Massey Ferguson 2860M Power Shuttle Platform Compact Tractor

[@HerkCC]

I've never seen a shuttle shift work lime that? That is definitely the quietest 60 HP tractor operation I've seen.

[@VahrenbergImplement]

That is How the Power Shuttle (Hydraulic Shuttle) operates it been used on larger tractors for many, many years all the way up to the 8740S (400 Engine HP) has Power Shuttle. Yes that is super quiet tractor. One of the advantages of ISEKI Engine.

[@donaldstrishock3923]

Massey-Ferguson tractors keep getting better and better. They are just leaveing all others in the dust. My baby 1736 power-shuttle is a real "Master Piece" of a real tractor. Have to get one of these 2860m's soon! Great vidio---keep them comming!

[@VahrenbergImplement]

Yes that 1736 Premium is a Real Master Piece....and Massey Ferguson is continuing to listen to their customers and owners and evolving from their suggestions. So glad Massey Ferguson keeps making better tractors than others than figuring our ways to cut corners and make them cheaper and cheaper.

[@jasonduck9444]

Which kubota tractor would this compare to? Maybe a mx 5400? Trying to decide between kubota and massey. Thanks for the videos

[@VahrenbergImplement]

2800M Series are the Premium Full Featured Tractors from Massey Ferguson. I think that is the Grand L Series from Kubota. The MX Series is like the 2800E Series from Massey Ferguson.

[@drobb4207]

Great video and tractors! Can these tier 4/5 tractors burn off road diesel? I hope that is not a dumb question.

[@VahrenbergImplement]

On Road and Off Road Diesel are the Same. Off Road Diesel is dyed Red because you are not paying the Road Taxes and the dye will stay in fuel for long time and can be checked by Fuel Inspectors if you try to use Off Road Diesel, On Road without paying the taxes.

[@allenclor2910]

i was wondering if the tractor is a power shuttle do, or do you not have to use the foot clucth

[@VahrenbergImplement]

The Power Shuttle is a Hydraulic Controlled Shuttle and does not require use of the clutch to change directions. It does require clutch to change the Gears and Ranges. Gears can be done on the go as they are synchronized but range shift must come to stop to change ranges.

[@allenclor2910]

@@VahrenbergImplement I would like to get a 2860 and i talked to four dealers and they all tell they cant seem to get them in.

[@VahrenbergImplement]

Prebooking an incoming order is the Smart Way to Buy with the Huge increases in Demand of Products happening now. Visit your local dealer sit down and spec out the tractor exactly how you want it and complete a Retail Order and it will lock in Prices and Programs for Future Order Coming in. Massey Ferguson is prioritizing orders coming in to fill retail sold orders first and then ship stock orders. That why your not going to find one in stock...we have 2 of this same model presold to our customers just waiting for the orders to arrive and they will be enjoying their new tractors soon! Here is vide we did on this Great Demand: kzbin.info/www/bejne/bHfOnKOClK-Sgs0

[@jefferykessler3707]

Is there any way you could do a 2800e and a 2800m side by side comparison?

[@VahrenbergImplement]

Right now we don't have enough inventory with the equipment shortages. But we did one a while back that covers the basic differences: kzbin.info/www/bejne/q5WldWWuo9KYiJY

[@danielsnyder2288]

Would a 2860 cab with loader be able to carry and load/unload 1500lb round bales? Can carry 1 in front 1 on back on relatively flat ground?

[@VahrenbergImplement]

We have several customers using their 2860M for that, maybe even heavier bales and some on uneven terrain.

[@danielsnyder2288]

@@VahrenbergImplement Thanks

[@houndsmanone4563]

Love the Massey. I purchased the 1760M but prior to purchase, check out a 2860M to compare specs. The 2860M is heavier and a tad longer than the 1760 so I opted for the 1760 just to have a slightly lighter weight than the 2860M. One thing I like about the 2860 is the Cat 1 and Cat 2 ball size on the 3 point hitch lift arms. The 1760M does not have that. Is that something I can purchase from Massey and switch over? Can I get the 2860M lower lift arms and put on the 1760M? Thanks Doug. Love your videos. 👍🏽🙂

[@VahrenbergImplement]

You have eHydro or PowerShuttle? Platform or Cab? The Powershuttle Versions have been larger than the eHydro Models even on previous generations 1759 Premium, 1760M and the 2860M. I can look up arms to see if interchangeable on www.AGCOPartsBooks.com but need to know which version.

[@houndsmanone4563]

@@VahrenbergImplement I have the 1760M Powershuttle.

[@VahrenbergImplement]

I just looked and the same arm is used on both the 1760M and 2860M so you should be able to purchase just the sliding telescopic ball end of the arm and upgrade to the new Cat1/2 Ball Ends of the 2860M. Price is approximately $130.00 each for the link ends.

[@houndsmanone4563]

@@VahrenbergImplement Thanks, I'm on it. 👍🏽🙂

[@Moorslayer1]

Can someone tell me what the OS with loader and shuttle shift 2860M sells for?

