Man Builds Amazing Full-Size HELICOPTER | Start to Finish DIY by

[@QuantumTech]

Go check out Do Doan from Vietnam 🚁 Go follow his journey as he builds step by step the incredible Avatar helicopter! kzbin.info/door/KGk7_4-X3VjQUFzf0LU6FQ

[@jafarkochaki6449]

❤

[@잠자리-v1z1i]

대단합니다 짐념하나는아무 설계도 없이 하나하나. 수정해가면서. 만든다는게 황공기 설계부서에. 취직 하세요 완성된 작품보면. 분명 당신을. 스카우트 할께예요 🎉🎉🎉

[@JjBb-h5g]

This is stupid or what

[@SENTINELA-X1J]

NÃO entendi Bobo

[@5905-k8v]

what type of welding is this?

[@maulanaanam5505]

Org indo memang tempatnya org2 kreatif ..hnya Sj blm di kasih wadah / utk mengembangkan kecerdasan nya ..sukses sllu ya....mdh2an akn di kembangkan oleh pemerintah amiin

[@full876]

tpi itu bkn orang indo😂😂

[@ollipolli6325]

Je ne sais pas quoi dire, je suis littéralement scotché ! A ce niveau, ce n'est pas juste un excellent bricoleur, ni un as du bricolage, c'est un dieu du bricolage !¡! Absolument fantastique ! ❤👏👏👏👍

[@Ralph2]

Severe dedication to the task, amazing result! For a while I thought it was supposed to fly and I'm looking at the hefty metal and tiny motors thinking this guy knows something I don't. All became clear in time, though the subtitles were wrong in that this design of rotor creates no turning moment on the hull, a small but important point. Well done Do Doan, much respect.

[@ollipolli6325]

I also was really thinking he was going to fly with it! 😱🥵😖🤔🤗

[@AgusSalim-et1di]

Luar biasa sekali ❤❤❤

[@jacksemporiumofstuff]

The guy has talent. He should work in the film industry.

[@АндрейЕпишкин-г1ь]

Шикарно и красиво молодец Удачи тебе

[@markadams2667]

Hollywood is dead though

[@markadams2667]

Hollywood is dead though

[@CreativeHandworks]

This video is a masterpiece! Your attention to detail and the way you presented the information was outstanding. I especially enjoyed how you broke down each part of the topic and provided clear, actionable insights. This is one of the most informative and well-produced videos I’ve seen. Keep up the excellent work

[@chuckintexas]

Absolutely !! _I_ thought the VERY same thing !

[@evesanchez2157]

I got so many questions…but, wow! This team needs a standing ovation. 👏👏👏👏👏👏

[@LyRepairGirl2109]

I am from Viet Nam, and once again I am surprised by his skill

[@Василий-е1с]

А зачем?

[@massudcnee6649]

before you ask him any question, my sugestion for you is look closely at him, he lives in the village, using a very simple tools (no high tech at all..)I would give him 10 out of 10. no less!

[@zisiis-cp1vr]

really???🤣🤣🤣🤣

[@wenderleao4580]

Ovação???😂😂😂. Vai jogar ovos neles?😂😂

[@elianasa5226]

Fantástico!!!!!😮😮😮😮👏👏👏👏👏👏👏👏👏

[@NamfonSato]

Ibuprofen has not be the opportunity will ever come back from your business 💯 👌 😒 😕 🙂 🙃

[@ridunservischannel]

Wow sungguh luar biasa sekali proses pembuatan pesawat yang menggunakan bahan sterefom endingnya sunggu sangat menakjubkan ❤❤❤❤❤❤❤

[@SEVIASCASEVIA]

Kocak

[@Anoges160]

Absolutely world class. The highest level of detail. And everything made from styrofoam. Huge respect for this handiwork.

[@서면니나투]

구독자가 1470만 와우 어마무시한 구독자를 보유하고계시네요. 처음봤습니다 🎉

[@ПареньМодный-у1м]

Просто потрясающий уровень моделирования парень красавчик смог сделать так что когда смотришь думаешь да как он так смог

[@FredDavis-u7x]

И не говори

[@nurullahsak1892]

Tasarım, fikir, emek, mühendislik ve işçilik mükemmel. Sadece parlak bir boya bu çalışmayı olağanüstü bir şeye dönüştürebilirdi. Boyama işini uzman birisine yaptırması daha iyi sonuç almasını sağlardı. Ayakta alkışlıyorum 👏 👏 👏.

