Thank you all so much for bringing me on board, it was an awesome experience to meet/work with you! Very excited for what the future has in store.
@omega.v106 ай бұрын
The future has a bunch of e60s for you 😆
@PabloConcrete6 ай бұрын
Hey Caleb! Great content as usual. Matty was a great help in this video 😂 Hope that 997 comes soon for you!
@petesreef18916 ай бұрын
Goo Caleb, love your channel keep up the great work 👏👏👏
@Grinch836 ай бұрын
One take OG, its one of the reasons I subscribe. Forgetting to remove the jug seal on the p&s bottle ROOKIE.Those moments don't happen often on this channel. Keeps things organic
@jessejames77666 ай бұрын
And when Connor accidentally sprayed the brush with rust inhibitor instead of brake buster when he went to scrub the tire. Totally agree.
@asphaltspecialties6 ай бұрын
@@jessejames7766lol I did notice that and instantly looked at Matt’s face. He was like hmmm that’s a new one haha
@armourdetailsupply6 ай бұрын
Super cool to learn about new people. Love this concept!
@Jose.G.Y6 ай бұрын
Would be cool for you guys to do a Wash and Talk with Matt as well.
@armanbrown23026 ай бұрын
This is crazy because i ran across his channel two days ago because he had a videos polishing the same car as mine and i plan on doing mine and here he is on the OG channel
@kai_2915 ай бұрын
CarPro can be proud of themselves, getting a "pretty nice" from Matt testing a product means a lot
@keshoremooralie23766 ай бұрын
Nice one! The opportunities you have created for others to experience and be apart of is truly remarkable. The solution for glug-free flow while pouring from gallon is air return.
@EnthusiastProject6 ай бұрын
When using that spout you have to pour the bottle from the other end, spout side should be towards the ceiling when tilted, that way you get a lot more control over the pour. Then when the bottle is like ~60% or something less fluid you can pour how you did in this video.
@dansuch86466 ай бұрын
yoo pretty cool to see you with cc detailing. I've followed his journey for awhile now
@PabloConcrete6 ай бұрын
Things we have learnt from this video: 1. Most cars suck donkey balls 🤣 2. Rod bearings are nonsense 🤌 Never change Matt!
@ObsessedGarage6 ай бұрын
Ha, ha...
@bisser016 ай бұрын
Hi Matt, I’m a big fan of yours thank you for all your videos. I have a small tip for the oats gallon red spouts don’t open and poor but instead turn the gallon around and then twist it open while it’s upside down and then close it while it’s upside down and you won’t have any spills .thank you so much for the years of good good detailing content.
@ObsessedGarage6 ай бұрын
Great tip!
@toddregister66216 ай бұрын
Love the undercarriage washer....wish I had the setup for that! Congrats Caleb.....
@kkeshav746 ай бұрын
I think Chase knows how to wash a car now too
@NoHandleAT6 ай бұрын
I am dead with that P&S pour struggle... HAHAHA.
@rarbona2 ай бұрын
Good wash n talk. Thanks for the video. Ide really like to see a review on the Northstar 240v pressure washer #1571108 to see how the numbers compare with the dual kranzles. Not sure if its possible to get the pressure down to 1100. It doesnt state what size nozzles it comes with. (its mislabeled as a 230v on northern tools website)
@kenmartin7566 ай бұрын
Chase has definitely grown.
@DJ_Driven6 ай бұрын
Matty, let's get to installing those custom coilovers 💯💯🔧
@TimMSUK6 ай бұрын
Wouldn't worry about hitting the 4% PIR for either touchless or auto foam. For well protected cars even 1-2% cleans fantastically.
@BarbWaltersMusic6 ай бұрын
Funny about the comment with the phone, for the longest time Doug demuro just used an iPhone to film his stuff and look at him now.
@EastLosPyro6 ай бұрын
Let’s talk about your watch Matt!!
@Jose.G.Y6 ай бұрын
42:00 something that can help for folks that have the longer wand holder is to put the wand back in with the nozzle side facing up.
@timkinley17796 ай бұрын
I leave my trigger and wand connected.
@Jose.G.Y6 ай бұрын
@@timkinley1779 that works too. I think Matty forgets time to time and has to pull the pliers 😅
@kenmartin7566 ай бұрын
Ironic story....I also live in Lakeland, as does Caleb. I have never met him, but have corresponded via social media a couple of times. I first learned of him when he posted a video of an open house at OGHQ a couple of years ago, that I also attended. I commented on it, and eventually found out that he is from Lakeland, too.
