Massey Ferguson 35 Power Steering Assist Conversion.
Пікірлер: 102
@DriveShaftDrew6 жыл бұрын
I JUST HEARD THE NEWS RIP BUDDY PRAYERS ARE WITH YOU AND YOURS
@Maranatha146 жыл бұрын
Well done gentlemen with your awesome video.
@brianmarshall16379 ай бұрын
Five years ago a friend and myself fitted a power assisted starting to my Massey Fergus 165mark one,it was relatively simple to fit and was a real treat to drive,indeed I could not have driven without as I have arthritis in the shoulders.
@TheShadeTreeFixitMan4 жыл бұрын
Now that I have a MF 35 I will be referencing these videos for more information. Thanks
@1968hambone7 жыл бұрын
Well done guys, you're gonna have the Rolls Royce of tractors if ya keep it up!
@Fixinthatupvideos7 жыл бұрын
lolllll Yeah i Hope - Thank ya my Man
@txsviking7 жыл бұрын
Nice work! I don't know how I missed this video earlier 🤦
@Fixinthatupvideos7 жыл бұрын
Thanks Terry
@MrVaderino6 жыл бұрын
Amazing! Thanks for sharing..
@andredupuis90034 жыл бұрын
You do a very nice job thanks
@kapilchoudhary55226 жыл бұрын
Awesome job guys
@donaldthomas58523 жыл бұрын
Thanks for the video. My brother has Parkinson's and because of it he is no longer able to drive his 35 Massey Ferguson because it has no power steering. He was talking about getting a different tractor with power steering. Maybe he will watch this video and just put power steering on his old.35 Massey Ferguson he has own it since 2004.
@ckbne5 жыл бұрын
Great job guys
@cigarcaptain7 жыл бұрын
that was quite a project. Nothing just bolts on and works. Lucky you were able to get a welder out to your place! hehehehe
@Fixinthatupvideos7 жыл бұрын
it was a job spread out several weeks - them good welders are hard to find - Jim's getting there - it wouldn't stop raining here
@TheBinaryViking3 жыл бұрын
Would you be able to tell me what size and type those Hydraulic adapters are on that high pressure hose? I have a 68 Massey and I need to replace a power steering hose. My power steering pump is just like the one you have.
@moto4tg2 жыл бұрын
Is this a purchased kit? Or did you build it. With all the cutting and bending on the center link i was curious. Its awesome no the less. I have a massy 65 diesel id like to convert
@jojoskunk5 жыл бұрын
could you have inverte the 2 brackets, right one to the left and the left one to the right so the transversal shaft be in font of the axel and closer to the radiator instead. and have the cylinder on the right side near the pump
@BuckHunterNb4 жыл бұрын
Did you ever try a loader like an Allied 300 on it with your new power assist added.
@harjotpandher41595 жыл бұрын
what was the name of this part which was under the altinator
@stevefuller17793 жыл бұрын
Fitted a similar system to a 135 about 30 years ago, the geometry was totally wrong,Ispent hours trying to modify it but ended up binning the whole thing.
@kennethhumphries29304 жыл бұрын
Noticed the spinouts on the back. Let's widen out all four wheels and do some bush hogging. How will that affect the toe out?
@JoshKilen6 жыл бұрын
very nice job.
@RustyGlovebox7 жыл бұрын
That power assist is going to make all the difference.
@Fixinthatupvideos7 жыл бұрын
it sure will i need to get more spoiled
@khalidmasihmatwo41666 жыл бұрын
Verry Good brother
@user-ji8xu3kw2c Жыл бұрын
What kit did you use for the power steering
@megadwood183 жыл бұрын
if you turned the right side knuckle inward instead out ward you may not had to cut an lengthen the connecting rod
@MrStarlin516 жыл бұрын
Will that kit work on Ford 8n ??
@scothubbard5323 Жыл бұрын
Who makes this kit? Do they make a kit for a Massey Furgeson 65? Can you add power steering assist to a 65 the same way?
@sundaramarockiarajs09186 жыл бұрын
Super bro
@happycampersminnesota75263 жыл бұрын
Where did you get the kit?
@FordsonMajor6D Жыл бұрын
would it also fit on a Fordson Dexta?
