MIATA DIY CANARDS & AERO |

  Рет қаралды 19,482

OMGBUILDS

OMGBUILDS

Күн бұрын

Пікірлер: 57
@arondaughety9800
@arondaughety9800 4 жыл бұрын
On the rear of the sideskirts, I LOVE the forward angle you cut in them! When you look at it from the side of the car, it flows with the rear tire perfectly!
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
I agree
@Thatkswappedek
@Thatkswappedek 4 жыл бұрын
Looks badass
@mrgcc
@mrgcc 4 жыл бұрын
Very cool build. Liking the video quality too mate. Very laid back atmosphere
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
Thanks man
@povilaslondon
@povilaslondon 8 ай бұрын
What is the thickness of the board you used?
@joshparry6123
@joshparry6123 4 жыл бұрын
Love the business card idea!
@ivangabriel3472
@ivangabriel3472 4 жыл бұрын
Cleanest Miata i'v ever see.
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
😀
@hebrews11vs5
@hebrews11vs5 5 ай бұрын
Awesome build. How is the cayman to drive? I only know cayman in gran tourismo but I know miata because I have and had one.
@ferrari430sc100
@ferrari430sc100 3 жыл бұрын
I know you’re not very active in the comments but have you driven high speeds yet and got a feel of how sturdy the splitter and canards are? If I wasn’t going with such elaborate fastening should I use some tie rods on the splitter to be safe? I know the canards and side raisers are 3mm but what thickness do you recommend for the splitter and skirt extensions themselves? Is 4mm sufficient? It’s the only ACM available to me
@AhltoGaming
@AhltoGaming 3 жыл бұрын
Ayyyy, looking up DIY canard videos, and I’m like wait I know this car, I saw you in Anaheim @ Tunerevo!
@sac3152
@sac3152 4 жыл бұрын
The lighting makes the red looks orange sometimes, looks real nice
@brknnecks_e3992
@brknnecks_e3992 4 жыл бұрын
Where can I buy the 3mm panels? Thank you. Omg! I love your rides.
@initialspeed
@initialspeed 4 жыл бұрын
awesome work .....
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
Thanks!
@brknnecks_e3992
@brknnecks_e3992 4 жыл бұрын
Canards look amazing! 🔥🔥🔥🔥😎👌💪🙌
@Di4mondzB055
@Di4mondzB055 4 жыл бұрын
what material are the actual canards?
@qii3565
@qii3565 2 жыл бұрын
Hey brother man! What is the canards made of? any tips and tricks?
@TeslaDIY
@TeslaDIY 4 жыл бұрын
Super clean work as always, did you consider mounting the horizontal side of the long L bracket for the side skirt on the bottom of the side skirt splitter instead? to hide the aluminum bracket from being seen?
@TeslaDIY
@TeslaDIY 4 жыл бұрын
nevermind, just saw the end of your video where you explained how you are fine with some aluminum showing to break up the colors, looks good man!
@ACanadianMonk
@ACanadianMonk 3 жыл бұрын
What an inspiration 😍
@THEsimpleThingsFR
@THEsimpleThingsFR 3 жыл бұрын
What material do you use for the splitter and Canard
@maxyin6817
@maxyin6817 3 жыл бұрын
3MM ACM
@ferrari430sc100
@ferrari430sc100 3 жыл бұрын
What thickness did he use for the splitter and side skirt extensions do you know? 3mm feels really thin for lip and sides… and to me the caymans panels look better and sturdier
@hondapnw1884
@hondapnw1884 3 жыл бұрын
You did a good job for not having machines
@skillaskill14
@skillaskill14 2 жыл бұрын
What material are using to make the aero kit?
@Joe-sb4yp
@Joe-sb4yp 4 жыл бұрын
would've been cool if the canards followed the lines of the rocket bunny splitter. would've looked a little like the rwb porsche canards lol
@gabegabes6419
@gabegabes6419 3 жыл бұрын
@OMGMIATA Where do you buy the bolts and corner edge hardware and small corner brackets?
@dash1939
@dash1939 3 жыл бұрын
where do you buy aluplast I cant find it anywhere
@ferrari430sc100
@ferrari430sc100 3 жыл бұрын
Same lol and when I do find them its only 3mm in tiny sizes
@jasondang1920
@jasondang1920 3 жыл бұрын
Where do you order all your fastener?
