MANDIBLE MOLLE STRAPS - Upgrade your Gun Belt

[@AT-sf3wq]

“A beginners guide to sewing” on the second monitor got me good 🤣 At some point Travis and the team are going to reinvent the wheel! Another awesome bit of kit look forward to them arriving over here in the UK

[@shavintra]

I dig how Haley always makes things better over time.Give him awhile and he improves on kit,gear,and training to take it to a different level of performance.Hadn't delt with one wrap or velcro but heard people uusing it.Once i saw it immediately thought way too flimsy to trust attaching something with it.Thanks again Sir for making another improvement from thinking outside the box.

[@HappyCamperLife]

Just a few days ago got in a scuffle during a detain and one side of my angled esstac (one wrap presewn to pouch) came loose leaving it only held on by one strap. One wrap is cool, but I’m glad it’s weakness is being recognized

[@gregtellez6]

Had one of mine rip the molle webbing off an esstac and the other rip in half completely. Won’t ever trust one wrap again for serious application.

[@HappyCamperLife]

@@gregtellez6 Agreed I immediately ordered a new solution. It didn’t sit well with me the rest of the shift. As much as I loved the esstac angled pouch I don’t believe they make one without it presewn. Glad I found like that instead of a more serious incident

[@bloodhunger82]

Omg. I bought these immediately when this video dropped. Just put them on my belt and wow its a game changer

[@Just_Some_Dude1776]

I laughed at 2:30 when the other monitor said "A beginners Guide to sewing".

[@Marshall.Law.541]

Haley is always looking to improve gear that has to work and work correctly. Well done, Travis and crew!

[@derptothemaxclearly]

Wow those price points are outstanding! Thank you.

[@aarondbritt]

Great video, you were in your element. Simple, informative. Well done. Great product. Probably the best video I’ve seen you make. Say Hi to Britony for me, I’m Jonathan’s cousin, hope things are well!

[@practicepractice5719]

Great system........any ETA on the new D3 belt........you've been showing it forever.................

[@greeneyedghosts]

Is that the new D3 he's using in this video?

[@bubba5497]

Exactly what I was looking for with the angled piece. Was about to cut up some one wrap to do it myself.

[@craigrobertson6082]

Excellent concept. I can see these really helping out, especially when you are changing out loads for different missions sets.

[@Rubeless]

Your mission sets are the different indoor public ranges you visit three times a year

[@wtdconcepts]

Very cool to see innovation like this while still maintaining a great price point!

[@ProductOfMySurroundings]

So a fancy Velcro cable tie?

[@jayraymond9707]

My thoughts exactly.

[@ChadronMike]

I'll still end up buying lol

[@SmackedInATL]

That’ll be $80 please

[@Martell276]

Pretty much. Malice clips work just fine, are more durable than velcro and cost less than half the price of this product. It's almost like they created a problem to sell you a solution to a problem that didn't exist in the first place. But then that's the entire gun industry in a nutshell anyway.

[@kevin29709]

@@Martell276 malice clips are 2.50ea, 2 pack of mandibles is 3.50

[@Justwannabetactical]

I got a few of these for all of my pouches for my belt. Some pouches aren't compatible (spiritus JSTA, Crye smart pouch etc) and the only reason it didn't work with them was the ride height would have been completely off. Other then that, they have been amazing on my esstac and Haley smoke pouches. Also the blue force gear ifak now micro works with them. I did have to flip it upside down but thats not a problem.

[@unrestedtank4172]

I was rewatching the video you made (after seeing Dirty Civilian do it) on painting rifles and with the Magpul Bipod, if you have yet to notice, there is a knob on the center bottom of it (between the legs) and that is how to loosen/tighten depended on your preference.

[@ninjaboninjabanana]

Wouldn't mind a video over your "current" carbine, pistol, and gear setup.

[@Rubeless]

Simp

[@ninjaboninjabanana]

@@Rubeless Simpson

[@PatrickKniesler]

I know a good solution when I see a good solution. Neat.

[@donaldlerolland4449]

I’ve been thinking about getting some one strap. After seeing this I went a head and ordered some mandibles.

[@emanuelabell2212]

2:28 “A Beginner’s Guide to Sewing”…😂😂😂

[@True_Patriotx]

Dude! Wow I was just switching out some pouches on my belt today and I was thinking man this should be simpler. I am definitely buying some.

[@PhillyTac]

These are legit! Love them!

[@RprtBak]

A beginners guide to sewing. I love it lmao

[@Grudge69]

When will the left handed ones be available? Only see right handed on website

[@puckingfickles]

I was just thinking this morning that I need a way to secure better mag pouches to my belt I use for work.

[@joemo1033]

Nice! The more innovation, the better. Great stuff Travis.

