That's quite a neat tester you demonstrated for us. Appreciate the patience you used to demonstrate this for us. Thanks!
@martinbuilt3 жыл бұрын
Glad you liked it.🙂
@gordongman34234 жыл бұрын
Enjoyed. Do an injector test for 4.0 IL6... what might be preferable under load test.
@OverlandVideos3 жыл бұрын
i agree would like to see a 4.0 i6 injector comparison!
@neodiy2 жыл бұрын
Yes i would like to know why the old honda city fuel economy is much better with its 6 hole fuel injector...what could be the secret behind it.
@isisdixon7192 жыл бұрын
@@OverlandVideos iou
@ekbanjosworld49262 жыл бұрын
Yeah, the 703 X four holes vs OEM two hole and other 12 hole injectors.
@ovalwingnut Жыл бұрын
"We all got a new Fi tester".. thanks! :O) I have no doubt you R the "Injector Whisperer" now (3 years later:). Some really good info in your videos. I like the way your gray matter operates.
@Engineerboy1002 жыл бұрын
Great job on the video, I just ordered the 4 port version and I love it. Thanks for posting, I will be posting some videos using this awesome tool as well soon. But in the mean time you really helped me understand better what I was looking for and I just purchased a set of fuel injectors that I hope help my car run better and have better fuel economy.
@burntchickennugget1914 жыл бұрын
More people like you should exist. This explains why my car was runnin funky after my friend put some "new" injectors.
@martinbuilt4 жыл бұрын
Thank you, I appreciate that
@victorsilgado19504 жыл бұрын
Saludos desde España Martín!! Gracias por lo que haces, es muy útil para los que tenemos un WJ 4.7. Animo y sigue así 👍
@Lcthekiller4 жыл бұрын
Otro como yo , has probado los denso ?
@DANEMSPRINGER4 жыл бұрын
Another great video sir!!!! So happy I followed your original advice and went with those 12 hole injectors! Thank you!!!
@martinbuilt4 жыл бұрын
You are very welcome! Hows the 4.7 running with all the mods you have done?
@TGBoleyn3 жыл бұрын
Is it possible to use those Denso injectors on other applications than 4.7L, like a Ford 3.5L Fusion Sport? Or are they built with a particular rating in mind? Sorry, I don't yet know much about injectors, but I'm doing my research. Great video, I've subscribed and look forward to learning more!
@stoichiometry1474 жыл бұрын
Green Bands are in the 2004-2007. All my 2004 4.7's had/have them.
@niceguy1923 жыл бұрын
mein...you guys in the states have all the fun! I have never seen a test like this done before.
@martinbuilt3 жыл бұрын
Glad you like it, maybe some day you'll have to visit.
@jamesbooth86784 жыл бұрын
Maybe test all the different injectors for the 4.0 and the 24lb Ford injectors for the strokers
@jeepgarage2 жыл бұрын
Hi Martin, I've been playing with few injectors from my jeeps and around th same test bench and something strange happened,,let me tell you, I bought a set 24lb Ford Racing injectors for my Renix with no cat French export version, before installing them, I bench tested both type, the Yellow 4 ports BOSCH 0280155746 19.9lb Vs New 24lb. and then....what ever were the test, idle, speed test, hi flow etc, each time the bosh were spraying more fuel. I said to my self, it can't be, so I installed them and as I run open loop in stock form and as I dont have fuel trim but an after market wide band lambda, I can check my AFR and of course, my lambda dropped from 1 to 0.9 So in the test bench, they look to flow less but more when mounted on the engine. Few days after, I came back to the test bench....why is that....I started to make test again, same result, then I look to machine parameters, I found that pulse width can't be adjusted on all tests, why is that, during hi flow test or other it's like pulse is way too short compare to real pulse width ( 5 to 20msec from idle to full load on E85 on a 5.9 for exemple ) Only on idle test I have been able to crank PW from 3 to 20ms, and than as soon as I start to increase PW, the for Ford racing start to deliver more fuel than the Bosch. What do you think ? what was your pulse width during test ? have you been relying on the bench test pulse width ?
