4. How to section a cone and draw true shape of section

[@pallavichandimani9677]

a reallly good job.....by u...i have e.d sem tomo...nd ur videos are saving me ..on all most all topics...thanks....grateful to u

[@pallavichandimani9677]

i have already started telling all my frnz to checkk out ur videos...if any doubt

[@ManasPatnaikofficial]

Thanks Pallavi for appreciating my work. All the best in life.....

[@Schoolstudio056]

Pallavi love ❤️ you Subscribe my chhanel 😂 😂

[@altafsarfraz526]

Thank sir you Was easy to understand Helped me a lot during internal test...thank u once again

[@charanpatchipala6145]

A square prism of height 80 mm and base of diagonal 40 mm rests on the HP on its base with base edges equally inclined to the VP. It is cut by a section plane passing through the midpoint of the axis of the prism perpendicular to the VP and inclined to the HP. Find the inclination of the cutting plane if the true shape of the section is a rhombus of diagonals 60 mm and 40 mm sir I want answer to this question please

[@zaidahmedkhan1829]

Manas sir u are great ... I understand all the question very easily from ur videos.You teach in very good manner that eveyone can understand . thank you alot.Good job sir.🖒🖒🖒

[@Shaqcharles]

you know what, you are always incredible best ever of all youtubers in drawing.

[@gopalabhuyan4546]

Thank you Manas Sir........ Your explanation was great..... It cleared my doubts...... Keep up the good work.

[@ManasPatnaikofficial]

Thanks for your comments Gopala Bhuyan..... I am sure that these tutorials have been able to generate your interest in this subject All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit..

[@nikhiljain8303]

Thank u sir for giving us so much of precious knowledge. Sir u are really doing good & helping us. So sir thanks a lot once again

[@sanjanaswamiraju9546]

I am very grateful to u sir.. Ur way of explanation is very easy to understand.. Ur videos r very useful to us in the eleventh hour of our preparation.. Thank you.

[@thor-sonofodin6177]

Awesome work. Please more videos of sections and traces of lines as soon as possible

[@ManasPatnaikofficial]

Abhishek Chauhan sure man..... lot of stuff is yet to be upLoaded.....

[@raena_scraps]

cone, base 75 mm diameter and axis 80 mm long is resting on its base on the H.P. It is cut by a section plane perpendicular to the V.P., inclined at 45° to the H.P. and cutting the axis at a point 35 mm from the apex. Draw its front view, sectional top view, sectional side view and true shape of the section.

[@civilxoxo6884]

manas sir i have watched and downloaded all of your videos for engineering graphics and even shared with my mates...although you are so popular among students that you need no one to judge...but it is my humble request to please upload videos for machine drawing....because i have done excellent in my first sem finals thanks to you but i have not seen any video for machine drawing sir please can you help us.. with regards vasu pandita 2nd sem civil engineering

[@vinaydhage5444]

Hello, you videos are very good. Your explanation is great too but could you upload video tutorial for intersection of curves too? It would be of great help.

[@ManasPatnaikofficial]

Vinay...I will definitely make a video on that... But a bit later as i am working on ortho proj right now.... I promise that i will implement your suggestion...... All the very best...

[@Rezmsv]

Hi and thank you for your great explanation, I have a question though, is the final cross section an egg shaped ellipse?

[@vinniii3986]

S

[@sachinn15]

U r world's best teacher

[@fastrac321]

Problem 14-1. (ig. 14-2): A cube of 35 mm long edges is resting on the H.P. on one of its faces with a vertical face inclined at 30 degrees to the VP. It is cut by a section plane parallel to the V.P and 9 mm away from the axis and further away from the V.P Draw its sectional front view and the top view. This question tells about the position of cube

[@sekhardevalla]

thanks bro for up loding more its makes me very simple and easy your explanation is superb bro u can up load a videos of iso metric views , ortho to iso ,and iso to ortho we are very poor in that topics so plz up load the videis as soon as possible

[@ManasPatnaikofficial]

Thanks Imtiaz for appreciating my work.. All the best and do tell your friends about this channel so that all can benefit... Link to Orthographic Proj: kzbin.info/www/bejne/jXiZeWWmfriIsLM Link to Isometric: kzbin.info/www/bejne/bWjYl32Oq72IoZY

[@lakshminarayana5998]

Thank you so much manas bro.....your videos are very useful...... initially i scored 20/100 in EG but after seeing your videos i scored above 70/100....

[@ManasPatnaikofficial]

Great...... Keep it up......