[@4godandcountry663]

Molded Hook - a 100% nylon, ultra-light and ultra-thin low pile plastic hook that offers excellent shear strength. Works best with low profile loop. Our Molded Hook tape can be sewn or ultrasonically welded. Also available as a pressure sensitive peel and stick tape.

[@jasonfu2094]

I use 2” MOLLE “Battle Belts” with Esstac Kywi pouches and malice clips, very secure. To be fair to one wrap I have used it on a belt with no MOLLE, and once the outer belt velcro mates to the inner belt velcro, the mag pouches are *almost* as stable as MOLLE and Malice or MOLLE straps like Blue Alpha Gear makes. Showing how unstable one wrap is without being mated to the inner belt to stabilize it is kinda like an informercial making it seem like pouring pasta into a pasta strainer is an impossible task LULZ 😂.

[@bchang0999]

I love the idea and would use it for all my pouches on my belt but would I also lose the hook and loop for my inner belt?

[@jacobsnell6214]

My only question on this is related to longevity. I throw on a duty belt and bullet proof vest every day, sometimes for up to 16 hours a day and have to handle all types of weather. I invested in a duty belt 6 years ago and it has lasted me this long. I still have a lot of the same MOLLE pouches that I started with. If I put this on my belt, how often am I going to have to perform maintenance on it to make sure my pouches don't fall off in a fight or if I have to run a hundred yards under stress?

[@anorman051290]

Travis needs to do a video himself on the new D3 belt. Best to describe and inform of it and the why they've made it

[@Semperf11]

Useing Mille not bad just takes patience… cool product nun the less 🤙🏾 might have to add these to my hidden cart (married life) 😅

[@JulietTangoCustoms]

Im on the same page hahaha.

[@patrickm.blanchard8497]

I don’t know…. I’ve had the same one wrap on my gear for like 3 years and it’s still solid

[@JulietTangoCustoms]

It does stretch and move with humidity or if you get into a scuffle.

[@RAWEKAM]

Always a pleasure to watch you work! The innovation is second to NONE!

[@tlkseries1]

This seems fantastic

[@-RONNIE]

Thanks for the video & keep up the good work 👊🏻🇺🇸

[@ViktoriousDead]

“Why you should consume more product, that you perceive as effecting your bottom line” It’s DEFINITELY your gun belt holding you back folks, not the fact that you’re overweight, and don’t train

[@Rubeless]

We can tell by your selfie you are really serious

[@ViktoriousDead]

@@Rubeless struck a nerve huh

[@_considerations]

@@ViktoriousDead yes Dad you did 🤣love your videos bro

[@sectorseven07]

There are various anecdotes in the comments of guys having the system they were previously using fail on them, specific to belts. While I agree on the fitness thing (Ive lost 20 lbs the past 2 months and dropped 2 minutes off my mile time) there is clearly a niche that appreciates this innovation.

[@mattj.7756]

Taking your multi and chucking it at the pouch you’re trying to take off the belt is about as recurring of an action of mine as it gets.

[@xCrimsonxTidex]

HSP hast to be one of the most innovative gear makers I’ve ever seen. Keep up the good work Travis!

[@EODFish]

Certainly seems like a potential improvement over onewrap. I think comparing it to anything PALS related is a misnomer if not misleading. Hopefully the price makes it make sense.

[@comm-on-call]

Drinking game, take a drink everytime he says "Mandible". Hammered in no time.

[@huexley]

Cant be found yet in switzerland, but that some super clever design.

[@djreese1885]

Seems like a solid solution! Think I’ll try them out. God bless 🙏🏻🇺🇸

[@itsreallyhairy]

Awesome job.

[@Earth_Care_Cowboy]

I started with Zip ties on Alice gear, and one lopping my belt through Molle pouches. I guess I’m just not fast enough to ever notice the movement of my mag pouches.

[@MoonMoon-gu2ge]

my gunbelt cant be outdated, I dont have one.

[@2AToday]

This absolutely sounds like something Archer would say. Profile pic checks out!

[@imtherealjoeyd]

Travis where can we get the branded BCM magazines? I know where to get those ar mags but cannot find the branded ones…. Please help!

[@recon1986]

AXL has a great option for putting pouches on your belt/cummerbund with your pouches Mollie onto a velcro flap that goes around the belt/ cummerbund and you can switch everything out so easily.. check it out

[@tfwwhennofitlitgf3300]

If pouch movement bothers you, the solution is to use 1in instead of 3/4in Onewrap, not spend $5 on a single strip of hook and loop.

[@Masta_E]

Thank you! I saw him wiggle the pouch and thought something was up. My one wrap doesn't move at all and it's why I switched to one wrap to begin with lol.