[@Владимир-э9ь2г]

Спасибо!❤❤🎉

[@denarni3405]

Я думал что он должен в конце ролика взлететь))))

[@dmitrykaplun9063]

Я тоже сначала так думал. А теперь думаю, сколько труда, вот нахуя? Что-бы что? Может это натурный макет для съемок фильма "Аватар"

[@ГригорийКирин]

Нет милые, он полетит и вертолет и парень.

[@moro-4684]

А мне понравилось на 3:45 как он заготовку прижимал обеими руками в белых перчатках и большим пальцем правой ноги.

[@Лирикофизике]

Когда однажды станет скучно на это смотреть, кто-нибудь прилепит к этой штуке четыре подходящих моторчика с пропеллерами и она полетит, как, впрочем, полетит и обычное кресло. Не работать там просто нечему.

[@4to-proishodit]

А я думаю что не полетит. Т.к. не хватит движков, а если поставить более мощные и тяжелые не выдержат крепления, короче штука опасная может убить

[@Wolverine1228d]

Doan, you should be working for Hollywood.. I didn't miss a second of this nearly hour long video and I STILL want to see more! Great work!

[@suryonohp3391]

Oo anak muda Vietnam 👍👍👍 moga2 ditiru mahasiswa Indonesia dg teknologi yg lebih canggih di DI Bandung ❤❤❤

[@YanDi-d8c]

Percuma ga bisa terbang 🤣🤣🤣🤣

[@JumadingBading-n4v]

Mantap 👍👍👍💪

[@rhiezhalikhsan]

Oke mantap sobat aktivitas kreatif salam damai sehat selalu

[@Sergeyvysotsky-rg6yx]

Рутан удивлен изысканностью своего изобретения. Точный крой и качество изготовления соответствуют элегантности формы.

[@tekknorat]

Good to have so much spare time.

[@mcmach1]

Good to have a phone you can watch TV on with good internet

[@Compliment_Thief]

@@mcmach1what’s that supposed to mean lil buddy?

[@yangagra995]

Должно быть продолжение, уже с двигателем... 😉 желаю успехов! 👏👍

[@vhamusanda]

He knows what he's doing. The only thing is to find him and turn this great talent into something that can really fly, wooooooow, a round of applause 🙌 👏 👌 to him

[@dannmohr5721]

What a craftsman so what if it’s foam he is still an amazing craftsman👍👍👍👍👍👍👍👍👍👍👍👍👍

[@wongpitoe7299]

Mantab👍👍👍👍

[@arifrinaldo-z1h]

Ini anak bangsa yg perlu di perhatikan saya kagum dengan konten yg selalu di adakan rapi dan bersih dan jadi

[@muhamadnazar5043]

Orang Vietnam lah jgn overclaim

[@AlvinMandacan]

Mantap Buat mainan anak2😂

[@ErwinsaputraSaputra-np9ur]

Masya Allah ❤❤❤❤❤

[@linefu]

The built was so cool that they had to lame it down by coloring bright red and yellow with patches😂. Jokes aside great buid guys hoping to see more❤

[@DanieKoch]

This guy must go for engineering. Very good model. Got a lot of potential

[@cristobalramirez7322]

Increíble creación llevada a cabo con precisión de bisturí y en forma automática, sin planos, admiración por tal trabajo💯💯👏

[@manguyuy]

Amazing, you guys are so talented... 👍👏👌💪

[@Phien-yo5iz]

สุดยอด👍👍👍👍

[@CampingSurvivalBtgCS01]

Penyelesaian yang sempurna. sungguh kreatif 👍🎉🎉🎉

[@thesandman8642]

Creativity, craftsmanship, patience! When you have to create your own tools to do the work, that's ingenuity! Well done Dan and team!

