How to Remove Timing Cover 3.7 & 4.7 Dodge, Jeep, Chrysler and Mitsubishi

[@abdullahshaik4784]

I have watched this video so many times every time it build confidence I can do it . I recently learned to change the oil on my Jeep . Then I changed differential oil . Did basic stuff . Bought me a impact tools . I have to say it loud . Thank you so so much for explaining in detail. I have no words how much thankful I’m so explaining and taking time and showing things as you do it .

[@zeusbuilds1886]

keep going man we all start somewhere it’s trial and error you can learn anything and everything 🤝

[@landonknight1631]

I hope you know that you're a national treasure. It's because of you that I have a chance of being able to do this myself instead of having to pay a mechanic, and Lord knows I would really rather not spend that money right now. Thanks you so much!

[@martinbuilt]

Wow thank you, I knew I was a self proclaimed genius, rock star,and legend and now I find out I can add a Nation Treasure to the list...Lol

[@user-uj3zk2cx8t]

Keep it in your pants man. This guy is a human just like the rest of us

[@jontonomousw7161]

Hey man thanks so much for the interlude of not taking off the water pump blots, super helpful

[@X6084ZW]

Very good video Martin. Camera work is great. Information is great.... and no dead filler time. There are far too many instructional videos on KZbin that are a waste of time. Thanks for making good videos. Highly recommended!

[@cward91279]

I was working on my 2003 Dodge ram 1500 and for the life of me I could not figure out where the 14th bolt was or where it went on my timing chain cover until I finally found your video and I could see the bolt sticking out... Thank you very much for making your video

[@martinbuilt]

You're very welcome. i'm glad you liked it and found it helpful. Thanks for watching.

[@dbement918]

I just got an engine from the scrap yard to rebuild for my 02 jeep grand Cherokee, before it goes out on me. You couldn't be making these tear down videos at a better time for me! lol

[@williamwarner6383]

Hi, I am looking to buy a used 2001 jeep grand cherokee with a jumped timing belt. How was the process of replacing the timing belt? I just need to know if its doable at-home by someone who knows cars, but isnt really a mechanic.

[@MarcoRodriguez-lr2xt]

@@williamwarner6383 its doable. just take your time and make sure timing marks line up.

[@FW-jq1ox]

This video gave me the knowledge I needed to repair my Ram 1500's timing cover! Thank you for your help!!

[@truebeliever5233]

Thank you very much Mr. Martin. I just made it through the cover with y'all's help. Hopefully you will be showing me how to put er all back together after you show me how to replace the oil pump. I really couldn't do this all with your tips and guidance as this ole Dakota is a new adventure for me.

[@toddbelt759]

Great Video!! I'm not sure if it rubs Marty the wrong way but I'd like to add that when you wack the back of the cover if you've missed a bolt it can be decieving! So if it gives you trouble look for that bolt.

[@felicitous48]

I just bought a reman 4.7 from Powertrain that I'm putting in my mom's Jeep for her. I appreciate all your videos! I'm having trouble getting my socket into the tensioner bolt. It's recessed and seems to not leave much room.

[@martinbuilt]

You'll need a thinner wall and deep socket to reach that bolt

[@OutJeeping]

Just bought a dodge ram with a 4.7 so these videos are going to be handy, thanks!

[@martinbuilt]

Glad I could help.

[@livenfree]

@martinbuilt Just got the timing cover off. Your video was a great help! Especially showing what bolts to leave water pump on. I was surprised by how much coolant came pouring out. Be sure to have a large tray & a pan. I tried removing engine block drain bolt but wouldn't turn. Was afraid of it breaking. Though there is no place for gaskets that I can see on my Jeep 2005. 4.7L. Just seeing some old brittle remains of gasket material along inside edges.

[@martinbuilt]

Glad it helped, yes some later models just used RTV and a few O-rings around the coolant inlet and ports.