@asharp39916 ай бұрын
That is ironic that Caleb went from attending an OG open house to a Wash & Talk with Matt. Pretty cool to see
@carsondomel529116 күн бұрын
Hey Matt, great video. I was wondering if a 4.0 orifice nozzle is too large for my k1700 cube? Thank you in advance!
@ObsessedGarage15 күн бұрын
It is too large. You'll have a huge pressure drop.
@CarsonDomel15 күн бұрын
@@ObsessedGarageoh wow, thank you so much. Exchanging now for a 3.0😂
@nelsongarcia90046 ай бұрын
Hello Matt, great video, really enjoyed it. Do you have problems with all the humidity in the shop ? Such as tools rusting or mold?
@toddregister66216 ай бұрын
I was curious about that too. Must be some good floor drains and AC to dehumidify.
@nelsongarcia90046 ай бұрын
@@toddregister6621 I agree, but even so, I still I have to constantly be on impact sockets with oil and it turns to be very time consuming. Maybe someone has ideas or solutions I haven’t come across. Even thought of getting 2 portable dehumidifiers for 3 car garage.
@timkinley17796 ай бұрын
This is his fourth home garage, plus OGHQ. Humidity is everywhere outside in the deep South. Nobody makes tools or equipment that are just raw iron.
@ObsessedGarage6 ай бұрын
Nope, it dissipates in minute or two.
@omega.v106 ай бұрын
Challenge accepted on the Dct M5. I'll be honest, the car does suck 😆, but when it works, it might give your gt3 a good chase.
@asharp39916 ай бұрын
ohh shots fired Matt 🤣🤣 I can't wait to see the e60 finished Luis
@omega.v106 ай бұрын
@@asharp3991 me neither. Soon, very soon
@AivarLiimets-pk7tp6 ай бұрын
Nothing wrong with bottom up. Gyeon has the same recomendation for their foam.
@Hunter5446 ай бұрын
How would you recommend cleaning Cloth houndstooth seats? I’m a little worried of the black bleeding into the white. (Recaro classic experts if that helps)
@btverse6 ай бұрын
Would you use Clarify Phobic on the interior side of glass? Or only exterior?
@ObsessedGarage6 ай бұрын
Never on the inside. Only outside.
@anthonyxerri59196 ай бұрын
Hey That Bucket System Wash & Rinse NEEDS A POLE IN THE MIDDLE to push not kick it around the car...and wear out shoes your welcome ......a costumer and Fan
@blake82976 ай бұрын
What does the dude say he loves around 330? It looks like it touches the underbody cleaner but Matt says something about letting them dry without putting them in his bucket??
@Nick-os3ue6 ай бұрын
Open and close the the nozzle while the bottle is in the pour position.
@JimBoomer6 ай бұрын
HAHA I got a Giraffe Tools pressure washer ad for watching this video. I don't think KZbin knows the OG audience very well lol
@YuriTarded-hf1nv6 ай бұрын
The new one they have looks promising
@sportil846 ай бұрын
I know you can’t use the CR spotless with the dual setup. Is there a way simply isolate it to a single pressure washer use so you can use the CR spotless for your final rinse?
@ObsessedGarage6 ай бұрын
Yes, I have valves for it.
@ROBERT-eg4ys6 ай бұрын
Hey Matt. Have you had a chance to look at the Active 2.3 yet?
@ObsessedGarage6 ай бұрын
Yes, it's decent. It is really, really loud.
@Willschaefer16 ай бұрын
Have.you thought about doing dual kws700ts is it possible if not why
@DJ_Driven6 ай бұрын
Are you selling the glass cleaner and what microfiber towel did you use?
@ObsessedGarage6 ай бұрын
Not yet. I have to use it a while.
@thelastdetail50446 ай бұрын
Matt, what did you put on the tires before putting tire dressing on?
@ObsessedGarage6 ай бұрын
Stoner's Tarminator
@chrisdenman19856 ай бұрын
Never seen that done before. What does that do for you in your tire prep process?
@Jeeper13786 ай бұрын
DPC wants to pair up bwahaha
@tbarricklow826 ай бұрын
Why in the world is Matt detailing wheels with a Rolex on? Come on, bro.
@ObsessedGarage6 ай бұрын
Why not? What is the point of having a watch if you aren't going to wear it.
@tbarricklow826 ай бұрын
@@ObsessedGarage well of course just not when you are washing your car. :-)
@johnwalters8786 ай бұрын
Every watch I have ever had, I smack it on everything.
@abdulshabazz85976 ай бұрын
Mentally exhausting. Should I attribute it to the boy's youth, which I can forgive, or to his lack of authenticity.
@Riverguide336 ай бұрын
👍
@Danny-sp9yu6 ай бұрын
These wash and talks are just excuses to get other people to wash half of the Evo😂