Thank you so much you made setting it up so easy! I can’t believe I’ve had it in a box so long it’s so nice!
@golasergoАй бұрын
We love it. It makes batch work so quick and easy.
@sarahmeadows1414 ай бұрын
Wonderful! Thank you for posting these directions. I’ve had my slide extension since December and have been too intimidated to use it until now. It’s brilliantly simple thanks to your guidance. ❤
@golasergo4 ай бұрын
I'm so glad we were able to help Sarah 😊. The slide extension certainly adds to the functionality of the F1.
@ceee71856 ай бұрын
To me, this is by far the best X-Tool F1 video I have come acrossed. You explained everything, even exactly which port to plug in the extension with great detail and I highly appreciate that. I've subscribed to your channel because I love how well you explain things. Thank you.
@fowlerfirearms24586 ай бұрын
I notice that when you use the extension the speed is very limited. How long did it take to engrave all four compared to just engraving a single coaster.
@golasergo6 ай бұрын
Thank you 😊. I'm glad to hear you found the video helpful.
@robinslater4249 ай бұрын
Now why was I afraid to attempt to attach the slide? Your video was outstanding
@golasergo9 ай бұрын
Glad we could help.
@paulcabrelli18638 ай бұрын
I have been trying to decide whether to go for the xTool F1. It is a lot of money to invest. This one video tutorial of yours has made my mind up to go for it. From all the others I have watched on KZbin this the best by a very long way, most detailed and easy to follow. Keep up the awesome work GLG. Now subscribed with alerts turned on as well....,
@golasergo8 ай бұрын
Wow, that's a great compliment, thank you so much. And I think you will love the F1 - it is my favourite laser (and we have 10 of them at this point).
@glassman207 ай бұрын
Wow, I'm waiting for my F1 bundle to arrive and trying to catch as many KZbin videos as I can. This presentation has been so informative and will save me a lot of time - many thanks
@golasergo7 ай бұрын
Excellent. You are going to have a lot of fun with this laser. It really is great.
@DeborahBlagg8 ай бұрын
Cannot tell you how grateful I am for your brilliant tutorial… my extension tool has sat on the side, for three weeks, after my initial opening of the box, then closing the lid back on, too intimidated to proceed. Thank you so much for sharing your expertise, and in such a precise and approachable manner. I’m so glad I found your channel. , thank you for all your hard work, and the benevolent way you have shared it.
@golasergo8 ай бұрын
Thank you so much for your lovely comment. I am so glad it helped.
@DeborahBlagg8 ай бұрын
if you ever to do a similar post for the rotary attachments that would be awesome! @@golasergo
@golasergo8 ай бұрын
Unfortunately we don't have the rotary attachment. I'd love to have one but xTool probably won't send one to review at this stage until the channel builds up a little more. The reason they sent us the F1 and the slide extension was so that we could review it on our Alanda Craft channel which has a much larger following. However, we no longer record laser videos on that channel because that audience are mainly quilters so they are not that interested in laser machines.
@DeborahBlagg8 ай бұрын
@@golasergo I am certain it won’t take long to build up your followers, you really did an amazing tutorial.
@jamesmyers20879 ай бұрын
Still working out training on the F1 bundle training with the daughter and I. Used your video to sit down and watch together. Best hands down. TY Wanda.
@golasergo9 ай бұрын
Excellent, I'm happy we were able to help James. Here is a link to our F1 set up and demo that may interest you (on our other channel) www.alandacraft.com/2023/08/16/xtool-f1-review-and-demo/
@alexisl41588 ай бұрын
Excellent tutorial. I received my F1 bundle today. This is so helpful! Thank you.
@golasergo8 ай бұрын
Glad it was helpful! Hope you have fun with it. I love it!
@gregmccormick2110 ай бұрын
Excellent video. Thanks for the clean demonstration! Cheers
@golasergo10 ай бұрын
Glad it was helpful!
@jobcrowfield3 ай бұрын
Perfect!
@davidelder5399 Жыл бұрын
Great review, nice clamps for holding the material
@golasergo Жыл бұрын
Yes, the clamps are great. Well done to the person who developed these.
@BrucePritchett8 ай бұрын
Very helpful! I have a slide extension and the instructions (like pretty much all Xtool instructions) are not very good at all.
@golasergo8 ай бұрын
Thank you 😊. We really enjoy using the slider. It certainly expands the use of the F1 (which we love).
@AcryliWoodDesigns8 ай бұрын
Thank you, this video really helped.
@golasergo8 ай бұрын
Excellent, I'm happy to hear that 😊
@BORICUACHANNEL9 ай бұрын
Excellent Video very detailed
@ugoturco84237 ай бұрын
Thanks ❤
@mellow_witch9 ай бұрын
thank you!!!!
@chrispage-j7r Жыл бұрын
great video Thank You
@golasergo Жыл бұрын
Thank you too!
@fretworkpeddler9 ай бұрын
Excellent video! Thank you.
@alpenplott7 ай бұрын
Great tutorial - could you guess which settings you used by scoring and cutting the cardstock ?
@golasergo6 ай бұрын
We do have a video that gives the settings for a number of materials including cardstock on our Alanda Craft channel. Here is the link to that video www.alandacraft.com/2023/08/16/xtool-f1-review-and-demo/
@karljolley83469 ай бұрын
brilliant tutorial ; ? the slide takes about 2.5 inch / 6.5 cm from the hight?
@golasergo8 ай бұрын
I'm not sure what you are asking. Do you mean the height from the laser to the slide extension?
@karljolley83468 ай бұрын
yes, sorry I should be more specific. so the actual size of item. say a box, well now it is obvious to me... of course if we add the slide the maximum size of item must be reduced by that. Probably should have thought it through before asking. @@golasergo
@floridalove19 ай бұрын
This was by far the best tutorial for setting up the Slide Extension. Thank you! Greetings from Germany.
@golasergo9 ай бұрын
Thank you 😊.
@ProfHarden4 ай бұрын
Ok. So the calibration was interupted. How do I get the software to re do the calibration?
@golasergo4 ай бұрын
Not knowing exactly what happened, I can only suggest that you turn everything off, shut down creative space and start from scratch.
@VasosGeorgiou9 ай бұрын
where can i find that MDF coasters?
@golasergo9 ай бұрын
We are in Australia and got these at our local Bunnings hardware store. The brand name is Boyle and they measure 11.2cm x 9.4cm.
@QuiltersHandyman5 ай бұрын
very well done and thank-you....I do have one comment, or more accurately a question? I should first say that I just recieved my F1 and am setting up for the first time. Do I assume that once the slide is installed and calibrated that the assumption is that you would not remove it often. Do you have to recalibrate it, if for some reason one did take it off? I am going to assume that would what one would do...recalibarate it. Thank you for a fine video.
@golasergo5 ай бұрын
That's what we do when we remove it and replace. We recalibrate the slider. I'm glad to hear you found the video helpful.
@windsortenor700310 ай бұрын
Thanks for the video! A quick question. What is the top speed when using the slide?
@golasergo10 ай бұрын
Good question…I had to check over on the xTool website and they state the following: “ The speed has been limited to 160mm/s in order to guarantee the precision of slide extension.”
@ProfHarden4 ай бұрын
Thanks!
@golasergo4 ай бұрын
Thank you so much 😊 It's very much appreciated.
@ProfHarden4 ай бұрын
Great video! Very clear!
@tpost9748 ай бұрын
Fantastic presentation! Thank you
@golasergo8 ай бұрын
You're very welcome!
@danielastone7924 Жыл бұрын
Wuauu this is the best video ever !! Thank You ❤❤❤