@mlubnani4 жыл бұрын
Genial!!!!!!!!!algo que esperaba ver hace mucho tiempo!!! Muchas gracias!!!!
@brackoncorbridge19664 жыл бұрын
Would love to see dirty to clean injectors and what cleaners were used.
@martinbuilt4 жыл бұрын
Great suggestion!
@juliomaciel7504 жыл бұрын
Martin! Still waiting on a walk around your grand Cherokee! It’s a sweet ride!
@martinbuilt4 жыл бұрын
Working on it
@ryanchenier-poulin85704 жыл бұрын
Do the imfamous 12 hole ford. Vs the 4 hole
@mikemelina73954 жыл бұрын
Great video. The machine removes all the variables and with a direct comparison, it was easy to see the performance of the individual parts.
@martinbuilt4 жыл бұрын
exactly, that's what I love about this Tester
@siahmonkey104 жыл бұрын
This was eye opening! Thanks for the info, I'll be picking up denso to replace my green banded cracked injectors.
@martinbuilt4 жыл бұрын
Yeah you'll like them, another good choice would be the Bosch 280156161
@gregj.gotham44023 жыл бұрын
I picked up a set at the junk yard Denzo 12582704 12 holes at 6.00 each 1.00 core. Cleaned them out. new is 490.00 for 8 of em. Go to a junk yard you won’t regret it.
@BJL2142 Жыл бұрын
awesome video man, im looking at upgrading my injectors and ecu(haltech) on my m271 c200k and have been scouring the internet but no one likes to talk about efficacy its all about flow numbers, i want the best performance not just the peak performance and if the better injector improves torque throughout the entire rpm range and not just peak then so be it, motors are just heat engines and extracting more heat into work is the aim of the game.
@martinbuilt Жыл бұрын
Thank you. I really do appreciate that i'm glad you liked it and found it helpful.
@chomot112 жыл бұрын
What would be a Denso equivalent for a 4L5Z-9F593-A from a 2002 Ford Ranger with the 3.0 V6?
@Off-RoadAdventureWJ9 ай бұрын
Hi, have you measured how much the fuel economy improved after changing the injectors?
@ekbanjosworld49262 жыл бұрын
Was wondering if you could adjust the pressure of each injector to test at the specific pressure of the fuel pump in different vehicles or even if it mattered ? Fun stuff !
@martinbuilt2 жыл бұрын
I am able to adjust the fuel pressure but not individually. I usually try to run them at 3 bar or 43.5 PSI. That way, you're always comparing apples to apples. Thank you for watching. 🙂
@benfischer6554 жыл бұрын
Can you run a rest on 4.0 injectors vw injectors etc. I see lots of opinions but you now have a way you prove it. I actually run a 4.6 stroker but not sure if my 93 electronics would run any of the injectors you tested.
@martinbuilt4 жыл бұрын
yeah can that, I'm running the Bosch 280156161 in my 98 Cherokee XJ with the 4.0 and those work great.
@stevelewis72254 жыл бұрын
Another Great Video on 4.7s. Would be delighted to see a series on building your HO engine. I have a 04 HO with 197K miles that is due for a rebuild. There are KZbin videos on the rebuilding , but your KZbin videos are fair more detailed and superior.
@martinbuilt4 жыл бұрын
Will do!
@geezee15793 жыл бұрын
Very informative. Want to change the Injectors on my 2006 Dodge Ram 1500 TRX4 with a 4.7L V8 as the engine seems to be under powered and a dog like the Chevy 305cc of the 1980's. Will the Denso Injectors significantly boost the HP and performance? Also got an K&N Air Intake on the Truck. It also has a 390 Rear End. Can I also buy Denso Injectors new online? Do any modifications have to be made when one uses the Denso Injectors? Are there any other Mods that you can suggest that will enhance the performance? I also have a 2006 Jeep Unlimited Rubicon with a 4.0L I would like to change the injectors on as well. Both Vehicles have a 6 Speed Manual Transmission.