[@truebeliever5233]

If you just let the coolant run the neighborhood cats and dogs think they are playing for FLorida State and lap it all up like it was Gatorade so no old coolant needs to be disposed of. Gotta love our furry friends. (Sarcasm PETA Patrollers)

[@tammys3425]

He is awesome sauce!!!!! All tutorials should be like this!!!

[@jamesjines3996]

Just done this job. Perfect video! Helped me immensely I’m very appreciative. Any way you happen to have a video of replacing all the seals and gaskets on/in the timing chain cover?

[@martinbuilt]

Thank you. I'm glad you liked it and found it. Helpful. You may want to check out this video where I do the entire timing chain and gear set replacement kzbin.info/www/bejne/ZpOrqYpmprpnjbM

[@jamesjines3996]

@@martinbuilt done and done as well. My truck runs great now, that zip tie trick was amazing made it so much easier. I’m not a mechanic but I am very mechanically inclined. And honestly this is not necessarily an easy job for the average DIYer but with these two videos I got it done. In one night might I add.

[@jamesjines3996]

@@martinbuilt I also used your video on lash adjuster replacement and done that job as well. This channel is a 4.7 owners dream. A video copy of a chilton Haynes manual.

[@denniskordelewski6804]

Remarkable tip on different bolt lengths!

[@martinbuilt]

Thank you I'm glad you liked it and found it helpful and thank you for watching.

[@Y4zz0_Th3_Th3rian]

Great Video, I have never done any of this before and need to replace the coolant system on my Aspen. These videos have been life savers on how to remove that balancer (I didn't even know the name of it until this video, that is how much of an amature I am)

[@silverpuppet3728]

Neither has he. U can tell that he's learning as he goes along. I was waiting for that timing chain cover to drop on his toes

[@jw11432]

I wish you had a video start to finish on how to do a head gasket job with engine still in the car. I'm getting ready to do that soon and there's not much content for that. I've done plenty of head gaskets before, even some rebuilds, but knowing what to expect on an engine/vehicle you've never done one on would be a huge help particularly for saving time.

[@martinbuilt]

Yeah I've been lucky so far I haven't had to do a head gasket or cylinder head replacement so far otherwise I would have a video out on it.

[@jw11432]

@@martinbuilt I may have to do one then.

[@marwanbouzaid3063]

Can we see how it's done with the engine in its place inside the car. That's a whole different ball game.

[@Nissaninthewoods]

Its about the same. Just some extra stuff in the way. If you have some basic understanding and knowledge of working on cars and truck then you should be fine.

[@Mackahroney]

Super easy but i started working on a 3000gt vr4 so working on a ram 1500 is super easy haha

[@inibrasiumthefirst2680]

Yeah it's just a little harder In the truck but not hard at all. These american v8s are the easiest to work on

[@OwenBooth-fr2cs]

remove the bumper raidatior

[@randywade389]

If you do this when the engine is still in the vehicle what all do you have to remove to get to the timing chains? Did you remove the radiator, etc.? Great videos.

[@user-nf3ys9vg3k]

Did you too, waste money on an instruction manual? Martin here basically makes you an expert. 🙌 great videos

[@rmp608]

Thank you!!Owe you a cold beer!!

[@martinbuilt]

Glad you found it helpful.😎

[@Steubenville_PoPo]

For remembering the bolts, I was told long ago, the bolt that goes in the hole is the one that sticks out 1.5 times the diameter of the bolt.

[@s.b5412]

Good job Martin I like you're job always when I watch you .

[@BenjaminHansen]

Thanks for this and your other videos, I needed them. For the Dewalt not removing some of the bolts, I have noticed the more socket attachments that are used, the less impact effectiveness the Dewalt has. At least that is my experience with impact tools not performing to their full potential.

[@melvincherry5061]

The replacement gasket comes with small water jacket seals that don't fit. The part number is 46000. Are they suppose to fit?

[@jjsullivan4462]

just out of curiosity, the bottom bolt hole for the thermostat housing hose broke in the back. the little protrusion cracked straight to the timing chain cover so the bolt no longer holds firm. could I in theory shave that protrusion down, add a few washers and two backer nuts instead of replacing the entire cover?

