Mazda 3 DPF additive tank refill

[@zezebro17]

Thanks for this great video! I need to fill up my Mazda, does the eolys have any specific norm?

[@Bociek22-c3b]

what is the app's full name and where can I get it? for obd ?

[@bboyzzster]

What version of the application, and the license is purchased or not? Because I do not have such an item as a service on version 2.3.19 with a free license.

[@seriously-learntodrive]

I used the paid android lite version. If you use the version for Windows, this is the full version and you don't have to pay for it.

[@LEEWHYTEHD]

Nor me just power train menu. Paid for android app

[@kiralyisten1381]

Hi! Can i fix with this tool the code P1922 - Fuel Additive Level Circuit low ? Or do i have to change the additive tank? Thank you for your answer.

[@seriously-learntodrive]

Circuit low usually is a problem with either wiring, instrument or the computer module. In this case the forscan tool may not help you fix this problem. It is really trying to find were the problem is. It could be an electrical connection, poor electrical grounding etc. If you replace the tank you might still have a p1922, as it could be something else other than the tank.

[@ryanh3285]

Good video , which dongle do you use to connect to forscan light?

[@darshandhonsi9840]

I used OBDLink LX

[@BrianOMahonyPhotography]

Is this the same for a Mazda 3 1.6D Saloon from 2006?

[@missionnad1]

Yes

[@anilkanji4328]

Can you recommend the obd tool your using

[@seriously-learntodrive]

I use the obd link lx

[@anilkanji4328]

Thank you

[@jazzys6143]

Are you okay paji? The last video was 1 year ago. I bought mazda 6 with red oil pressure low warning. Changed the oil any ideas? Any ways to contact you??

[@seriously-learntodrive]

I'm okay. It could be a blocked oil strainer that is located in the oil sump. Check my video on the mazda 6 service, that shows how to access the strainer, but not unblock it, as mine was not blocked. However, you should be able to clean it without removing.

[@jazzys6143]

@@seriously-learntodrive thnx . It’s with the mechanic now. But he said oil stainer was clean. Not sure why they red warning sign it. He’s guessing may be it’s oil pump but the pump doesn’t make any noise? Car has been sitting for while n old oil was very dirty . Only had 54000 miles on it 2014 . Drove it from sales to west London there wasn’t any problems at all (just the warning)came flying all they way . Are you mechanic or just do work on your own cars??

[@seriously-learntodrive]

@@jazzys6143 I just work on my own cars and teach myself how to repair or service them. If I can't do it myself then I take it to a mechanic.

[@jazzys6143]

@@seriously-learntodrive anyways you can help me out on this one?? happy to pay ??

[@jazzys6143]

@@seriously-learntodrive changed the engine oil n filter n light is gone . Happy days 🎉

[@blondinchen1000]

How dir you Connect the app with car?

[@darshandhonsi9840]

Hi, App is connected via bluetooth to the car via the OBD reader. The software is forscan and on their website your can find details for the recommend OBD readers

[@anilkanji4328]

Will the 1 litre be sufficient

[@seriously-learntodrive]

From memory, I used less than 1 litre for my mazda 3.

[@anilkanji4328]

I just rang up mazda and they want over £200 pounds I’m trying to keep cost low and do it myself did you get the P2584 error fuel additive control module requested mil illumination? Also I have had a look at the OBD you mentioned they are quite pricey just wondering weather the veepeak OBD will do the same job

[@seriously-learntodrive]

@@anilkanji4328 the obd is not on forscans website, but looking on KZbin some people have used it with forscan. However , I don't know if it will rest the module, it may do or it May not. I got a check engine light and the same error code.

[@anilkanji4328]

Cool thank you, your tutorials are brilliant saves a lot of money

[@anilkanji4328]

The PAT fluid I can’t see they sell this at Eurocarparts anymore can you recommend any websites or any local stores in Birmingham

[@antohooper6996]

What obd did you say you have?

[@seriously-learntodrive]

I use www.obdlink.com/products/obdlink-lx/ although there are now nerwer models available that may be better.

[@antohooper6996]

@@seriously-learntodrive thank you mate

[@gaz4145]

Thank you very useful video

[@Pfessor_Moriarty]

What obd error code were you getting for this? I'm currently getting p2584 and p242f, was going to give this a go

[@seriously-learntodrive]

I use the obdlink lx

[@rockerholger]

Seems your Video ends suddenly and the last sec before there are still 2 warnings I even have a mazda 3 1.6DE from 09 it is really as meant as it seems and the additive Eolys you use is the okay and is plug PLYG AND PLAY on mazda's Eolys tank and is it safe for me to use Forscan Lite and do as you

[@rockerholger]

my tank is completely empty is it correct what you do I must first Fuel ADD System Prime and afterwards refill the tank

[@seriously-learntodrive]

Forscan lite, has some function removed. If you want more function then you will have to get the Windows version, and if you want further function that are even more intrusive then you will have to obtain the extended licence. So using forscan lite is generally safe.

[@seriously-learntodrive]

@@rockerholger you can do it both ways as it does not matter. As long as you have filled the tank, you can prime the pump as this fills the pump and piping with the fluid. Resetting the refill is there to tell the car that it has been filled.

[@rockerholger]

@@seriously-learntodrive A friend thinks I just need to fill eolys additive on my mazda and pill plus and minus of and connect them then the car engine control should zero itself and I ready to drive ??

[@robertbennett9949]

It is a silly design. The additive tank could have been put in the engine compartment or booth.