The Audio Workshop: How to PROPERLY use VOCAL RIDER

*UPDATE all you need to do now is to just Send all your music to the music SC bus (Mute that bus because itll echo) and then just simply slap a vocal rider on the targeted vocal track and then use the key insert to side chain the Music SC easy clap, no need for two vocal riders. ***
Here I show you how to Properly use Waves Vocal Rider.. most people just set it up as an insert and only use the plug in to HALF It's potential.
BLOG : www.masondayotproductions.com
Profesional Mixing and Mastering Services : www.masondayotmixing.com

[@MasonDayot]

**UPDATE all you need to do now is to just Send all your music to the music SC bus (Mute that bus because itll echo) and then just simply slap a vocal rider on the targeted vocal track and then use the key insert to side chain the Music SC* easy clap, no need for two vocal riders. ***

[@jayceonadler8885]

How do I do this in FL?

[@willlove7927]

NOT WORKING FOR ME

[@antgod2724]

Could you do a update tutorial?

[@tomix1970pl1]

I dont have this key on plugin..?

[@urealiknow6060]

and just slapping it on does it..? or you have to write and record it to be fully functional as supposed..?

[@RayoBeatz]

actual video tutorial starts at 6:48 thank me later

[@dannyboycinco]

alvinraydj3 thanks fam

[@bv9434]

Thank you

[@damienparham3979]

LMAO

[@chocolorenzo5158]

Thanks.

[@raulduro809]

I know there would be one of you here, you're a good man.

[@thanoseolios8281]

What a beautiful song and voice! And you sir did a wonderful job so far with it's sound! Thank you for this totally useful tutorial! God bless you man!

[@Pearlpassionstudio]

Outstanding tutorial....explained very well. Thank you..

[@Dustrauma]

Well done sir! Attention to that detail! I like it!

[@KevinKouto]

Vocal rider = Time saver...PERIOD...great video....i just used your technique on my latest track

[@HugoBraham]

This video just made Vocal Rider even better! It rides so freakin' well this way!

[@MasonDayot]

IT was the original purpose!

[@curtismech]

Awesome, thanks! Just bought Vocal Rider and this really helped my understand some aspects of the plugin.

[@MorisoniProductions]

Thanks for a great video, with clear explanations. Much appreciated. And a great track, too!

[@aaronjonesgospel]

excellent tutorial. I just got this plug in yesterday and see a lot of potential!

[@sanrojasv]

Great video! Thanks!

[@roelgarcia]

Thank you for the thorough explanation on using plugin

[@charleshuguley9903]

Thanks. I have not been having great success with this plug-in; now I know why.

[@mikemathieson3700]

Mate i love your tutorial big thanks

[@yodelusional]

Love this. Gonna try it tonight

[@TexasJackdaw]

Excellent video. Thanks for posting!

[@MasonDayot]

+Tim Roberts my Pleasure

[@marcomusictv3854]

Wouuuuu! thank you so very much, I already have Vocal Rider, but have never consider to use it this way, thanks for sharing this advance way to use it more eficently!

[@MasonDayot]

Yeah you can also just slap it on as the final plug in on your chain and still run the side chain just without that second channel in paralel

[@marcomusictv3854]

Mason Dayot great Video Mason! You have a new subscriber!

[@antoniocarlosbarbosa9747]

Awesome program

[@BIGKLEE]

Thank you for your knowledge

[@ksquare81]

Really helpful! Thank you!

[@KevinnR92]

Thanks man! Great tutorial

[@ToastedAndButter]

The way he hits his consonant's jeeeez.

[@thfell3914]

Thanks bro! this helped alot..#missing puzzle piece!

[@sveinunghamre324]

Thanks Mason! :)

[@Singhka8]

Great Video thanks mate!

[@291god]

i have been using vocal rider for years. this guy just added a lot of extra steps that arent needed. if you mix, you already have bus tracks setup for your drums, gtr, hh, and all that. then you would have a summed buss of all the music. once you have that summed buss, just create a send on that summed buss for the s/c on the vocal rider. place the vocal rider directly on your vocal track last in the chain. each vocal track will be different so each vocal rider setting should be different.