@dawinner7772 жыл бұрын
Where did you get the conversion kit? How much
@vishvajitsinhparmar73383 жыл бұрын
Hello this is possible to mount in Ferguson 35 tractors
@davebrittain92162 жыл бұрын
For the relatively small amount of work to install the kit it saves you so much work just steering the tractor for the rest of your life. It's a good trade off!
@greghayes7890 Жыл бұрын
Where do u get the kit
@davebrittain9216 Жыл бұрын
@@greghayes7890 They have them on Amazon.
@udizzy19697 жыл бұрын
Now maybe he can get some work done. lol Miss you brother, Cheers Dizzy.
@Fixinthatupvideos7 жыл бұрын
I'm making my way over there bro - been hiding on faceboob
@iqbaldhillon32525 жыл бұрын
Good job
@mallu87535 жыл бұрын
Steering outing look pliz
@MissouriOldTimer7 жыл бұрын
that'll make driving that tractor much easier,, I used one of those 35's way back when I was a kid, bush hogging and spraying sprouts for a guy.
@Fixinthatupvideos7 жыл бұрын
I Hope it's easy as Pie and then somebody brings me some pie also
@technicalkeshavpari96905 жыл бұрын
this power steering kit price
@greghayes7890 Жыл бұрын
Where did u get the kit
@vishvajitsinhparmar73383 жыл бұрын
I waann to install the kit
@meshalalzahrani95076 жыл бұрын
R.I.P Stan Cruce ... just see the video from George "the shade tree fix it man" .... my sympathies to all his family
@selmirikanovic6 жыл бұрын
Hello! Is it possible to mount this kit on MF 155? I think that all parts would fit or could be fitted, i am only concered about the steering pump.
@Fixinthatupvideos6 жыл бұрын
Hi there, I have no idea? it works great on this 35 though! Sorry couldn't be of more help....
@selmirikanovic6 жыл бұрын
FixinThatUp Thank you mate.I am thinking about using this pump but without gear,i would replace it with belt wheel and make mount for it so that main belt,the one that drives fan and water pump,would drive steering pump too.I have made one modification like that already on my IMT539,check video on my channel.Best of luck!
@kurgan3227 жыл бұрын
Good project! Now it won't tire a man out trying to turn it.
@Fixinthatupvideos7 жыл бұрын
Dang Right been wanting to use it the Lazy Way cause I'm gettin so Lazy lol
@ExploringCabinsandMines5 жыл бұрын
Run that exhaust straight up, we caught our hay on fire once.
@bobjones11313 жыл бұрын
Nope, you will knock it off going through the trees. Got to use it like you need it.
@jimmymcjimmyvich90523 жыл бұрын
You might start a fire in a tree then)))
@festuskingoto23413 жыл бұрын
good job
@coburnlowman7 жыл бұрын
Where did you get this kit? After watching again I see this Ferguson is made near the same as the Fordson Dexta and I bet I could make this kit work on it.
@Fixinthatupvideos7 жыл бұрын
this kit came from england - Acorn Services Tractor Parts
@vikyviky70274 жыл бұрын
@@Fixinthatupvideos ok price plz
@SlickTrickRC6 жыл бұрын
I'm so sry to hear about your family's loss. My prayers for all of you go to our Lord Christ Jesus. God bless you all 💗🙏💗
@tridbant3 жыл бұрын
Seen this video a few times and have enjoyed it. Thinking about it I would have got a new connecting arm made up by a blacksmith. After all it is only agricultural engineering.
