Marvel vs Capcom 2 (Arcade1Up) mod, installing Big Blue, Yoga Flame and Retroarch.

[@jcsworld69]

The mods in this video should technically work on the new Marvel vs Capcom 2: X-Men ‘97 Edition Deluxe cab. Don’t forget to also install the Player 2 fix “FighterDroid2P”. 👊👊 kzbin.info/www/bejne/pXfdmoCJj8ynm5I

[@ahsaanqadir4303]

All these haters hating on the music, I just appreciate you for making this video!! Makes it so much easier. Thanks man

[@jcsworld69]

Thanks! Please like and Subscribe, it helps out the channel! :)

[@randubs1206]

I Like it lol

[@joeystormtrooper]

Followed your guide step by step and was able to get Yoga Flame and Big Blue working. Thanks so much!

[@jcsworld69]

Awesome! 😎 Did you also do the FighterDroid 2 player fix?

[@joeystormtrooper]

Not yet, is this to be used with Retroarch? I haven't installed that yet.

[@jcsworld69]

@@joeystormtrooper yes, it’s for getting the player 2 controls to work with Retroarch.

[@joeystormtrooper]

@@jcsworld69 just watched your other video on it! I noticed you map the coin button to ctrl, do you just always have a keyboard plugged in?

[@jcsworld69]

@@joeystormtrooper yeah, I had to do that because there aren’t enough buttons to map to it. For some games like Punisher, TMNT, Simpsons, Alien Vs Predator etc… the coin button for player 1 will work for player 2! However for other games like TMNT Turtles in Time, you would need to have the keyboard plugged in to insert credits for player 2. I have a Rii wireless keyboard hooked up to it, whenever I need credits for player 2 I turn it on.

[@jovichau-gandelmanbaseball3828]

Dude the music is so creepy I feel like Michael myers is going to jump out of the riser lol . Good tutorial though . Thank u

[@jcsworld69]

Thats my jam lol! The MVC2 cab is x10 better with the additional games.

[@thealatorresquad]

HUGE HELP! couldnt get the nova launcher to work, until i found your video. Didnt know that the new nova doesnt work i had to find your video to discover i had to use an old one. I have the mvc 2 cab, i downloaded mvc1 apk. not sure if that overkill or not. also the nes and snes apks. any suggestions on if i should keep mvc1? or any other releases i might not know about. Anyway great video, settings are different on this nova as compared to Alex using the newer one

[@jcsworld69]

Awesome! Glad I could help!! For the MVC1 APK it’s up to you if you to keep it, but the duplicate games will take up space. The NES and SNES APKs are cool because you can launch the games from the main screen, the buttons are mapped and I believe player 2 will also work ! I might do a video for those.

[@wutang_batman]

Some of the files on your list im having trouble finding. Type them in exactly as you have too. And cant see those 2 mvc2 jpegs either 😩

[@chrisdavid2408]

i am going thru this process step by step and there is a lot of content across youtube and all of it is unorganized. this isn't a tutorial on how to get the apks very frustrating for people learning. great video btw

[@jcsworld69]

Hey… you can getmost files from the Internet Archive site and do a Google Search for the rest. Type in the file names as per the description in this video.

[@lewis6720]

Doing the retroarch part of the video and have a question. Do you have to put retroarch and the roms on internal storage? I have the yoga flame cabinet and it comes with 4gb of space. Can i just run everything on the sd card? Thanks

[@jcsworld69]

Hey… When I installed it I put Retroarch on the internal storage and the rims on the micro SD card. I believe you should be able to install retroarch on the microsd card as well. Watch Alex Ventura’s video.. he modded the yoga flame cab.

[@aldouscoco]

Hi! I've tried 3 different usb keyboards.. retroarch doesn't let me move, it says "not configured, using fallback".. Any idea of a workaround? Thanks!

[@monason77]

I’m having the same issue 😢

[@jcsworld69]

Unfortunately I didn’t encounter this issue. What I suggest is: Do not use a USB hub… try connecting it directly, then use the got swap method for the mouse.

[@jcsworld69]

Unfortunately I didn’t encounter this issue. What I suggest is: Do not use a USB hub… try connecting it directly, then use the got swap method for the mouse.

[@Alliat6364]

I have this as well. I started with the Logitech k400 Pro which is a wireless keyboard that I've used multiple times with RetroArch before, then a gaming keyboard and finally an USB Apple keyboard but no input. I can move the mouse but not click. Right clicking does not return me to the launcher as it does in other apps. I also tried six gamepads but always got the same message. I tried uninstalling and reinstalling and even tried older version and a 64 bit version. I'm starting to lose hope. Have you guys found any workaround?

