Wash and Talk

[@Murph97]

CarPro Retyre needs the white foaming head. It produces nice thick foam that gives you a good dwell time. I don't use it every wash but when I do want to strip and re-apply it usually only takes 2 passes. I haven't met a dressing it couldn't beat yet.

[@johnevans715]

Second this comment

[@KingKhu0ng]

Did you happen to a video on how to keep a standard garage cool and insulated?

[@ObsessedGarage]

I haven't, but that's a great idea.

[@R35spectt]

We are just gonna go ahead and pretend like this car isn’t new.

[@g_aln6658]

Love a wash and talk! Its what brought me to the channel 3 years ago 👌

[@ceakoth]

The metered bucket filler brings me so much joy I can’t even tell you. Just think of all the activities you could be doing while filling up buckets! Please make this!

[@mttdffy]

Waiting the whole video to explain where this 991.1 came from. You sell the touring and get this?

[@joetacchino4470]

Based on logic and his rennlist signature, I'm thinking so...

[@_Suzuka_Joe]

RFM had a Brewster green 992 touring with a little over 300 miles that has sold so it seems like the 992 is gone, this replaced it and Matt probably put money in his pocket.

[@RayNLA]

@@mttdffy Knowing what we know now…Good guess! You win a prize 🏆

[@joevanseeters2873]

Looking forward to the new Pressol bottles. I love my Pressol bottles. That new water softening and purifying system looks really good. But of course, everything that Matt's shop put's out is the very best in vehicle detailing. His products are like driving Ferrari, Lamborghini, Pagani, etc.......the very best you can get in automotive detailing! Your one stop shop for the best of everything there is detailing, all the way to the garage itself.

[@herbpantaleon7485]

Not sure if that was intentional or not, but the absolute "no mention" of the car definitely brought the comments! Good job Matt!

[@AndyDufresne4]

I finally got myself an Ultimate Wall Setup from you guys last week and it’s very nice stuff. However after having it in hand, I came up with something that I see you don’t, or any of the other KZbin people do. It’s very simple, slide the black vinyl ends all the way up to the end of the hose. It’ll slide right past the ugly crimped ends/fittings and go up to the disconnect. Looks way better and removes bulk in the points that flex. Just something I noticed that have not seen others do. Like I said, stupid and simple, but makes it better.

[@redgt3244]

Re/tire is actually a great product I prefer to use it wit a dry tire. Try it again on a different tire.

[@Nickelsxx]

Did Matt get a new .1 RS??? Beautiful spec

[@Theonlywone]

This Kanzle setup is clean as heck! Well done Matt 👍🏻

[@canadamustang]

Matty kicking ass and taking names!

[@flo_fries]

Blue GT3 RS??? When the heck did this happen?

[@timpannella9795]

Maybe look into whatever cigar lounges use for exhaust fan.

[@ralphralphin]

Congrats on the new ride brother!!!! I love it!!!

[@dancomber]

The “16 991.1 Golf Blue Porsche GT3 RS” now in your Rennlist signature wouldn’t have anything to do with this would it? 😂

[@Pilot_71]

I don’t see the Brewster Green Touring in his signature… 😔

[@gregoryknotts653]

Matt I wonder if the metal panel behind the Kranzle is resonating making it sound louder, and if so maybe try putting some Dynomat on the back of the DI upper panel.

[@BondsIsKing]

I am a truck guy so most of Matt’s car in like ehh that’s cool. This car I was drooling over literally might be the best car I have ever seen.

[@TroySowers]

Can't wait to get mine - plumbing + electrical are ready!

[@LSD04]

What did I miss, where has this car come from?

[@mttdffy]

Glad someone else said something. I thought I slipped into an alternate reality. Didn’t even mention the car he was washing like it was old news.

[@KhrisKringle]

This. Did someone mess up the release schedule??

[@blues3531]

@@KhrisKringle nah I think it was intentional. The video description is "no comment" lol. And the title normally mentions like e92 m3 wash and talk, e36 m3 wash and talk. This is just wash and talk.

[@kenmartin756]

I was thinking that I missed something too! What is the story behind this Porsche?

[@paulhawkins95]

I was thinking the same thing. I have this on while washing my 997 and I look up and see the RS.

[@M6_1LE]

The TDS at my house in AZ is 375-450. My current OG setup nets about 5-6 washes using CR. All washes are full DI due to the hardness levels.