[@Pearlpassionstudio]

OK....here's a question. The summed buss is stereo, sending it to VR on that track is to be mono. I don't get it. Does it make a difference instead of sending mono tracks directly to the Lead Vocal vocal rider?

[@291god]

it does not make a difference.

[@Pearlpassionstudio]

Sure makes sense now that I thought about your process. I sure do have bus stems on all instruments. Just sending them to the VR side chain...Bammmm, done. Thanks for the help.

[@stormshadow2k]

Makes total sense, yeah. Thanks.

[@AceAttack]

you're a hero :D

[@kevbomb]

For anyone using Ableton, the sidechain option is not on the Vocal rider window, it's on the ableton box at the bottom left of screen where plugins sit. Took me awhile to notice that

[@carriefingsolomon]

Omg thank you! I wouldn’t have known that

[@ace20019]

Awesome tip.... I will gladly put this to use

[@MasonDayot]

Let me know how it goes!

[@DrayClay]

This helped me so much man thanks.

[@MasonDayot]

+Drashawn Clay I'm glad it did!

[@SmoothSailingMusic]

Love this thank you.

[@MasonDayot]

+SmoothSailingMusic you're welcome!

[@paullekman7690]

Hej new to this plugin. Side chain tip very good.

[@BurntheBreeze1]

Thanks bro!

[@nikolasgudmundsson9995]

Finally, someone explains this well!

[@MasonDayot]

Thanks for watching! Hope it works

[@Critical187]

This is great, what cool way to not have to just automate and mix for hours

[@TwentyFourHourz24]

THANK YOU

[@seand6576]

Thank you very much!!!!!!

[@MasonDayot]

YW!

[@chocolorenzo5158]

Thanks.

[@shanibkvb6872]

love u broooooooooooooooooooooooooooooooooooooooooooo i love u thxxxxxxxx

[@Klangerzeuger]

Thanx, man! I bought Vocalrider 2 days ago and it is already a great help. Thanx for laying out the sidechain thing, saves me a lot of Braingrease! (is that a word in english?) 🧐great timing for me!😊

[@kalliou6up]

4:50 you mixed tf out of that 🔥😭

[@SouthYarraMan]

What a great song to demonstrate this Plugin with. Great arrangement, performance and a dynamite mix. Would like to know how this song was mixed and if compression was used on all instrument tracks because everything is really shining through. If a DAW doesn't have a side chain, is there a work around using the buses or maybe using Vocal Rider on a separate bus in the same way as you would apply parallel compression on drums? I can create as many buses as I need in my DAW though. Thanks and any tips would be really appreciated by all. A quick tip of my own regarding compression -- if you like to use stacked compression, say twice on vocals, then set your second instance of it in the reverse mirror image of the first! That way you will catch both the onset transient, as well as the tailout!

[@shawnalove5050]

Blew my mind! Thanks! Question: Could you explain again how to use the Output fader of the plugin? Why do you have is so low?

[@SupernovaSun77]

This thing is a monster! I use 2 in series like compression. Try that out. Talk about total control.

[@chadb4533]

make a vid!!!

[@mikesparks3398]

great sounding voice!, nice tutorial

[@MasonDayot]

thank you sir. though it IS old..

[@mikesparks3398]

@@MasonDayot great vocal sound, that's something i'm trying to work out right now..that's how i fell across this tutorial!

[@KrakowskiStudio]

Great tutorial, thank you. I have two questions: 1. why do put fader of the VR to -12db? 2. would you use VR write option to record the automation, to, then, adjust it manually if needs be?

[@BenD3333]

Might be worth mentioning that you're effectively parallel processing the lead vocals here, by sending post-fader to the "Lead VR" buss as well as to "MIXBUSS" from the initial channel. That is, unless I've missed something here haha! Looks like I'll need to take a look at this plugin soon; could be a real time saver! :)

[@MasonDayot]

+Ben Davies Music definitely take a look man!

[@polocorni]

congrats on this tutorial! it really helped me understand certain aspects of the vocal rider use. my question is: In case i wanna use both the Vocal rider technique you demonstrate as well as the Rear bus technique (aka Parallel Compression on the whole mix, watch?v=R0l3XAli6Zg) , how is it possible for them to be combined?

