MAYTAG 92 ENGINE RESTO (part 14)

[@RamblinAround]

It's sure looking good...great work as usual!

[@cdoublejj]

how's missouri treating you guys?

[@805ROADKING]

Thanks alot Bud!!☺

[@wyattoneable]

Wouldn't it be nice to have quality like that back in our lives? I'm sure that old technology has it's limitations and issues but just seeing how heavy duty everything was back then is refreshing. And it still runs. My 5 year old washer had to be replaced because it became non-repairable. Crazy.

[@aserta]

Buy an older model, take it apart, and slowly put it together. I have an ancient Miele (sure, they cost a foot and an arm, but when you pop one open, and see cast iron, cast iron, stainless, metal, barely any plastic at all, you know you made a good purchase) i've been using that bastard for almost 20 years now. I did a make over on the internals recently and expect it to last again, if not more. New stuff? GARBAGE. Full of plastic, cheapest stainless, thinnest they could use, the pumps are utter shit, the rubber baffles or tubes are rotten from the factory...remember when i went to buy parts for my repair (because the market is still full of them, even tho the fuckers say "it's unfixable" and there was a leaning tower of outer plastic drums half blocking the door in the shop, all of them used, and to be thrown out after the plastic mounts had snapped. PLUS, it's a hazard to own a modern one, mainly because even in old properly build ones, if the shaft snaps, there's a chance the inner (still stainless) drum might come undone and act like a freaking cleaver and cut right through the top of the washing machine. And i am not kidding, there's tons of stories about people getting hurt.

[@805ROADKING]

At least we grew up in an Era that we had the chance to enjoy a little bit of quality stuff, kinda feel bad for the next generation eh!!☺

[@BrucesShop]

You are right about the clutches being similar to Briggs. I needed to relax tonight RK. I've got a Tecumseh snowblower giving me grief. I think ANOTHER valve grind. (OK not grief) I can see grandma pushing on that peddle. How you do this without Editing is beyond me You are a MASTER!!!

[@805ROADKING]

Thanks Bruce!! The valve jobs are the fun fixes for me!! I can see how they are a pain in the balls for the stuff you repair!!☺

[@BrucesShop]

They are always behind something. Carb, heater boxes you know

[@TheOpenAirGarage]

Wow, the paint looks awesome. Getting super close.

[@805ROADKING]

Thanks Bud!!☺

[@PastPreserver]

It wont be long now it's looking good. :) I just took my washing machine to a show this weekend I cant believe how many people had never seen one with a engine on it they really seemed to like it. I had it set up with clothes and water a lot of people were like I should have brought my laundry today lol.

[@805ROADKING]

They are the Star of the Show!!☺

[@John-Von]

Beautiful thing this old engine, great watching this restoration, stellar work Mr. Roadking!

[@805ROADKING]

Thanks John!!☺

[@Phantomthecat]

Looking good! Love this little engine. :)

[@805ROADKING]

Thanks Bud!!☺

[@mjmcomputers]

I'm behind on these videos but not cheating and skipping to the Startup. Love seeing the progress. Nice work!

[@805ROADKING]

Thanks MJ!! Take your time, they're not going anywhere!!☺

[@KowboyUSA]

Unusual seeing an ID/information plate just sticking up unsupported like that. May have something to do with unsupported tags getting broke off accidentally, or people just breaking them off for the heck of it.

[@ziggassedup]

Yep..That's a set screw in my books...It looks great RK.

[@805ROADKING]

Thanks Mate!! Love hearing from the Pros!!☺

[@WayneEarls]

3:17 flipping off all the haters? ha

[@805ROADKING]

Subliminal Messaging!!☺

[@keithnoneya]

I was laughing when I saw it too! LOOK he's flipping off all his subscribers! AHHHH!

[@cdoublejj]

Good work buddy! edit: sometimes i use painters tape to help with scratches but, it doesn't like oil and some surface or there just isn't room. next time i do paint i'll do what you did and same some for touch up.

[@805ROADKING]

Thanks Bud!!☺

[@99carnot]

Looking good! This engine has lots of interesting features. Nice to see you working in "real time" Liked and have a good day!

[@805ROADKING]

Thanks alot Bud!! You have a great day too!!☺

[@TheFurriestOne]

Getting real close to that first run!

[@805ROADKING]

Yeah Buddy!! ☺

[@aleblanc3547]

I can almost smell the smoke, we're so close! Thanks, Roadking!! :>)

[@805ROADKING]

Thanks Aaron!! We had it running at a Show over the weekend, you can definitely smell the smoke, whether you want to or not!!☺

[@shawnmrfixitlee6478]

enjoyed King , Great looking build man ! Thumbs up..

[@805ROADKING]

Thanks alot Shawn!!☺

[@Sasquatchadventures1]

I didn't see you bend over the pin on the clutch when you didn't want to loose the ball bearings. great progress tho! I have a pos Honda gx160 torn apart right now rebuilding it.

[@haatch999]

crazym8654321 i made same comment and your right he didnt and its gonna fly out...

[@805ROADKING]

I also said I wasn't gonna bend it over and was gonna bend all the pins over off camera!!

[@haatch999]

805ROADKING your right my mistake sorry just watching out for you as we would hate something like that to happen

[@locouk]

14:11 I've never seen a 4 sided hexagonal bolt before, I suppose there's a first time for everything!