[@subcompacttractorstuff4053]

Will this bucket fit a gc1710? Great video thanks for sharing!

[@VahrenbergImplement]

The Grapple or 72" Skid Steer Bucket shown in the video? Can you help explain more what you are looking answers for???

[@chadlowther7889]

What size plows can 2860M pull?

[@VahrenbergImplement]

There are Lots of Variables that effect Plowing. Biggest is on How Deep and What Type of Soil you are plowing. Tire Type and Wheel Spacing: Ag versus R4 or Turf, and are you setting spacing to get in the tire in the furrow. Ask our resident Oliver Plowing Expert he said a 2 Bottom 16" for that tractor would get more done that 3 Bottom but in loose and easy pulling soils possibly 3 bottom. Too Many Variables to fit all the numerous soil conditions, tractor settings and then plow types...some plows pull easier than other brands.

[@musicgroopie1]

What's the base weight without loader. I need to push pull and dig, so I need a heavy tractor.

[@VahrenbergImplement]

Cab or Platform Version? If you need heavy tractor check out the 2600H Series. They have lots of cast iron and heavier but only Platform Models.

[@miker5140]

I could use one of those Mf 2860 M open station Loaded chassis options

[@VahrenbergImplement]

Get with your Local Massey Ferguson Dealer they can make that happen. If you need help finding yours here is Dealer Locator: www.masseyferguson.com/en_us.html#dealer-locator

[@diegoranchinc5389]

How big of a brush hog can you run on the 2860M ?

[@VahrenbergImplement]

You could run a RhinoAG TS12 Flex Wing Cutter (12' Cut) behind the 2860M it only needs 35 PTO HP to run that Rotary Cutter.

[@diegoranchinc5389]

@@VahrenbergImplement Thank you so much sir. I'm guessing the 15ft would be just a little to much for it. 3ft makes a big difference taking care of 160 acres

[@VahrenbergImplement]

You need more PTO HP for 15' Cutters. Minimum to run the machine on flat dry ground is 50 PTO HP most customers around here are running 100Engine/80 PTO HP Minimum. You have to add HP for hills and soft ground and other factors. I wouldn't sell a 2860M for a 15' Cutter...customer ain't going to be happy.

[@diegoranchinc5389]

@@VahrenbergImplement Makes perfect sense. Thanks so much for taking your time to answer my questions.

[@ranchhandrandy3213]

What's the current price?

[@VahrenbergImplement]

Programs and Pricing is still changes and also with features you want. Recommend contacting local dealer for current programs: cash Rebates or Low Rate Financing Prices. Current (4/24/23) List Price for Base Machine 2860M Powershuttle with Loader $48,644.07 Program will lower that several thousand.

[@raypichette586]

I got mine now great machine and not for sale!

[@VahrenbergImplement]

LOL...I thought everything was for sale.... That's an awesome statement. Everyone we have sold absolutely loves them!

[@311hitwall]

For the money they cost should have 2 rear remotes standard. Dang tree huggers making everything more expensive and more to tear up.

[@VahrenbergImplement]

But not everyone needs them so why raise the price of the tractor even higher for those that don't need them ??? Actually the new 2800M series seen a price decrease over the previous 2700M when introduced. A large part of that was the engine and emission cost savings going back to ISEKI Engine versus Shibaura. ISEKI builds the complete powertrain and assembles the tractors for Massey Ferguson. So it made it lower cost, using one supplier.

[@311hitwall]

@@VahrenbergImplement Doesn't the cab version come with one remote standard? I know they don't offer hydro on these, but wouldn't people use the loader as much on these as they do on a smaller tractor? Why is it that most larger tractors are power shuttle?

[@VahrenbergImplement]

Cab Model offers one Rear Remote as Standard Equipment. And can Dealer install up to 3 on Cab and Non-Cab Models. So those that want them can get them. Dealer can install them for you. You can get eHydro in the Cab 2860M. Here is video we did on it: kzbin.info/www/bejne/ipavkmWAp6-KhLM Hydrostat Transmission use more Engine HP and the larger the tractor the more it needs. So 60 Engine HP is about the Max that manufacturers use because of the inefficiency of the transmission. Massey Ferguson DynaVT starts at 140 Engine HP and this AGCO CVT Transmission from Fendt provides the most efficient HP to ground and "feels" like a hydro and has infinite speeds from 60 feet per hour to 33mph. That is the Transmission for variable speed and big horsepower.

[@311hitwall]

@@VahrenbergImplement It is kind of odd that Massey would offer a hydrostat on the cab model. Are the users that different between the cab and open models? Which one typically has the most issues between the hydro and the shuttle?

[@311hitwall]

@@VahrenbergImplement What size are the r4 front tires?

[@welcometothefreeworld]

Well, Doug. I am ready to trade my orange tractor for one of these. ...just need to have an excuse to drive to Missouri with a trailer instead of flying.

[@VahrenbergImplement]

I'll find you a better deal. I bet I can find a dealer that will trade you out in Georgia. How's it going ol' buddy? Rent one of those cargo planes and we can fill it up! See you can fly and trade in Missouri. LOL