[@jcsworld69]

@@Alliat6364 unfortunately it looks like some cabs are affected by this problem. We haven’t been able to find a solution for this :(

[@chrisriddle]

Thank you for this guide. I installed the apk’s, but for some reason they freeze on startup. Do you have any tips?

[@jcsworld69]

Sorry, I didn’t encounter this issue. Have you tried factory resetting and starting again?

[@chrisriddle]

@@jcsworld69 thanks for the prompt response! I was actually just about to respond again. I got it to work. I was following your guide and another one at the same time (that easy1up softmod) the apks didn’t need to be cloned so all I had to do was get rid of the clones and install the apk’s normally. Everything’s running great, thank you for such a comprehensive guide!

[@jcsworld69]

@@chrisriddle cool! Maybe something has changed since I originally uploaded this. Can you share the link to the other video. Thanks

[@chrisriddle]

@@jcsworld69 kzbin.info/www/bejne/o2LKnKp6mp6Wbdksi=Mx0V1LfFbRexbdb6 This should be it. The ADM softmod guide. I had two on at the same time to make sure I was understanding the info but yeah for the apk’s in the folder from this video there’s no cloning necessary

[@jcsworld69]

@@chrisriddle thanks

[@goodwinsretrovertigo6197]

So I have installed the other APKS and got retroarch up and running however notice on retroarch arcade roms have noticeable slow down and stuttering, the few games I have played are Aliens Vs Predator and Bubble Bobble, I am using the fba neo core. Dreamcast seems to run well apart from DOA2 but I have read elsewhere this is a difficult game to emulate on the MVC2 Cab via flycast. Surely FBA neo emulation shouldnt be this bad or am I doing something wrong?

[@jcsworld69]

Hey Bruv, Weird … for me AVP runs well. Have you tried using a different core? I just keep trying different cores until I find the best one for the ROM and then set it as default.

[@jcsworld69]

Halloween|MVC2 mashup! 🔪

[@nemuyume]

Hi, thank you for the guide. I have a problem installing retroarch, after installed i can t navigate through the menu with a keyboard. I ve tried different model, but it always say (keyboard model) not configured, using fallback. I ve seen that other users had the same problem with retroarch on this cabinet. Can you upload your retroarch.cfg file from the cabinet? Maybe if i swap it could work? What keyboard model did you used?

[@jcsworld69]

Hey, try uninstalling/reinstalling Retroarch. Also are you using a USB hub? Or connected straight to the PCB? Try using a different keyboard, that might resolve the issue.

[@MimicVega]

I've run into the same issue, and to confirm, this is the same Retroarch version 32-bit. Let me know if entering slipping a config file into the Retroarch folder works, we could remap using our PCs and take it from there. I ran out of time to finish this process today, but if I find anything out this weekend I'll share my method. Best of luck.

[@jcsworld69]

@@MimicVega unfortunately I didn’t encounter that issue during my install. Let us know if you can figure that out. ✌️

[@nemuyume]

@@jcsworld69 hi, i ve resolved the issue, but in a very elaborate way. First of all i used retroarch 64 bit ( i don t know if it could work with 32bit version too) and i hade to connect a dualshock4 v1. With that i could navigate with the arrows, but no button worked. But when i quit to nova using the live button and than re-enter retroarch A and B button on the arcade stick worked if pressed before the ds4. Than when i had to use again the ds4 arrows i pushed the live button again, re-enter retroarch a continue the configuration like that... i disabled the autoconfig in the option and enable an option that let you navigate with all players connected (not only player one). If I remember correctly this way i could use ds4 and A and B button without the need to use the live button to exit. Than i configured the arcade stick following your guide and now is working. I advice strongly to backup the retroarch.cfg after completed every step because often it got resetted and i had to do all the above steps again...

[@jcsworld69]

@@nemuyume I found this on Reddit.. not sure if it’s exactly the same issue. www.reddit.com/r/Arcade1Up/comments/yo0rhg/please_help_mvc2_retroarch_softmod_controller/ In this thread someone says they performed step #5 from this tutorial to get it working. leansmarthomes.com/arcade1up-custom-4-player-control-panel-mod/

[@brokenbossa]

No luck getting this to work on my X-Men '97. Getting stuck at the dreaded RetroArch not detecting my keyboard/controllers. If anyone has a fix or workaround please share!

