Massive Flymo hover mower riddled with problems. Can we get it fixed up to a good running condition? Thank you to my Patrons / daggerwin Music by Epidemic Sound
Пікірлер: 140
@roughandrrag2 ай бұрын
Day just got instantly better. Also i am working on my own project right now 😂. It is a John deere 318 that has sat for 20 years!!! I will have a video out soon fixing it.
@philipm10092 ай бұрын
Same here ,I working on a castle garden lawnmower, machinery restorer is brilliant inspiration to such a great hobby
@Ian6630premium2 ай бұрын
I did like the trick of welding nuts to the inner bearing race so you could press it off…will be giving it a go the next time I get the same problem
@christopherhennessey97662 ай бұрын
I love these videos an find restoration really interesting. I'd love to try doing something simple myself but no idea how or where to start, any ideas for help?
@hobouk38712 ай бұрын
We have a collection of tillers, rotavators, mantises and mowers outside. A garage more or less full of mower engines and parts including strimmers and brushcutters. We seem to like collecting these things.
@Hotdaddy5362 ай бұрын
..lol.. I'm restoring a John Deere 205 it's been sitting for 20 years just finished the deck new bearings belts blades.the motor runs great ..the mower has low hours on it..I just need to finish painting..then on to the next one.. Cheers everyone from McDonough Georgia 🍻🍻🍻🇺🇸🇺🇸🇺🇸
@jacobmurdock55032 ай бұрын
This man has the cleanest audio all the time! Very enjoyable to listen to.
@norad32 ай бұрын
i have no idea how you record this daggerwin, but you make the quality image and audio so clean and good and perfect. Your quality and effort on this videos is really top tier.
@holnrew2 ай бұрын
I thought the voice was very familiar
@PurplePikachizard2 ай бұрын
It’s nice to see old machines back up and running. I’m surprised how good that carburetor cleaned up! 🎉
@scratch196352 ай бұрын
It cleaned up that good the fuel tap magically washed away.
@Hellforsa2 ай бұрын
Cool info about flymo, it was founded and owned by a swedish company, called husqvarna. The first hover mover was invented by a swede called karl dahlman in 1963 :)
@anthonygaroutte8092 ай бұрын
One tip on taking out stuck jets and emulsion tubes. Tap the back of the screwdriver with a hammer while turning the screwdriver. Great job on the video. Very therapeutic
@ronanlaverty78192 ай бұрын
For an old machine, it does a great job of cutting the grass. Great restoration as always.
@michaelcard19732 ай бұрын
I live in Alberta Canada. I sure wish my winters looked like yours.... Your channel is awesome by the way. Thanks for your hard work!
@Sunny-Muffins2 ай бұрын
It isn't too bad this year. 😂
@airplanemaniacgaming78772 ай бұрын
@@Sunny-MuffinsHot-ish, cold-ish, spring, HOLY HELL ITS COLD, and everything in-between.
@bobuncle69622 ай бұрын
You have wrecked my viewing of other repair channels! I keep saying things like heh he didn't replce the gaskets or change the air filter etc. Enjoyed the video very much, thanks
@Sandy.J.Lloyd.Sr.2 ай бұрын
I was hoping you were going to do a complete restoration, I really enjoy watching them go from junk to a beautiful machine. Thanks for the great content, and I’m looking forward to your next video.
@OldFatBubba2 ай бұрын
I liked your method of removing the old bearing from the spindle. I’m sure the heat from welding the nuts onto the race helped break up any binding rust that was between the two parts. Well done!
@ZHmotors82 ай бұрын
By far one of my favourite channels, so easy to watch and informative !
@jerrybootneck17362 ай бұрын
Another awesome fix. Hope you're feeling better now.
@Blaznmav2 ай бұрын
I screamed when this popped up! Hope you’re doing well! Day maker for sure!!!🎉🎉😊
@richardcorwin18282 ай бұрын
I had the opportunity many years ago when I worked with a contractor that was a Brit here in the states and he had one of these Flymo mowers and it worked great.
