After 5 hours i was able to get it done my neck hurts so much but I did it lol .Thank you so much for this video
@downtheshedwithbyron Жыл бұрын
No dramas mate
@masonk1l02323 күн бұрын
Is the loctite a must for the engine oil cooler gasket and red rubber grease?
@downtheshedwithbyron23 күн бұрын
Hello how you going Its up to you mate abit of 515 on the gasket is ok 👌
@masonk1l02322 күн бұрын
@ okay so not necessary if i chose
@downtheshedwithbyron22 күн бұрын
@masonk1l023 id put some 515 on the gasket
@joseorozco86545 ай бұрын
Amazing video! Very well explained, thanks!
@downtheshedwithbyron5 ай бұрын
No dramas mate 👍
@careyanderson5208 Жыл бұрын
thanks mate for showing me the easy way to do this job
@downtheshedwithbyron Жыл бұрын
No dramas mate Its not a to bad of a job but give your self a couple of hours to do it
@ajgileno46732 жыл бұрын
Awesome Byron, you make it look so easy! Sarah & Ingrid (pindari)
@downtheshedwithbyron2 жыл бұрын
Its not to bad of a job the hardest part was trying to keep my hands out of the way for the video haha
@ajgileno46732 жыл бұрын
Your very talented with those hands (❤Ingrid)
@dnasty981Ай бұрын
Where did you get the oil filter wrench? It looks like it makes oil filters easy to remove.
@downtheshedwithbyronАй бұрын
@@dnasty981 G'day mate 1 of the auto shops brought it years ago but gave it away with the car I might have ro part number for it in the basic oil change video cx7
@ddye011 Жыл бұрын
How did you get that last bolt off of the block? The fourth bolt to get the housing off? I can’t get a wrench or a socket on it. It keeps hitting the house. I can’t get access to.
@downtheshedwithbyron Жыл бұрын
I think i used a 3/8 drive single hex 10mm socket or 10mm ring spanning Let me know how you go
@ddye011 Жыл бұрын
@@downtheshedwithbyron gonna try again this weekend. The problem i was having was the socket was hitting the filter housing and wouldn’t allow me to get a straight on approach. Spoke with my brother who works for caterpillar as a chief mechanic and he told me to grind down one of my wrenches. The thickness of my wrenches won’t allow it to get in the bolt. Hope it works. Called the Mazda dealer and they want $1,000 to replace the whole cooler. I told them all it needed was a gasket. Crooks.
@downtheshedwithbyron Жыл бұрын
Yeah sweet hopefully you get iy
@someeric2 ай бұрын
dirty thumbs up! I have a small leak around the CX7 oil filter housing area, a few drops here and there. Not sure if worth doing the job. Does anyone know any negatives if minor leaks are left as is?
@downtheshedwithbyron2 ай бұрын
@@someeric G'day id probably just monitor the oil leak it is abit of a job to do
@bulldogbrett747 Жыл бұрын
Good Stuff .. very well explained - thank you
@downtheshedwithbyron Жыл бұрын
No dramas mate
@Mr.Steve-O Жыл бұрын
Hello, I have a 2011 Mazda CX7 with 130k miles, no issues until I noticed that I ran through 10 quarts of oil ( full synthetic) over 2500 miles. The car is running smooth, no loss of power, no overheating, no oil smell. I did notice some oil around the right side of the engine underneath the engine cover, around the large hose at both ends ( sorry don't know the name of it, intercooler turbo hose ? ) Any ideas would be great, thanks !
@downtheshedwithbyron Жыл бұрын
Sounds like maybe a turbo seal Just take the hose off and have a look
@Mr.Steve-O Жыл бұрын
@@downtheshedwithbyron thx for your reply. There is some oil in the large hose that connects to the intercooler for sure. I took it off a few days ago to inspect it. Tomorrow I will remove the intercooler and inspect that for oil as well.
@austintierney4828 Жыл бұрын
I don’t think I can get that large bolt on top with just a twist of the fingers lol how’d you get it loose?!
@downtheshedwithbyron Жыл бұрын
Gday mate Haha maybe try using a shocket and extension from the top see how you go
@weekileaks23 Жыл бұрын
Does that part fit a 2008 mazda 5? I can’t seem to find correct one? Great video
@downtheshedwithbyron Жыл бұрын
Hello not sure mate
@fotogralex6 ай бұрын
Do I need to drain all the oil when I remove the gasket?
@downtheshedwithbyron6 ай бұрын
Nar can do it with out draining it mate
@josephnavarro3620 Жыл бұрын
Very helpful, thank you.
@downtheshedwithbyron Жыл бұрын
Awesome 👍
@honestreviews686 Жыл бұрын
My CX7 turbo coolant line has shot itself still runs and drives but loses coolant from the turbo coolant line is this an easy fix??
@downtheshedwithbyron Жыл бұрын
Hose replacement easy on most cars Haha on a CX7 its more getting your hands in there
@robertjt2 жыл бұрын
Can’t wait to get my ute up the shed ;)
@darrenmoore22 жыл бұрын
what size is the filter tool.
@downtheshedwithbyron2 жыл бұрын
Hey mate Ryco 04-08 Haha i forgot to put it in the description
@kenethh.8306Ай бұрын
i ask if he drained all engine OiL?
@downtheshedwithbyronАй бұрын
@@kenethh.8306 hey mate you don't need to but would be a good idea to do it at the same time Hope you get it sorted 👍
@kenethh.8306Ай бұрын
@downtheshedwithbyron thanks bro
@downtheshedwithbyronАй бұрын
@kenethh.8306 no dramas
@jrey5676 Жыл бұрын
Hi Byron is $700 fair price for the oil cooler housing? They told me there is a crack and need to be replace
@downtheshedwithbyron Жыл бұрын
Im not sure what they are worth but its about an hour or so job in the shop
@andrewseamans1419 Жыл бұрын
Is this the 2.5 or 2.3 Turbo?
@downtheshedwithbyron Жыл бұрын
2.3L mate
@andrewseamans1419 Жыл бұрын
@@downtheshedwithbyron thanks from Massachusetts USA. My daughter had the 2.5 looks to be the same oil cooler setup. The video is helpful.
@alexvarela4605 Жыл бұрын
Very nice video. Thank you
@jasonden100510 ай бұрын
Great video mate.
@downtheshedwithbyron10 ай бұрын
Cheers mate 👍
@felipemoya9992Ай бұрын
Thx mate
@downtheshedwithbyronАй бұрын
No dramas mate 👍
@daretowatch72142 жыл бұрын
Helpful
@donaldhalls21892 жыл бұрын
Dirty 👍🏼up
@blazonemore2 Жыл бұрын
Toss that junk. And get the updated oil filter housing to use a regular screw on filter. Is what you should have been showing.
@downtheshedwithbyron Жыл бұрын
Thats a mint idea mate Have you got a part number or good brand you would recommend Cheers Byron
@blazonemore2 Жыл бұрын
@@downtheshedwithbyron L311-14-311A there is a few different part numbers all the same part. eBay has them the cheapest probably. About half what the dealership would want.
@blazonemore2 Жыл бұрын
@@downtheshedwithbyron 2010 and newer I think they stopped using the cartridge style