@martinbuilt3 жыл бұрын
I like the 08-13 intake manifold with a larger throttle body. Also a free-flow exhaust system. I would recommend these injectors be used on a modified engine.
@constructiontech19704 жыл бұрын
Very cool test Martin!
@jimhailmann35439 ай бұрын
I would like to see some China gm injectors against some used oem gm injectors. Thanks
@leraarmetsnor77706 ай бұрын
Martin, I drive a Buick park avenue with a GM 3800 model 2 ultra engine. I do that in the Netherlands in Europe. In the USA that is a car for grannies but in Holland it is a real car from the USA and therefore really nice. In your opinion, what is the best injector (make and model) for the best performance and fuelmilege?
@1Arcticwolf Жыл бұрын
Thanks for sharing. Have you compared Bosch 23bls 4 port MDH-94-855 injectors?
@tjl88848 ай бұрын
Why don't they make ultrasonic fuel injectors? Just straight mist it into the chamber? Wouldn't that provide a more efficient or total burn?
@lmoh89156 ай бұрын
Cool vid and Cool test, could you test the Carquest Injector?
@geezee15793 жыл бұрын
Other than the Larger Air intake and the 08-13 Intake Manifold you would not recommend the Denso injectors for my vehicle? I am not sure what a Free Flow exhaust is.What other modifications are you suggesting? No one really makes aftermarket High performance parts for this engine, that I know of. I like my wired Intake and do not want to go to a fly by wire. I like Simple. If I was to put the Denso Injectors on without mods, you are saying that I would have problem with the vehicle.
@deltadetrix Жыл бұрын
those look like the slightly older style ev6 injectors does the new ev14 4 holes do any better? also marine boat injectors with the ball style would be cool to see!
@autotek7930 Жыл бұрын
Hey the link for the Denso injectors is still good on Amazon? I been eyeing them but the part numbers looked different than what you put on the screen
@antondontchev2165 Жыл бұрын
Hey Martin, I love your videos, I subscribed to your channel as soon as I bought my dodge. I just got bosch 0280158103 injectors with 12 hole and 259cc flow rate for my 07 Dodge Ram 1500 4.7. What is your opinion on those? Can you do a test on them? You can find them on the Mazda 2.3 L3 motors. Thanks in advance!
@johnjohns2333 Жыл бұрын
I have a ford 2011 Ranger with a 4.0L I’m not sure what stock injectors it uses but I’d really like to find a better preforming one if possible
@Kolonol14 жыл бұрын
Im glad you did this test...we were discussing this a while back... So what are the White Band injectors?
@martinbuilt4 жыл бұрын
I have seen those before, I'll get a set next time to Pick-a-Part
@Kolonol14 жыл бұрын
Awesome...id like to see because that was the original set in my 2000 dakota
@Devin_Schwartz4 жыл бұрын
The white-banded OEM fuel injectors for '99-'00 Jeeps and '00 Dakota/Durango's equipped with the 4.7L V8 are Mopar P/N 53030842. They are a two-hole injector rated for 22.5 lb./hr. of flow at 49 PSI stock fuel rail pressure. Many reported they underperformed and flowed closer to 19 lb./hr. at 49 PSI. It's possible that's why they were so quickly discontinued in favor of the red-banded Mopar P/N 53032145AA injector starting in 2001.
@Kolonol14 жыл бұрын
@@Devin_Schwartz gotcha...so even more reason for Martin to test them :)
@Devin_Schwartz4 жыл бұрын
@@Kolonol1 - Precisely! I would love a test comparing the white, red, and green-banded OEM Mopar fuel injectors head to head.
@richtyler13533 жыл бұрын
Very cool. Would like to know what you think would be the best upgrade injector for my 98 Cherokee xj. 4.0L
@torque2584 жыл бұрын
Would like to see 4.0 vs the popular Neon injector 'mod'?