[@knightartsproduction1916]

Bro neenga Tamil aah

[@knightartsproduction1916]

Bro sem ku Ivar oda vides matu ta paatingala bro solunga

[@lakshminarayana5998]

@@knightartsproduction1916 Ama bro... Ivar videos eh parunga..pathutu oru 2 problems workout pannunga..then ungalku easy ah irukum

[@knightartsproduction1916]

@@lakshminarayana5998 thanks bro

[@SShalini-ij9vu]

A Hexagonal prism of base side 30mm and axis length 60mm rests on one of its ends on the HP with two base edges parallel to VP. It is cut by a plane perpendicular to the VP and inclined at 30 degree to the HP. The cutting plane meets the axis at 30 mm from the top. Draw the front view, sectional top view and true shape of section. help with this question sir

[@jyotishikha-916-skp5]

In top view , you write naming with dash by mistake Please check it

[@OmkarPatil-kk2mb]

Sir please give me some hint to solve this kind of problem. A cone, diameter of base 60mm and axis 70mm long, is lying on HP on one of its generator with axis parallel to VP. A vertical section plane parallel to the generator, which is tangent to the ellipse for the base in the top view, cuts the cone bisecting the axis and removing the portion containing the apex. Draw its sectional front view and true shape of section. Also develop solid

[@francisfrancis4219]

I don't think those smooth curves are drawing the correct shapes. Certainly, the true shape of the section needs to be an ellipse, and perhaps the sectional top view ought to form a circle. Instead of drawing smooth curves, please investigate whether a true ellipse and true circle are able to pass through the necessary points of both views.

[@shivamnaik2460]

yea, for that you've to divide circle into more number of parts. maybe 12...

[@atharvajoshi8032]

Your videos are very helpful....Thank you so much!!

[@ujwal9792]

Tq.. So much sir when none of my freinds help me ur there sir

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@nikhiljain8303]

Sir please give solution of these three questions. 1) A hollow square prism, base 40 mm side (outside), height 65 mm and thickness 8 mm is resting on its base on the H.P. with a vertical face inclined at 300 to the V.P. A section plane, inclined at 30 to H.P., perpendicular to the V.P. and passing through the axis at a point 12 mm from its top end, cuts the prism. Draw its sectional top views, sectional side view and true shape of the section. 2) The projection of hemisphere 50 mm diameter, placed centrally on the top of the frustum of a hexagonal pyramid, base 32 mm side, top 20 mm side and axis 50 mm long are given. Draw the sectional front view when the vertical section plane H.T. inclined at 450 to the V.P. and 10 mm from the axis, cuts them. Also draw the true shapes of the sections of both the solids. 3) A sphere of 50 mm diameter is cut by a section plane perpendicular to the V.P., inclined at 450 to the H.P. and at a distance of 10 mm from its center. Draw the sectional top view and true shape of the section. Sir if u want to share me solutions personally then my whatsapp no.is-9928466781. Sir i will be very thankful of yours.

[@vinayakmahude4274]

Your video is very use ful Thank you so much ❤️💕

[@smadhavan1389]

Super job sir...clear explanation ....😎😎😎

[@ManasPatnaikofficial]

"THE MANAS PATNAIK LIBRARY" Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Projection of Point: kzbin.info/www/bejne/nHyXmWidgpxmrZo 3. Projection of Line: OLD: kzbin.info/aero/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: kzbin.info/www/bejne/pquoYXdjfs-rmpY 4. Projection of Plane: kzbin.info/aero/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: kzbin.info/aero/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: kzbin.info/aero/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: kzbin.info/aero/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: kzbin.info/aero/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: kzbin.info/aero/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: kzbin.info/aero/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: kzbin.info/aero/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: kzbin.info/aero/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: kzbin.info/aero/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: kzbin.info/aero/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: kzbin.info/aero/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: kzbin.info/aero/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: kzbin.info/aero/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: kzbin.info/aero/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: kzbin.info/aero/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: kzbin.info/aero/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: kzbin.info/aero/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0 2. Friction: kzbin.info/aero/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m 3. Shear Force and Bending Moment: kzbin.info/aero/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7 4. Trusses: kzbin.info/aero/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7 5. Centroid and Centre of Gravity: kzbin.info/aero/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p 6. Moment of Inertia: kzbin.info/aero/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy 7. Dynamics: kzbin.info/aero/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS Complete Playlist of ENGINEERING SERVICES EXAMINATION: kzbin.info/www/bejne/mZKYeqqep6iBmLM Complete Playlist of Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU Complete Playlist of Theory of Machines / Kinematics ofMachines / Dynamics of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M -- Manas Patnaik Videopreneur, Teacher and Mechanical Engineer www.manaspatnaik.in kzbin.info

[@sriramsakthivel8858]

Thank you guru ji.... Your teaching is just awesome👏

[@rakeshshahi6376]

Thanku for such video sir. From Nepal

[@ManasPatnaikofficial]

You are welcome Rakesh... All the best man... Cheers

[@rakeshshahi6376]

thanku

[@prakharsahu7145]

Great help man

[@ManasPatnaikofficial]

Thanks for appreciating Prakhar........ All the best in life.......

