McCormick International B46 baler repair (Part 2)

In this video McCormick-International B46 bailer (part 2)
I put twine tension device in the chamber where the twine is stored , the tension of the twines on knotters must be from 2 to 10 pounds. I changed the old knifes with new ones and took the measurements from the twine knife and twine - dist is 8mm or 5/16 inch. And from blade of the knife to slot on twine disc must be 13.5mm-15mm or 17/32 to 19/32 inch.
Then I put two new springs for hay dog. I also undo the nut on bill hook so the knot can be released much easier. I put the baler in the knotting position so the needles were raised up where the knotters are than do the measurement under the baler from needle guides to needle tie pipe and must be around 20 millimeters or 3/4 +/- 1/8 Inch.
-Part 1 of the video how to repair McCormick International baler B46:
• McCormick Internationa...
Baler manual book:
agmanuals.com/collections/int...
If you like the video please give a thumb up,
Subscribe to my channel and don’t miss other new repairing and farming videos that I will upload in the future.
Subscribe to my channel Mark the farmer here:
/ @markthefarmer
#Markthefarmer #McCormickB46 #InternationalB46 #b46 #reparing #repair #hay
#haybaler #haybale

[@haweater1555]

New twine knives (part # 668962R1 ) are too expensive. Luckily before my dad passed he bought a box of parts at a dealer closeout auction. It had a bag with several of these - a lifetime supply for me. I have a later model 430 "All Twine" which uses a cam linked moving knife that uses the same blade.

[@markthefarmer]

Yes they are.. Some put razor blades and it works beatter than stock

[@nigelraymond7]

Yes at first I've had a lot of trubble and it, one knife not cutting until I did your video thanks very much

[@markthefarmer]

Happy for you have a good hay seson 👍

[@davydacounsellor]

Thanks mark show knifes cheers from Ireland

[@alimughal8570]

Nice information Mark....

[@serviceslogging]

Thank you, very educating 😊

[@markthefarmer]

Happy that help you

[@ernestorohner6996]

Exelente muy bueno!tendrias que empezar hacer la parte 3 con la maquina en pleno funcionamiento!

[@markthefarmer]

yes soon :))

[@user-cr3hf3mh1o]

Hi. Thanks for your informative video. We have a problem with our device regarding the correct timing of the knifes no matter what we do, it either cuts the robe early or it comes to late. Can you tell us the correct setting or any idea how to set this up?

[@markthefarmer]

Hi thanks for watching and I'm happy that video help you.. You shud go to my channel and look for video how to time mccornick bailer... you will get all the info in video on how to time it. I dont own that kind of bailer any more for a few year now...

[@gerardrochford8994]

Hello my father bought a new B46 in 1965 it was the best baler we ever had .we had B47 and 440 and 445 all international. Would love to buy a B46 if anybody had any knowledge of one for sale.

[@markthefarmer]

yes i belive that the international put a lot of knolege in B series for that time... but sorry i dont know any one who selling it right now...

[@radoslavradojkovic1110]

Ja sam iz Srbije pa me interesuje kako bi mogao da dodjem do takvog uputstva kako imate vi.Da li bi mogli vi nekako da mi pošaljete spreman sam da platim kolko treba.Bio bi vam neizmerno zahvalan.

[@markthefarmer]

Hi i dont have this book any more.. i give it away as i sold the bailer... i find this on a web side.. try to type mccormick b46 owner manual book pdf it may find some thing

[@radoslavradojkovic1110]

@@markthefarmer Hvala vam

[@nigelraymond7]

My bales are alwase lose I'm still not sure how to tighten the bales, cheers

[@markthefarmer]

Does the baler make the knot ?

[@goranraskovic9393]

ADJUSTING IGLI INTERNACIONAL B 47

[@thelaruefamilyhomestead]

Where did you get your knives from? Great video, lots of help!

[@markthefarmer]

I bought them online on this web they sell worldwide www.balerparts.co.uk/parts/manufacturer/International-baler-spare-parts?page=4

[@goranraskovic9393]

KAKO SE PODESAVAJU IGLE INTERNACIONAL B47

[@markthefarmer]

Za B47 nebi vedel ker gre za drugi model kot je moj B46

[@natum5582]

Hi man , i from Moldova please tall me how can I buy spare parts for B46, if maybe I want to talk to you.because in my couture no spare parts.

[@markthefarmer]

Hi. You can't buy new spare parts any more because they dont make it... If you found some used in good condition or repare old ones. What part do you need ?

[@markthefarmer]

If you like the video please give a thumb up, Subscribe to my channel and don’t miss other new repairing and farming videos that I will upload in the future. Subscribe to my channel Mark the farmer here: kzbin.info/door/piqU7ikeaIBfWSa0itwcdQ

[@aafarms6554]

Can you show me how to feed the twine?

[@markthefarmer]

Yes I will do a video on that till weekend Do you mean from twin bale to the knotters ?

[@aafarms6554]

Yes

[@dankoloncar7134]

Na koju nacin mogu dobiti upustvo za b47. Unaprijed hvala!

[@markthefarmer]

I dont know.. try to find it in google by mccormick b47 owner manual some think like that

[@dankoloncar7134]

@@markthefarmer hvala na razumjevanju, pokusao sam da nadjem ali nisam uspio. Upustvo og b46 je slucno kao b47.

[@markthefarmer]

@@dankoloncar7134 b47 it a bit differend than b46, because b47 is newer model-jounger than b46.

[@Marek20092]

where did you buy knives?

[@markthefarmer]

I bought them from UK online page, but i can t remember what was the name of the page any more

[@phariskahara6493]

Hi. Seal part number please. Thank you

[@markthefarmer]

Sorry but I dont own a bailer any more for some years now and dont have any serial numbers...

[@mohammadmetwally1153]

Can I get the manual please

[@markthefarmer]

Hi I don't have it any more, I give it to new owner.

[@mohammadmetwally1153]

@@markthefarmer thanks a lot

[@sebyblaga968]

Can you send me the manual by email?

[@markthefarmer]

Hi you can download it from ther side agmanuals.com/collections/international-harvester/products/international-46-twine-baler

[@sebyblaga968]

You can send me some pictures with the manual on the device. I'm from Romania

[@zhuk5873]

Вышли в Украину таку кныжку

[@markthefarmer]

I think it was published in most languages wher they sold the balers