[@WarrHoll]

Until you snag your pouch on a doorframe or while dismounting from a vehicle or horse and that onewrap snaps like an old rubber band. That's why I wrote off using onewrap a couple years ago; it's just not very strong material and I've lost an empty mag pouch and a multitool pouch with the tool still inside. Hopefully this is a little bit higher tensile strength material.

[@tfwwhennofitlitgf3300]

@@WarrHoll If that's a problem for you, then you want MALICE clips.

[@kmessiah1]

My duty belt is damn near held together by Amazon roll of hook in loop 😂 instead of buying $100+ piece of tegris and cordura

[@WarrHoll]

@@tfwwhennofitlitgf3300 not a good option for every application, although certainly better than onewrap. If this new HSP product works as advertised, and I'll certainly be trying it, then it's another tool in the toolbox. Cost is irrelevant if you're using your gear professionally and your life or your team's life depends on it.

[@PoliticallyInsensitive]

I most be more old school than i thought. Why would i want an "emergency" magazine angled backwards? Most likely my hands will be in front of me so I've got to bring my hand back, then change directions, grab the mag, pull rearward, then change directions again to bring it forward to the gun. Before this i just had to drop my hand then pull upward towards the gun. So much for economy of motion huh Travis?

[@Kealohi23]

Tek lok is still my go to for my belts. Zero movement and can angle, while also quickly interchangeable.

[@nukkohuits17]

First Spear did something similar, this looks like it works better than their pouches. Big Brain Products...

[@1391996]

My brother in Ra. Esstac did this years ago.

[@veovius]

So whats the difference between onewrap and Mandible?

[@Cobra-cy9mz]

HSGI universal clips work for my mag pouches. I'm worried about durability and retention when it comes to something soft like this.

[@trisrenaquino8794]

I was wondering how people got that 40 degree mag angle.

[@wordman9581]

What kind of life span can we expect out of the Mandable?

[@jayraymond9707]

About the same as a roll of hook and loop or cable tie from HD or Hobby Lobby

[@JulietTangoCustoms]

@@jayraymond9707 these will last longer than that material

[@jayraymond9707]

@@JulietTangoCustoms you’re also working directly with Travis. Have you used them? I’m interested to see if these are worth the price point

[@StephenShreds]

Man those ditch lights are freaking over kill.

[@JulietTangoCustoms]

That's my truck lol. Not out here in AZ when im off-roading in the dark. 5k each light and it pans to the side of the truck as well, they arent made anymore, but they work amazing

[@sheerwillsurvival2064]

Very nice. Iam old school but when I see something that is well thought out and designed I adapt.

[@Rubeless]

You still use 45 long colt revolver

[@sheerwillsurvival2064]

@@Rubeless lol no but I do use 44mag as my back up when elk hunting in grizzlies country

[@gillbrown8520]

Ordering now

[@TaterActual]

Every time I click the link frin the back in stock email for lefty mandibles, they are already sold out.

[@Ahmaurnamu]

Please update the side saddles so it can mount 3-4 columns instead of just 2.

[@steakwilliams4448]

This does look cool. I don't switch out my pouches often enough to want to move away from traditional molle straps. That canted one looks badass, but it wouldn't work on my belt

[@gansior4744]

so the one wrap, but HSP logo so costs like 30$ per strip?

[@PatrickHenry-y5h]

No conex box on this idea! Nice solution.

[@TheJbower76]

Travis was swinging that 320 around and it didnt go off by itself.....hmmmm.....its like all these lawsuits against SIG for an "unsafe" gun are frivolous.

[@2AToday]

What is the grip module on the p320? (In the holster attached to the belt that Travis is demonstrating with)

[@MechanizedGhost17]

It looks like the Brouwer M1811

[@2AToday]

@@MechanizedGhost17thank you

[@thomasseagull2093]

I need these, when do they go live?

[@xusmico187]

The #2 pouch elastic stretches Velcro for pouches, elastic on pouches, fail waiting to happen . Agree USGI straps work but damn. Hard. Breaking, screws, etc also just fail in waiting

[@MFCSteele]

"Do you hate molle?" Say no more, I'm in.

[@PuckChudkins]

It would be cool if you could keep the D3 in stock

[@danowolf]

what pistol is shooter drawing around 04:51

[@Rubeless]

Why? You gonna run and buy it to look cool

[@slappomatthew]

I have a plain 2 piece belt and use one wrap cut to fit with kywi. done deal the best there is. a belt is too thin to use molle.

[@cpow6207]

Cool product and the price looks right, but have people really run into problems with one wrap?

[@dodgersfnshepard8673]

Ill test the funk out these so tired of wiggle and not where it should be

[@vaughnburrows]

Why not sew the mag pouches on, then you dont have to worry about it coming off?

[@2amichaelj]

Didn't Defense Mechanisms do this already?