[@jcsworld69]

@@brokenbossa some people said using a PS3 controller or 8bitdo controller worked for them … try that

[@lovepets8495]

Hello friend, great content as always. Quick question, not sure if you would know. Could I run MVC2 on my yoda flame edition machine? If I could would it have any issues, thanks in advance for your help 😊

[@jcsworld69]

Hi Lovepets8495… unfortunately The Yoga Flame can cannot run the MvC2 APK. However you might be able to get it running on an emulator such as Flycast. www.reddit.com/r/Arcade1Up/comments/10h0lo5/anyone_have_success_yet_adding_mvc2_to_the_yoga/

[@lovepets8495]

Thank you, I came across that thread too, just wanted to check with you. Keep up the great work 👍

[@jcsworld69]

@@lovepets8495 thank you! 🙏

[@BeginsWithTheEnd]

Is there not a way for someone to save the image like this after it's already set up so people can just copy those files over?

[@Tenchion]

Hello, thank you for the tutorial. Finding apks and setting up the retro arch was pretty time consuming but eventually I was able to install everything. I have several problems after installing everything: 1) Everytime I launch the Yoga Flame or Big Blue APKs they are resetting the Nova Launcher as a default launch application - it's funny this problem doesn't persist when I lauch the original Marvel vs. Capcom 2 APK. The problem is a little bit disturbing because when Nova Launcher isn't a default launch app double tap LIVE shortcut doesn't work and I have to use mouse + keyboard to change the launch app. Did you have a problem like this? 2) I'm having a problem with launching a Dreamcast Retroarch Flycast: do I need to upload a Dreamcast bios to android version of retroarch? I tried to launch a Soul Calibur ROM and it says it doesn't recognize the game :/ 3) Is it possible to launch Retroarch roms from microSD directory? I purchased a microSD card to put all my roms there but I don't know how to set it up. Thank you for the tutorial, I'll be very grateful if you help me with these issues :)

[@jcsworld69]

Apologies for the delayed response. 1. ) No, I don’t have that issue. Have you tried resetting it back to default and reinstalling the APKs? Maybe that will resolve the issue. 2. I haven’t installed the Dreamcast, so I’m not sure. On the comments @goodwinsretrovertigo6197 confirmed that Flycast runs pretty good with the exception of DOA2. 3. Yes, it’s possible just load up the ROMs on the SD card. Create a Folder called ROMS on the SD card and add all the ROMs. Insert the SD card into the cab and launch Retroarch. Run the core. Then in Retroarch select Load Content: /Storage/The SD card will be called an eight digit number ####-####. Select that then find the RoMs folder, launch the ROM.

[@noobsgamingcorner]

If I follow this guide will it allow me to play snes games with retroarch?

[@jcsworld69]

Yes, this guide will help you with. installing Retroarch. Then at around the 16:45 mark make sure you install the Super Nintendo Cores (e.g Snes9x …etc)

[@noobsgamingcorner]

@jcsworld69 thanks! Will try it tonight! Thanks for the quick reply and thanks for this guide!

[@TheChallenger1980]

Great tutorial on this. The only concern I have is making sure I cant accidentally delete the game icons on the main select your arcade1up menu. My 4yr old son managed to do this on the simpsons. Is there an option to avoid this?

[@jcsworld69]

Thank you! Please hit that Like and Subscribe :) Weird, which combination of buttons did they hit on the control panel? Or did they delete it while a keyboard was plugged in?

[@TheChallenger1980]

@jcsworld69 It seemed like when the widget icon for an apk game is highlighted on the "Choose A1up" screen, you could hit and hold a button on the control panel? (It has been a while), but it would que a small pop-up that had the option to delete or hide, I think it was. The keyboard or mouse was not plugged in. I was wondering if it was an option for the widget icons I could change so you couldn't delete with button combinations. Thanks in advance

[@TheChallenger1980]

​@@jcsworld69don't know for sure which combination

[@jcsworld69]

@@TheChallenger1980 with the way this is set up, I don’t think it’s possible to delete the shortcut using arcade sticks/buttons.

[@validcore]

How do you play the retroarch games after the install? Donyou always have to have a keyboard hooked up to access those?

[@jcsworld69]

@@validcore you create a shortcut for Retroarch and click it each time you want to play it. Once you have set up everything the Keyboard is not really required. You will need to map the player 2 coin button to one of the Keys. Some games will require the use of the keyboard so that you can add coins for player 2.

[@validcore]

@jcsworld69 thanks for getting back! Doing this mod for my birthday!