[@tomaspindur7258]

Hi Martin...great videos...thank you...just wondering if you have the video of this rebuilt engine? I am about to get ready to rebuild mine and I have used some of your upgrades but than my head gasket blew but I did not see any videos of you taking down the heads or rebuilding the whole engine...maybe you can point me to the right direction?

[@toddbelt759]

HUGE TIP TO FOLLOW he mentioned using 6 point sockets and that ain't no joke folk

[@same1eka]

3:30 why don’t you push instead of pull. One hand pushed the socket onto the nut and use your body weight for more leverage.

[@davidkieffer7278]

This is helping emensely with doing this job on my 04 H.O.

[@martinbuilt]

I'm glad you found it helpful thank you for watching.

[@ozarkcharlie9331]

Perfect. Friend perfect.. Im rebuilding my 4.7 as i type this. Makes it way easier. Thanks👍👍

[@martinbuilt]

Glad it helped

[@philjackson9996]

OK, thank you, Martin! What's strange is that the gasket kit came with a tube of gray silicone, no kidding!

[@bnit2c]

what do you do if that bolt you where talking about on the tentioner mine is striped and tight as heck

[@quaidmiller5998]

This was a big help thanks a lot

[@martinbuilt]

You're very welcome I'm glad you liked it and found it helpful thank you for watching.

[@howardsnyder302]

What are the torque specs for the timing cover and the tensioner????

[@brownwrench]

I used a 6 point attempting to replace my tensioner and it rounded over anyway. Tried a spiral one next. Still no luck. Time for the ultraviolence now.

[@martinbuilt]

Now that sucks. You may need to cut or grind the head of the bolt off and then once the tensioner comes off the bolt should come right out. Good luck.

[@weshawkins7165]

Good video. I’m a little late watching it but I’m am just now doing one of these. My cover did not have a gasket, only silicone, can the gasket you can get work instead of just using silicone?

[@martinbuilt]

Yes you can use the gasket instead of the silicone and O ring combination. I've done it before and it works just fine.

[@weshawkins7165]

@@martinbuilt I bought the gasket but ended up using the silicone because the gasket didn’t allow the cover to sit tightly up to the centering dowels and against the engine block. I was also concerned that the thickness of the gasket would set the cover further out and since the accessories all mount to the cover I was concerned the serpentine belt wouldn’t be in line with the crankshaft pulley. Anyway it’s all back together and back to the customer.

[@scotthicks3094]

great to know as i have 2 of these, 04 Columbia edition 4x4 and an 03 Larado 2wd and i need rearends for both, any insight ,links for rebuild or replace?

[@martinbuilt]

One of my favorite places on Earth Pick-A-Part you could get a rear axle for $137.50 plus taxes

[@alfonsolopez1326]

What is the thread size of the center bolt , the one that goes into the engine block?

[@MarkAlves1982]

I don't remember where but watched a video you had a tip and trick on how to remove a stock harmonic balancer with a allthread bolt, some nuts and washers. How well does that workout? I really did not want to remove the radiator and condenser out to do timing chain guided and tensioners. Or do you recommend taking out the radiator and condenser? Do you know where I can find that? Or do you remember the list of parts so that I can pick those up at a local machine shop? Thanks in advance.

[@martinbuilt]

I believe this is the video that you're referring to. If you have the hydraulic cooling fan it may be very difficult to remove the harmonic dampener without removing the fan and radiator. Thank you for watching. kzbin.info/www/bejne/ooXOfatqq8mXrac

[@reyesduran79]

Will I have to do any aligning of the TDC? I just want to remove the timing cover to replace the leaky gaskets. Great video by the way and thanks for the tip about not having to remove the water pump.

[@martinbuilt]

No you will not have to do any retiming, simply remove and replace

[@juanrrosadocasanova9926]

So from what I see if by chance I am doing this on an 03 4.7 on a Durango and removing the tensioner and the bolt breaks or the threads strip out, I should be ok by just replacing the timing cover or does that bolt thread into the block?

