Will It Move. Seeing that Manitou bought back memories for me as back in the day I drove a Manitou MB 25P, Based on an International tractor with a Perkins engine and a Shuttle Gearbox. It was the one with the Sliding Counter Weight.
@jarnoreurink64286 ай бұрын
Wil it move
@nicolassales86796 ай бұрын
Definitely get it sorted, had one on the farm I worked on as a student. Even I couldn’t break it!
@bmacd21126 ай бұрын
Anything that fires off that easily, deserves a little love. Carry on smartly!
@vincentspratling3656 ай бұрын
Hi Mucker. I used to drive one when I was working in the scaffolding yard. Build like a tank
@rolnics6 ай бұрын
Will it move. What a gem, she wants to get moving for sure the way she started up like that!
@wildefox14786 ай бұрын
That old forklift fired right up, I'd like to see a will it move and operate video!
@patkelly79996 ай бұрын
Great job Kurt and Puppo, looking forward to the Will It Move, funky little machine, a handy yoke around any farm yard👌👍🙏😎
@Soggybudgie6 ай бұрын
Yes, full ''will it move?', please
@Andrew-wu2lq6 ай бұрын
Good work giving the old girl the kiss of life 😊
@niceone6blue6 ай бұрын
Will it move. Another excellent episode!
@comedyash6 ай бұрын
As a regular forklift operator this project has me fully fired up! This is some beast compared to what I'm used to running and will be great to see if you can find the parts and get it 'forking' once again, I reckon it will come right back around good luck.
@ryebob15683 ай бұрын
Mukka. Your videos are so funny. You must take ages editing, the comedy clips in. I'm in absolute stitches, laid here convalescing. Your no nonsense approach, is absolutely perfect. Get her driving pal. She will move ! I'll bet you £100.
@LaLaLand.Germany6 ай бұрын
Yes, please do a tlc vid on this. And I am absolute on board with how and why You do what. If this is cheap, get it, find the fault(why it´s parked) and use it. Seems like a good purchase. And by the length of this it was clear to me that it would light up proper. I liked it anyway.
@adamdnewman6 ай бұрын
It's a gem
@austinhenry76266 ай бұрын
Please! Dont leave us hangin Lord Muck. Carry on with this project! Thanks
@markdowling43306 ай бұрын
Will it move?👍
@whitesapphire58656 ай бұрын
Yes, let's see it all, warts n' all!! It's a lot better than bobbing in and out, and trying to figure out where we are in the project! 🙋👍
@prestonvaughn20785 ай бұрын
Will it move. Got here from seeing you visiting Dirt Perfect and thought I'd give you a try. Good content, thanks for bringing us along for the ride.
@Machines.In.Action6 ай бұрын
Great content! I appreciate the detailed explanation of the engine and gearbox. These old machines are real workhorses. 💪
@KevinHeadlam-Tasmania6 ай бұрын
Do the move Mate
@williamstewart2766 ай бұрын
I've got one and runs like a dream- we bought it 1985 and it was a year old then . Built around a Ford 4000 - I put new brakes in it a few years ago and there Ford 4000 brakes. I found out the Manitou dealer had a new central mast for it - he sold it to me cheap ( who else would buy it) . It would great to see it running.
@LordMuck6 ай бұрын
They're built around a 4610 rather than a 4000 but roughly the same 👍
@Richy9966 ай бұрын
Will it move. Do the lot. Really enjoy your videos keep up the good work.
@oedsnicolai49896 ай бұрын
Get it moving and working please Kurt. Used to run around on Manitou's a lot building large tents for feast and fairs 🎉
@thomasmacpherson52366 ай бұрын
Move it move it move it lord muck
@geoffreygomme25766 ай бұрын
Every step until its complete . Great channel, Great content ,thanks
@jonwright73946 ай бұрын
Will it move.... YES YES
@timdavies96276 ай бұрын
I used to drive one of these on the first farm I worked on which was over 20 years ago. It was brilliant, very reliable. It must have been bigger than this one you've got there, though, as it had a sliding weight over the engine. We had a 2 ton grain bucket for it and using it to clean out the cow shed every spring was fun, pulling wheelies ripping out bucketfuls. 😁 I'd be interested to see if you can get yours to move. Driving it in top gear down the road was scary cos the steering was super sensitive and so made it oh so easy to tip over. Not that I ever did, lol. But I often broke walls with it. 🥴🤣
@Trayte846 ай бұрын
Will it move 👍🏼
@tonysargent77876 ай бұрын
Love watching these will it start videos definitely will it move Another great video has always lord muck 👍
@colinquinn31656 ай бұрын
will it move
@davidkenneth4996 ай бұрын
a big fat Yes, let's see it up and working again Mucker. 🚜
@robertmoffat9716 ай бұрын
Will it move
@edwardwegener40186 ай бұрын
will it move great video love to see working again
@ewanstewart80115 ай бұрын
Will it move!!!