@bobcrabb2310 Жыл бұрын
Hi Martin great video very informative ! I have a 2005 Honda CRV with a 2.4 engine it has over 204k and I need to replace the injectors, as far as I know they are the original injectors. Do you think its worth me replacing the filter baskets and cleaning them ? If not what injector would you recommend Thank you in advance
@nftshiller8485 Жыл бұрын
2001 DODGE DAKOTA 4.7 WHAT INJECTOR DO I WANT FOR GOOD MILAGE AND SOME TOWING? THANK YOU
@LifeInElSalvador2 жыл бұрын
Thanks for that very interested video. I am trying to upgrade my 91 Festiva / Kia Pride injectors to something more modern and efficient.
@martinbuilt2 жыл бұрын
I'm glad you found it helpful 👍
@whlawson5812 Жыл бұрын
Hello, can you suggest what is the best brand of gasoline injector cleaner for dosing annually into fuel tank?. Or your experinces or testing says that injector cleaners does not work!. Fuel dilution in engine oil originates from poor injector spray?. Thanks.
@ionhunter Жыл бұрын
My 05 Dakota 4.7 (N) 53032704AB are splitting top to bottom. So, I'm looking to replace them, suggestions?
@deonarinesukhoo99174 жыл бұрын
What fluid do you use in your machine?
@joeydelmarsjr.64611 ай бұрын
i got a question if I have oem injector 1pin hole @ 243.8cc p/m and swap for 4pin hole 232.1cc p/m, will the 4pin hole spray more fuel than the single pin hole? can the 5.9L magnum benefit from 4pinhole vs the oem 1pin hole?
@redwiigs8328 Жыл бұрын
Hi martin nice comparison. Is the AcDelco GM Original injector 217-2907 and the same injector as the Denso 12582704 these for a wj 99-04 Thank you in advance for your answer
@Ojb_19594 ай бұрын
I read that 12 hole injectors cause shifting to be smoother. How does it affect shifting?
@martinbuilt4 ай бұрын
I don't know how an injector would cause the transmission to shift smoother, did not notice anything like that, better throttle response and a smoother idle I did have.
@منوعاتابوعلوة2 жыл бұрын
What is the injector that filters the gmc Sierra 2006 4.8 . machine? fuel economy
@davespent90844 жыл бұрын
Hey great video good info maybe a better up close camera shot of the spray pattern and would love to see some chevy ls injectors new vs old and e85 thanks
@suquu9153 Жыл бұрын
I have a 5.7 L Hemi and I was just wondering what injectors would give me the best fuel mileage 42lb or the 95lb?
@richwilson70174 жыл бұрын
Cool test. Listening to see if one is louder? My new denso 12 holes tick.
@Ray000694 жыл бұрын
Awesome video!! Thanks for taking the time and showing us mechanic heads what fuel injectors are the best for the 4.7l
@martinbuilt4 жыл бұрын
Glad to help
@desertheatkicksgee2 жыл бұрын
Hello, I have a 2000 camry 2.2l with high postive long term fuel trim at 20% at idle, but at higher rpm it drops to 5%, but I cannot find a leak, would a exhaust manifold or intake manifold leak would cuase this? I also have do NOT have check engine light on.
@josegonzalez36504 жыл бұрын
great video thanks martin
@martinbuilt4 жыл бұрын
Glad you enjoyed it
@DemetrisJeep4 жыл бұрын
so what is the best injectors for 1995 YJ 4.0L ? for direct replacement ?
@martinbuilt4 жыл бұрын
I would recommend the Bosch 280155703
@matthewpetersen44172 жыл бұрын
simple question I already know but need confirmation, do most injectors fit size wise, I need to replace a few and Im just going to do all 6. I want to put those densos on my charger which I think stock poundage is 24lb injectors. They are 4 hole as is.
@martinbuilt2 жыл бұрын
Yeah there are many that interchange no matter what the brand is but there are some out there that are either much shorter or somewhat shorter than the typical Bosch or Denso injector. Like the injectors found on the 2008 through 13 4.7 are shorter.
