Making Titus's Helmet from Space Marine 2

[@Felix-Lord-of-Vespator]

I love how the quality of your videos is always increasing. It is at a really high level now and the two of you have such good dynamics. I‘m already looking forward to the next videos.

[@GalacticArmory]

Thank you so much! We have lots of ideas!

[@crispy_338]

When Bambu comes out with a larger build plate printer I’m going to pump out so many helmets

[@GalacticArmory]

You and me both

[@Scarytoaster1809]

I'm literally getting an A1 just to print helmets lol

[@awildridehome9469]

Qidi just released the plus4, which is the perfect cosplay printer if you ask me! It’s 305x305x280 sized, and it has an active heater at 65C so your ASA/ABS prints can be extremely durable. ASA/ABS is even easier to sand than PLA, or you could make a vapor-smoothing setup with acetone to skip 90% of the post-processing. You can also use acetone to chemically weld your prints, so that the gap between prints is just as strong, if not stronger than the rest of the print. The Plus4 also costs only 800USD, and has an AMS releasing in the first quarter of next year. Qidi also doesn’t spy on you like Bambu, and has the greatest customer service of any 3D printer company.

[@crispy_338]

@@awildridehome9469 800 is pricey for a not very well respected brand name printer

[@Dread_2137]

​​@@awildridehome9469it will be a bit tight, but if you do it sideways it could actually work Only 800$, I would love to have an American salary for 800$ to be only and not as much 💀

[@ImmortalReaver]

I'm working on a helmet now but will likely do a custom paint job. Probably black and red. But excellent idea with the weathering with a cotton swab and mineral spirits. Going to give that a try! I started doing the black wash how you guys did it in this video and the Helldivers one and it's a game changer. My B01 armor is by far my best paint job yet. I also use that Seymour filler primer. It's so good.

[@Geomazing963]

Huge bummer, i just discovered you guys and starting getting files and missed out on the opportunity to sign up on patreon for the chaplain and a few other helmets. Still, got a few files to print from the shop and wanted to say thank you for slicing for smaller printers as it allows me to just fiddle with the position to get it to print. THANK YOU!!!!

[@GalacticArmory]

They're still available, just via the Specialist Annual Membership! And you're very welcome!

[@joeyjones4535]

That key is genius. Did we just witness the conception of the Galactikey???

[@BladeLigerV]

I am totally using this process on my Mandaloroan helmet. I will totally send in the results!

[@TheRendar]

Awesome!

[@steveneisen6705]

Is the .stl available for this awesome helmet?

[@Coziesk4rma]

Can't wait to print and put together y'all's fallout nv ranger armor. gorgeous work

[@obi-wankenobi3477]

For the emporer

[@masterasia4175]

EMPORER ??? HERETIC!!!

[@moxxi761]

now i need a sisters helmet

[@boanoah6362]

One complaint, behind the tubing should be a solid plate, there really shouldn't be an open gap like that, they're meant to be environmentally sealed for a reason.

[@codymillholland5353]

please for the love of Terra make a mark 4 helmet! I would buy it in an instant

[@simplesimples]

Any opportunity to purchase the helemets we'd want, for those who cannot afford the annual price? Would be really great..

[@GalacticArmory]

Normally the helmet files would be leaving the monthly rewards folder at the end of October but we're going to keep them around until the helmet contest is over. This means you can get all the SM2 helmets until the end of November.

[@simplesimples]

@@GalacticArmory Did this the other day, the FOMO was real. Thanks for extending!

[@SpaceRider34]

Did you use dyed red lens for the Titus helmet

[@mikevosi]

Question when you apply the bondo do i need to sand it first then primer or bondo then primer then sand it idk if the 2 make a big difference

[@brodypeterson6619]

Full suit in the future🤔

[@GalacticArmory]

It's up now on the Patreon! www.patreon.com/posts/new-files-power-114694012

[@georgee9250]

Two questions dogs! One what do you use or do to get moisture out of your filament cause they seem so smooth! Two any plans to release full armour stls for your patreons!?