@robleary33536 ай бұрын
Bril!. Love seeing old bits of kit being given another go, with a lesson in old school mechanics thrown in!. Bril, Nuff said!. 🙂
@nigelbeiley66686 ай бұрын
Really good on the history, thank u,I’m a novice on tractors and the likes so it’s good to know about them a bit more. Defo on the will it move❤😊
@thedaddy19456 ай бұрын
Will it move? Richard from NW Mississippi. Saw you on Dirt Perfect and Diesle Creek
@Recoils-electronics-repairs6 ай бұрын
First forfklift i repaired was a manitou that was some 30 years ago nice to see one with all the cab on it. Be nice to see it back in service doing its thing
@simonunwin82046 ай бұрын
Get it fully working
@vincentwalker71346 ай бұрын
Well i thought it would start easily enough with its international heritage but to find an old Ford in there was quite a shock. They were good old fork lifts them mucka so you must progress...👍
@MJBrennan-k9d6 ай бұрын
keep it going man keep another old one golng happy fathers day from ireland. matt
@Patrick-bp9if6 ай бұрын
will it move ?
@markshort40236 ай бұрын
Get it moving fella. Great job on the editing love the clips must take some amount of time to complete keep them coming
@alfadoofus6 ай бұрын
Will it move more ?
@bobuncle87046 ай бұрын
Great will it start. Now the will it move. 👍👍 Just love all the movie references.
@EdFrankes6 ай бұрын
Will it move??
@paul81882 ай бұрын
Hi Mucker ,I remember these from when I was an apprentice about forty five years ago ,pretty good machine for their day though I’m lucky to be alive from an experience I had with one (perhaps I may tell you on another day)😮
@jamesline89646 ай бұрын
Will it move fix her up and put her back to work!!
@iceman95496 ай бұрын
Yes!! Let’s see this project go forward. 👍👍👍🇺🇸🇺🇸🇺🇸
@davidlatham96753 ай бұрын
We had a number of the four wheel drive version on the fleet at Plant and Tools in Tunbridge Wells back in the eighties. From memory, they were a solid piece of kit. Remember doing a clutch on one. Again, from memory, we had issues with the drag link to the yolk that steered the rear wheels was proned to shearing the bolts that joined the two. A bit of a poor design which we had to result to the arc welder!
@GarethPierce696 ай бұрын
Yep, let’s see it move please Mucker! It gives us amateurs the confidence to give things a go!
@peterfarbrace36046 ай бұрын
Crackin little machine. Lets see it moving and get her back up to operational spec 👌 Great vid as always
@anthonyshaw72514 ай бұрын
Go for it, you’ve just sent me back to the 80s as a kid, splitting the frame/chassis to change the clutch with Perkins engine for my father at plant hire firm. ps subscribed 👌🙏
@stephenkelly20676 ай бұрын
Had one those manitou about 30 years ago was amazing machine in day
@robmorgan58766 ай бұрын
A brilliant machine. We had the ih version. Great for going in old buildings we had on the farm. Was a wonderful, simply machine to use and easy to work on. Cheers hope you are able to get it going.
@briangarden69766 ай бұрын
would love to see project manitou , if you take measurements off the mast channel and carridge you should be able to get bearings ordered ,did that with a old climax.
@whitestream52336 ай бұрын
Excellent video and you got it running ,so another one saved . Looking forward to the next one "will it move" I think it will turn out to be a good machine . All the best Mucker.
@Madjock566 ай бұрын
Defo just like ur mucker diesal creek love the two shows 😊
@stuartrance2776 ай бұрын
Got to start with , will it move before I forget, Great video to watch , such a sweet, crisp engine , did a bit of work with one of these forklifts years back & I really liked it , seemed a good tool & very strong on the lift capabilities. The one I used had no torque converter, just selected one of 3 gears & a reverse gear if I remember correctly 👍😊Had a good turning circle too. Thanks for the video 😊👍👍👍👍👍
@danchivers8446 ай бұрын
Will it Move 👍your a star keep sending us more videos of the manitou.
@johnwood3466 ай бұрын
Never got to use a mani as we had a Coventry climax and a sanderson As main yard trucks a rear mounted mast fitted to an old 135 fergi was the main field used unit
@mikeduin83116 ай бұрын
Nothing Tommy, it's tip top....😂 Cracking runner M'lod, even without a birdsnest... A will it move for me please! Great video as always! Cheers, Mike
@benrichards73976 ай бұрын
Oh yeah will it move can remember using one of these to load grain when a young lad on the farm great machine
@mikebrunner15776 ай бұрын
I would love to see you go through that forklift.
@farmerfuller876 ай бұрын
I’ve lost my mate to discuss your videos with now he spoke so highly of you rip zach. Them old rough terrain counterbalance forklift was all we had before the Sanderson teleporter come along revolution the job.
@LordMuck6 ай бұрын
I'm still at a loss as to know what to think or do. To be honest both Nick and I agreed there is nothing we can do but it's still so unreal. I don't know.
@farmerfuller876 ай бұрын
@@LordMuck your not the only one mucker I just wish things was different.
@stuarttyson7866 ай бұрын
Love to see you get this going properly. We had a 4wd version in 1977 but the Internash 45HP engine. Used to build a new farmhouse, lifting stone for the facing up to the third storey. Kept it around the farm for a while afterwards but when we tried it with a buckrake at silage time it didn’t have power to move on the pit and had to be dragged off. Traded it off at Dobsons in 1980 for an MF 565. Believe it went down to Dorset.
