Massive Whipple 3.8L First Start on my Built GT500

[@ahmedal-mawlani5284]

Cody should open a performance shop the guy is loaded with knowledge and mechanical skills

[@vliztwiztid]

cody is one of the most knowledgeable YOUNG mechanics ive ever seen. i would trust him 100% , oh and SICK SONG OVERLAY during the assembling

[@tomkjr1]

Cody really comes in handy! He knows his stuff plus he can climb right into the engine bay...win/win! lol That 3.8 whipple looks insane on top of your engine...sounds wicked too!

[@CR3j35_90kid]

Cody definitely knows his stuff. Keep the content flowing. 👌🏽

[@F8GreenHornetOrangeEyeHellcat]

Congratulations bro can’t wait to see some numbers

[@wildbilll68]

This Cody guy really knows his shit! Impressive! You too Andrew I wish I knew half of what you guys know!

[@paulhudgins5120]

Way to go, can't wait for dyno pull ,and street pulls to see what the mega blower puts out!!

[@mach183]

Cody Shelby is sick !!! I miss my 5.4 😔😔😔😔😔 But love my 5.8 🥳🥳🥳🥳🥳🥳🥳🥳

[@1jzae86]

Can’t wait to see the numbers.

[@AdrenLnFueledScholar]

So happy this video came with the quickness!

[@bradmccausland9242]

Keep pumping these vids out just love them.Cant wait to see what it makes on the dyno.

[@RaceGasSmellsGood]

That Whipple whine! 👼🍷😂💪😂🚀🏎 Cant even hear it over all that chop! 🪓

[@sergebasque8460]

Good thing change anything that is not working or looking the way it is suppose to good luck man see you on your next video.👏💪🔥👌

[@dakotahaywood5763]

Hey Andrew, I know there’s a lot of behind the scenes stuff we don’t see, but I’ve never gotten the impression that you have any drivability issues. The car has stage 3 cams, e85, and a big monoblade throttle body, yet holds idle and drives at low speeds perfectly at least from what I’ve seen. How have you been able to avoid drivability issues despite all of the ridiculously aggressive parts on the car?

[@AlwaysnboostGT500]

Its alll in the tune. Whoever tunning it knows what they are doing and spends alot of time into tunning. Your going to have some driveabilty issues but nothing crazy. I had my best friend drive my car the other day and he couldnt believe how nice my car drives with my setup. So it can be done to help answer the question for andrew 👍🏾

[@brysonshires9742]

.

[@KingB015]

Good ass tune

[@lhv8]

It’s good that you guys can do it at home so you can save a lot of money not taking it to a shop. Shops are like $100/hr

[@AlwaysnboostGT500]

Nice Andrew cant wait to see how much it puts down. Imma need to borrow cody also so he can fit under my hood lmao to help some installs. Good job fellas 💪🏾

[@Buymyls1]

IMO Sounded like a old school 671 bds blower - more belt noise I love it My dad had a 70 SS Chevelle with that BDS Your getting more sound from the engine which is what I prefer vs exhaust

[@onecoldcrimson6502]

Must be nice to be able to stand in the engine bay of a mustang... Something would break with me in there...if I could fit lol.

[@brianunderwood8546]

Freaking sweet bro I'm so proud of you dude

[@romeoalphafoxtrot9517]

MAN! That bad mama jamma is going to be wicked!!! Johnathan Harder will refuse to ride in it unless you disconnect a couple of spark plug wires. ;-)

[@cyclonekevin6199]

😆

[@_carnivore_joe1520]

Sweet! Good job guys! Will be looking for the next vid with dyno footage!

[@jesusmondragon2519]

Beautiful car man

[@danadamczyk3295]

The face of pure joy

[@blainemathis985]

I’m ready to see what that whines gonna be like🤪

[@scotmorris8640]

My dude ! I’ve been a fan since Scott’s 5.0 n before termi,! Always a 👍👍👍fuck yeah #whippletheworld

[@Dame__420]

love your vids can’t wait to see what this snake does

[@F1FIDY]

Lol says while “we” work then Cody does all the work

[@MrKLenning]

Sounds sweet! Can't wait to see what dyno HP numbers she puts down!