[@J1Z06]

I like this new ride! What’s the point of two pressure washers?

[@ObsessedGarage]

More flow

[@johnwalters878]

I have Northern CA valley well water that is 400ppm TDS. I ended up doing low flow RO to a tank that I wash with, then run that through the CR Spotless to rinse just to make sure it’s zero TDS. The water cost is very low as the RO filters are cheap and my CR resin lasts a really long time. I am on 2 years and still get zero.

[@bradsegal6630]

Matty just poppin' in with a new car!

[@ice-tim9796]

I love this color so much! Can't wait to see more videos with it.

[@bradleyfox9524]

Dang!! Mike must be too busy with OG 2.0 to clean the new whip up! Thing is absolutely gorgeous! Was wondering when we were going to get to see it! FINALLY!!!

[@MarcWenning]

Mike's is purple

[@Kole-d7k]

love the new setup and idea!

[@hypeNT500]

was there a build video with the new pressure hose setup

[@chrism1157]

For stripping tires, I've heard that the Adams Tire and Wheel cleaner is like brake buster but stronger.

[@Yesitsqk]

Hey Matt just wondering …have you been able to drive or see the 992 gt3RS in person yet? I know the prices for them is pretty crazy over MSRP but trying to get an allocation seems impossible

[@IowaLR4]

Matt just reminds me of the dude from Jurassic park. "Spared no expense". Nothing wrong with that. I tend to go for higher end tools/parts. Buy once cry once and all that. And even if you discover things that are beyond what you would spend, as Matt says... it's still FRICKEN cool. I love how Matt takes some pretty industrial/professional products and tries to introduce them to the prosumer. Such a huge difference in quality on some of this stuff. I mean just look at an MTM SGS-28 compared to 95% of the sprayers on the market. The hand fatigue reduction alone is a big deal for me. I was totally geeking out over the new garage doors too, but I don't think I will ever buy something like that. I have been using my Griots boss foam cannons lately and LOVING the metering tips. Even with adams wheel and tire cleaner it foams really well and doesn't seem too watered down at all. I use the max foam meter tip with an active 2.3 and 1.25 tip. I may only have to fill the cannon once a season at this rate. I keep one cannon for soap and one for wheel/tire. Love the content. No editing needed.

[@MarcWenning]

Yeah im in AZ my water is terrible, currently using the simple chuck from CR waiting for the OG solution

[@ratton5028]

Hi Matt 🖐 What is your reason for draining the DI water from your hose? Doesn’t seem to make any sense to me. Cheers!!.. 😎

[@ObsessedGarage]

DI water will rust the head of the pressure washer.

[@timbrown9731]

I think that was me about the satin black tips because I have them on the ISF and I wasn’t sure what to use to clean them and maintain Matt

[@herbpantaleon7485]

I'm liking the water meter!

[@chrism1157]

For water info, you can go to your cities website and they usually have a full report. Includes minerals, hardness, chlorine, etc... Chlorine can be a big factor in resin longevity.

[@ObsessedGarage]

Great call!

[@timkinley1779]

Chlorine is death chasing good water. Suspended particles that only break down (dissolve) to a certain ppm. Chlorine/Hydro-t/HTH are converters by oxidation.

[@Rephrased]

"No comment" lol, i think we all know what happened... Oh Matt.... Michelle must of got a new car huh!? 😂

[@lorenzonencioni4135]

The new DI system is pretty sweet, but you think that in the future can be sprayed in different colors this black like silver or blue ecc?

[@nomad509]

I've outfitted a Kobalt Utility Cart with the EGO Pressure Washer hanging from the supplied J hook brackets. Onboard are four 5 gallon Scepter (Canadian Made) Military Water Containers for my water source where two are tap water and the other two are strictly distilled water. I've upgraded to the OG spec Mosmatic sprayer and nozzle plus wand, which by the way fits nicely in the EGO holder brackets. I've also mounted a Prevost Hose Holder on the other end for the stock hose. Unfortunately I have not gotten a chance to fully experience this setup yet, although I did have have the pleasure testing out CHRIS METCALF'S EGO/FLEX booth pressure washer down in Boise 2.5 weeks ago!

[@jmacie3]

I would love to see this set up

[@nomad509]

​@@jmacie3I'll send you a DM hopefully tomorrow!