[@805ROADKING]

Yeah Buddy!! ☺

[@joshcrd7925]

Lol, so true...and for who ever tried telling roadking it isn't a set screw, you are wrong. Set screws were square heads until socket heads became popular. They don't round off like socket heads either.

[@TheShadeTreeFixitMan]

Really looking good. Won't be long now.

[@805ROADKING]

Thank you George!!☺

[@scotty2307]

For anyone who wants to get technical, that is a square head set screw.

[@805ROADKING]

You tell them Scott!!☺

[@creamofcardstv]

Seems to be going smoothly. Looks the business! :)

[@805ROADKING]

Yeah Buddy!! Smooth Sailing on this one!!☺

[@smallenginedude71]

looking very nice roadking!

[@805ROADKING]

Thanks Ben!!☺

[@merlemorrison482]

a dab of thick grease would help hold those ball bearings in place

[@fairlane2020]

Coming together very nicely 🙂. When are you guys going to have another engine night?

[@805ROADKING]

We usually have it every Monday Night!! We don't always film them!!☺

[@WallysPlace66]

She's looking good bud

[@805ROADKING]

Thanks Buddy!!☺

[@JoelHudson]

1:10 Yay tripod rides!! 16:35 Scratches? didn't see it, it didn't happen paint's ok! :-)

[@805ROADKING]

I like you're thinking!!☺

[@not2fast4u2c]

Lookin' Good !!!

[@805ROADKING]

Thanks Bud!!☺

[@ligebellbuckletn]

Can't get enough oil on a maytag, ,,,looking Good.

[@805ROADKING]

Thanks Mate!! Did you buy that Foos!!☺

[@ligebellbuckletn]

805ROADKING cool springs power museum got it I think, ,,,

[@805ROADKING]

That's a good place for it, maybe we'll check it out next Spring!!☺

[@johnstrange6799]

Looking good.

[@805ROADKING]

Thanks Bud!!☺

[@parker73711]

i know your video was posted a few days ago...but i believe you forgot to bend ends of kotter key (end of the clutch) over so it wont come out...also the one on end of kick pedal as well...otherwise looks fantastic!!

[@805ROADKING]

Nah, I didn't forget!! I said in the video I wasn't gonna bend the cotter pins over and that I was gonna bend all the pins over off camera!!

[@parker73711]

right on...must have missed you saying that.....

[@mikedoblo4782]

you forgot the most important thing, the smiley face sticker

[@805ROADKING]

We'll have to see how happy this engine is!!☺

[@cptyler150]

Hummm i wonder where they got that idea from. Ball bearing clutches?? Hehe

[@rogeroconnor5182]

looks nice , almost showtime

[@805ROADKING]

Thanks Bud!!☺

[@advance9572]

Looks good bud...

[@805ROADKING]

Thanks Mate!!☺

[@19bug66]

good stuff !!!!!!!!!!

[@805ROADKING]

Thanks Chuck!!☺

[@88fiveoh1]

So the crank and kick starter are tapered for the taper pin?

[@805ROADKING]

Yeah Buddy!! ☺

[@b_mb4948]

Did anyone see if RoadKing bent over the cotter-pin from the starter clutch assembly?

[@805ROADKING]

I also said I wasn't gonna bend it over and was gonna bend all the pins over off camera!!

[@b_mb4948]

805ROADKING Yeah I remember buddy ;) I just wasn't sure if you could get to it once the cover was on, but you're the expert!

[@Mercmad]

arrghh! the panel hammer!!!

[@brandonquenneville7330]

quality craftsmanship *

[@805ROADKING]

Thank you Brandon!!☺

[@deweys]

Hey Roadking! What engine would you recommend for someone interested in restoring small engine for the first time?

[@805ROADKING]

Briggs 5S or 6S They are dirt cheap, There are still plenty of them around and parts are still very abundant !!☺

[@deweys]

Thank you sir! Love your work.

[@huck01955]

Very nice sir :)

[@805ROADKING]

Thanks Mate!!☺

[@grantw.whitwam9948]

Good stuff.

[@805ROADKING]

Thanks Grant!!☺

[@luclatinette]

Are you not gonna paint the carb?

[@805ROADKING]

Nah, this one looked pretty good as is!!☺

[@bduff007]

14:19 it's a dog bolt

[@regsparkes6507]

It won't be long now!

[@805ROADKING]

A few more videos and we'll be rockin' and rollin'!!☺

[@pavementpariah7342]

I feel like most of his videos are him getting frustrated because people are assholes and keep trying to tell him what he's doing wrong. Leave the guy alone.

[@davinlyda1461]

You need to stop using your middle finger to oil stuff

[@805ROADKING]

Subliminal messaging for the Trolls!!☺

[@aserta]

No he doesn't.

[@haatch999]

Split pin on starters not split...

[@BigDeeDee34]

Callum Hatch I was just about to comment that haha lol.

[@joshcrd7925]

He said he was going to do it off camera

[@aserta]

Eh, paint scratches happen, they can be fixed. Even on super expensive stuff. Personally, whenever i do a project, i just leave the paint or lacquer top coat rough. Makes me laugh on TV when they go nuts about some scratch like it's the end of the world.

[@805ROADKING]

The scratches give it character!!☺

[@twocvbloke]

You scratched the paint already? For shame... :P

[@805ROADKING]

Shit happens Mate!!☺

[@BeautyInNature1990]

:)

[@805ROADKING]

☺