[@laughingboy-tk6ut]

Cheers man.

[@MasonDayot]

+laughingboy9000 cheers

[@Echomanrecords]

Awesome

[@MasonDayot]

Thanks!

[@rse2934]

Thanks yo

[@smarthalayla1549]

Cool video. So can it be used as am automatic volume slider for a full stereo mix also without having compression or limiting effects? And what if its used for music with a very low and very high volume changes? I'm talking about using it with a stereo after wave mix and no effecting a vocal track.

[@lane1959]

I need you to show me where the outputs of these Side chains go, maybe even a template of of what you did in the video!

[@nlrstudios7476]

Do you have to bounce the song down in real time so that it plays out loud for the vocal rider to work? (I'm using logic pro) or can you bounce it down offline so that it goes faster, but the vocal rider will still work? also if I wanted to vocal ride multiple tracks at once how could I do that?

[@lambadalasse]

Great info. I cant get totally clear on whether VR ALWAYS should be the last insert or whether it can give a relief on compressors pleaced after VR.

[@MasonDayot]

It depends if you want it to help control how hard the compressors have to work, or you can place it after to do fine tuning on the dynamics

[@picardster]

Did you use VR here both as Insert and on the SC?

[@SnowAngelfish]

I think its best to create a dedicated bus just for sc to VR. The bus can then have just the tracks required to trigger VR. For example you may not want kick and snare spikes constantly triggering the VR. Also Im not sure how good the VR is at catching real fast transients on voice,, i have not deeply tested it yet,, but to be safe you can set the compressor before VR to control these.

[@ximehtnijr]

Thank you! What about the vocal dial? When do we use that one? Thank you.

[@undergroundmixtapes3037]

Can i use it on a bounced instrumental like stereo track? Or jus send every instrument stem to the vocal rider aux?

[@aaronmondo4681]

Thank You so much!! I have had this plugin for ever, and I had pretty much written it off until I watched this. Great Job!

[@MasonDayot]

+Aaron Mondo I haven't ridden a vocal since haha

[@MarioRoqueSanRoque]

What is the name of the artist and the music? Amazing tutorial. Thanks! Best

[@finnesszdol0]

Whats the shortest way to use this plug in properly like u have in this video

[@RyanMartinMusic]

Are all the vocals on 1 track? For example double and harmonies et?

[@roedellsimmons9427]

Do you still have individual busses for your music and drums?

[@officialsixstrings]

what recording chain you are using ?

[@ut1004bp]

I'm thinking placing a glue compressor set about 50%, just in before the vocal rider would help the Rider get is job done with less late or over-shot errors(?)

[@tombadgerlock1055]

Is it somehow possible to do this in Ableton?

[@philfyphil]

I tend to leave some drums, percussive and other spikey transients out of the side chain so that vocal rider is oblivious to them. I find you get better and more even results, especially if the transients are very prominent and occasional in the mix. Glorious voice by the way.

[@MasonDayot]

+Philfy Phil hmm good idea I should try it

[@killsplaque]

Yep, for sure. Don't want snare drum spikes to cause the vocals to come up.

[@metalion667]

I use the write automation function aswell, then if there is any problems you can still just do some small changes on your main vocal volume automation afterwards. Shouldn't be confused with compression though, 2 different things, compression changes the shape of the waveform due to attack/release/knee settings whereas rider just changes the volume. I tend to compress first then use the rider, then automate volume for sweeping dynamics ie big choruses. Works bloody brilliantly.

[@Pearlpassionstudio]

I agree, new at this VR. Question...once you automate the vocal track, do you bypass the Vocal rider and the sends to it? Commit the track to save CPU? Thanks

[@metalion667]

once its written the automation i usually just switch it over to read, you could remove the sends to it if you wanted as its not listening to them anymore its just following its own written automation. If youve set it up right the vocal should have a fairly even level throughout the song, sometimes too even so I then go in and either adjust its own automation curves or write a new one using the main track volume, ie re adding dynamics like quiet verses, louder choruses. I dont usually commit to track until im totally happy, from memory the rider is quite a low cpu consumer. The other day I tried it out on a overheads track that kept disappearing in loud parts of the song and it worked great, im sure Ill try it on other sources in the future, its a great tool.