[@wongcilikgd12379]

Is the best...👍👍

[@GiovanniLentini-y5z]

Fantastico....in pantaloncini e spesso scalzo hanno costruito un elicottero anche moderno. Il progettista e costruttore meriterebbe un Nobel ❤❤❤❤❤❤❤

[@iskandarkhairanordin5841]

hy i from Indonesia...we love🇧🇩🇮🇳❤️🇮🇩brotherhood

[@dhenoyznero]

MALAYDESH

[@MrRaymond1021]

I've should have known it wasn't a flying helicopter, but by the title of the video I was seriously impressed either way. Thanks for sharing this is a fantastic video. 👍👍👍

[@SriArjuna-b9h]

Wow amazing🚁👍 bisa direkrut nih ke IPTN 🚁

[@xhaws3291]

عمل جميل 🤩

[@chuckintexas]

Absolutely STUNNING ! Some of the best hero-modeling I think I've ever seen ! ALL the _best_ to the *TEAM* - from Texas ! - Chuck .

[@cobblerama]

Beautiful! IMO I think a matte black/olive drab would have been a better color choice. It would look closer to the film version and also help to hide any rough surfaces. Still very nice work!

[@permakcimindi-si4gc]

❤🎉keren

[@eliassantossantos1933]

Bem criativo.... show 👏👏👏

[@jinekajine4495]

Support Untuk Anak Bangsa.. Keren Maju Terus.. Bravo Produk Anak Negeri ❤💪

[@sakahayangurang9600]

Bagus pisan hasil kreatip nya👍

[@frankjames4743]

Freaking amazing build at that size. Well done concept copter

[@LyRepairGirl2109]

perfect

[@zisiis-cp1vr]

amazing styro?🤣🤣🤣

[@arhimedusprcnik6332]

Brilliant. Human ingenuity knows no bounds

[@kushbaba1194]

Let’s make this fly

[@bambangharijaya3316]

AMAZING !.. Saya di buat takjub melihat karya anda Bro..✊️⭐️⭐️⭐️

[@AbdulHarisMokodompit]

Bisa buat pajangan di halaman rumah 👍👍

[@Suskun_akrep]

Uçacak diye bekledim 50 dakikalık bir zaman kaybı ....

[@chuckintexas]

No , this was no waste . You got to see some EXCELLENT technique and you got a look inside some of the best conceptual Hero-Modeling by an amateur , _anywhere_ . While _clearly_ NOT his intent , this kind of model making has a DIRECT function in Hero-Modeling , which is HUGE in movie making . Yes LOTS is done with CGI , but the Hero Model is used where details are needed and true form-fit-&-function to match story-boarding are needed . This guy's work here is EASILY equal to the BEST of the basics needed to get started with a modeling company making more sophisticated examples .

[@popokakatepetl]

После того как он поставил двигатели, ясно стало, что ЭТО никуда не полетит)))

[@Monkycrasure-gk4fz]

@@chuckintexas you don't get to decide what someone else considers a waste of time. It made it sound like some dude made a real homemade helicopter. Not a model. It was a waste of time to me to cause i was waiting for it to fly. I didn't click on video to see big piece of styrofoam cut and glued 742 times.

[@dannprairie9202]

I would have been satisfied if the final model had been the same as the one shown in the video thumbnail, but it doesn’t even come close. Upon closer inspection, you can tell the thumbnail was made with artificial intelligence, MidJourney style

[@grounddove]

@@Monkycrasure-gk4fz Then, when you saw the motors why did you continue watching?

[@4evrplan]

I've never seen someone do so much free-hand shaping with a hot wire. I enjoy the old-school fabrication techniques, though, instead of 3-d printing everything.

[@chuckintexas]

ABSOLUTELY !! The older techniques like THIS one have MANY advantages over the short-cut techniques getting the most attention these days 👍 . While _clearly_ not his obvious intent , this kind of model making has a DIRECT function in Hero-Modeling , which is HUGE in movie making . Yes LOTS is done with CGI , but the Hero Model is used where details are needed and true form-fit-&-function to match story-boarding are needed . This guy's work here is EASILY equal to the BEST of the basics needed to get started with a modeling company making more sophisticated examples .

[@Compliment_Thief]

The thumbnail is a different model!

[@Rian_Lau_Rider]

Keep to create 🙏🙏🙏❤🙏🙏🙏

[@emieterte1563]

If it doesn’t fly you’ve just wasted time and materials

[@x7u-y1i]

Just sell it to the white people, then. 😂😂😂😂

[@teguharifin2587]

He just got almost 10 milion views 😂

[@khaphurk4398]

Its hobby bro...