@leontrainsandquattros2756 ай бұрын
will it move. love it .dont let it die. thank Leon
@jorgefernandez-mv8hu6 ай бұрын
Of course let's get the Manitou back in business. They are always useful.
@ginggur175 ай бұрын
Go for it Podge, get her working. 👍👍🇬🇧
@nigelbaines66046 ай бұрын
I have a 1985 mb26, built on a 4 cyl Ford skid. 6610 I think. Works every day in my workshop. I changed the mast bearings about 3 years ago. They were available but expensive. I also have a bt420 which is currently being recommissioned. In the past I have also owned an mb25 international with perkins 4236, not the nicest to operate as it was really heavy and there wasn't a neutral on the shuttle. I have also owned a sanderson sb55 built on a 3 cyl Ford skid.
@daviddavies15966 ай бұрын
Yes, more Manitou please. What is the third hydraulic valve for? There's no handle fitted to it. I noticed there is a hose reel on the mast, possibly side shift was fitted at one time? I bet you have far more trouble moving the Range Rover out of the way!🤣🤣
@LordMuck6 ай бұрын
It's literally that - a third service for a toe-tip bucket or grab etc.
@gmartin82406 ай бұрын
Do a will it move Mucker , the engine sounds sweet . Well done Mucker🔧🚜🚜
@Dengezik1006 ай бұрын
Will it move?! Yess, I want to see project Manitou!
@paddymcfadden20356 ай бұрын
Drove them on the building sites great forklift still a lot work left in that one yet with a bit of tlc 👍
@paulknights36976 ай бұрын
It would be great to see if it could do a working day again. It was great to hear it start after standing abandoned
@bobolover16 ай бұрын
Nice one Muck . I remember these on the first building site I worked on in 1987 😮 TVH Group based in Belgium but UK depot and worldwide do an amazing range of spares for so many different makes and types of lifting equipment and plant .
@bobpaterson18456 ай бұрын
Will it move 🤔 not knowing who owns it that manitou would be a real useful bit of kit around anyone's farm if it could be put to rights for the right money 💪💪👌 great video 👍
@johnd72886 ай бұрын
We had a international forklift years ago and it had glow plug that went red on the dase it was not a bad machine ! Great video again Lord muck !
@billarcher6 ай бұрын
It< worth spending some money on it. They are a very useful machine especially in a workshop or in a machinery salvage situation.
@mjvandermeijden6 ай бұрын
Yes please! Show us how it runs and further repairs😁.
@gordon74706 ай бұрын
Yes, let’s see what it can do. Of course you can get it to move. You’re a wizard 👏👏👏
@LordMuck6 ай бұрын
A wizards sleeve...
@gordon74706 ай бұрын
@@LordMuck 😂😂😂😂😂😢
@donc816 ай бұрын
Absolutely show how the old forklift comes out! Great video sir
@martinwhite78766 ай бұрын
Always enjoy your videos mucker. Love to see this restored
@ronniecumming76856 ай бұрын
Will it move. Great video Mucker, Keep them coming.
@hellohello31996 ай бұрын
Perfect in a yard moving bales about, no need for a 100k John Deere to feed the animals, it’s still got many years left in it even if you spend £800, don’t even need the door on it
@joefarrell50196 ай бұрын
yes get it to move i enjoy looking at you working on these machine
@spankydavies6 ай бұрын
Will it move I would love to see the old girl driving around and shifting some loads. Do well, mucka 😊
@orsoncarte85363 ай бұрын
Keep going with it, can't let it rust away
@chrislovejoy82496 ай бұрын
Good video Mucker farm I worked on had one the 80s traded it in for Sanderson 👍🚜😊
@AndrewHCann6 ай бұрын
Excellent video Lord Muck :) yes Like See Move to watch and nice find too on Fork Lift tractor to ! Nice see those on KZbin videos always so cool and seen lots them in person too!
@neilcotten28166 ай бұрын
Got to see it through, it’s too good to just sit there 👍🏻
@DOCTORDROTT6 ай бұрын
Worked on them a lot in my days on plant IH tractor based. I last worked on one in 1981
@kevinwillis91266 ай бұрын
Thanks Kurt great vid... Take care sir...
@LordMuck6 ай бұрын
Cheers Kev
@MrBusdriver636 ай бұрын
Wil lit move . Yes I would like to see project Manitou. They are are very good fork lift, Mucka. In Australia I have only seen Perkins engine, in the Manitou's, which were a good engine.
@wilcleno18666 ай бұрын
Good luck with it. Watching from the USA
@edgarwylie80236 ай бұрын
Yes it will be good to see if you can get the parts of the shelf
@fenlandrob62036 ай бұрын
Will it move! I bet you will give it a damm good go Mucker! We had one of those pre telehandler days and it did everything. Fenland Rob
@fredblogs33036 ай бұрын
Will it move…. I would love one of these what a lovely piece of kit
@jonkeighley26176 ай бұрын
Brilliant video love these. Definitely let’s see a will it move.