[@johnscott9347]

I have a 4.7 L 2000 Durango can I get most of the freeze plugs out with Pulling the motor out

[@lukasrivas6597]

Great Video itd be great if you could add some information on the gaskets needed to reinstall the Cover. Not much Information on KZbin on Reinstalling the gaskets cover on the correct way.

[@martinbuilt]

in this video, I reinstall the timing cover kzbin.info/www/bejne/g3-WlGxqi8qpe68

[@mikew.inversegravitycraft]

What if you don’t put the idle sprocket on the dot section what if randomly spin then just line it on the dot,do you know what I mean,like what’s it timing purpose if any real timing purpose like a cam or crack has ???

[@fredyvasquez5117]

Thanks for the timing chain info

[@martinbuilt]

No problem 👍

[@GX--X01]

Behind the timing cover is 3 gaskets are they only for coolant passages or do any of the holes allow for oil to go through.

[@martinbuilt]

Yeah, those are all for coolant passages

[@GX--X01]

@@martinbuilt thank you very much

[@beastlychase]

How do you replace that seal

[@nathanhale7444]

What I want to know is would my 5 speed bolt up to a 318 or 360 in place of that junk 3.7?

[@brackoncorbridge1966]

What's your plans for the build. Just refresh/ or u going more for a performance build. Thanks for the great video.

[@martinbuilt]

Scat Rods, .030 over HO pistons, performance heads, 08 cams, and intake manifold

[@brackoncorbridge1966]

@@martinbuilt nice. Can't wait too hear how it will sound. Through on a thrush rattler mine sounds amazing just saying.

[@tjsteele513]

Martin - did you do a video on how to reinstall the cover?? Is there just one gasket??

[@martinbuilt]

In this video I reinstall the cover kzbin.info/www/bejne/ZpOrqYpmprpnjbM Thank you for watching.

[@NewtownGraphics]

Where can I get valve covers like them? Nice!

[@dakmack7154]

Good watch! Replacing head gaskets in my 05 KJ -Thanks

[@marcogarciabautista853]

It's amazing job my friend, Thank'ssssssssssssss😜

[@tjsteele513]

Martin.. Is there a torque procedure for reinstalling the timing cover? Bolt torque requirement and torque pattern??

[@martinbuilt]

Timing Chain Cover Bolt. 40 (ft-lbs) I would use a cross pattern

[@xAnAngelOfDeathx]

You earned a like and sub. Great video Martin, thanks.

[@dustinsteward]

Great video, thanks for the tips!

[@ninernation6567]

Do you have a video on how to remove a power window motor and regulator on a 04 jeep grand Cherokee Laredo?

[@martinbuilt]

Not at this time.

[@himeedajew]

Is it important to take them off in a particular order?

[@abitoffcenter383]

I know this is an older vid, but it's new to me. I recently bought an 04 Jeep Liberty Sport w/ 3.7L VIN K for the wife. I'm going to have to do and engine swap on it. So before I drop the new-ish motor in I figured it would be be best if I changed out some of the hard to reach parts and gaskets before I put it in. Does this video apply to my particular application? Also, the "new to me" motor has about 105K miles on it. Would you recommend changing all the timing chains, guides, tensioners, idlers, ect.? I do remember reading somewhere that those items are "supposed" to be good for the "life" of the vehicle/motor. If these are just plain old dumb*ss questions, I do apologize for my ignorance on the topic of this specific make and engine. This is the first Jeep/Chrysler product I've owned. It's also the first time I've worked on this particular engine. All of my experience is with Chevrolet and Ford, aside from normal maintenance and brake jobs, alternators, ect. Thank You Sir for your time and effort. I appreciate it more than you know!! Hope everyone that reads this is or has a great day. More importantly, Y'all be safe out there!! Never forget rule number one, as far as working in a shop goes. The goal for today is to NOT die and leave with the same number of digits we showed up with.

[@martinbuilt]

I would leave the timing chains and guides alone I would say those are still good for another 50,000 plus miles. And as far as putting a newer 3.7 engine just make sure the one that you use has the same type of ECM in other words a 3 or 4 plug ECM. Thank you for watching.