[@muhammadfahmy8080]

THIS IS ART BRO

[@rayrayra6851]

He got money from this view

[@RezosCristianos]

Give him a scholarship to study an engineer degree, he really deserve it, it's fantastic what he did

[@sergioa.s.5771]

he could make props for movies...thats it!!!

[@jhonc.3133]

You have all my respect; you are highly qualified to be a great professional aircraft designer. I hope some serious entrepreneur will sponsor your project and you can make this masterful work of art a reality. Congratulations, you are a genius.

[@wangjabtao411]

สุดยอดจริง😊

[@mohanMohn-lx4gu]

Waa very good thanks 🙏🙏

[@awesome-mz2lj]

다음은 아파치 전투 헬기 부탁해요~~~~

[@TheWadetube]

For a time I didn't know if this was meant to fly or not. But the underpowered motors for the blades made me see it is a prop and not a drone or RC helicopter. But I do have a suggestion for fun. Take a long bamboo pole, like 50 or 60 feet long, a very strong one and mount it on a post so that it makes a large swing arm of 40 to 45 feet, attach the light end to the helicopter and on the fat end put a few hundred pounds of weights so that the counter balance almost lifts the helicopter off the ground. Then replace the 200 watt little drill motors with some RC model motors of 1500 watts each or maybe 2250 watts to make 3 horsepower each, that's 3 times 4, so it would top out at 12 horse power and that would be enough to lift the helicopter off the ground with a light weight passenger, like a ten year old boy. It would be tethered to the long arm of the bamboo so it could not go beyond the reach of the turn of the bamboo on it's pivot post. Add or subtract weights on the other end to add lift to the helicopter for a heavier pilot and let them fly it around in circles, touching obstacles and landing on small structures and having some control of a kind of water missile that can be launched at a target or perhaps paint ball guns for attacking other targets. Have either battery power or a long extension chord coiled up inside the metal post to feed power to the motors. If you can't find or afford an RC motor from Hobbyking.com then you could use vacuum cleaner motors from shop vacuums as they are quite powerful . This could be a money making ride once you learn how to make it safe for kids.

[@NdibaiSallah]

Are you an engineer

[@nelsoncasimirocasimiro2792]

Yes my friend,I can make this fly R\C,very well said with the vacuum engines.....the structure will hold,some adding of electronics and I can see it in the ar....?

[@TheWadetube]

@@nelsoncasimirocasimiro2792 As a fun ride I believe it would word and you could charge a small price or have a donation box. You could do the same thing with the star wars X Wing with ducted fans in the wings.

[@mihaib9239]

how about the safety of the passenger ?

[@카치나-s2x]

진짜 날 수 있는 그걸 만들고 있다는.... 내 기대.... ㅡ.ㅡ

[@Paulo-p7g]

eu queria ver este fantástico Helicóptero 🚁 construído por esta fantástica equipe nos ares .mais valeu demais. Abraços

[@venjyowa]

Bro i proud of you, you make me cry man, that is so beautiful ❤❤❤❤ i love that

[@garethmccullough390]

He should try building one that looks similar to the one on the thumbnail we all click baited on.

[@Lifecoach7Ra]

Should stop that shit showing thumbnails that do not match. That is not serious!

[@BANGLAYSIA]

teruslah berkarya.semogah kedepanya akan menjadi yang profesional.bisa membuat pesawat standar nasional...

[@catmorning2515]

Good😅

[@SoundsRelaxation2025]

Wonderful wonderful amazing ❤❤❤

[@nelsonhuynh8392]

These guys are unbelievable. 👍👍

[@marvinrandolph3731]

CAN IT FLY THOUGH THAT'S WHAT IS IMPORTANT

[@guleranakhan2418]

That’s exactly what I was thinking 🥸 (Hats off it is very creative)

[@Tampo-tiger]

Am I the only person who didn't realise it would never fly until he was building the rotors and, seeing him overlap the fibre glass cloth thought that didn't seem strong enough for the purpose? I must be a bit slow, ha ha.

[@darrylbrown163]

there was potential in this design...