@sirtnfol84763 жыл бұрын
cool. hope to see lots more comparisons
@martinbuilt3 жыл бұрын
More to come!
@richardwallinger1683 Жыл бұрын
excellent video .. nice kit .
@autotek7930 Жыл бұрын
Anybody have experience with the Bosch 12 hole 24lb injectors? I got the s&j stroker on the way And wanna get the rest of my parts here
@gregj.gotham44023 жыл бұрын
I have replaced mine to the denzo and a code 0174 bank 2 lean 02 sensor. To many things to list as to why. Intake manifold leak, dirty 02 sensor, vac leak. Runs great just the code so I’m thinking it’s the 02 sensor.
@martinbuilt3 жыл бұрын
Did the code show up after you replace the injectors and then if so I would suspect there's something wrong with one or more of the injectors.
@gregj.gotham44023 жыл бұрын
I did clean injectors and put them in the rebuild before starting it up. Yes I’ll agree it could use another cleaning on injectors. I’ll get screen change tool with new screen then rebuild em all.
@whataheadache...87534 жыл бұрын
Hey Martin you have some great detailed videos! Some injectors i would love to see compared are the oem injectors form 02-06 tahoe/suburban the flex fuel injector vs non flex and the way the perform with there different pressures (flex trucks 48-52 non flex 55-62)
@Den-tx1ml4 жыл бұрын
In the description for Denso 12582704 - wrong link for AC Delco injectors. Is it the same as AC Delco 217-2907?
@martinbuilt4 жыл бұрын
I couldn't find any spec. on those but, they look very similar.
@garrykellogg32152 ай бұрын
Did you have to change the fuel regulator? If you did, what brand did you use, and why?
@martinbuilt2 ай бұрын
No I've never had to change the fuel pressure regulator. I'm sure most fuel injectors will operate just fine with your OEM pump and regulator.
@garrykellogg32152 ай бұрын
@@martinbuilt Good to know. As soon as I can afford some, I'm going to find some Denso ones for my Toyota, and if I can't find any of those, I'll pull some ecoTech type from a Prius or similar.
@NoSleepRacing4 жыл бұрын
Is it the the audio in the recording or was the injector pulse cutting out on the machine?
@martinbuilt4 жыл бұрын
it's the audio, the machine runs perfectly.
@daveh25573 жыл бұрын
Any updates on the injector bench tester? Long term review of the machine? Would you buy the same one again or look elsewhere? Thanks!
@martinbuilt3 жыл бұрын
I still like this machine the only issue I've had is with the ultrasonic cleaner it is not thermostatically controlled or have a timer so do not leave it unattended. Like I did and after being on for several hours it burned up, not literally. I ended up purchasing a larger ultrasonic cleaner that had a timer with temperature control.
@richtyler13532 жыл бұрын
Also do you sell the injectors.
@anondusery12713 жыл бұрын
Martin, what is you opinion of your tester compared to other affordable ones? I was thinking of buying that model, or the Autool 150, 160, or 200. Thanks
@martinbuilt3 жыл бұрын
The one thing that the Autool testers have is a reverse flush I had to modify mine so it would do that. I also liked the fact that mine had a separate Ultrasonic bath At was not built into the machine.. Even though I burnt up my ultrasonic bath because there was no timer or heat control you you cannot leave it unattended. I replaced it with a another ultrasonic bath that was much larger. I have several of Autools equipment and I like their stuff I don't think you can go wrong with either one.
@anondusery12713 жыл бұрын
@@martinbuilt Thanks, how is the warranty and support on the Morphorn? Autool appears to have good "stated" warranty and support. I didn't find much on Mophorn related to that.
@jamesdewer2 жыл бұрын
That machine is sweet! How much to bench test my injectors? Are four hole better than two. I'm rebuilding my top end and I got to tell you those Chrysler components even after 60,000 miles I had it rebuilt in 2016. You look new valve seals and the injectors look amazing
@martinbuilt2 жыл бұрын
I need to do a comparison with the white, green, and red band injectors which have better flow and spray patterns.