[@nomad509]

@@jmacie3 check your messages, I've got some photos!

[@johnwalters878]

For general wheel and tire cleaning, Brake Buster can’t be beat. For an actual detail, then more powerful cleaners may be necessary. The best part of Brake Buster is it causes no damage over time like some harsher chemicals will.

[@scotttaylor4430]

The wand holder is legit I can’t wait to get my hands on one!

[@mykey06]

Any testing done on the metering tips for Griots so we can use undiluted soap?

[@ObsessedGarage]

I did with Bilt Hamber, but I found them to not be useful. I do need to mess with them for GSF.

[@ZEK1031]

Any difference in the PDK calibration from the 991.1 to 991.2 from a driver's perspective?

[@ObsessedGarage]

There is a very noticeable different in speed and accuracy of the .2 programming.

[@ZEK1031]

@@ObsessedGarage thanks 👍

[@donaldgreen9292]

could you use exhaust fans from a bathroom for the garage wash? The DI system will be on my wish list for a couple years.

[@EuroJerk]

I'd love a system like that without the DI water, Have my setup mountable within studs and have a cabinet below to house some product. move that hose reel up like 5 inches and then have a small work surface, Sheesh that'd be solid. Been looking for a cabinet like that for a min.

[@I5ZQ8]

I've been playing with the proslat configuration tool to do something like that with the PW and hose reel on the slat wall and the cabinet underneath for towels and other stuff.

[@EuroJerk]

@@I5ZQ8 Im on the same idea with pegboard. Was going to mount it all to 2x4 to raise it from the wall, then hid unnecessary hoses/electric behind the peg board. Then have a cabinet below. Something like this without the DI thats compact and runs between studs would be Choice! i think.

[@kungfukenny6905]

Yes same!! Need that

[@underrated_assets]

The OG, OG content, love it!!! Can't wait for my Bilt-Hamber to arrive!

[@Skdjiejxuje]

I really hope pressol steps up their game. I’ve had so many sprayers fail within a week and some the same day. I’d love to be apart of the tester program for DI system. I see all types of water being a mobile guy. I haven’t brought resin in over year since I regenerate mine but I’ll be excited to get rid of cr spotless. Also it would be nice if you could add a function to keep track of how many gallons have been used.

[@RayNLA]

@@Skdjiejxuje I just had to “punt” (Matt’s parlance) a couple recently. They lasted about a year though so I’m not too upset. They seem like such high quality though. I’m sure it’s the chemicals we use that makes them grenade. Oh well…

[@jeffc6832]

What's the criteria for choosing the DI testers? Do they need to purchase a system? I'm in MN on city water that comes from wells that draw out of sandstone and limestone aquifers with minimal treatment. I haven't tested the TDS yet from my faucet yet, but it averages about 350 ppm of hardness in this area.

[@ObsessedGarage]

Yes, I'm going to sell them at cost.

[@jeffc6832]

@@ObsessedGarage I'm interested and will be paying attention for further details.

[@connorworden]

Are you coming out with your own OG tool line?

[@ObsessedGarage]

I don't have any plans for that.

[@scotttaylor4430]

Is a better alternative to the measuring jug, a set of precision scales so you are pouring the liquid straight in the bottle no mess and no wasted product?

[@376MCL]

I was also contemplating adding an RO set up to my current DI Cart. I was thinking something similar to a cart used for window washing but on a larger scale with higher flow. I am interested to see how you you will incorporate the RO. I assume it will be a high flow membrane along with a booster (pump) and a carbon pre-filter. Will you need to use a buffer tank? Right now I have a large DI tank on a hand truck with a carbon pre-filter and I want to add the RO membrane inline after the carbon filter but I believe the restriction will be too great. Also, need to figure something out about the waste water from the RO. Hurry up Matty Boy!!! I need you to figure this out pronto.

[@guillaumenormandin5099]

Wash & Talks are always a good time Matt. Have you tried Armour Detail Supply's Tire Cleaner by any chance, I just tested it on some really browned-out tires and after 2 passes the tires were back to black. As a dedicated tire cleaner it makes a lot of sense and is very efficient/economical, I'll be adding it to my arsenal for sure! If you haven't tried it, I really believe you should give it a go and see for yourself. Btw, Armour Detail Supply's Hero also is worth trying out, it's now my go-to for rinseless wash, clay lube, drying aid, 15:1 seems to be the sweet spot. Keep the good stuff coming, all the best.

