Tying New Buildings Into Existing + Roof Inspection | Pass or Fail?

Merch Website: teespring.com/stores/mattbang...
Use code "YT10" for 10% off!
We got inspection! I'd say it went as it always does, what do you think? We tied into the existing with our new construction and it came out beautiful on every section.. Let me know your thoughts below on moving the corbels!
Want to see more? Subscribe to keep up!
Merch Website: teespring.com/stores/mattbang...
Use code "YT10" for 10% off!

[@MattBangsWood]

Make sure to hit the subscribe button! Let’s crush 50,000. Hop over onto the merch website at teespring.com/stores/mattbangsmerch ! BANG ON!

[@fritzpaul2740]

Do you know the rating onthat flameblock and is it code that you use it in California

[@modularliving1024]

You keep making these fun ass videos; i play them when I'm waking up and preparing breakfast. its better then old TV. We appreciate you posting a vid everyday. We are always excited to see the next one.

[@steve34043]

Great to see young people taking on the trades again. That is a big project!

[@FritsvanDoorn]

Extraordinary beautiful! What a great job you guys have! I am so thankful that you share your videos. Thank you!

[@liamjohnny335]

You always make a great vid and do a rather good job on the framing too Matt...looks great...always a great feeling when u can stand back and admire the time and labour put into a job well done ..keep posting em buddy...x

[@bradschandel1630]

I have learned so much watching these videos. Thank you for helping me be a better carpenter. Keep up the good work!

[@peterhanson3962]

If I could give you 50,000 likes I would. Thank you for your videos. I have learnt so much from this series and the craftsmanship from all the team is superb.

[@marczuri]

Good Stuff, thx! 35 years of carpentry and I learned something today!!

[@az_lintpatrol7242]

What an accomplishment looks amazing! BANG ON!!! 🤙

[@zombielicious2]

Watching ya pops walk them truces was awsome. I would have been puckered up for real doing that🤦‍♂️

[@DJRorYJr]

You and four other youtubers I will watch all / entire ads for, why? Because you deserve every cent! Amazing content.....keep it up!

[@MattBangsWood]

Appreciate that more than you know! Means a lot!

[@michaelcanto6175]

As usual you guys did a Stupendous Job, Proud of You All!

[@bobbond9730]

Another great video. Thanks for the knowledge. 👍🏻😎

[@ladyjulz]

This is awesome, thanks!

[@hgo8637]

Like always no disappointment in the video 💯 always coming with a banger 💯💯💯

[@robertburns8326]

Thanks for the insight,its makes life soo easy

[@Rspri10104]

Outstanding project. You guys do great work.

[@duncorp1]

Great job Matt and the team, oh by the way happy new year

[@alanflanagan4983]

Great vids. Quality craftsmanship

[@user-ft8vm7zh9n]

Just perfect. Well done. Wery well👌

[@DEAexotics]

great build and you are so close to 50k i am sure you will hit it keep up the great work

[@nicktucker4916]

Nice work guys!!!

[@JoseSoto-tp8ck]

You're videos are always on point brother you earnd my respect Ive learnd alot from you & that's coming from a Texas framer

[@cameroncrane3770]

My dad was a California framer and I'm a Texas framer that works for a general,contractor from Detroit. That's the hardest part of the jobtryinf to figure out what's going on.

[@gavinc2827]

Love from Alaska framers we love your work an your videos helped me at my new job

[@lepoty]

좋은 정보에 감사드립니다 ... 아름다운 집이네요

[@donellweathersby9163]

Matt great job on the roof,I'm glad to see you working with your dad,looking forward to working with my sons.What's the next build coming up?

[@scottyb1716]

The ol man been around. He about that life great builder clean work. And he got a little swagger and kid your good 2. U put the time in great work.

[@dwaynemurphy650]

Was iffy on subscribing but you keep popping up in my videos and i always watch them , purely good content , not unnecessarily talking random stuff just work and expertise . Keep em coming brother

[@eugenephillips8726]

Awesome guys awesome...love framing..mannnnn...

[@tannerj5826]

Nice work. You have almost the exact same toolbelt setup as mine. How you liking the suspenders now? I am enjoying them.

[@luischaverria9346]

Clean work bro 💯

[@dougchristopher2072]

Good job 👍 I like watching Craftsman like you guys plying your trade

[@DailyMobbin]

2:53 true lmao😂🤦🏻‍♂️ Bang On🤘🏼🔨

[@glacierfinancial]

Great job

[@feaonau7073]

Looking good bro 👍

[@xXtommyXx-kn6jg]

Gotta love when the phone falls out lol. Many of times

[@jbll36]

Hello Matt. What a fantastic build. Can't wait to see the finished product. If the next video is the final one, hope you end it with a "Bang". Lol. Enjoy the day. Ray L

[@dabruscar]

It’s like a cathedral dudes. Great stuff

[@EverydayIncident]

Interesting how you guys have to build out there in CA. We always nail off our subfloors with gun 8s but staple our roof decking.