@k100patel5 жыл бұрын
what is the prise bro this all subject
@MatHelm5 жыл бұрын
Now do something about the clutch pedal burning up my knee... ;p
@johnt72323 жыл бұрын
I reckon you should have oscillated the front axle before welding up
@kreshnkantkumar25322 жыл бұрын
Pressure steering ka cylinder kahan per milega
@coburnlowman7 жыл бұрын
I have a Diesel Ford 3000 with manual steering. Also a Fordson Dexta that is about the same as your MFer 35 I assume they both share the same Perkins diesel engine. Anyway the Dexta is bad enough that I wish it had a kit but the 3000 absolutely needs power steering. The 3000 my dad has , has factory power steering with 2 or one cylinder on each side and it uses the double pitman with out a front draglink. That is a LUVLEE setup from Ford factory. The MF's also had the same setup from factory. The only kit I can find has the add on one sided cylinder with a really Gawdy draglink that goes under the engine instead of how you fellers done it. From pictures the drag link is half way to the ground from the axle. Not that I abuse my equipment but I could see that stupid drag ling shaped like a horseshoe wrapped around a stump. I know I would because a short time back I drove around the barn and had forgotten I'd set a 4x4 transfer case down and wrapped my truck draglink around that thing. I'm glad you folks were able to run that one above the front axle support. I think this 3000 just has too much going on to run it through there. I do have an acetalyne torch handy tho. I have it all figured out now. The sky is the limit if I go over the hood. It'll look like an angles halo😁😂😄
@Fixinthatupvideos7 жыл бұрын
good luck
@kushwaha-8695 жыл бұрын
Power steering ki Kitni price hai bhai
@jayrhoads31475 жыл бұрын
I would have kept the right side the way it was and eliminate the crossbar tie rod going in front of the engine. It would have put a little more pressure on the steering box but would have kept the tractor the same as was intended.
@raanarana33056 жыл бұрын
In India here is more easy n good looking power stering n easliy can install by our mechanics.
@Isaacson46 жыл бұрын
Is this a kit, or did you cobble parts and pieces together? How about part numbers? This is an excellent vid, and now I MUST convert my MF TO35. The wife won't be happy, lol.
@Fixinthatupvideos6 жыл бұрын
It was a kit, not sure about purchase place tho....it was online that much I can remember...
@ChristianAycock6 жыл бұрын
Really want to see an update on the tractor. Did it affect the turning radias?
@Fixinthatupvideos6 жыл бұрын
It did, I'd say it minus'd 20 % on the left and about the same maybe a little more on the right but all in all it is well worth it!
@ChristianAycock6 жыл бұрын
FixinThatUp glad it worked out tho! We have a ford 6600 and a 2600. Both have power steering but the 2600 leaks the fluid when it runs out it makes the driving rougher.
@shawnmrfixitlee64787 жыл бұрын
Great vid guys , ENJOYED ! I learned how to drive on one of those 35's ..LOL!! Hey I have new vids for ya to check out .. Thumbs up
@Fixinthatupvideos7 жыл бұрын
I'm working my way over there Shawn - way behind - lot of stuff going on here
@shawnmrfixitlee64787 жыл бұрын
Ah , thanks man .. !
@davidfranklin52703 жыл бұрын
Why not use the Jackson Power Steering system. Simply bolt the cylinder to the radius rod and clamp a bracket on the drag rod. Then you can use the original drag links, pitman arms and gear box to provide steering without install new spindle arms or tie rod. Simply remove the steering column and shaft and bolt a new steering control module with steering wheel on to the same flange as the steering column. This will allow the wheels to be adjusted in or out for various widths (row cropping) without modifiying the tie rod. It also does not change the tractor and allows the parts to be reinstalled for restoration if desired.
@franklinmann2905 Жыл бұрын
I'm putting hydraulic steering on my massey 85 gas job. Put a ford front end loader on it now can't steer it. Goin all hydrolic.
@perumala90652 жыл бұрын
How much
@shidappapujari98943 жыл бұрын
🙏👍
@funzone47363 жыл бұрын
Total cost
@serdalkonakc47874 жыл бұрын
Anadolu made in TÜRKİYE good...
@jothiboss34653 жыл бұрын
Price
@sundaramarockiarajs09186 жыл бұрын
My tractor change to power steering
@ajaypalfilmstudio62244 жыл бұрын
कितना खर्चा है इस सिस्टम में
@raanarana33056 жыл бұрын
Plz visit India n look how mechanics install pwerstering in non pwrstrng tractor
@Fixinthatupvideos6 жыл бұрын
Yea I wouldnt mind looking at that!
@upendranaidu50175 жыл бұрын
Turning made easier
@fionaeller78093 жыл бұрын
Oh , Gott ? !
@ExploringCabinsandMines3 жыл бұрын
Can
@dominpakam81783 жыл бұрын
Very dark video
@ibrahimozkurt15702 жыл бұрын
part from turkey
@AmitGhangas076 жыл бұрын
Leave it,purchase new one with advanced technology.