[@SShalini-ij9vu]

Really helpful sir👍🏻✨

[@manvirsharma7885]

really helpful

[@angothtarun6513]

Nice explaination sir 👌👌🏻

[@kaustubhhavanur8000]

Sir can you plz explain one problem in which the cutting plane is inclined to VP?

[@makwanaprashant3672]

Sir,here is one problem which i have no answere and i can't understood.Please solve this given: A tetrahedron of 50mm long edges is lying on HP on one of its face with one of its edges perpendicular to VP so that the true shape of its section is isoscale triange of base 40mm and altitude 28mm.Find inclination of section plane with HP. Draw the front view ,sectional top view and true shape of the section.

[@shashipreetham7386]

excellent explination now iam ready for my engg drawing exam

[@ManasPatnaikofficial]

Thanks for appreciating Shashi... All the best...And do encourage your classmates to subscribe to this channel so that all can learn Engineering Drawing in the best possible way.....

[@pranavkshirsagar146]

Great Man.... tysm... awesome work...

[@dhwajgupta9175]

simplest explanation I hav ever experienced in delp. of solids

[@ManasPatnaikofficial]

+dhwaj gupta Thanks dhwaj.... I hope you are finding my lectures helpful....

[@ManasPatnaikofficial]

Thanks for appreciating.... All the best man........ And do encourage tour friends also to subscribe to this channel

[@SS25SK]

Will the point A in true shape of section and top view be pointed or will it be curved ( just like it appears for points B, C etc.)

[@hirokjyotidutta4056]

Xcellent bro..!! Too good.. Thanks for the video..!! Will u make video on developmnt of surfaces also?

[@ManasPatnaikofficial]

"THE MANAS PATNAIK LIBRARY" Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English 1. Orthographic Projection: kzbin.info/www/bejne/jXiZeWWmfriIsLM 2. Projection of Point: kzbin.info/www/bejne/nHyXmWidgpxmrZo 3. Projection of Line: OLD: kzbin.info/aero/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV NEW: kzbin.info/www/bejne/pquoYXdjfs-rmpY 4. Projection of Plane: kzbin.info/aero/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg 5. Projection of Solid: kzbin.info/aero/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm 6. Section of Solid: kzbin.info/aero/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v 7. Development of Surface: kzbin.info/aero/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v 8. Auxiliary Plane: kzbin.info/aero/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB 9. Interpenetration of Solids: kzbin.info/aero/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM 10. Isometric Drawings: kzbin.info/aero/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83 11. Conic Sections: kzbin.info/aero/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ 12. Cycloidal Curves: kzbin.info/aero/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z 13. Involute: kzbin.info/aero/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa 14. Plain Scale and Diagonal Scale: kzbin.info/aero/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9 15. Complete Engineering Drawing in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi 1. Orthographic Projection in Hindi: kzbin.info/aero/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY 2. Projection of Point in Hindi: kzbin.info/aero/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH 3. Projection of Line in Hindi: kzbin.info/aero/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir 4. Projection of Plane in Hindi: kzbin.info/aero/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U 5. Projection of Solid in Hindi: kzbin.info/aero/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P 6. Scales Hindi-Urdu: kzbin.info/aero/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB 7. Section of Solids in Hindi: kzbin.info/aero/PLIhUrsYr8yHz2Sv6RNP9c5owe5Sic1IMC Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English 1. Forces: kzbin.info/aero/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0 2. Friction: kzbin.info/aero/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m 3. Shear Force and Bending Moment: kzbin.info/aero/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7 4. Trusses: kzbin.info/aero/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7 5. Centroid and Centre of Gravity: kzbin.info/aero/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p 6. Moment of Inertia: kzbin.info/aero/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy 7. Dynamics: kzbin.info/aero/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z 8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: kzbin.info/aero/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS Complete Playlist of ENGINEERING SERVICES EXAMINATION: kzbin.info/www/bejne/mZKYeqqep6iBmLM Complete Playlist of Machine Drawing: kzbin.info/www/bejne/n3emn3mLh556msU Complete Playlist of Theory of Machines / Kinematics ofMachines / Dynamics of Machines: kzbin.info/www/bejne/eaCXip-Xq6ijm7M -- Manas Patnaik Videopreneur, Teacher and Mechanical Engineer www.manaspatnaik.in kzbin.info

[@nishaantmadhan3092]

it helped me a lot.. thanks a ton

[@kalyanirani2942]

Sir form where we have to place protactor for measuring 45degrees from axis line r not?