@Justicesdad2 ай бұрын
Good working to show us all the details, thank you
@garrydonnelly64332 ай бұрын
I enjoy your videos. If I may just add, I have noticed that other KZbinrs say you should oil a new sponge air filter otherwise it will not filter correctly. I would refer you to "the exert James Condon" and also to Taryl Fixes All on this subject. You did power clean the machine at the end, however, I would have done that at the start to make the job easier to work on and film. Cheers to you and good luck for the future.
@enginecrzy2 ай бұрын
Neat machines, Kinda hard to find one here in the states as they are more popular in the U.K. I bought a Tecumseh powered one with the handelbar air filter snorkel on Fleabay & worked ok but found the muffler melted & baked & cracked the deck around the engine support webbing. Also no safty switches & a bit awkward to move about without wheels & the hover fan tends to flatten the grass. I like the vintage 60s Toro ones & also the small Flymo Kawasaki Tl Micromo.✌👍
@Reviveandrefurbish2 ай бұрын
Wow! I never thought I would see that machine being fixed, that is my all time favourite hover mower from flymo, they were brilliant when going over soggy banks and dense grass, sadly the plastic decks would wear out and need replacing, and parts for this are very scarce. Great video!
@nineteenandfortyone2 ай бұрын
Very interesting. I had no idea they made such a large model. It certainly does cut level, though as you say it leaves the rows of cuttings. You did very well with it. Thanks!
@fredrickvoncold2 ай бұрын
Nice having the right tools for the job.
@AndrewHCann2 ай бұрын
Excellent video :) also yes surprises me all balls were not gone and bend shafts too ! But save it and good go for another many years ahead! I never used them ever and but so cool too!
@hobouk38712 ай бұрын
What a nice mower great cut aswell, job well done. Just makes yuh want to go outside and start cutting the grass 👍
@Shagnasty2 ай бұрын
I am always glad to see another video where yo fix the mowers. Thank you for sharing. Looking forward to your next video.
@paulh60962 ай бұрын
Hi from the US. Love the made in England pulleys and US engine working together in harmony! Almost nothing is made in our countries anymore it seems.
@robertmailhos81592 ай бұрын
You definitely got that right about that mower is definitely a big hover mower 👍😎
@frothe422 ай бұрын
My father sold Flymo years ago here in the US. The were 2 Cycle, so you could mow on steep hills. I remember the carberettor being very difficult to adjust so that it would run properly. No wheels, just glide on air!
@hystocrates12 ай бұрын
Thanks for another great video! Always inspiring and relaxing to watch you fix up all kinds of machines. Great quality content👍
@larrykelly28382 ай бұрын
Great restoration, mows very well.
@colinmaceachern92 ай бұрын
I used to use one. I had the seat attached. It was a great machine to operate.
@philipgunderman72922 ай бұрын
Excellent video as always! Thank you so much.
@jeffdowns21462 ай бұрын
Great video, thanks for sharing.
@mdacosta58822 ай бұрын
Great timing!
@vinceianni40262 ай бұрын
Good job mister beautifully done
@deancoley79872 ай бұрын
Amazing compact old Girl, I realise the job was tough, but definitely think your better working alone, too many cooks etc. But will deny saying that if your mates are reading this comment lol
@themowerman2 ай бұрын
What a fantastic looking mower..
@jesterr71332 ай бұрын
What an interesting machine. I am fascinated by these hover machines. I would love to have the opportunity to find one to play with.
@waynewatts-ellson612 ай бұрын
Such an unusual machine! Nice find and good save as usual
@johanstahl55552 ай бұрын
I love your videos! So long I has longing after a new restoration video❤ I hope you filing well now😊
@playahata9972 ай бұрын
Awesome video as always 👌
@jacobhoekstra3402 ай бұрын
Great fix
@jamesdavis41242 ай бұрын
Always a great day when you put out a new video 👍
@patjohnson31002 ай бұрын
Great project for your enviable skills. I always look forward to your videos.