[@bigbo7632]

Quick question: I had everything lined up for top dead center both cam gears V8 marks @ twelve idler @ twelve and crank @ six. Removed tensioners and right side rotated to ten, maybe eleven o'clock positions. Will it be good after new chains and tensioners are installed? Will it go back to twelve o clock position ?

[@martinbuilt]

Yes use a vise grip on the Camshaft even though I don't like doing that, to rotate the camshaft when you are ready to install the cam gear and chain.

[@ericcross9788]

Was there a gasket behind that? Im fixing to change one on a 2011 ram 1500 with the 4.7 L v8?

[@martinbuilt]

On a 2011 you will just have O rings where the water passages are the rest is all a Gray silicone.

[@timothycasey6877]

Great video... Rip headphone users though.

[@philjackson9996]

Martin, I have a dumb question, on my 2008 Dodge Dakota 3.7 V6, on my leaking timing chain cover gasket, do I need to use gray silicone even though the gasket material (paper/asbestos?) has an elevated rubber seam that runs around the gasket permeter? If yes, do I put the silicone on the inside or outside of the rubber seam? I've been watching your excellent videos, I'm doing my lash adjusters & rocker arms, too! Phil

[@martinbuilt]

If you have the gasket that has the rubber seam all the way around, I would not use ant silicone. Thank you for watching!

[@livenfree]

I Got coolant leaking inside the engine from the front of the engine down into the oil pan. What all do I need to replace? Where do you think it's leaking from? Wanna sell it once running. Would you replace the water pump too?

[@martinbuilt]

if your looking to sell it, replace the timing cover gasket and hope it's not a blown head gasket.

[@bernieknaupp7602]

I was wondering what gasket set did you use. Felpro lists a set # TCS46000 but neither RockAuto nor Amazon list it as a good part number for the 05 Dakota 4.7 vin N motor yet others say it is a usable part, your thoughts.

[@bernieknaupp7602]

Thinking of doing this next week any response would be helpful.

[@martinbuilt]

That is a good part but the later models went to rubber O-rings and silicone.

[@bernieknaupp7602]

@@martinbuilt thanks, do u happen to know what years can use the complete gasket?

[@martinbuilt]

@Bernie Knaupp Actually, I think you could use the full gasket on all the years they just started using the O rings and silicone to save money.

[@bernieknaupp7602]

@@martinbuilt I just don't know why Felpro doesn't list it as a good part number, strange.

[@philscott9405]

nice vid, wow, lotta work, how many spins on the ole od to warrant the time chn needing replaced?

[@martinbuilt]

Thanks, I don't understand what you're asking.

[@missyidontgiveacrap9939]

He was asking how many miles on the chains before it needs to be replaced.

[@Anthony.sAutomotiveAdventures]

can you clarify when to use the metal timing cover gasket?

[@martinbuilt]

My 04 calls for the O-rings and RTV but I still use the metal gasket.

[@Anthony.sAutomotiveAdventures]

@@martinbuilt my 07 is flat machined on the block and the cover. originally had rtv only. i was worried about the pulleys being out of alignment.

[@jsaathoff734]

@@martinbuilt do you have the part number by chance for it? I found the felpro metal gasket but it says it doesn’t fit so I wanted to verify

[@martinbuilt]

@@jsaathoff734 yea, it says that but it will fit.

[@darwinthompson9219]

I beg you for your assistance ...ive been stranded in Oklahoma i replace timing chain tensioner..where do the V8 marks go on right and left sprockets at 12 ?

[@martinbuilt]

Yes both V8 go to 12 0clock positions, this video explains the timing marks kzbin.info/www/bejne/ZpOrqYpmprpnjbM

[@darwinthompson9219]

Do u have a video on 4.7 cylinder head removal and replacement..cause i bent my valves and gonna try replacing them

[@martinbuilt]

@@darwinthompson9219 sorry no I don't

[@darwinthompson9219]

What do you think is easier replace cylinder heads or get used motor. Cylinder heads seem alot more work. Special tools for lifters..

