]

Cool, love the bloopers.

[@nicholaslacovara2381]

another great video!

[@MyClutteredGarage]

Thank you, Nick!

[@MarkWilliams-vp7xw]

Nice video , I love the box but I’m not a big fan of the self tappers because they manage to loosen up . Nut-serts would work great for this

[@Wheelloader__]

Awesome video Ed. The sticker gives it that finishing touch. I need that quick hitch hook. None of my implements work with my quick hitch. All because of that hook.

[@MyClutteredGarage]

Yes the hook is great! I misspoke about the stickers… they are sold separately.

[@kdeckster]

We have them for sale! www.boltonhooks.com

[@timsawyer7443]

What brand of quick hitch do you have, if you don't mind my asking? I know this hook issue is a problem for the HFT quick hitch, but I'm pretty sure it is for other brands as well. Just curious.

[@Wheelloader__]

@@timsawyer7443 Haul master. Got it from Amazon.

[@timsawyer7443]

@@Wheelloader__ Haul Master from Amazon? That's weird, since it's the Harbor Freight brand. Still, thanks for responding.

[@deanbarr5740]

Thats a handy little dandy Ed.

[@MyClutteredGarage]

Thanks Dean!

[@timsawyer7443]

Love this, and am being tempted to spend more money now! My wife is going to start not liking you and Ken if you keep this up -- lol! Nice video, as always.

[@MyClutteredGarage]

Thank you Tim! Let me know if you need a note for your wife, ha ha!

[@preformancemustang]

More bloopers Ed!!! 🤣🤣

[@MyClutteredGarage]

Thanks for watching til the end! 😄

[@prow6586]

⛓️Good need product info. Does the chain box have drain holes in the bottom of the box? 🚜🤠🍻

[@MyClutteredGarage]

It does. Thanks for watching. -Ed

[@keithrayeski3147]

Really like the sticker!!🤣👊🏻

[@margaretmatthews511]

QUESTION: How much toe chain?

[@MyClutteredGarage]

You’re SO funny. 🤣

[@MyClutteredGarage]

And you spelled tow wrong 😄

[@margaretmatthews511]

COMMENT: I did!!!

[@cascaderetriever7618]

Anyone know if this will this fit Landpride QH 15? Thanks! Great video.

[@MyClutteredGarage]

According to Ken, it will not. There is a printable template on the bolt on hooks website to check other brands. Thanks for watching!

[@cascaderetriever7618]

@@MyClutteredGarage thanks!

[@williamholtzclaw9372]

Really like the sticker

[@MyClutteredGarage]

Hi William. I misspoke. It’s not included but can be purchased from KBOH separately.

[@PurpleCollarLife]

Very nice addition! Great idea.

[@MyClutteredGarage]

Thanks for watching, Chad!