@jesterr71332 ай бұрын
I'm joining you from the US. We don't have machines like this here. I would love to see you do a restoration on one of these so that I can learn more about them. I find them very interesting. I would love to find a way to import one if I can find it cheap enough.
@Mikelp732 ай бұрын
I’m pretty annoyed at KZbin for not recommending your videos. It’s nice this evening I found 2 I hadn’t seen but still.
@lawrencewillard63702 ай бұрын
Flymo's were advertised as mower/ munchers. Had small one till it disassembled itself.
@johnmcenaney18142 ай бұрын
Great video 👏🏻
@unkjason2 ай бұрын
None of my subscriptions had any videos out. Thanks missed your videos
@broderperdurabo2 ай бұрын
It cut's quite nice.
@1950Argee2 ай бұрын
Welcome back! I enjoy your videos..
@alexdeleon71352 ай бұрын
Well done!
@garyclifton21802 ай бұрын
How cool is this never seen one before I want one lol
@matty35072 ай бұрын
I might be wrong but I think you find these machines were built and assembled a the Countax plant at Great Haseley for Flymo way before Countax started to produce the K series tractors
@screwthecabal64532 ай бұрын
I wild have completely restored this fine piece of English technology.
@RJLmachinery2 ай бұрын
Is that right it only has 1 impeller? looks like its missing one to me. Nicely done anyway 👍
@DanKoning7772 ай бұрын
Does anyone know what happened with *"part 2"* re: - FIXING A CHEAP FOUR-WHEELER QUAD BIKE? *OR* - SINGLE CYLINDER DIESEL RIDE ON MOWER CONVERSION?
@thissideup16202 ай бұрын
This side ….“Not as bad”😂😂😂
@broderperdurabo2 ай бұрын
The Swedish are smart. Flymo... Had one with a twostroke, i was terrifyed with the rpm.
@Lets_Go_Brandonnnnn2 ай бұрын
Hey bud you’re missing the other fan blade it’s supposed to have another one it’s very important to it for the Flymo gcl75
@dhs23292 ай бұрын
Another excellent video, I really enjoy your presentation style, you are so interesting to listen to. Do you do everything from experience and memory or do you use manuals? If you use manuals can you suggest a good source I am working on a Countax C600H and Kubota GR2120 but so far have been unable to find a good workshop manual.
@djdoo2 ай бұрын
The one thing I would have done extra is to change completely the iron piece that connects the 2 spindels and not weld it cause it is not heavy duty and moreover very rotten and prone to break again... Otherwise nice fix video!
@gbusrt65922 ай бұрын
Impeller, 3D printing adventure ... or model it and get pcbway to print you one perhaps
@volvogt212 ай бұрын
Flymo's always seem to cut nicely
@Ravelinn2 ай бұрын
Thank you for another great restoration. well done. what is the CARB spray you mention? i definatley need some of that in my working world, and what type of welding machine do you use? i need to get one but dont know the best type to get.. thank you
@MachineryRestorer2 ай бұрын
Thanks! I use STP Carb Cleaner. the welder is a Clarke 135
@spencerrobinson27192 ай бұрын
The mower did great, I think it would have done a nicer job if the grass was not wet. I have a general question with these small Briggs engines, Do you check the oil with the dip stick screwed back in or just dip it to the cap?
@dazedconfusedSKZ2 ай бұрын
Could maybe a little anti seize be put on the emolsion tube threads to stop it from catching or would that not be a good idea?
@WhiskeyGulf712 ай бұрын
That was disappointing ! It would have been so easy to have remade that cracked part with new thicker box section.
@JoshKilen2 ай бұрын
nice job.
@ianrandell97632 ай бұрын
Welcome back, it's been way to long in coming 😊
@jonathancharrington34102 ай бұрын
Brilliant love your videos ❤
@SHOINOFF2 ай бұрын
Ebay has impact drivers for like $25 us. Its like a screw driver but its super heavy and you smack it with a hammer. I have not had one fail me yet.