[@GalacticArmory]

Filament dryers are the best, but we're just using standard PLA for this build. And It's up now on the Patreon! www.patreon.com/posts/new-files-power-114694012

[@jonhillyer7480]

I love the key idea! It looks super helpful. I noticed you dont do the soldering iron welding technique anymore. Is the super glue and activator solid enough to keep the pieces together long term?

[@HeroOfTheWeb]

I would imagine the bondo probably helps with it so they thought CA would be fine for the initial holding.

[@bofdar]

Any chance a chaos helmet might make a video appearance?

[@howcan11]

For the greater good 😉

[@CountZap]

One thing though other than an actual campaign the armor of the space marines is completely refurbished by the marine itself, the chapter serfs or a techmarine, they don't let the armor remain damaged for long, if there is a small pause in combat it is one of the first things they do. it does get damaged though so it still makes sense just all the damage is usually from a single mission or campaign..

[@thorodinson1277]

What settings should be used on a neptune 4 max to have this print nicely, ive tried about 5 times and all failed.

[@rotciv1577]

What laser leveler do you recommend? Love that idea just don’t know which one to get.

[@GalacticArmory]

Any straight laser will work but one that has a 1/4" mount will be very handy

[@astrofordummies8157]

What is the 2 part glue and activator?

[@Stab_GalacticArmory]

We use MITREAPEL Ca Glue with Activator. But there are tons of different kinds you can use.

[@Knownascomic]

It’s not necessarily Titus’s helmet it could be any ultramarine Lieutenant

[@HeroOfTheWeb]

These days its more basic to hate on Ultramarines. It's so cliche that people do it without knowing why the hate started in the first place.

[@reasonableguy9090]

Definitely my favourite. I even confirmed it with the ‘What Chapter am I’ test/questionnaire! 😊 Courage and honour! 🌿XIII🌿 🫡

[@thebull9212]

Is it possible to print this in resin?

[@ScytheNoire]

What build plate size would be required to print in one piece? I see they can fit 24" heads often, from website, but doesn't give dimensions externally.

[@Stab_GalacticArmory]

Roughly a 300x300 would be needed to print a helmet- give or take depending on how you need to resize your helmet. I've done full helmet prints on Neptune Series printers, but the print quality on the Bambu Lab printers is hard to beat.

[@Thereallouisjr]

This is like building a giant miniature

[@ryanmiller8090]

are you finishing the armour set?

[@GalacticArmory]

It's up now on the Patreon! www.patreon.com/posts/new-files-power-114694012

[@nightfoxproductions3018]

How much filament did this use aproximately

[@Stab_GalacticArmory]

Depending on your slicing settings, most GA Helmets use between 1 to 1.2 rolls of filament. I've done plenty helmets with less than a roll of filament used.

[@handlethecraft]

Little tip / recommendation: use Tamiya masking tape, it is made to use on round shapes and easy to form. Much better than the blue painter tape

[@MjrProps]

I usually do, but lost it when we moved studio 😅

[@handlethecraft]

@@MjrProps haha! Well at least you knew about it :) happy printing/ painting :)

[@codybates2419]

What size for the hoses? Left the holes but wondering what kind of hose tubing to buy and use?

[@MjrProps]

The link to buy the hoses are in the video description!

[@codybates2419]

@@MjrProps saw those was just wondering if there was something I could snag at the local hardware store that would work too.

[@dpm911]

can you do a tutorial on how to do the x key, please? that method would come in handy for so many helmets that need to be cut up to fit on the bed

[@Stab_GalacticArmory]

Personally, what I'm doing is taking the key STL from the file set and using it in my other builds- but do that at your own risk.

[@bradanderson9795]

What bondo are you using that doesn't need to be mixed first?

[@GalacticArmory]

Bondo Glazing and Spot Putty

[@Onduhsen]

Any chance you will release a chainsword?

[@GalacticArmory]

Yes we're working on one that will spin now!

[@AshtenVR]

I need this lol

[@SkjaldJorr]

could yall make a phobos armor set please?? for the life of me i cannnot find the boots and leg armor

[@flatlineforge5119]

BROTHER

[@Stab_GalacticArmory]

May I have some oats, brother?