[@Pearlpassionstudio]

Explained well, thanks for taking the time getting back with this response. I did do the commit after liking my end result. Now it all makes sense. Cheers

[@toddamarino]

Hello! Thank you so much for posting this. I have the plugin and I've was using it incorrectly by just putting it on the vocal track. It does help a lot that way but your way is MUCH better. A quick question for you... How come you setup the track in Mono instead of Stereo? Can't you just make it a stereo track? Many thanks! Todd

[@ShalowRecord]

If you look closely he does have one VR on the lead vocal directly too

[@praymetri]

would this work if I was using a 2 track ?

[@TonyOliveiramusic]

Hi thanks for the video. Question. Why do you open another aux channel just for the lead vocal rider as opposed to just using the actual channel where the vocal is to begin with? You could still route all the instrumental to the side chain that way and it would ride the volume on the channel where the vocal is. I don’t understand why you did that. What am I missing here?

[@klassenjimmy99]

Your not missing anything that was driving me nuts and he finally said you can do that.

[@jonq8714]

I can't get this to work properly, it's frustrating as hell. The initial attack of my loud parts are still quite loud and some of the quieter parts just don't seem to recover quickly enough for some lines...

[@johnnyroc]

My plugin doesn't have the key so can't sidechain. Using Ableton 8 / mac

[@DLithic]

doesnt work with reaper? won't detect any sidechain 'key' , i believe. help!! thanks.

[@chrisogle001]

What song in this? Who is the artist and song name? Great song.

[@SouthYarraMan]

What a great song and great mix, is this someone you recorded? I don't have a side-chain possibility in my DAW, so is there a work around?

[@killsplaque]

Get Reaper. It's $60.00 and great. :)

[@codyboi022]

I never understood why I couldn't get the 'Music' feature of this plugin to work. Thanks a bunch! This is golden.

[@MasonDayot]

No Problem!

[@theshoprecordingstudio7308]

HAHAHAHA! I was gonna make the same statement but feared the horrible backlash

[@manesaamusic9927]

SAME HERE@@theshoprecordingstudio7308

[@TheDrCano]

Hi Mason, thanks for the tutorial! I have a question. Why can't you send the music to a bus and simply SC that one bus with the VR instead of having the SC on every track except the vocals? Thanks again.

[@MasonDayot]

Well, where are you getting the music from? A stereo bus that has all of the music elements only? With that in mind, you have to send ONLY the music elements that you want. You can even pick and choose which elements you want to send (BGVs for instance)

[@roeilevi4594]

why does this trick makes my mix buss right channel so loud its clipping????

[@robertparis100]

Why the little meter or beside the plug-in on the insert

[@marcsee4072]

Hi a big question. I have a project and there is a vocal level problem. There several tracks and each track has different level problems- louder quieter. I tried this plugin and it works perfectly for each track but then the vocal level is different between the tracks. Is there some limiting option to bring / reduce everything up to 0db with some dynamic variations? This is death metal project so it gotta be all loud and legible. Cheers

[@MasonDayot]

That's where you have to do your initial balancing first with compression first. and then use Vocal Rider to rider the music rather than the vocal itself, if that makes sense.

[@PrlmNT21]

wouldn’t it be less cpu intensive if you just send the musical elements busses to the Music SC??

[@deanc2000]

how would you set it up in Reason 10?

[@EddieSlowhands]

HI THERE MASON. EDDIE IN THE UK HERE. THANKS FOR SUCH A GREAT VIDEO - REALLY HELPFUL BUT......................... I'VE TRIED THIS BUT WHATEVER TYPE OF AUX CHANNEL I CREATE AND SEND ALL THE MUSIC TO IT - IF I TURN THE FADER DOWN OR MUTE AS YOU SUGGEST THE MUSIC IS TURNED DOWN OR MUTED. I'M USING STUDIO ONE ARTIST 5.4 SO CAN YOU PLEASE TEL ME HOW TO ACHIEVE THIS IN MY DAW ? I HAVE 3 CHANNEL OPTIONS - BUS - AUX OR VCA. I'VE TRIED ALL 3 BUT IT DOES THE SAME ! HELP ! ! ! BEST REGARDS - EDDIE.

