Making Umarex Origin REGULATED

[@Ferra3904]

I would recommend using heat shrink tube for centering the baffle on barrel. It will be more consistent.

[@gunner5178]

Thanks for this video. I just finished my regulator modification. i used the Lane regulator for the Diana Stormrider. Yes I had to drill a breather hole in the tube. I am pushing a .22 cal. 18gr JSB at 815fps. On the reg set at 1800psi.

[@SuperPete276]

Awesome, how consistent are your FPS?

[@gunner5178]

@@SuperPete276 with a 33.95 JSB MK2 I got an extreme spread of 18FPS (656-638 FPS) and a extreme spread of 1.8FPE (32.5-30.7FPE). .25 cal.

[@gunner5178]

The info on my first post was incorrect. it was for my Hatsan Flash with a Huma reg.

[@gunner5178]

Thanks for the video. This is great. You put a bug up my butt. I have a Lane Regulator and end gauge on their way to me. I have removed the plunger from my Origin .25 cal. he end gauge is also the new fill port. It is for the Gamo pcp. I'm hoping it will fit. Again thanks for the video.

[@locksmithsilva1163]

That’s awesome thank you for the video.

[@Cicretsqrl]

Great video. Thank you. I see Altaros is out of stock but I have 1 extra regulator if anyone wants one.

[@awall1012]

If my gun is leaking out the air gauge on the gun when I pump it up do you think that is a O-Ring? I just got it for Christmas and only shot it around 10 times then all the air went away after the last shot and now it comes out the top of the gauge when pumping it up

[@chriscaz1239]

Another great video. Nice M44 hanging up.

[@SuperPete276]

Yes sir. thank you

[@IL-Hunter86]

Great videos! would the huma-air regulator for the stormrider work in the origin?

[@SuperPete276]

Yes sir, it will

[@IL-Hunter86]

I ordered the huma-air and it has to be vented. Im not sure im going to get it to work in the origin ​@PeterRebristy

[@SuperPete276]

@@IL-Hunter86 Correct, vented regulators require hole drilled, not recommended.

[@IL-Hunter86]

​@@SuperPete276have you had a chance to shoot a few shot strings with the regulator that you installed?

[@SuperPete276]

@@IL-Hunter86 Yes, so, 25 caliber, 32gn slugs from 4200PSI to 2000PSI with regulator set to 2200PSI I was able to shoot 32 shots 805FP with standard deviation of 5 FPS. Rock solid.

[@evanixar6]

Were aré the test videos ;(?

[@SuperPete276]

Sorry, I sold the gun and got me FX Crown :(

[@byrankirkpatrick4786]

Was it worth doing or time spent ​elsewhere ?@SuperPete276

[@hugohernandezandrade2053]

I have had a Umarex Origin rifle for 2 years. Today I wanted to increase the speed. The madv that it gave is 811f/s and it has no air leaks. Could it be that the spring is expired? What can I do to speed up?

[@SuperPete276]

Only way to speed it up is more PSI, it's regulator is fixed, so there is no way to increase pressure and speed. You need to make it regulated, so you can increase pressure and get more speed out of it.

[@scinner28]

Man very nice clip ..but my fill port is broke?it his air like a madman..is there a fix also?i put in my probe .i took it out and it leaked like a madman.how to fix that ?

[@SuperPete276]

that you need to contact UMAREX for, its internal, I don't think you can fix that, should be under warranty

[@Robert-kk1cn]

1st mistake was buying this pos. It willNever live upto its xaggerated lies & performace

[@richardlopez9300]

It's fine the way it is. Tweekers always got to take something apart. 😅