[@mach183]

7:16 I’m getting circulation but throwing a code for possible pump failure or low voltage it’s ford code p1229

[@Sleeper_Solutions]

Thank god I convinced you

[@Sleeper_Solutions]

To post this. If you know you know

[@MustangLifestyleTV]

😀

[@justinm6110]

Nice shirt Cody, i tow cars in there almost everyday

[@rich5.08]

Cant wait to see how 🌶 it is

[@berkstangproductions494]

Need to make a video on his car lol

[@ilovebeardsilovebeards8309]

Intro is clean👌🏽

[@gadgetmantwincities]

It would be a great test to switch to Evans waterless coolant. It can handle higher temps without damaging your engine.

[@michaelkennedy2528]

I was told that yes tge coolant can handke tge high temp, the engine will suffer before you know that there is a problem. Did alot of reading and decided againt it

[@FPVXTC]

You know MFP Australia make a pretty well bulletproof tensioner don’t you?

[@MustangLifestyleTV]

I did not. I’ll have to talk with Matt

[@FPVXTC]

@@MustangLifestyleTV I gave the boys. (Matt & Mikey) a new GT500 ThumpRRR tensioner & they made a far better one

[@FamilyCTSV]

Living the dream man! I would be happy if I could at least afford to do FBO on my car..

[@flfun1684]

First few cranks the ECU had to adjust

[@cyclonekevin6199]

Sounds like a Pro-Mod.

[@w.branch1096]

Can't wait to see what she does now 🍻

[@brysonshires9742]

congrats, your blower is almost bigger than both my engines combined 😂

[@excelmaestro9798]

Is there a video detailing the install? That would be really nice to see

[@brandonburchell8]

Are you ever gonna do any lighting upgrades on your cars? Specifically the GT500. It needs black housings LED front and rear side markers (diode dynamics), LED fog lights (also black housings), LED license plate lights, and tint the headlights slightly

[@Supremeyaree]

How come you didn’t use the 2 step when you was racing it probably could’ve help with a better launch

[@MongoMotors352]

Nice!

[@RaceGasSmellsGood]

That your 3v in your sig pic? If so, nice! Love that color!

[@MongoMotors352]

@@RaceGasSmellsGood Thanks, it was mine. I traded it in 2 years age for my 18 GT. As much as I loved my 06, the 18 is so much better.

[@RaceGasSmellsGood]

@@MongoMotors352 dang, 18?! Nice! Did you go A10 or M6? Any mods yet? Love it, huh? I’m coyote swapping my Fox on my channel, then I’m trying to decide between an 18+ S550 with the A10 or a GT500...two completely different cars!

[@Jack-b5o6r]

How is the 500 build going to your other builds

[@Doitfor_E]

🔥🔥 I will be fast like you in a few months hopefully one day we can do a video sir let’s put the Ol 3v on the map

[@RaceGasSmellsGood]

Love me some 3v content!!! 🏎🚀

[@Sleeper_Solutions]

Best done with a gt500 swap like how mine is

[@Doitfor_E]

@@Sleeper_Solutions too late for swap already ordered parts

[@RaceGasSmellsGood]

@@Sleeper_Solutions dang, how do you like the swap? Iron or aluminum block? 5.4 or 5.8? What mods? 🏎🚀

[@coryemerson9225]

Did you get the cooling issue figured out? I know your IAT2’s were very hot on the Gen3R

[@edwinmiranda4005]

1:58 oof took a jab at Ving Ming Ping lol

[@AB-coyote]

Did you a VMP have a falling out? Genuinely curious since you made the China stabs.

[@shaunmarkel2595]

Yes that's correct

[@fordgtcs0796]

Yeah For an unknown reason

[@Tstaten4]

@@fordgtcs0796 he talked about it in his live. Basically the car didn’t make the goal of 1300hp so we went whipple

[@DefinitelyNotCapalotty]

Fucking lit 🔥

[@jordanhastingss1066]

Should’ve said Made in American not China or stolen from Australia! That would’ve been good, iykyk!