[@HSet77]

I wish waves would not use tiny green indicator lights on their plugins - myself - and many other male users - will have trouble making out the subtle changes - due to red/green color weakness combined with that small size of the indicator. Choose Blue/yellow - shades of grey - or make it larger.

[@xJoacoARMx]

When I set the vocal rider on the aux input, TARGET it is always full with yellow and the output appears on 104.0 and it does not work with that, I set the output on -12 but with the full TARGET, it just makes the voice sounds louder, nothing else... can u help me?

[@MasonDayot]

+TxExRxRxAxN hmm not sure, maybe someone else can help you on here!

[@marcushobbs8639]

Hi Mason, Thanks for this extra tip. So just to clarify which you may have a number of times already. You're using the vocal rider already on the channel strip LV as a transparent compressor. THEN you're using an AUX to then ride the compressed signal (also using vocal rider and CLA-2A) against the music? Is there a big difference between this and sidechaining within the LV strip? Thanks

[@MasonDayot]

+Marcus Hobbs as an update an easier way to do this is just to send it to the side Jain then put the vocal rider on your vocal track instead.it will still ride the music while receiving from the sidechain

[@Yabletttt00]

Ahh right that's how I had been doing it originally but thought you were running it parallel for some reason. Carry on!

[@nlrstudios7476]

also, so you keep vr on the actual track as well as the aux channel? so it's on both?

[@killsplaque]

One to control the vocals, like a transparent compressor, then the other one is to ride the vocal on top of the music.

[@rikgreen520]

Hey man, I don't use pro tools.....I'm using reaper, so I don't have the key insert, do you know how I can do what you have done in pro tools, but in reaper.? Thanks.

[@MasonDayot]

Not sure. I haven’t really used reaper

[@disengagetattoos5074]

Dont forget to volume match all your sends. "Alt + ctrl + H" after selecting the sending tracks.

[@higrlz]

What's the song? Who's the artist?

[@mauricerobinson9560]

great mix I study panning eq an compression every day but can get everything clear an sheen even when using excitor. mix still dull do you give mixing lesson

[@MasonDayot]

+Maurice Robinson I do overviews of my mixes every other week

[@michaelarthurmusic307]

You might want to read the vocal rider manual, then re-do some sections of this video...

[@robe.739]

Who is your vocalist. She is fantastic

[@sejuyz]

can´t access your website

[@GammelfarMusik]

Great tutorial. Won't it be easier to just put Vocal Rider directly on the vocal track and still sidechain the music? Until now, I've just been using it as a stand alone plugin to even out the vocal track. Gonna check out the sidechaining now. :-)

[@MasonDayot]

+Mikkel Tiedt Musik I actually do that now and can confirm it works

[@GammelfarMusik]

Of course it makes sense, if you have a mix of several vocal tracks you need to flow on top of the mix :-)

[@asdfdsa16]

somehow i still didn´t get why you cant assign that MUSIC SC track to Rider thats on vocal track and Rider itself has to be on bus? and doubleing the Q already here, why mono? is´int there any audio going thru?

[@MasonDayot]

I suppose you could do that.. As long as you have the music SC active with music sent to it, and that it side chains to the rider then you're fine. It's mono because the vocal is mono. Not a stereo track. But you can still do stereo if you want.. You're just trying to get a music signal in anyway.. This is just how I do it.

[@modugnoguitars]

Anyone know the name of the song?

[@nickolasolsen8029]

Basically you're creating a "double" or "parallel" vocal track with the rider on it, side-chained by the music? It sounds good on the track I just used it on. Thank you! Just seen your update in the description. What is the Leader Rider?

[@MasonDayot]

The lead rider is for the lead vocal, and a other rider is for BGVs

[@theshoprecordingstudio7308]

Thanks Man. Great Tutorial!

[@MasonDayot]

+The SHOP - Rehearsal & Recording Studio thanks!