[@jcsworld69]

@@validcore awesome! Happy Birthday!

[@kjmullinz]

So after this softmod that pretty much puts all the atreet fjghter A1UP cabinets into one, I'm still able to play online on the servers like it was still the A1UP cab right

[@jcsworld69]

@@kjmullinz hey… you can continue to play the original games online. The games added by the soft mod will be local play only.

[@raoulduke8094]

Do player 2 controls work ok for the apk games? I understand its only 1 player on retroarch.

[@jcsworld69]

Hi Raoul, yes … player 2 works on the APK’s!! 👍👍 It’s like having the actual cabinet. The only thing that doesn’t on the APK’s is the Online play. Please hit that like button and subscribe!!

[@FluffyGameplay]

Hi how well does Ninja Baseball Batman and the PS1 Tekken games run?

[@jcsworld69]

I haven’t tried those games yet. 2D animation games run fine… not sure about 3D animation games (probably wont run as smooth). Maybe someone else can confirm?

[@zm332]

Is it possible to add any other cabinets to this namely mortal kombat or ms pacman 40th ?

[@jcsworld69]

Hi zm332, To my knowledge the MK cabs are not Android based, therefore there isn’t an APK available. To play MK you would need to install Retroarch and get the rom(s).

[@TheUncleBuggy]

I am trying to go through this tutoria on a MvC2 cabinet, but I'm, having a problem with the very start, Windows + N does nothing when I press it. My keyboard works, and I can even use it to go through the menus when its pluged in, but i cannot get that menu to pop up. Also If I start the machine with the keyboard already plugged in, as soon as the initial animation finished, there is an error, "Key chain has stopped," and the only option is to close that app,. Can you help?

[@jcsworld69]

Hi… are you using a USB hub to connect the keyboard/mouse? If so, try connecting the keyboard the directly… see if that works. Another viewer reported issues with using a hub.

[@TheUncleBuggy]

@@jcsworld69 I have managed to get this working by using a different keyboard. Both a logitech G910 and a usb keyboard with touchpad. These both work with the hub or without. I now have another problem, that others seem to have. No keyboard, whether connected directly or via the hub, will let me scroll to settings in retroarch. Can you offer any advice?

[@jcsworld69]

@@TheUncleBuggy awesome!!

[@TheUncleBuggy]

@@jcsworld69 The awesome part is I've now solved my retroarch problem...but it wasnt easy. I've got an A500 Mini, and that has a wired controller. When I connect that up to the cab, in retroarch the d-pad works to go through the menus, but the buttons dont work to select anything, and having this controller detected by retroarch, stops it using the buttons of the cab to enter things. What you have to do is use the A500 mini pad to start retroarch and scroll to where you want, double tap the live button to go back to the desktop, then re-start retroarch using the cab controller. Retroarch will be where you left off, so you can press the A button on the cab to enter that menu. You then have to repeat going back to the desktop and restarting retroarch with the A500 pad for movement. Once you get to where you can configure joystick, your problems are over, and you no need to do this swapping. Hope this makes sense, and will help you and others who come across this problem.

[@The_OriginalGamer_]

Why does this look like an mvc1 cab. Can you install mvc2 on the mvc1 cab?

[@jcsworld69]

Hey Adiflyguy… this video is of the second cab I soft-modded. My first soft-mod was the MvC2 cab, my second soft-mod was a MVC1 cab with the MVC2 PCB. These steps will not work on a stock MVC1 cab.

[@jesuscardenasfilms2814]

My keyboard nor mouse works in order to map the button on retroark. Any tips or clue as to why this is happening?

[@jcsworld69]

Sorry… not sure. Have you tried a different keyboard/mouse?

[@Giansan26]

When I try to play marvel vs capcom 2 it says I have to do a online update and it freezes and crashes back to the nova launcher, do you have any idea how to fix that issue?

[@jcsworld69]

Sorry no, I didn’t encounter any of that. If it’s giving you issues try factory resetting and start again.

[@NinjaToyReviews]

Is it possible to get marvel super hero’s apk on it ? To add punisher ?

[@jcsworld69]

Hi Ninja, the Marvel Superhero’s cab doesn’t run on Android, therefore there isn’ an APK for it.☹️ To get Punisher running on the MVC2 cab, install Retroarch. 👍 Please Like and Subscribe!✌️

[@noahhine]

Will retroarch run genesis Roms with this soft mod?

[@jcsworld69]

Yes, Genesis and SNES will run on Retroarch.

