Making the ULTIMATE 3D Printing SMART DESK

Build a dream 3D Printing desk with integrated responsive smart lighting and more!
Video is sponsored by Fezibo. 👇 More info below 👇
UK Store: bit.ly/44xaiN1
US Store: bit.ly/3NWIhHW
DE Store: bit.ly/3PXLCZP
Promo code: DIY Machines (Save £37 off)
(code is valid for all stores.)
I've been dreaming of building the ultimate work station for my design and 3D printing, so I took a sit/standing electric desk from Fezibo and upgraded it with modular storage, smart LED lighting and a iOS17 iPhone Standby Screen desk charger.
List of items used in this project and where to find them:
■ 24v WS2811 FCOB LED’s: geni.us/WS2811-FCOB
■ Aluminium LED diffusion channels: geni.us/LEDDiffusionChannel
■ 3D Printer Filament: www.3djake.uk
■ Logic Level Shifter (74AHCT125): geni.us/74AHCT125-LLS
■ ESP8266 Dev Board: geni.us/wemosD1
■ 24v Power Supply (6 amp+): geni.us/12VPowerSupply6A
■ Some 20AWG wire (0.8128mm in diameter): geni.us/20AWG
■ 3M Command Hanging Strips: geni.us/CommandStrips
■ MagSafe Charger: geni.us/MagSafeWirelessCharger
■ 3D Printable iOS 17 MagSafe Stand: www.printables.com/model/5310...
■ PCB from Geoleaf project which I used to connect the Microcontrollers and logic level shifters: www.etsy.com/uk/listing/10840...
These are some of my favourite tools I use and can recommend:
■ Battery-powered glue gun: geni.us/BoschBatteryGlueGun
■ Bosch Bit Driver: geni.us/Bosch-Screwdriver
I use a Prusa Mk4 for my projects and highly recommend both it and the Prusa Mini. If I inspired you to take up 3D printing please consider purchasing a printer via this link: shop.prusa3d.com/#a_aid=diymac...
Prusa support my channel when you use that link at no cost to yourself. :)
==========
The WLED firmware can be downloaded from here:
install.wled.me/
3D printed parts, wiring diagrams, FAQ etc can be found here:
www.diymachines.co.uk/creatin...
My Etsy store:
diymachines.etsy.com
==========
SAY THANKS:
Provide continual and dependable support through Patreon:
/ diymachines
Or join this channel on KZbin Memberships:
/ @diymachines
Buy me a coffee to say thanks: ko-fi.com/diymachines
SUBSCRIBE:
■ / @diymachines
INSTAGRAM: / diy_machines
FACEBOOK: / diymachines
ETSY: www.etsy.com/uk/shop/DIYMachines
==========
List of camera and lighting equipment I use:
Sony A7 III: geni.us/Sony-Alpha7-III
Tamron 28-75mm F2.8 RXD A036SF Lens for Sony-FE : geni.us/TamronRXD-28-75mm
Aputure Amaran HR672C: geni.us/AputureAmaranHR672C
Aputure MC: geni.us/FAPGL
RØDE VideoMic Pro+: geni.us/RodeVideoMic-ProPlus
Blue Snowball iCE: geni.us/BlueSnowball-iCE
Philips Hue Lightstrip Plus: geni.us/PhilipsHue-LightStrip
Disclaimer:
This video is shared for demonstration purposes only.

[@andymeenanvideos]

Love the part when you pick the hexagonal piece out of the monitor, brilliant video as always.

[@DIYMachines]

Thank you very much! 🙂

[@muhammadmirza9455]

Dude, your videos are absolutely awesome The videography, conceptualization, design and execution - I love it I've been binge watching your videos and can't wait for the next episode Keep up the great work pal.

[@DIYMachines]

Glad you like them!

[@shadowheart43]

Amazing, informative video as always!

[@DIYMachines]

Glad you enjoyed it. Thank you. 😊

[@NicoArtLife]

I just got this desk! I’d love to see how you put it together 😊

[@some-random-guy-l4r]

I love your projects

[@DIYMachines]

Thank you so much.

[@Enderkruemel]

I Always used an esp32 without any level shifter to control my led Stripes. It always did work just fine, only the esp shouldnt have an long cable run to the first led. 50cm for me did work fine , more can be lead dto some Problems if using an resistor on the datapin. I use 150Ohms to protect the pin and also i use an old ir reciver to concol it via the common rgb remotes.

[@olep2613]

Happily nerds like us like to stay inside. So it‘s no problem the door is blocked by the desk.

[@DIYMachines]

🤣 If you're a short nerd then just raise the desk and you're still good. 👍🏼😁

[@thomas-gomes]

😂

[@seniorcrasin5670]

Мне очень понравилось!!! Крутое рабочие место!!!

[@adrianhardcastle9297]

Nice! Mind me asking which hex storage system you used, I think there’s a few now but not sure which is best, also love the instructions always clear and no steps skipped (hate that!) thanks

[@DIYMachines]

Thanks. Sure, I used this one: www.printables.com/model/152592-honeycomb-storage-wall I agree, I started the channel after I tried to follow another makers project and realised how much they didn't bother to include in the video - skipping parts which were needed to succeed.

[@adrianhardcastle9297]

@@DIYMachines your doing really well, 96k subs on only 43 vids that's phenomenal you must be doing something right (if anyone suggests changes - don't!) - keep it up!

[@gerryclemonsii]

Can the standing desk get a little lower for sitting at a normal level? It seems like its pretty high, more for a stool seat at its lowest pont. I really love the style of this desk, i hope it gets lower

[@3dPrintCreator]

Now I am wondering if the desk can be moved up all the way so it forms a tunnel to your garden. :-)

[@DIYMachines]

I can confirm yes it does with a slight ducking, and thankfully that door opens outwards. 😊

[@balls2bone]

Doesn't really work when you have 10 3d printers though!

[@DIYMachines]

No, you would struggle! I can just about fit three along the fixed desk on the right. I guess there's always more space on the Z-axis! 🙂

[@pgrvloik]

Looks like a waste of electricity