[@stevel3881]

I feel your back pain. I move the same way when mine goes out. Get a Tens Unit for stim on your back.

[@davidbellefeuille8154]

I just got a simple bathroom exhaust fan in the ceiling exhausting outside in the soffit. Was recommended due to radiant floor heat and the amount of snow melt

[@Kyle-ts5th]

Dang where can I get that bracket on the wand holder for tips and foam cannons?! Sick!

[@refuztosay9454]

How do you keep a car clean with a huge hole in the top of the fender? Perfect car for OG as it will keep him busy cleaning the thing.

[@Campbellmasterson]

When I 've seen retyre used before it is with a foaming nozzle. Not sure if that makes a difference

[@Deagles456]

Uh I’m confused. What is this gt3 lol

[@BrianLouderback]

Man I feel ya. I just tweaked my lower back last week somehow. I have no idea what I did. It was painful I couldn’t bend over at all.

[@rilesh8692]

For the garage fan solution couldn't you use one of those whole house attic style fans and just have it vent the garage? Those definitely move plenty of air. Would need to add an exit vent on the exterior but they are one way.

[@IowaLR4]

Are the two main considerations for DI sizing just selecting appropriate GPM range and gallons per resin fill based on TDI levels? Some of the small tanks/solutions didn't seem to flow enough for the high gpm setups especially dual setups. I bought the big .90 cu ft. on the go tank which at 250 tdi is like 800 gallons. Thats a good 150 washes which I would need to use in roughly a year. I assume I can run the large tank with less resin if I wanted to not use as much? So far I have just been washing (outside) all on DI so I don't have to worry about anything drying at any point.

[@ObsessedGarage]

Our number was the need to pass 5 gallon per minute through our filter. Each filter in series loses about 10% flow. We are targeting the ability to run up to 5 stages of filtration for really sophisticated systems. So we should be able to do that, but I need to test it. Carbon/Sediment, RO, DI

[@timkinley1779]

All sediments aren't the same particle size. Different micron filters are what we used in the pharmaceutical industry. Larger filters in-line first, saving the smaller micron filters for the final product. You can always (and should) use filter aide to create an even bed for better flow thru.

[@IowaLR4]

@@timkinley1779 Interesting, I’ll need to learn more about this. I can run a water softener inline with my DI now. I have a hot/cold spigot in my garage fed from two 50 gallon water heaters. ilI was wondering if the softener was also helpful in prolonging the resin.

[@ScottKelley]

Loving the blue beauty. I need that kind of fluidity in moving to a different car. I've got a Crosstrek I've had for almost 3 years now and man, I want to get something more exciting to me.

[@timkinley1779]

Do you have any Subar-moos on the dash?

[@ScottKelley]

@@timkinley1779 Haha nope. I'm not into having trinkets stashed in the car.

[@xTotalGhost]

Why don’t you put the bucket filler on the hose bib?

[@ObsessedGarage]

I could. I will likely do a shorter hose and make it fit better.

[@xTotalGhost]

@@ObsessedGaragewe need a hose bib that’s has a counter in it 😱

[@kenbode8806]

You should outfit Mike's Garage with the MSS plus setup. I feel he deserves it!!!

[@MarcWenning]

I think Mike said he wanted proslat after installing them in Wabas place

[@shawnyanak1684]

Great Video Matt!!!

[@btverse]

Perhaps that E36 sale $$ he mentioned was burning a hole in his pocket faster than usual? :) Side Note, will those garden hose heads/Bucket Filler heads ever come back in stock, or are there equivalents coming?

[@blake8297]

Any sort of exhaust fan will just pull in hot humid air from outside to replace that air. Some sort of large dehumidifier would be optimal. I’d check out Santa Fe

[@ceasar5871]

general question, how much do i pay you to come over here in Pakistan and build me an OG spec'd out garage?

[@eurospec905]

If I had to wager a guess, this is the Golf Blue 991.1 GT3RS that RFMC had for sale not too long ago …

[@NMJ22]

Used carpro retyre and love it! What’s your thoughts on Adam’s wheel and tyre cleaner ? I find it much better than brake buster in cleaning the wheel in my experience!