[@darwinthompson9219]

What motors are interchangeable..i have the 99 4.7 4wd..can i go dodge ?

[@brysonchristopher8181]

My tensioner bolt rounded 😑 i did everything you said AND I barely started i yhink it was previously rounded off any advice now?

[@martinbuilt]

That sucks...you may have to cut the head of the bolt off and then have to replace the tensioner.

[@pablocuadromoreno2763]

what is the name of that yellow tool you are using??

[@martinbuilt]

DEWALT 20V MAX XR Impact Driver amzn.to/3MLaFLp

[@scottyrocket7807]

Thank you .

[@roxanneabbott8424]

Is that how easy it is when its installed in the dodge truck??

[@martinbuilt]

yep, the hardest thing is that one bolt that holds the self tensioner.

[@cepareja]

Hi, I have a problem with a tensioner on my chain. When starting without the cover it looks like one tensioner have oil and the other does not. Do you know why it can be? Grand Cherokee WJ 4.7 V8

[@martinbuilt]

I would replace the hydraulic tensioner. It could be clogged.

[@cepareja]

@@martinbuilt I already replaced and lasted 1 month :( no oil comes out of that hole

[@martinbuilt]

@@cepareja that's not good, how about remove the tensioner and force fluid or air in the opposite way maybe you will be able to remove the blockage

[@diegogonzalez4285]

Where did u get those value covers

[@martinbuilt]

I Polish those myself here is a link to the video. kzbin.info/www/bejne/il68pId8ZrifnZI

[@JF32304]

Are you rebuilding this to do a swap on your current Jeep or to sell it?

[@martinbuilt]

I will do a swap, using so of mods from the engine that is currently in the Grand.

[@JF32304]

@@martinbuilt nice!

[@mickharvey3614]

hey man, thanks for the videos, watching a lot of them, awesome job!. similar paths, 02 dokota, 89 Xj, but you have me on the grand. I need to change the head gasket on the dakota. 70k miles. should i do all the timing chains, gears and tensioners? see a lot of videos with them broken. If I do, the timing chain cover will have to come off, if not wondering if I can change the gasket without removing the chain cover. Maybe hold the chain up when remove head? maybe? thoughts? dont see any head removal videos from you. thanks

[@martinbuilt]

Yeah you will need to remove the timing cover to replace the cylinder head. With only 70000 miles I wouldn't replace the timing chains.

[@mickharvey3614]

@@martinbuilt ah ok, thank man, much appreciated! I see how the guides are, they are more my fear. thank you

[@mexicatrucker6309]

Ever done a head gasket replacement on a 4.7L?

[@martinbuilt]

I have not, I have only removed the heads of the 4.7 that I currently have on the engine stand.

[@mexicatrucker6309]

@@martinbuilt thanx for the fast reply. I was asking because I have to do this in the next week and I have not done this in years. Was wondering about the timing once I put the head back on.

[@martinbuilt]

@@mexicatrucker6309 Yes you will also have to remove the timing cover and redo the timing marks.

[@scjeepHO]

your starting to bring the bug back to start messing with my Jeep again.

[@martinbuilt]

I'm glad to hear that.

[@marcoantoniogarciabautista]

Top speed brother....!.!.!

[@martinbuilt]

Thanks for watching!

[@edwardvincent4050]

Do u know the torque specs for 3.7 for 06 Dakota and sequence.thanks

[@martinbuilt]

The torque specs for the 3.7 should be identical to the 4.7. The only real difference between the 2 engines is that the 3.7 has a balanced shaft.

[@stressedout291]

Can you replace it while the engine is still on the jeep ?

[@martinbuilt]

yes I've done it but I did remove the hydraulic cooling fan to give me the room to get the harmonic balancer off.

[@stressedout291]

@@martinbuilt oh okay do you have to remove the oil pan I have a 2008 jeep grand cherokee 4.7 4x4 flex fuel

[@jonathangomez-vv2dh]

Thank you!!