[@DiverTrev]

Good job buddy 👍

[@dougchristopher2072]

Hey he's back 🤙

[@willhahn3209]

Nice work 👍

[@petereyre5188]

That is beautiful indeed 👌👌👌👌🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@cachorro8863]

I love that you caught the phone drop on film! How’s the battery run time on the skilsaw?

[@Brando2501]

Bet it cost about $600 to get.

[@stevenyeo5481]

Looking good. Im always dropping and breaking phones outta my pouch. Im good for like 2 or 3 new phones a year. Bang on Brother 🤘

[@ajs96350]

Used to have that problem, I get a Beetle case, been years since I broke a phone now.

[@derekt7606]

Come on people get him 50k 🔨🔨👍

[@mastertconstruction6651]

No nails inspection on roof sheathing before felt paper over it? Nice! Last time I have to wait for inspector for 2 weeks.

[@josebarrera7200]

How do you find the angles and cut them perfectly on the osb board?

[@bobbymejia9309]

Good shit bro.

[@sthrnvoice3198]

Good framing. Just out of curiosity; what are they doing with all the water that will come off that roof at the tie ins that you worked on in this video? That's a hellacious amount of water coming to one spot?

[@ibkhansen8036]

good work in have done

[@shoaibnasir1564]

good work

[@jaybohanon9722]

OMG! I can't believe your blade guard on your worm drive is pinned up. I'm telling! Lmfao

[@derekgailey4432]

Do u like cordless makita 36 v worm style or skil tru hvl cordless better?? Overall for every day carry?? I have the MAKITA.. I like it

[@gregoryhall1476]

I Swear the Phone fell in Slow motion, Funny Shit, Build looks Awesome. You should think about Getting a Phone for jobsite only, one that is Inexpensive, like an old Flip phone. Or a Carrying case with a clip... Lol

[@mdovideo1414]

Is that 3/4 inch thick OSB sheathing?

[@cameronoverfield8764]

Good video Matt

[@TheToolnut]

Which saw do you prefer? The Skil or the Makita??

[@jpm420f]

Me and my guys start a fresh house tomorrow!! Excited to be out of these darn basements!!

[@MattBangsWood]

You guys mind e-mailing me? I'd love to help you out a bit!

[@MattBangsWood]

[e-mail]

[@judsonsweany2283]

someone get this man a BURKE BAR!!!!

[@donforsyth9290]

Hey when you put down the t & g was there a step down in the trusses so that you could sheet over the t & g and it was flush or how did you do that?

[@MattBangsWood]

Yessir. It was set down 1-1/4” so the sheathing would run over flush.

[@davidlawther3032]

Try using an indestructible phone case it works really well

[@ems324]

Hmmm Matt is your blade guard on your circular saw pinned back?

[@maxcastillo6727]

Nice job bro What I would give to come and learn from you

[@carlcox7332]

I love that feeling when inspection signs off and cant find anything.

[@MikeHarris1984]

I would like to see it finished. Anyway you can come back for a re-visit after they are done?

[@modularliving1024]

Hell yes; me too

[@MattBangsWood]

Will definitely be doing this! Filming a walk-through of the 8-day house build today too.

[@jeffshackleford3152]

Samsung s7 active... I dropped a drill from the top of a 10 foot ladder and only dented the screen

[@Gidjoiner]

Hi Matt, I'm a joiner in England UK, i make some YT vids & i know what a pain filming, editing n uploading can be, I have 12,000 subs but been watching your vids n your subs are flying up, congrats on that 👍👍 I've been a joiner 36yrs so pretty much know what you're showing but i just like to watch n it's always interesting to see how things are done over there in the US , keep it up 👍 btw I've subbed, i don't sub to many channels, there's way too many amateurs in their garages talking bollocks on YT 😏😁

[@fordstoner6516]

Hey Matt how do u make ur skillsaws guard not come back down and stay up mines getting very annoying

[@mariusapril7853]

Nice one bto

[@shepherdfree]

Would it be possible to have a follow up video? Like when it’s done done

[@MattBangsWood]

I actually just filmed a follow up of a previous build, 10 day house build. Doing another with this later on!