@carlosazevedo17904 жыл бұрын
Hi Martin, Been following your built for some time. I have an 2004 WG (European WJ) with the red Bosch injectors on my 4.7 HO. I have recently acquired an DRB III emulator and I can see that my long term fuel trim is at Negative 20~18% and even the short term trim ones are negative 16~18% Can the injectors be the cause? do you have any idea how are your fuel trims with your Denso injectors? Thanks and keep up working on that great machine
@nathan00campbell4 жыл бұрын
i've got a 2008 ram 1500 with the 3.7 v6. got a miss that i feel is an injector, so i want to replace them all. i want to use the Denso 12582704 but i can only find matched sets of 4. where could i find a flow matched set of 6 or 8 if need be.
@lol1233211233214 жыл бұрын
Do you still have your Cherokee? I would like to see a comparison between oem xj 4.0L injectors and the common doge neon 4 hole injectors. This swap has been around so long i guess there's the 12 holes as well. From what I've seen, it should NOT improve mpg as your pcm will provide the same amount of fuel regardless of the flow rate and amount of holes in the injector. Off idle it should be smoother though. The 4.0L is a dated engine now a days and modern injectors don't seem to make a difference
@martinbuilt4 жыл бұрын
yeah still got the XJ. I can do a comparison on several of the popular injectors and the stock ones for the 4.0
@lol1233211233214 жыл бұрын
@@martinbuilt that would be awesome! Thanks for the reply
@dupont4sure4 жыл бұрын
what about the high performance ones from autozone for the 08 4.7l they are AUS performance fuel injectors
@martinbuilt4 жыл бұрын
do you have a link to those injectors?
@dupont4sure4 жыл бұрын
@@martinbuilt www.ausinjector.com/
@dupont4sure2 жыл бұрын
@@martinbuilt did you ever test any of the ones from the link i gave you?
@JohnSmith-ot9sc4 жыл бұрын
Nice, I just paid a diesel shop to clean and flow test some scrap yard injectors
@crazypilotstoned3 жыл бұрын
great stuff man, what do you recommend for a 1.4L engine?
@danhambrick63314 жыл бұрын
That was awesome Martin!!!
@martinbuilt4 жыл бұрын
Thank you Dan, I'm really enjoying this injector tester.
@eliteautorepairrcsd20082 жыл бұрын
what kind of fluid do you use?
@19jody724 жыл бұрын
What would inceasing fuel pressure to 65 psi do on a 40psi injector? Say using 24 lb injectors.. @ 65 psi versus 40psi?
@martinbuilt4 жыл бұрын
It will increase the amount of fuel, so if an injector moves 24lb of fuel at 40psi and then the pressure is increased to 65psi that would turn that injector into a 33lb injector. IMO
@19jody724 жыл бұрын
@@martinbuilt Thanks for the reply..what it is ..2000 stock explorer fuelsystem..returnless..
@19jody724 жыл бұрын
@@martinbuilt 400 hp engine"should be".. there is no adjustment on the fuel system..
@allensnook77604 жыл бұрын
Hello martin,love the denso upgrade demo,been smelling fuel on startup but see no leaks yet,thinkin its time to change out mine.not sure i want to chop up things to make densos work,so just curious the bosh 12 hole type is that for a 4.7l and is it just plug n play or do they also require tweaking to fit,also how much they run for 8 pieces???? 2002 limited,snookie pa.???
@edhanson2285 Жыл бұрын
Hi Allen, I just had that happen to my 04 Durango. Wondering if you tried the bosh and if so, did they work better?
@NURsMec2 жыл бұрын
Hi what type of ultrasonic fluid you use? What brand pls?
Excuse the question but those injectors are for diesel truck?
@martinbuilt3 жыл бұрын
None of the injectors in this video are for diesel. This injector cleaner will not be able to operate diesel injectors due to their very high operating pressure.