[@sergiojimvi1]

Hello I'm trying to map de controllers for the player 01 in RetroArch, saved the mapping but once I load a game with a core it does another mapping. Also I can't map the controllers for the player two (my arcade is the same arcade1up marvel vs Capcom 2) thanks in advance

[@jcsworld69]

Hey Sergio.. the Retroarch player 02 controllers for the MVC2 cab currently don’t work. Hopefully there will be a patch for that in the future. For the mapping. Once you have mapped the buttons… they should be good for the majority of the games, but some games you might want to fine tune the controls for a game or a core. To do this, go to: Input/ Hot Keys/ Menu Toggle: Select the combination you prefer… I chose “Start + Select” (Which is the Player 1 button + Live button). Then “Run” the game then press the aforementioned buttons at the same time to bring up the menu screen. Go to Controls/ Port 1 controls and you can tweak them there. Once finished go to Controls/ Manage Remap Files and save the remap file for that game or for the core. Please Like, Share and Subscribe! I will do another video specifically for Retroarch. Note: There is also a bug with Retroarch… there are times when you will launch Retroarch and you will get a message “Extracting Base APK” which will cause some of the configurations to reset (e.g. On-screen display menu, Hot Key Menu.. etc.) so you will have to make the changes again.

[@sergiojimvi1]

Thank you so much I'll see how it goes and I'll let you know!

[@jcsworld69]

@@sergiojimvi1 I’ll try posting a video on Retroarch later this week… I’ll cover things like recommended settings, getting Sega CD and 3DO emulators to work, and some of the nuisances of Retroarch on this cab. Keep an eye out for that!

[@sergiojimvi1]

Thanks a lot, hotkey enable fixed my problem! I'm looking forward to watching the video of your suggested mapping options both for the menu, in-game controls and hotkeys.

[@jcsworld69]

Hi Sergio... I'm glad that worked out for you. Checkout our new vid! kzbin.info/www/bejne/iZW3oHR7as9geNE. Please like, share and subscribe.

[@GAwdLyy]

Hmm I wonder if I did this in revere could I pull the data from the cab and play the os on a pc?

[@jcsworld69]

Not sure to be honest, try using the file manager… let us know if you have any luck.

[@GAwdLyy]

@@jcsworld69 yea imma experiment

[@artcadefourtwenty]

I test these apps when I mod them on an android phone. first off I do not use app cloner, when you install these on phones your controller may work but it will not let you put a coin in unless you have the encoder board made for the cab and somehow can hook it up also you may be able to install it in an android emulator on a pc,but I’ve seen a video of someone do that and sometimes the game don’t even boot these apps are coded to play with the encoder board made for it.they are also made for android so your better off just testing stuff on an android device

[@Marco-ud1kq]

Does this work on the marvel vs capcom 1up Arcade table top ?

[@jcsworld69]

Hey… No, these steps are only for the MVC 2 cab.

[@migueldelcastillo7269]

Hey I’m having a problem with the clone program, It’s crashing when I’m trying to use it. It also blocked me from starting the big blue cloning by not letting me change the clone number. Is there any fix for this ?

[@jcsworld69]

Hey… sorry, I haven’t encountered that. You might be better off factory resetting it and starting over again.

[@migueldelcastillo7269]

@@jcsworld69​​⁠​⁠​⁠ I actually factory reset already, is there a place you got your apk from ? Maybe the version I got is not working. It pops up asking if I want premium features and the maybe later and buy now options are at the bottom. After I press maybe later it crashes shortly after. It worked for a moment once and after that it blocked me after trying to change the clone number version.

[@jcsworld69]

I believe it was in the Internet Archive site.

[@migueldelcastillo7269]

Internet archiveeee ahhh I must need an unlocked version for it to work

[@migueldelcastillo7269]

Ok I fixed the crashing by taking out my sd card (it’s a 126gb)

[@TheTruthHurts.247]

I cannot find the big blue v1.2.2 APK anywhere.

[@jcsworld69]

Did you try the Internet Archive site?

[@wesleynorman6471]

I’m getting an error message of parsing the package. What step am I missing?

[@jcsworld69]

When is it giving you that error? Which step of the tutorial are you at?

[@waterinthedesert81]

Can you play Street fighter 3 third strike online on this???

[@jcsworld69]

Hey Bruv. No, unfortunately only the original games work online.

[@benoscar5708]

Ok but why that music?

[@jamescalabrese1845]

Will this mod work on the X-Men vs Street Fighter cabinets as well?