[@samueldaniels8197]

“Now why is this true.....because we are in California” -Matt 2019 Can not be said any better then that my friend

[@lorenrickey5481]

Matt check out Dewalt's phone case. Clip it to your suspenders. Only $15.

[@rival3825]

Bro loved the work perfect since you guys are in cali also if you could answer a few questions for me I live in northridge ca and I'm doing my own roof solo

[@MattBangsWood]

[e-mail] Shoot me an email.

[@tinysand3517]

Hey bro , you guys a awesome man, I'll bet you guys just to framing. BTW the project is almost done, I don't see a lot of actions from Q, hope he's gonna be a journeyman after this project

[@thomasperryman4582]

13:10 in the background 😂😂

[@MattBangsWood]

Was that Quintyn flipping the camera off? 😂

[@leadslingerhd7151]

Can I get y’all to come to Pittsburgh and build my house

[@Eenloodgieter]

WoW my copliments team pannella👍🏻👊🔨🇱🇺

[@mitchelltownsend4119]

Hey Matt if you ever make it up north to Santa Cruz If love to buy you a beer

[@wimleuvelink3567]

goed werk

[@williamburley8699]

Phone insurance it's worth it. And can't believe you're not doing the siding that's the fun stuff and you get to make it purdy 😊

[@buffr]

How come y’all do the tongue and groove style wood and then plywood? Just curious, never seen that done

[@MattBangsWood]

T&G is for the overhangs, makes it look good from underneath. Sheathing just runs over the top.

[@brettkienle]

@@MattBangsWood do y'all cut out a notch in your rafter tails for t&g to be recessed?

[@keithevans1731]

Was the truss layout off at 7:58? Is that why the decking had to be shortened?

[@MattBangsWood]

Truss layout changed throughout this build in a few spots, due to the quad girders that held up the roof system. Not that it was wrong, layout just changed. Intentionally. 😊

[@keithN6]

I have to use the same pain in the ass hold downs in NJ.

[@almostanengineer]

Noooo, the phone! I know how you feel man, ran mine over with the reach truck the month I got it 😳

[@zoltankiss7732]

Hi , i love watching your work, you live far away but my house would do with you - hello from hungary

[@GerardoGonzalez-jc1je]

What’s the beat at. 4:30

[@jimkeith2335]

Matt what’s up how come you haven’t posted more new framing videos??

[@johngee4688]

🔥🔥🔥

[@AimarMeliste]

when we gonna see Q Cam again :D?

[@jayvirk8589]

what city are u in california brother im in california

[@andybarnes4663]

What is a Shiner? 🤔

[@TheToolnut]

A miss, you miss the rafter with a nail and it pokes through and catches the light from the inside.

[@jackmehoff1565]

Damn holidays killed your 6 week schedule nice job though God bless

[@MattBangsWood]

Keep in mind these videos were filmed a bit ahead of time as well. :) It was about 34 working days in total. A few days over 6 weeks.

[@chubbies2274]

How do I join ur crew

[@Willis476]

Wow an inspector on the roof!!Never in my area!Why is there a rip of plywood on the bottom of trusses?

[@adriangutierrez8177]

Starter board

[@Willis476]

@@adriangutierrez8177 starter board what? A piece of plywood 18" wide at the bottom? Is that a California thing??

[@tungsten06gt23]

I noticed when you tied in your new roof with the existing roof that you cut back the existing shingles and tied into the existing roof sheathing. Is this important to do because I have watched some videos where people just nail down over the existing shingles?

[@MattBangsWood]

It's just a quality difference.. I would personally NEVER tie in onto existing shingles.. It takes no time to strip back and create a better tie in. If you see people going over existing shingles, question the work they're doing..

[@tungsten06gt23]

@@MattBangsWood thank you very much for your help and answering my question. Love your work.

[@josephbohme7917]

Cell phones on the job, its a tear away lanyard or a real holster no sitting them down. You pay to learn. So many times they are slamming nails by eye w/o snap lines or any guide. Sloppy shiners. By the dozens. We have roof valley nightmares on our tile because of low slope and bad undersized underlayments they catch leaves and pine needles ea\ch season. Has to be sparkly clean or big Trouble. I want 24" rubber on both sides under the valley. what flashing widths are your valleys?

[@harryspence4562]

any NEW videos coming ?

[@cameronoverfield8764]

Just the other day I had roofers chasing me literally. I was like fuck man give me an hour

[@MattBangsWood]

I'm cool with it, but don't get pushy. Get pushy and things don't go well... Lol

[@Tkm112093evadell]

Its that little shit on the job that takes forever. This is pretty much exactly what I do everyday, redo other mistakes or redesign on older crap, and most of the time it just plain sux