@bayoutrapper2 жыл бұрын
Just found your channel, you seem to be a very knowledgeable mechanic, at least a darn good injector man. I have Keihin injectors on my 2011 Triumph America I'm working on now. Do you know much about Keihin fuel system? I'd like to see how they look on your machine. Thanks for the informative video, God bless.
@martinbuilt2 жыл бұрын
Thank you, sorry I'm unfamiliar with Keihin injectors.
@bayoutrapper2 жыл бұрын
@@martinbuilt Well, nobody knows everything, lol. And, One never knows till they ask. Still I learned from your video, and appreciate your honesty. I will be a subscriber from now on, to see what else I can learn. Thank you for taking the time to answer my question, and make the videos you do sir. I'm nearly 53 and am pretty good with carburetors, been tuning them all my life, but all this computer controlled apperatus is like learning Greek in some ways. I'm catching on but search for every morsel of information. Again thank you sir, and God bless.
@deiankolev67193 жыл бұрын
Hey Martin! Another Vegas local here with a 4.7 WJ. Have you ever experienced a rough idle and engine shake intermittently? Usually happens after engine has been running and is restarted after a short break and lasts no more than 5 mins, correcting itself eventually, only to happen again randomly. I replaced my spark plugs hoping that would fix my issue. Thinking about replacing the fuel injectors next. Do you think they could be my issue? Thanks in advance!
@martinbuilt3 жыл бұрын
check the fuel pressure at the rail make sure you have around 49 to 52 psi. Any code like a misfire code?
@deiankolev67193 жыл бұрын
@@martinbuilt Thanks for the quick reply Martin! I do have a code, P0442 for a small evap leak and have smoke escaping from my driver side rear bumper, similar to the issue you had.
@moparlife14 жыл бұрын
what fuel pressure are these tested at?
@martinbuilt4 жыл бұрын
45 to 50 psi
@moparlife14 жыл бұрын
So what’s the flow rate difference at 58psi on the denso and the stock injector? This injector test is good for the early generation 4.7l engines that run a factory fuel pressure of 49psi on jtec pcm but what about the engines running ngc pcm and set for 58psi. Is this a test you could do?
@martinbuilt4 жыл бұрын
@@moparlife1 really all injectors should be tested at the same psi like witchhunter.com does. They test every injector at 3 bar or 43.5 psi that way you always comparing apples to apples.
@moparlife14 жыл бұрын
I understand the need for bench mark testing but raising fuel pressure will greatly effect the flow rate of any injector. I have tried the denso in my 2005 dakota 4.7l and the ngc pcm was not able to compensate for the increase in flow rate. My long term fuel adaptives maxed out and couldn’t reduce enough percentage of the injectors. I set dtcs for too rich. If you machine is capable to raise pressure for testing try it out see how much of a rate difference there is. There’s already a major difference in flow on the accelerator test you did in the video. My truck has a ported throttle body, cold air intake,straight pipe exhaust with 2 resonators and is tuned with super chips 91 octane tune.Not heavily modded but not stock.
@lagunacorona4 жыл бұрын
I just want to find the best fuel injector money can buy that are the most efficient and have the flexibility to be tuned for a wide range of power. Basically I want the best mpg and reduced emissions with the most tunability for higher power.
@richtyler13532 жыл бұрын
Will the Denso’s fit on a 97 xj 4.0
@martinbuilt2 жыл бұрын
They would physically fit other than the connector would be wrong you would have the E V-1 connector where the Denso have the EV6. And the Denso would also probably be a little too much of a injector for the 4.0
@felo1298994 жыл бұрын
Regards!! I am having problems with my machine, when I try to drain it’s start the timer but does not drain... How can I fix this problem? I will appreciate your help with this problem!!
@martinbuilt4 жыл бұрын
I really don't much about how to fix one of them. Have you tried to unplug it? That might reset it.
@daymianhayes24934 жыл бұрын
Amazing content, thanks!
@martinbuilt4 жыл бұрын
Glad you liked it!
@daymianhayes24934 жыл бұрын
@@martinbuilt Im interested in purchasing a valve spring compressor from you, I messaged you on FB. Happy new year!