[@rabiyabasri762]

From axis line in this pbm at 35mm

[@vishalmishra1937]

fabulous teaching

[@ManasPatnaikofficial]

Vishal.......Thanks for appreciating my work.... All the best in life I have also started making lectures on engineering mechanics Do check it out on my channel page... Do share and recommend this channel to your friends and classmates so that they can also benefit... Cheers....

[@sumann909]

If I cut the plane from object 's left side 45 degree then it is right or wrong ?? Plz reply fast ..

[@prabhub2k]

How are cutting planes (section planes) drawn?

[@PrakashPrakash-jn6go]

A cone of base 50 mm diameter and axis 70 mm long, resting with its base on H.P is cut by an auxiliary inclined plane making an angle of 45 degres with HP. Draw FV, sectional TV and true shape of the cut section when the plane bisects the axis of the cone.

[@rugveddeshpande5127]

Too good bro.....ur the best

[@upayande9997]

What is the software used for creating the drawing?

[@vincentnyamboko6596]

very nice and much understandable...............THANK YOU

[@AbdullahAnsari-ansari]

How u have taken arc the arc inside circle ??

[@fastrac321]

Problem 14-4/ ig. 14-5): A cube in the same position as in problem 14-1 is ut by a section plane, perpendicular to the VP, incined at 45" to the H.P and assing through the top end of the axis. (ij) Draw its front view, sectional top view. nd true shape of the section. ij) Project another top view on an auxilary plane, arallel to the section plane. Solve this please..

[@wasimniyaz6146]

Now I press the like button before watching the video

[@ManasPatnaikofficial]

Hi Niyaz... Thanks for your appreciation... All the best.... And do let your friends know about this channel on drawing and mechanics so that they can also benefit.....

[@basharatwani9035]

love u bro from kashmir

[@ManasPatnaikofficial]

Bashrat.....Thanks for the love...... I am sure that my videos are helping u guys... All the best man... And if by chance i do visit Kashmir.....You gonna have to serve me some delicious Mutton Biryani....Hahhahaaaa

[@Xjdhdhxhdhdd]

​@@ManasPatnaikofficial har jagah khane ki aadat hh kya?

[@EAbdullahSaad]

thanks a lot but i guess u shall be drawing one more arc corresponding to f' and g' to locate f & G point in top view

[@perfect_10]

A big thanks off you sir the clear explanation thank you sir😘😘😘

[@akashchauhan2322]

life saver!!thanks bro

[@ManasPatnaikofficial]

Thanks Akash for appreciating my work.. All the best and do tell your friends about this channel so that all can benefit...

[@poojareddy7549]

How to find the inclination angle of the section plane if true shape is ellipse of major axis 50 and minor axis 25

[@Rajat-Sharma1]

At 11:28, why is there a cusp on point A?

[@harshvardhansingh982]

Sir,those smoothe curves are needed to be drawn by free hand or by compass???....

[@uddeshdeshmukh2519]

French curve

[@innocentikileng5963]

hey i like skills..you made my day easy outakenya

[@chaitanyanaik3610]

a cone of base diameter 65 mm and axis 75 mm cut by a plane such t.s. of section is isosceles triangle having base 50 mm so how to draw cutting plane

[@ManasPatnaikofficial]

+Chaitanya Naik All right chaitanya....you gotta wait for a few days and i will surely make a video tutorial on this problem

[@chaitanyanaik3610]

+Manas Patnaik ok thank you

[@breakthecode9862]

How to get to know on which side sectional side view has to be drawn?

[@madankshetri577]

while drawing can we leave the vertical line from centre that make point d and e

[@v.prasath3130]

Very nice vedios..Life saver

[@AMANKUMAR-un6pg]

How much distance take between reference line and circle upper arc

[@rohitaatneray]

What about sectional side view...?

[@Sarita.Bijwe21]

Sir... Agar if the position of AIP is not given and major Axis is given then what will be the pricedure

[@ManasPatnaikofficial]

+Lifelong Learner Thats Reverse sectioning.....that is.... True shape of section will be given and its corresponding cutting plane is to be located......