@rezzy_ind33d47
@rezzy_ind33d47 4 жыл бұрын
Did those hydron taillights ever get released?
@vally6853
@vally6853 3 жыл бұрын
Can i cut those 90 degree angles by hand?
@eWok313
@eWok313 4 жыл бұрын
What did you use to cut all the brackets and ACM sheets down? Everything looks so clean. Thinking I should invest in whatever tool you used to cut those things.
@eWok313
@eWok313 4 жыл бұрын
For the brackets, I know you mentioned miter saw, but I'm specifically wondering how you got those rounded corners.
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
@@eWok313 see my DIY aero video pop up in the beginning
@mannyhernandez4349
@mannyhernandez4349 4 жыл бұрын
Where did you buy the material for the aero if you don't mind me asking?
@ticvor_visuals
@ticvor_visuals 4 жыл бұрын
f*** brow haha you're so fuc*** crazy dude this car is soooo sick haha good job mate
@DEBrown
@DEBrown 4 жыл бұрын
What material is the canard and side skirts made from?
@shane5001
@shane5001 4 жыл бұрын
Hey do you plan on driving this or are you gonna use this as a paperweight.
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
you're one of those boys who turned in their homework half finished huh?
@shane5001
@shane5001 4 жыл бұрын
@@OMGBUILDS To che, but in all seriousness will you track it eventually?
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
@@shane5001 This is a street car, not a track car.
@shane5001
@shane5001 4 жыл бұрын
@@OMGBUILDS Then what the hell is with the slicks?
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
@@shane5001 I run slicks on my motorcycles for extra fun canyons runs. Figured the miata should have a set 😊
@codyneumann5846
@codyneumann5846 4 жыл бұрын
whats the material you use again? i keep forgetting the name
@otterside1827
@otterside1827 4 жыл бұрын
Aluplast
@daviddwiky169
@daviddwiky169 4 жыл бұрын
can the miata go track day ?
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
Can, but this is a street build.
@chriscole9621
@chriscole9621 4 жыл бұрын
you are feeding airflow into the tire, I'm no aero dynamist but one of the flaws with the Miata is that the tires are exposed to the front of the car which causes a lot of drag your basically feeding air to a wall which will cause turbulence
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
That will be addressed later as this car is only 50% finished
@chriscole9621
@chriscole9621 4 жыл бұрын
@@OMGBUILDS ah ok cool, I have a 91 mercury capri xr2 turbo which was the competitor for the miata and that's one of the reasons I like my car better then the miata is just cuz the miata is literally a bubble lol
@ricoraxelhd
@ricoraxelhd 4 жыл бұрын
Hey man i just love your builds! I'm just curious though since you're putting the v2 spoiler on the car are you gonna end up doing a separate wing sort of like on the cayman?
@OMGBUILDS
@OMGBUILDS 4 жыл бұрын
Nah, no wing for this build
@aquilesbuenrrostro5208
@aquilesbuenrrostro5208 2 жыл бұрын
what material is that tho
Inventor of the Miata Reacts to Tiktok Miatas
17:54
Real Mechanic Stuff
Рет қаралды 9 МЛН
Turbo v Supercharged v ITB: DRAG RACE
12:40
carwow
Рет қаралды 1,8 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
How to make canards - DIY car styling and aerodynamics
10:58
SpyderLEE
Рет қаралды 23 М.
The Science of Splitters & Spats (FM Live)
20:45
Flyin' Miata
Рет қаралды 7 М.
Proven Aero Setup // Miata Track Build
10:45
Napp Motorsports
Рет қаралды 4,8 М.
MAZDA MIATA HOOD DAMPER INSTALL | #OMGMIATA | EP52 | [4K60]
17:56
Forcing The Inventor of the Miata to Drive Modified Miatas
25:17
ROCKET BUNNY MIATA FULL PAINT PROCESS | #OMGMIATA | EP11 | [4K]
34:10
MIATA POP-UP HEADLIGHT APP | #OMGMIATA | EP73 |  [4K60]
22:01
OMGBUILDS
Рет қаралды 51 М.
Home-Built Track Monster Miata: FAST Frankenstein Build!
12:11
Правильный подход к детям
00:18
Beatrise
Рет қаралды 11 МЛН