@justinburney83193 жыл бұрын
So I have been using your videos alot here lately trying to do the ho cams and intake swapping. I've got a question for you and see what your opinion is on the issue. I know I've seen some car guys wrap the injector rails with heat shielding tape. Does that do anything for improvement on fuel mileage and power, or it a waste of time?
@martinbuilt3 жыл бұрын
That is actually a good idea I have done it to my 4.0 in my XJ, it would be a performance mod.
@ronhobyak99023 жыл бұрын
Does more fuel = less miles per gallon ? I saw a video that shows 2,4,12 holes change spray atomization but the flow is equal amount of fuel.
@martinbuilt3 жыл бұрын
not necessarily the ECM (computer) can compensate for the added fuel to a point. I have run injectors that are capable of delivering more but I get better MPG because of the improved spray pattern.
@danielq.4371 Жыл бұрын
@@martinbuilt how much more?
@syedsadiq44463 жыл бұрын
Hey Martin will that Denso fit for 3rd gen Hemi? Thanks
@martinbuilt3 жыл бұрын
I would have to look into that, not to familiar with the Hemi's
@TxHylyner2 жыл бұрын
Would these Denso injectors work in a 4.0 jeep? What’s been your experience there? Trying to get the best option for my engine.
@warriormanmaxx8991 Жыл бұрын
How about doing your own research? Or is asking questions easier.
@mtmmabela16452 жыл бұрын
How much pressure used for testing?
@martinbuilt2 жыл бұрын
I like to use 43 psi or 3 bar but sometimes I turn it up to 60
@kd1366 Жыл бұрын
Where is business located?
@DarrensTruckzs4 жыл бұрын
When pulling my injectors out of my 2002 Dodge Ram 5.9 magnum I noticed at the very end bottom of injector there is a round plastic gromit or seal .. some came out with injector no problem some were so brittle the broke an discinerated into nothing or into small pieces .. are these important An should I get or can I get new seals or can I jus put injector back in without
@martinbuilt4 жыл бұрын
Technically the only purpose they serve is to hold the O-ring on to the injector you could install the injector without what is called the pintle cap I personally wouldn't do that. You can purchase new o rings and pintle caps.
@DarrensTruckzs4 жыл бұрын
@@martinbuilt ok thank you
@simplythesimplest14 жыл бұрын
Hey Martin, Are you familiar with the Siemens 12 hole injectors and how they perform? I found a set on eBay for a good deal
@martinbuilt4 жыл бұрын
I check it out, odd that it has the 53032145AA Siemens part number that is the same part number for the 2 hole injector and it looks the same with the red band at the bottom. I have my doubts.
@simplythesimplest14 жыл бұрын
Ok thanks for the info! Have you ever had issues with the Jeeps not liking the 12 hole injectors? My dad tried them in his and it wouldn’t run well at all and he had to put the stock ones back. It seemed the computer couldn’t recognize the new rate of flow
@martinbuilt4 жыл бұрын
@@simplythesimplest1 I have 12 hole injectors in both the 4.7 and 4.0 and they work great and know of may others running them with great MPG's and drivability, did your dad reset the ECM that may be the trick.
@simplythesimplest14 жыл бұрын
Oh ok good to know. And I don’t believe he did. Is that done by disconnecting the battery and grounding the power wire with key in the on position for like 15 minutes?
@martinbuilt4 жыл бұрын
@@simplythesimplest1 yes that is the quick learn but there is just a little more to it they that.
@kevinkassie85734 жыл бұрын
hi what fluid do you use for the flow test and the ultra sonic bath?
@bharris9753 жыл бұрын
Where does the liquid for the spray test go in?
@martinbuilt3 жыл бұрын
Using the funnel the Liquid goes in where the injectors mount so your pouring it into the glass tubes. That question is come up several times I think I just need to do a video on it.
@bharris9753 жыл бұрын
@@martinbuilt Thank you so much! Love your videos, so helpful!