[@martinbuilt]

I'm glad you found it helpful.

[@1jummen]

How long does a 4,7 last with ordinary maintanance before they break down? a neighbor want to sell me a WJ 4,7 from 2000 with 205052 miles (engine never opened)

[@martinbuilt]

if it's been well maintained I know that people are getting over 300K with no problem.

[@jonathonmann979]

Have you rebuilt the bottom end yet?

[@martinbuilt]

No, haven't gotten too far with it. Been working a lot of overtime to past few months haven't had time. But now it's what's going on I might have the time

[@jonathonmann979]

I have an 03 dodge ram1500 4.7l. And I'm have a little trouble in finding the correct size of main bearings.

[@martinbuilt]

@@jonathonmann979 is this what you are looking for? amzn.to/2ygcm1K you can select std, .010 and, .020 undersize

[@jonathonmann979]

I'm trying to find out what size in need. I'm thinking mine are std

[@wagnermagalhaes00]

Is it really necessary take off water pump to remove timing cover?

[@martinbuilt]

No it's not necessary I noticed you commented on my other video where I remove the timing cover and I show which bolts you do not need to remove if you wish to leave the water pump on.

[@georgegrigsby5411]

excellent video great teacher..

[@martinbuilt]

Thank you, George

[@toddislandrider]

Where did you get those valve covers from?

[@martinbuilt]

I polished the magnesium valve covers, here is the video for that. kzbin.info/www/bejne/il68pId8ZrifnZI

[@johnwilliams6407]

Thank you very helpful thank you

[@martinbuilt]

Thank you for watching.👍

[@zenderlala]

Hı my car 3.7 2004 jeep liberty i can't found 2004 timing chain kıts.is it possible 2003 or 2005 i am from turkey

[@elcadete4189]

What about a 5.7 HEMI charger 2007

[@martinbuilt]

maybe one of these days when I'm out at Pic-a-Part I'll do a video on that.

[@moonrocktank7771]

Great video as always, Thank you!

[@Traveltech360]

Great video

[@martinbuilt]

Thank you glad you enjoyed it.

[@keonfulks3847]

Do I have to lift my engine out of my jeep to do this?

[@martinbuilt]

no I have done this to my 04 Jeep Grand, I did remove the radiator fan.

[@DizTraveler]

Long time ago I seen you snapped off a bolt or broke your socket wrench at pick a part...I bet that memory came flashing back at you....also sorry about not catching up with you when I flew to Vegas back in March...!

[@martinbuilt]

Yeah, that one bolt had me a little concerned.

[@thelazerwhisperer]

@@martinbuilt im having dramas with that one bolt in question, i dont think i will be able to get it out normally. what would you do if it didnt want to come out ? i do havw another timing cover of the other motor i managed to get that bolt out. im thinking im going to have to cut into the timing cover to expose it to gain better access. does that bolt go into the block or head if you know?

[@farerse]

are timing covers prone to leakage at the bottom on 20 year old cars? I have seen 2 cars of different makes leak there..

[@martinbuilt]

After 20 years any engine is bound to develop some leaks. This engine was showing signs of seepage there. On my 98 with 4.0 I use conventional motor oil this seems to help.

[@farerse]

@@martinbuilt true.. I think mine is leaking both oil and coolant there but only slightly.. thanks for uploading this video in case if I will change my gasket

[@fireantsarestrange]

Thanks man.

[@martinbuilt]

You're very welcome glad you found it helpful.

[@shamarg5012]

How much hp does your engine have now??

[@martinbuilt]

don't really know, I would say 290-300

[@flwfranco2821]

+martinbuilt Fløw here, it be cool to see some kind of aftermarket internals on your rebuild👍🏼👍🏼

[@martinbuilt]

You will just received some aftermarket parts today and more on the way

[@asapcornerstone7851]

Is that a H.O your gonna rebuild ?

[@martinbuilt]

Yes, I'll have it bored .030 over, balanced and some performance goodies.