[@Pato-w9y]

lets just say it's a prototype so whoever wants to build d real thing can always take a look at this maybe like hacksmith's channel

[@vilujanin]

Нелетающая модель вертолёта в натуральную величину.😊

[@chuckintexas]

EXACTLY ! This was _intentionally_ done as a static display . It had "fearures " but the structure AND the motors , etc , were NOT designed with an intent to actually FLY. Here - we got to see some EXCELLENT technique and we got a look inside some of the best conceptual Hero-Modeling by an amateur , _anywhere_ . While _clearly_ NOT his intent , this kind of model making has a DIRECT function in Hero-Modeling , which is HUGE in movie making . Yes LOTS is done with CGI , but the Hero Model is used where details are needed and true form-fit-&-function to match story-boarding are needed . This guy's work here is EASILY equal to the BEST of the basics needed to get started with a modeling company making more sophisticated examples .

[@RinoSyahputra-y7r]

Hebat, salut deh otodidak apa pendidikan formal Sayang durasinya k lamaan tp ya tetep aja ngikuti ingin tau hasil akhirnya

[@IvesMarcelin]

Sublime 👍ce gars est un excellent Maquettiste ✨✨✨✨✨✨✨✨✨

[@UniqueCardboard.L]

Guys! According to you, when should the fly car...... 👇 run? 🤔

[@convert.098]

Next Week 😄

[@adzoutnabout888]

It will fly….. straight to landfill.

[@kevinschneider1820]

You got better quality control than Boeing

[@أمميار-د8خ]

■☆■ولولا أذ دخلت جنتك■☆■ ■☆■ قلت ماشاء الله ■☆■ ■☆■ولاقوة ألا بالله■☆■

[@vanMaifishing]

Cảnh đẹp tuyệt vời mình thích video của bạn rất hay ❤

[@Paulo-p7g]

Eu achei fantástico .parabéns pelo canal . so mesmo a paciência oriental . que coisa linda . parabéns pela maravilhosa ideia 💡 de construir um Helicóptero . e no tamanho Real .

[@mairofosana-nv5du]

Bro that helicopter made in foam?!💀

[@alimasters4473]

Зашел почитать в комментариях про БАНШИ Banshee из StarCraft 😅

[@ismaelburgos9194]

I was 48 minutes waiting to see the engine

[@tonyfalcon8041]

Just a park display, how can you build one ii just a backyard with household tools and can fly haha

[@Игорь-э1щ6ц]

Парень молодец ,дай бог тебе сил и здоровья на новые чудеса

[@AnNguyen-hn5gq]

Thanks!

[@moderndiystudio]

He does everything by himself, very admirable

[@waynemightymetalworksndoth4788]

Great job brother 👍

[@ChillingWithGus]

But does it fly? Lol

[@jeffbrown7246]

Why?

[@AvilaAnar]

😲😲😲😲😲wow❤❤

[@홍성순-h8b]

정말 대단 합니다 🎉🎉🎉

[@ВладимирСырейщиков-е3б]

Тот случай когда ты строитель, а думаешь что авиаконструктор😅

[@أمميار-د8خ]

■□■بسم الله الرحمن الرحيم■□■ ■□■ ماشاء الله تبارك الله■□■ ■□■اللهم صلي وسلم■□■ ■□■ على سيدنا ونبينا محمد ■□■ ■□■اللذي تنحل به العقد■□■ ■□■وتنفرج به الكرب■□■ ■□■ وتقضى به الحاجات■□■ ■□■ العجيبة الغريبة بأمره■□■ ■□■اللهم ارزقني■□■ ■□■ العزيمة الخارقة ■□■ ■□■الفضيعة■□■ ■□■ مع الحماية ■□■ ■□■والكفاية ■□■ ■□■من شر الشيطان الرجيم■□■ ■□■ وأن نقترف على أنفسنا■□■ ■□■ سوء أو نجره ■□■ ■□■ألى مسلم ومسلمة■□■ ■□■ يريدون ذالك ياحنانا■□■ ■□■ يامنان أرزقنا روح العجيبة■□■ ■□■تكوين الجنب والتعبير السديد■□■ ■□■ الخالي من الشوائب يالطيف■□■ ■□■ الطف وتجاوز وسامح ■□■

[@farhatplaygames]

Halo helicopter or avatar helicopter ??

[@Ibrahim85Official]

Sangat bermotifasi ❤

[@AlekseyG77]

Гараж рулит. 👍

[@townnet]

Cheat by the thumbnail lol.

[@calbrian5869]

Electric fan 🤔