[@mgreene011]

Hey Cody, 2.66 or 2.97? Thanks!

[@joshsoudah8533]

Beautiful blower, does the hood shut all the way!?

[@MustangLifestyleTV]

It does not lol. But as soon as the k-member lowering kit comes in we will fix that

[@rpfg12]

Please don’t put a big cowl hood on it! It makes those cars look so ugly. Love the car man! Been watching since 4k subs.

[@ZapZarap]

Hallo from germany 🇩🇪 🇩🇪 🇩🇪 🇩🇪

[@Doitfor_E]

I wonder why Cody won’t go turbo?

[@codychaney6328]

easy relatable doing blower stuff since there are only a few turbo GT500’s. so its fun pushing new superchargers first when they come out but its defiantly been considered going turbo

[@Doitfor_E]

@@codychaney6328 oh okay I see

[@Sa__alkhalaf]

If my lower pulley is 10 % which number should i pick for upper my whipple is 3.0 and i dont want to cross 19 psi

[@bxlderyt2484]

whats the name of your outro song?

[@Zander13Productions]

🏎🏎🏎

[@michaelkennedy2528]

You guys use oil catch cans? Was told I needed on with my vortech V3

[@jayali9324]

Yes you need catch can’s it’s important to catch the blow by don’t want all the oil going into your intake manifold. Highly recommended

[@michaelkennedy2528]

@@jayali9324 for some reason, I keep PV on the drivers side, destroying the head and piston. Second time, once with 250 miles and the other with 850ish. #5 cylinder last time and now #6. Was told that the left bank is over fueling and getting to hot on the exhaust valve, both times it has been exhaust valve. Had catch can in place to keep buildup off the valves but it appears to have done nogood. Would really like to work with someone and see where the problem is at. Checkout my channel I have it all laid out on there in great detail. Let me know what you think please.

[@BoostaholicRacing]

🔥🔥🔥🔥🔥🔥

[@TheDynamiteGuy]

Seriously? 4000 lbs! I had a 60 Chevy Impala 4dr with a NA 400 SB (~400 HP) that would do 10's in the 1/4 at 3200 lbs! So, what you are saying is that if I had enough HP under the hood of that Chevy that your new Mustang would be left in the dust by a 60 yr old grocery getter! LOL!

[@juansalazar4159]

Do your neighbors hate your car?😂

[@jpatrick260]

That Ctsv again 🤔

[@MustangLifestyleTV]

Cody's daily is a CTS V lol

[@JW-kw8uc]

Pros

[@300zxdriver]

What did you use for time lapse?

[@2valve4six73]

Vid starts at 7:50

[@jesusmondragon2519]

First

[@Nicecardude100]

I didnt know Drake bell worked on cars .

[@TheDynamiteGuy]

Let's see, you say that the tensioner needs to be changed because it brittle but you decide not to change it and say that it's definitely the next thing on the maintenance list but you can't change it now while you are in there changing out all that other stuff! How much sense does that make? If that tensioner breaks, you are going to be pissed due to the damage it will cause and then you will be kicking yourself in the ass and talking shit to yourself about "why in the fuck didn't we change that when we had the chance? Now, look at the fucking mess and the costs of the repair!"

[@MustangLifestyleTV]

You’re not understanding... it broke on the car and didn’t have one to replace it until today

[@JRTrucking]

First

[@slowwwgt5487]

First

[@RaceGasSmellsGood]

That your 3.7 in your sig pic? Any mods yet? Love Cyclone builds!

[@slowwwgt5487]

@@RaceGasSmellsGood yeah fbo ported intakes on e85

[@RaceGasSmellsGood]

@@slowwwgt5487 dang, nice, man! Love cyclone content. Any other mods planned?

[@slowwwgt5487]

@@RaceGasSmellsGood might do cams next don’t know yet