[@hm_tcs1469]

Am I being trolled? The title “wash and talk” with no words haha

[@oswaldogutierrez6432]

Gran video Matt 🇲🇽

[@EdmanUR]

what did I miss at what point did it go from one to two kranzle on the wall😂😂😂😂

[@richardmesser1091]

Another beater ?

[@PabloConcrete]

😂😂😂

[@jimmytanner1126]

The Blue Goose looks badass! How many miles are on it?

[@richagrillo467]

Hey Matt, I love all your Due Diligence with regards to pressure washing cars, but what about house and decks or concrete. Do you do any of that yourself and do your pressure washing set-ups work for any job

[@ObsessedGarage]

You need gas for that. I have a gas Kranzle that I use for that. It is up in Helen. For my house in FL, I pay a guy to do it.

[@afiqazhar3725]

does normal spray vs foam spray make a difference? Because my Retyre comes with foam sprayer and works well so far

[@RNMAutomotiveAddiction]

I thought you just recently bought this house and now moving again? The RS is lovely.

[@bbqjones]

1. Try voltaren. 2. Sleep on your side or back with a pillow between or under your knees. 3. Nice car :)

[@matthewwingle4637]

I am waiting for the DI system on bated breath. I have a CR Spotless, but my water is around 380 to 400 ppm, so it blows through mixed bed like crazy.

[@blues3531]

Is the $1000-1500 pricing rough estimate including the first resin cartridge or is that just the case? It's a steal if the resin is included and it reduces the complication of a wall mount install.

[@ObsessedGarage]

Pricing will include first batch of resin.

[@timbrown9731]

I thought I was, in some sort of alternate universe I think Uncle Matty misses his blue GT3 days….. I really miss that color that you had, i’ll tell you man I love that ultrasonic blue Mica on my I SF.

[@gimaru1]

Now that’s a nice car!! Thanks for posting.

[@DilutionRatioOfficial]

Hi Matt. Did you try Labocosmetica Primus 2.0 prewash shampoo?

[@ObsessedGarage]

I didn't.

[@DilutionRatioOfficial]

@@ObsessedGarage It’s an excellent prewash with VDA approval!

[@blues3531]

Feels like its been a while since we got one of these. Nice.

[@dumhic]

Can someone explain why 2 pressurized units? Benefits

[@ObsessedGarage]

More flow

[@KillerBeez1]

I work at High Reach in Sanford which HQ for 5 branches across Florida. If you need a scissor lift used or new let me know, I’ll make sure you get the good guys deal.

[@RAZGR1Z]

Congrats on the dream car!

[@austgee]

Now you and Mike can park your GT3’s together in a V shape in the driveway and pose in your bathing suits

[@KiaTia09]

Great new toy! I am confused you might need to sell the Helen house but you plan to buy the neighbor's home?

[@The_Stick]

Congratulations on the RS Matty (I am assuming that it is yours). I think the metered bucket filler is a great idea. Just last night I was trying to fill my rinse bucket while doing other things and this would have been nice to have. I _like_ that you chase things that are a bit out of the ordinary.

[@bobjackson7516]

My family and I vacationed in Helen not long ago, love...LOVE that town. I'm seriously considering us coming there in July '25 again just to stay at your place. You talked about having something to drive for 1k(ish)? With the 'requirement' of us washing it..... That sounds awesome. No..... That sounds BADASS to me. Not sure how you did it man, that's fantastic marketing. You now have me wanting to vacation to a dudes house that I saw on the internet to stay at his place, and wash his car. I'll need to formulate a sales pitch to the wife to make it appealing to her.

[@EuroJerk]

Couldn't you put the bucket filler by the spigget? then your system would stay the same for the most part.

[@brando123b]

The poor Pressol folks trying to please Matt 😅

[@em6xn]

This measuring system should be integrated into the faucet ! with a touch screen, you can select the quantity of water, hot or cold I'm sure the Chinese created one😅

[@timkinley1779]

Those type of metering valves are industry standard in chemical processing.

[@TheM1ajor]

Retyre didn’t do jack s because you have to use a foam nozzle not a spray nozzle !

[@zelo885]

You gotta use the right sprayer for retrye. Its the white foaming head.

[@bertroane131]

While we are on the topic of things “just showing up”, when did Tommy come back? I saw him on the Proslat video, but no one said anything. I don’t thought he was working for 777?

[@jmking7]

Matty playing with new setup and washing a car. Good stuff!