Maverick X3 Bearing Greaser Tool: How to grease your bearings

How to use the Bearing Greaser tool for your Can Am Maverick X3. Your application may be a little different if you have aftermarket parts, or a different SXS of course. They make them for specific models, so be sure to double check before you order.
Here is the link to the Bearing Greaser Tool that I used: www.amazon.com...

[@BigBoyToyzz]

Can you tell us what the tourqe specs are for caliper and axle bolt?

[@tbarrett3037]

Good video, looks like you put the concave washer on backwards though.

[@snowboardtim]

Thanks for the reminder. I forgot to mention that in the video. *after the video ended I was paranoid that I didn’t put it on the right way so I check it and it was correct. I just cut that part out lol

[@snowboardtim]

Checked*

[@n1p]

@@snowboardtim k Liliuokalani;; I'll m chrio illimiijujouijiciiioiiuxijoiujigoiiuk

Which bearing greaser is that? Is that the Extension Depot one? Thanks.

[@ronnieburke1787]

how many kilometers before greasing the bearings?

[@Dive-Bar-Casanova]

800 and every 800 KM 500 miles.

[@northernlights1840]

What size is the castle nut?

[@bryanr1382]

right at 3:59 it looks like a 30MM

[@dsm02c]

It’s 30mm for sure. Just did mine.

[@douglowenthal1320]

Any suggestions I cannot get that castle nut off used light-duty impact driver 3/8 in that will not do it I don't have a breaker bar try to torque wrench nothing works. Thanks

[@gsrhatch14]

Get it off yet?

[@jamesroberts9323]

It’s torqued to 150 ft-lbs you’ll need a big 1/2” drive breaker bar... I needed using my giant torque wrench to break it loose

[@davidkrahn5488]

what kind of grease ?

[@Dive-Bar-Casanova]

Mobil bearing grease from Vato Zone. The red stuff.

[@BattleBornG]

Lucas Red and Tacky