@LydiaOfTheNorth2 ай бұрын
"Made in England. 5 inch. Nice." - Daggerwin, 2024
@cu3tom_xd1492 ай бұрын
I'm in the market for a new Ultrasonic cleaner, what cleaner do you use Daggerwin? Also very cool and satisfying watch keep it up!
@Patrick49592 ай бұрын
grouse job mate she looks lovely afterwards and as for the well bearing yep no kidding they were loud shockers for sure from my view just looking at how they were spinning and i could tell right away the right one on the drive wheel pulleys had a lot of play in it but yeah changing both sets paid off in the long run and that old carburetor aka carby yep i would simply taking a propane torch with the nice flame and very carefully heat it up around the main jet is and then spray the oil down there as it would smoke but that,s a good sign as it,s allowing the oil to see past and expanding the aluminum etc but yeah all good and by the looks of thins yep she,s probably gonna need a paint job and well the deck might need a small fix too but yeah too easy i reckon and that,s a good engine from my view too and some people probably reckon they are terrible but yeah i like them for sure and only because it,s a qaulity engine and made by Briggs and Stratton decades ago for sure from it,s age and era etc and cheers from Australia 🐨🐑🦘🌏🇦🇺 or the land down under and yep Flymo is a good brand for sure for the average user but yeah i cannot blame there comply too.
@user-yq8yn7ww9lАй бұрын
Many interesting videos! Are snails a common issue in the UK? I've never seen them in the US
@whitecompany182 ай бұрын
Have you got a manual impact screwdriver for stubborn screw? The kind you hit with a hammer. Life saver them👍
@mathiaswerner92822 ай бұрын
Hi could you maybe if you can get your hands on one of these do a restoration of an Allen scythe with a two stroke Villiers engine this would be rally cool!
@johnkaup63822 ай бұрын
Should there be another impeller on the other spindle?
@dougjones40072 ай бұрын
Hands across the water!
@DanKoning7772 ай бұрын
See ya.
@jasperedwards27132 ай бұрын
i remembered them i thought allen made them
@Gupham2 ай бұрын
Are they worth much? Or rare? Got one sat in my yard, had it working a few years ago
@aserta2 ай бұрын
Huge!
@AnthonyCurreri2 ай бұрын
Why does only one side have the impeller? Id imagine their would be 2.
@Gaming984212 ай бұрын
Hello,ive got a westwood s800 but it has a Briggs and Stratton 12hp power built engine,ive tried to tune the carb on it but ive ended up just making it worse than it already was,can someone tell me how many turns out on the air/fuel screw i need.
@AnthonyCurreri2 ай бұрын
You need to invest in a puller to get those pulleys off.
@Fiatmannen12 ай бұрын
Imoeller replacement, get an 3dprinter
@789costela2 ай бұрын
It amaze me, al it needed was a little bit of cleaning & a new carb! Wel better *used* one ...
@azdeserthobbies20472 ай бұрын
For the love of God and the Queen I know you are going to fix the cracked pan right
@crystaldragon1412 ай бұрын
lol assembled in '89 just like me.
@TRYNGUESS12 ай бұрын
love it!
@aleksandrsaikovskij69302 ай бұрын
Сварка полопаетсв. Нужно было дать усиления.
@simonjones77852 ай бұрын
all the large flymos suffered ware and splitting on the edgedge of the hover deck
@nickdesplancke15112 ай бұрын
Daggerwin, whats up with that quad bike from a while ago?
@mikedavis29692 ай бұрын
👍
@jimmyg56362 ай бұрын
It seems like the video quality is a lot better. Or is it my imagination?
@MattTester2 ай бұрын
I would've never expected such a big hover mower, seems like an odd design. With robotic lawn mowers seeming to struggle to move, maybe they need a hovering front deck to sort out the mobility.
@jamesmoss50162 ай бұрын
You remind me of Denis when you got your hammer 🔨
@tommythomsen21042 ай бұрын
another good renovation but I have a question how is the ATV renovation going just a curious question
@jefflary54572 ай бұрын
Pretty neat you find some interesting things for sure! JeffinMaine