[@flatlineforge5119]

@Galactic_Stab no ƁŘŒȚĤƏŘ they are my öāț§

[@Stab_GalacticArmory]

@@flatlineforge5119 I am starving, Brother!

[@ithilliongaming8980]

Will you be making an armor eventually?

[@GalacticArmory]

It's up now on the Patreon! www.patreon.com/posts/new-files-power-114694012

[@flippalink]

Please create full space marine armor🎉

[@GalacticArmory]

It's up now on the Patreon! www.patreon.com/posts/new-files-power-114694012

[@jamesobrien-b7y]

the cans of gw stuff are great but expensive.... keep on their good side lads haha

[@TheraghorRuinbane]

Black legion when?!

[@chestercopperpot8647]

Amazing work! Is there plans for Mark7 helmets? I guess I’m from the oldschool🤣

[@wyattstueven]

Quick question, will these file eventually find their way to your store as well or are they going to be patreon exclusive forever?

[@GalacticArmory]

@@wyattstueven patreon forever

[@matthewsharman591]

Will you make Titus full body armour?

[@GalacticArmory]

We've already made the files, but we are planning to do a full build in the future.

[@matthewsharman591]

@GalacticArmory look forward to it

[@HenloduToit]

I became a monthly patron just to get this helmet but where do I find the downloads?

[@GalacticArmory]

@@HenloduToit it's the primaris helmet

[@HenloduToit]

@@GalacticArmory thank you for your fast reply! Got it, busy printing!🥳

[@ImmortalReaver]

Lifesize Titus when?

[@GalacticArmory]

.....

[@davidgillard4995]

Do you sell printed, unfinished helmets?

[@GalacticArmory]

We only have these as files on our Patreon, but you can see all of our physical helmets on GalacticArmory.net

[@jaydacoyote7068]

Is this airsoft improve?

[@thermoshok]

so this file isnt available anymore?

[@MjrProps]

It's available through our Patreon right now!

[@thermoshok]

@@MjrProps which tier i need to go for?

[@MjrProps]

@@thermoshokSpecialist

[@thermoshok]

Ok ty

[@OKAMIKNIGHTS]

please make the full body armor so we can build it. GOD PLEASE MAKE THE SHIELD !!!

[@GalacticArmory]

Check back on our Patreon soon...

[@MrSmiley0000]

It looks like you're close to the Chaplain helmet; just replace the mouth part and the top part with the Chaplain skull, and then it’s done. It’s the same helmet-that’s the only real difference.

[@greatwargaming2924]

Well yeah, it’s still space marine armor with a different face plate

[@jchang5519]

so ✨HD✨

[@TvoRak]

The Visor costs 20€ shipping to Austria :/

[@BMS_Private]

Now we need Space Crusaders to take Space Jerusalem 🦾

[@TheEvilnickademus]

Anyone have the files now that they have been removed by games workshit? - reach out to me ill buy it.

[@GalacticArmory]

Please read the community tab for updates.

[@codyt3795]

Please, for the love of god, consider the victrix honor guard.

[@VoyTech3D]

Very nice build, the model is made very well. The paint job is not entirely to my taste-although professional, it still gives the impression of being a 'plastic toy' or figure. (Perhaps this is a deliberate effect to reflect the texture from Space Marine 2.) In my build, as shown in my avatar or the last video, I aimed to achieve the effect of a 'real' helmet that has survived 200 years of constant war. Of course, this is a matter of personal taste. Nevertheless, it is a very good prop!

[@benjwillo]

tbh after watching the video still no clue how they built it, can you show the process more and not sit at a table talking about it, cheers

[@JustGeorgiaxD]

You could always look at their other videos

[@JustGeorgiaxD]

Wait, they literally show you how to put it together in this video?

[@astronomyphilly]

​@@JustGeorgiaxDWhat video were you watching?

[@Bomfunknight]

I want the chaplins skull helmet

[@GalacticArmory]

Coming real soon!