135 Massey Ferguson power steering

I touch on the issues I ran across when I rebuilt this unit. I did not video the assembly process.
the noise you here in the video was the pump vibrating on the parts cleaner. FYI it is a very costly repair to have the power steering on this tractor.

[@BundyBearsShed]

G Day Jerry, It has been a long process for you. I know what you are saying with the aftermarket parts at times, I have not worked on that setup as we didnt get it over here but it looks like you will get a long service period out of it now.

[@timduthie6399]

My MF 135 power steering is leaking as well, but my one is made in the UK so it is not quite the same as yours. ( I am in New Zealand ) I think the 230 has the same pump.

[@lindacook891]

Which oil did you use to fill the pump with? I just picked up a 1975 135 with factory power steering.

[@jerrymoore7669]

The massey spec is m1129a oil or equivalent. It is the same oil used in the transmission for the hydraulics.

[@user-sp7uz3dl4p]

Hello im looking for Massey Ferguson 35 power steering assembly does anyone sell this part or maybe someone send me a link from a website that sells this?

[@rickieclark6777]

I can not find the rebuild kit for my 135 steering.can you send me information on where to get and part numbers would be good.

[@jerrymoore7669]

There is not a complete kit persay for power steering equipped tractors like mine. I sourced the parts from massey ferguson, yesterdays tractors, walts tractors, sparex, and some other online places. I bought a parts book and service manual on ebay. If your tractor has the manual steering there are kits available for that. Check out bundy bears shed on you tube. He has a restoration series on the 135, his has the manual gear box on it.

[@44place85]

Hi, where do you check the gear oil level?

[@jerrymoore7669]

The I&T SHOP MANUAL says to Take the top bolt out of the left side sector gear cap. Mine held almost a quart of sae 90 gear oil when empty. The factory manual says to pack it with grease. Yours could have either in it.

[@44place85]

@@jerrymoore7669 thank you do you fill it from the same spot?

[@jerrymoore7669]

@@44place85 you can or take the vent plug out from the top and fill it till it runs out the side.

[@44place85]

@@jerrymoore7669 thanks

[@joeyharris8268]

Would you be interested in doing mine? It seems to be a rare option... I'm in Florida

[@jerrymoore7669]

I still have an issue with mine. I haven't taken the time to go back in it. In hind sight I should have put a manual gear box on it. Would have been cheaper that way. I live in Oklahoma.

[@jamescooper7404]

My 135 74 model is leaking fluid out of vent on top of steering box there shouldnt be P S fluid there how is it getting there its filling gear box up with P S fluid

[@jerrymoore7669]

The steering shaft and seal under the control valve may be leaking by.

[@jerrymoore7669]

The control valve may be leaking enough under pressure to force fluid into the gearbox.

[@jamescooper7404]

It dont circulate fluid when you pour it in resivoir goes out of vent just sitting there and lines get hot

[@jamescooper7404]

Can plugged filter cause this

[@jamescooper7404]

All seals in control valve and shaft seals are new