[@tylergarrett4498]

Yeah dudes have been using one wrap for a while now. I had hell getting the velcro straps through my double rifle mag pouches though haha

[@tylergarrett4498]

I've spoken too soon

[@2amichaelj]

@@tylergarrett4498 it's not one wrap. It's designed and looks exactly like these Haley straps even the 45 degree ones. I've been running them for 2 years.

[@tylergarrett4498]

@@2amichaelj I'll refer back to my second comment where I say I spoke too soon

[@squidog94]

“Remember, switching to your pistol is always faster then reloading”

[@beemer32394]

Disclaimer: I haven't watched the video. But I'm going to guess and say the reason is haley strategic is about to or has dropped a new gun belt.

[@VB6000.]

Need mandibles for plate carriers.

[@syntaxerrorsix3137]

Wait 'till you see my 30 year old LBE.....

[@xusmico187]

did he just put a used mag into the reload mag pouch?

[@HerbalistAce]

Idk. Sounds pretty expensive for some velcro. The best mounting systems are those you just slide in. Wish I knew the name for that system. Slide them into a tactical/molle belt/vest.

[@frankopanklaric]

What do I have to consume my money on now? Please tell me!

[@JOE901TN]

Monoprice would like a word with y'all

[@Rb889]

I can see some utility in the angled one, it's $5, so not god-awful. The straight ones are just straight up not worth it. A big-ass roll of 1" onewrap is cheaper, does the same thing, allows for more utility in how it's used, and doesn't have excess movement, though it's annoying to get it through laser-cut pals. If you've had issues with onewrap failing, well, here's your solution. For the rest of us, perfection is the enemy of good enough.

[@spartanpatriot3163]

$5 for a piece of Velcro. $5 for a bag of 100 zip ties. This issue was solved years ago.

[@borrago]

Right? Any musician has plenty of velcro strips.

[@recon1986]

I dunno man I refuse to pay over $100+ for a damn belt... I use a coyote brown condor LCS battle belt that cost me $35 and is extremely durible and reliable and doesnt break the bank.. it's insane spending that amount for a fucking belt I dont care if molle is on it or not 😅😂

[@meidamx]

Get some.

[@EdwinYee1]

2:31 Milton's stapler

[@Nanan00]

Now we just need a better mounting system for plate carriers and pouches.

[@SlimRhyno]

Great product with a name that's easy to remember (my memory isn't always the best these days)... what's not to like?! Man, this would've saved me a decade plus of fudging and rigging, but I hope you young bucks take advantage of this!

[@Jorigin]

Damn Travis starting to look old (no less of an ass kicker). But makes me realise how long ago those Magpul Dynamics videos were, god damn.

[@tsmithf33]

Great product. In cart ready to roll but 13 dollars shipping for 17 dollars worth of product that will ship in an envelope is an oversight that needs to be addressed

[@EliteElk221]

Holy hell this is insane innovation!

[@1manzpeople]

🙄

[@Masta_E]

Ok so if you use 1in onewrap you don't have that wiggle you showed. That was kinda deceiving to use one wrap thats to small lol. Anyways I would encourage yall to get one wrap for a fraction of the cost. Unless you want the angled mags, then get the haley curved one.

[@kevin29709]

That was 1” one wrap in the video

[@Masta_E]

@@kevin29709 then he purposely used it wrong, because my pouches don't wiggle at all, and it's why I swapped over to one wrap to begin with.

[@deno7482]

🔝🔝👌👍

[@zapman2100]

if you want to show these work send these to testers that we can trust on youtube, like Hop and Brass Facts, inRange, Warrior Poet, 3 of 7, and T-Rex Arms, if these guys can say its as advertised and your willing to let them test it to show it works, it would probably be worth the price. hope to see this tested by people trusted, while you are trusted its your product and needs 3rd party testing and evaluation.

[@stevegillespie6424]

Agree

[@zomie1111]

Because Travis is untrustworthy? It’s $3. Buy it yourself and test it. Throw it away if you disagree. Start thinking for yourself homie.

[@michaelr5606]

They’re a few bucks ffs. Test it yourself. We’re not talking about the “greatest new piece of kit that changes everything” for $3k. They’re cheaper than a fancy coffee drink.

[@KuraiShokubai]

Bro this is Travis Haley lmao he is the OG of this. He’s more trustworthy than literally everyone you just named and has been on the scene twice as long as anyone you named. Get with it.

[@keithkreatives]

Don’t knock the molle loks. That’s the best solution for those of us running molle vest carriers. This mandible gadget wouldn’t work

[@distilledfreedom1840]

t's a good thing he used an AR-15. It's such a small bullet and doesn't do a good job disrupting barriers like windshields etc. Thankfully he wasn't using a hunting rifle.

[@nahbrahhh]

Just use a zip tie