Maytag F21 error code fix

[@cwehrfritz3008]

you are a rock star, the easy fix is the cleanout tray, but you can actually remove the 3 phillips screws carefully to remove the motor. In my case the blockage had leaked through the screened filter and then clogged the impeller on the motor. Once removed check the impeller, remove blockage. note there is a circular o ring to seal it, fell off almost missed it when i re-assembled. thx you saved me a service call and and a bunch of money.

[@dominicrazzano2292]

Thanks for the tips. This fixed my washing machine and cleared the error!

[@QuanTran-su7ws]

Thank you for sharing the video. Best one out there on how to fix the lame F21 on the Epic Z. 👍

[@sv4229]

TY for posting I have the Maytag 3000 Series. I got the dreaded F21, cleaned out the white plug, found lots of coins and a pen. Motor next to it is making a weird sound and now I get the "Sud" reading when there's no suds. Guessing I need a new part.

[@earlsshadetreegarage3131]

S v Might be. That’s what my problem was. My guess is that due to the motor shaft bearing going out it caused the impeller not to pump enough fresh water in to rinse it.

[@angelicabrubaker1503]

That black rubber boot has a coin collector like a plastic cup inside of it you need to pull that out of there because that catches all your big things your coins other things that people leave in their pockets you need to get that emptied out and cleaned out because it is going to hamper the water flow for the drain and also some debris can get through that sometimes and maybe damage your impeller

[@nicos.9473]

You tha man! Fixed it with your help thank you!!!!

[@heli400]

I suspect my drain motor went too... the catch tray was not too clogged, I cleared it, and got an F-21 again :/

[@kew217]

This was so helpful, thank you!!!

[@jhern3230]

So... you just bought a replacement part?

[@ed6385]

Yes. The impeller was bent on mine.

[@JuanGomez-uw9qt]

Where did you buy the part?

[@earlsshadetreegarage3131]

I bought mine from an appliance parts dealer locally, but you can find them online.

[@jalea4407]

But you didnt show how you got that bottom panel off

[@jalea4407]

Nevermind I got it! Thank you for posting this... you literally saved me from crying lol

[@mandythomas1688]

Can you please tell me how you got yours off?? I'm having trouble

[@jalea4407]

@@mandythomas1688 I forced it off with a pry bar. I mess it up a little. But I couldnt find any thing else about it anywhere. Sorry I just saw your comment.