[@anilkumarsharma8901]

Koi bhi equations ka parametric form kaisey nikal saktey hain???

[@pranjalchouhan5658]

A cone, base 75 mm diameter and axis 80 mm long is resting on its base on the HP. It is cut by a section plane perpendicular to the VP, inclined at 45° to the HP and cutting the axis at a point 35 mm from the apex. Draw its front view, sectional top view, sectional side view, and true shape of the section.

[@SonamSingh-jn7nm]

Sir, I have query that if true shape of section of given in question instead of that is cutting angle with the hp or vp yo axis then how to draw its projection .please Sir reply .and put a video of this type of question from section of plane.

[@paramgoswami4456]

Why the some portion of true section view is not hatched i.e. Part near h

[@ManasPatnaikofficial]

Hi Param.... Answer: Because the section starts from A and ends at H in the Top view... Param watch the video again....I am sure you will observe it easily......All the best

[@paramgoswami4456]

Manas Patnaik yeah thank u sir it really helped.... Also very good videos helped me greatly in my final ed exam

[@ManasPatnaikofficial]

+Param Goswami You are welcome Param.....

[@ashvineepawar1777]

Question. = How to section in solid boll ?

[@prudhvicreations2241]

very nice drawing easy to understand

[@atanughosh1188]

Thanks Sir for big big help full video

[@saedy9979]

Thanks bro, but why you didn't put and it's side view

[@ManasPatnaikofficial]

Well Saedy...i am gonna be making a refreshed version of this video very soon..........Dont worry.........

[@bansodeharshavardhan3618]

Sir add video about sectioning of sphere please

[@muhammedshihas9480]

Thnk u brw..from kerala..

[@ManasPatnaikofficial]

Engineering Drawing | Engineering Graphics |: kzbin.info/aero/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS

[@debjitghosh2816]

Please, draw the sectional side view with the video.

[@architjain811]

Shouldn't the true shape be an ellipse?

[@anilkumarsharma8901]

Koi conical section kitna degree par jhuka hain yeh kaisey pata chalta hain?

[@harithadhamothara6175]

upload some videos regarding perspective view sir

[@ManasPatnaikofficial]

sure Haritha I will take this suggestion in my upcoming videos....

[@ramakrishnanmayakrishnan6533]

Hii sir can we take 12 equal parts of the circle

[@VKR07888]

Sir ,if the max length to measure in scales is in fraction then how to solve . Plzz make a video on this 🙏🙏🙏🙏🙏🙏🙏

[@nitinraj4973]

Thanks so much bro...keep it up.

[@faisukhan1357]

Ye jo aap use kar rahe he means me pc me use karte he vo software konsa he plsss reply

[@Rajat-Sharma1]

Its an older version of AUTOCAD. You can download the latest version of AUTOCAD from the official website for free

[@a.ktechgaming9915]

Sir please make video on section of solids parabola problem and cube problem

[@prajuprajwalanurathna8387]

Superb sir

[@stuntridervlogs8251]

hats off to you........ keep it up.....

[@ManasPatnaikofficial]

Hi Siyaram...... I am sure my videos are helping you learn..... Keep watching and do share this with your friends also... All the best......

[@amitajoshi6429]

In the top view e and d should be there instead of e' and d' respectively.

[@beautykumari291]

Thank you so much sir

[@jeeva8158]

Pls pentagonal pyramid section of solid sum sir

[@jaunviljoen6988]

What program do you use

[@ManasPatnaikofficial]

Well, thats AutoCAD

[@mechanicalguruji1237]

please uplode video of section of pentagonal pyramid any difficult problem

[@ManasPatnaikofficial]

sure man... I promise that i will implement your suggestion...... All the very best...

[@shubhamprajapatii]

Where is sectional side view sir

[@abhirammadhu2973]

Don't we need to draw the side view here? Why?

[@ManasPatnaikofficial]

You can draw it...Go ahead

[@sudhamahajan2272]

@@ManasPatnaikofficial will we do at 45 degree again for section side view ..

[@gokulnathan4380]

very very thank you sir

[@PavanKumar-cy2wq]

Sir you dint explained how to draw a sectional side view in this problem

[@ManasPatnaikofficial]

I believe that u can work that out....

[@aqibnabi4681]

Thank You sir

[@tukadiyadharmesh4859]

thank you

[@shifasheereen2063]

Sir how to draw the side view plzzzzz male video sir