[@jcsworld69]

Hey James, I think the steps are slightly different. Please follow this tutorial: kzbin.info/www/bejne/ip3Hl5eFlKZ6i6s

[@misterprash]

App cloner version doesn't seem to exsist anywhere??? Is there an alternative or anyone know what can be done as every versio I find seems to stop working in some shape or form

[@jcsworld69]

Try searching the Internet Archive site for that version.

[@misterprash]

@@jcsworld69 I cannot find it unlocked anywhere :( when trying to install any version i find it states I need to upgrade to to any cloning. I am stuck....

[@jcsworld69]

@@misterprash did you check here: www.apkmirror.com/apk/applisto/app-cloner/app-cloner-2-11-1-release/app-cloner-2-11-1-android-apk-download/

[@misterprash]

@@jcsworld69 thanks, the only trouble now is that I'm still being asked to upgrade to premium so it won't allow me to actually clone anything.. any ideas on what I should do? I'm close to giving up now.

[@jcsworld69]

@@misterprash when I installed app cloner on mine, I got a green screen that said “Go Premium - upgrade the premium version for a multitude of options to tweak or personalize cloned apps or to create additional clones”. I clicked “Finish” and that was it. Is this what you’re seeing? Does it allow you to close it and proceed?

[@randubs1206]

So no online for the other APK's?

[@jcsworld69]

Correct, the online only works for the 8 original games.

[@Giansan26]

Do you have a link to all the files you need?

[@jcsworld69]

Google my friend!

[@zaneandrews4700]

Dude why the music

[@jcsworld69]

I would like to have used some street fighter music, but just avoiding the copyrighted stuff.

[@zaneandrews4700]

@@jcsworld69 lol true it's just creepy

[@jcsworld69]

@@zaneandrews4700 lol… we do have some Halloween stuff on the channel. Check it out!

[@GamerSaeM]

Do I have to pay to use cloner app? It is asking for donations in order to clone apps apk.

[@jcsworld69]

Hi Saelee2004… No, you don’t have to pay.

[@GamerSaeM]

@@jcsworld69 Thanks for the reply!

[@ryanl3935]

Will this work the same way to add to Big Blue cabinet?

[@jcsworld69]

Hey Ryan, I believe the steps might be slightly different for Big Blue.

[@jack3dan]

what is this mod what does it due.

[@jcsworld69]

This allows you to install other games (APKs) from Arcade1Up to you cab as well as Retroarch for even more games.

[@EpicChubs05]

Can you still play online after this?

[@jcsworld69]

Yes, you can continue to play the original games online. However, the games that were added as part of the mod will not work online.

[@EpicChubs05]

@@jcsworld69 thank you!

[@jcsworld69]

@@EpicChubs05no worries, if this helped please give us a like and Subscribe! It means a lot!

[@Summonredhellspites]

Can you add mk2?

[@jcsworld69]

Hey Summonredhellspites… they don’t have an APK file for MK2. But if you install Retroarch your will be able to play it there. Note: The Player 2 controller doesn’t work in Retroarch.

[@Summonredhellspites]

@@jcsworld69 your the man.old thrash anthrax style cool.ouch no 2 player mk2..noooo.

[@jcsworld69]

@@Summonredhellspites hopefully, they will come out with a controller fix later… but yeah I have MK1, MK2 and MK3 running with Retroarch! I have another video that goes over some of the Retroarch settings. Please like and Subscribe!

[@Gatsu3D2A]

So ive tried multiple keyboards and a recommended one but retroarch says not configured for it when i intially try and set up retroarch and press to the right. Same version of retroarch as yours too. Does it need to be plugged into usb using wire or does wireless dongke work? Thanks

[@jcsworld69]

Hey Gatsu3D2A, When I modded mine I used a Lenovo Keyboard (Model: SK-8825). It was connected via USB. I modded two different MVC2 cabs with it, and didn’t have any issues.

[@reyvaltierrez9548]

I'm in the same boat tried multiple keyboards no go

[@chrisdavid2408]

there are some steps missing in the beginning when you format the sd then turn off the 1 up, then put the sd in your computer you should say transfer all the retro arch files to the sd. A good you tuber would say see link below for links. the way you said it in the video is as if you are copying the files from 1 up to your PC, and that is not the case. it's completely in reverse. this whole video is out of order. step one. locate the files needed on retro arch. put them on ur PC. then put the SD card in ur 1 up and format. this simple thing will confuse more viewers than it does help. remember people are stupid.

[@jcsworld69]

Appreciate the feedback, always looking for ways to improve the content.