Mclaren Wanted $100,000+ For A New 675LT Engine...I FIXED Mine For $5 (Then Made It WAY FASTER)

[@Dipierox]

Tavarish : I will need two people Jared : Hi, i'm two people :D

[@wilbur6089]

😐

[@strain121]

heavily suggesting Tavarish is USELESS.

[@timbattle3415]

Jared is on point with the dad jokes

[@Φλωρος-Θωμασου-Ξ5Ξ]

@@timbattle3415 he's just one walking dad joke, must be a really great dad

[@justinbouy3153]

strain121 It’s not that Tavares is useless it’s just that Jared is a beast

[@tjernst6315]

I laughed way harder than I probably should have at Jared's pressure test...

[@PapaVrooom]

You are not alone...

[@dirkfulkerson4110]

The Jared pressure test was awesome! Tavarish you got to keep him around for another day or two at least. Keep up the amazing content gentlemen!

[@brokearse2011]

Play it back at .25 speed....

[@Soca47]

Jared is super talanted

[@motobikemike914]

10:06

[@BarryAllen-pd1jv]

Tavarish: "the turbo will make a liiiiittleee bit more power" Me : *thinks around 20-50 hrsprs Tavarish : *eIgHT HuNdrEd h0rSep0wEr*

[@cdrchrrs]

The number 800 went through my mind when he mentioned the turbo and spark plug upgrades, but I thought I was too conservative.

[@cdrchrrs]

The number 800 went through my mind when he mentioned the turbo and spark plug upgrades, but I thought I was too conservative.

[@spicysnowman8886]

@@cdrchrrs deja vu

[@LokeGson]

Ken Norcott did the engine break tho

[@mangotail6808]

As Tavarish kept saying over and over again. Its stronger than factory.

[@chrisfix]

That part where you used the red threadlocker tho!

[@tavarish]

Soapy Wooder 4 lyfe

[@SpoiledMilk11]

Ok real question why does red locker smell soooo good almost like a cherry

[@penguinstalker1238]

Who else just saw @chrisfix's story

[@photondebuger45]

Hehehey I found the comment lolz

[@supra9301]

@@SpoiledMilk11 threadlocker has saccharin(artificial sweetener) in it.

[@FosterKittenFarm]

I like the way Jared is always smiling, like he is always enjoying what he is doing. Great guy!

[@lostalone9320]

The smile of a man who just hand-tapped a blind hole in a 200k engine, like an absolute boss.

[@ginsmithrow9611]

This guys a magician, he points at things and they go out of focus.

[@ginsmithrow9611]

It's my only criticism, I watch yt on my tv and it's very noticeable. 👍

[@jagritahuja]

Jared actually does two peoples worth of work. :D

[@tavarish]

and then some

[@abalakrishnan4152]

@@tavarish and then some more on top of that

[@RonHaslam2001]

McLaren engineer: you’ll be fine, whatever didn’t come together, just glue it.

[@ernestbeggle1981]

I'm hearing that in The Critical Drinker's voice, "Nah, it'll be fine!"

[@bryz5232]

Loctite it maybe

[@samtheis5931]

Hey Tavarish, to make your epoxy repairs look better put a piece of painter's tape over the top of the repair while the epoxy is still malleable (sticky side of the tape toward the epoxy) and smooth it out with a flat edge tool or your finger. Once it has cured, the tape will come right off. You can also use the painter's tape to create a dam if you need to build up around the repaired area. Take your time and the repair will look great.

[@TheReinoPaasonen]

Thanks for the tip!

[@soulfly3438]

neato mr random viewer!!! ummm one question... how many of your builds have been shown at sema? hmmm maybe you should wisely stay in your own depth. the absurdity of some rando telling someone who has famous builds how to do his job. lmaooo. there is just so many clueless dip...... on yt who just know it all. lmfao

[@logankeneth5237]

@@soulfly3438 It's just beyond stupid and ignorant that you are suggesting that someone can't offer tips to someone over the internet. AND to top it off you picked a comment that was liked by the guy the tip was for, lmao. time to turn your screen off and look at the refection for the clueless individual.

[@BigBadLoneWolf]

@@soulfly3438 you are never too old to learn, and you dont know everything is a good way to think, and it is very hard to make an original mistake

[@mattbritton6222]

@@soulfly3438 I know right? Clueless dips***s who know everything. Would you believe there are people who would ignore and disparage freely given advice because they think they already know everything.

[@tjroelsma]

McLaren: You can't fix that engine, it's way too complicated. Freddie & Jared: That sounds like a challenge.

[@62saki91]

i think you mean jared.. yeah it's all jared..

[@BlargMyShnoople]

can't wait to see this thing finished, good luck on the rest of the build!

[@danilorocha9962]

I wasn't expecting to see you here.Love you ❤️🇧🇷

[@Bergur191]

How’s the C63?

[@kingkungk6146]

A suprise, but a welcome one.

[@davidkelley751]

BLARG I didn’t know you were into cars. I created a whole other account to watch cars. On my main account I watch you and the boys. A surprise to see you here, but a welcome one for sure.

[@Thors_Son_Gaming]

Definitely was not expecting to see Blarg here. Literally just finished watching your latest and went to KZbin home and clicked this lol.

[@Djoki1]

Cant wait to see the car finished in like, 5 billion years Jokes aside, i hope everything goes as planned. Wish you luck.

[@micaharies]

it's much better than some of his other projects *cough* bentley *cough*

[@HksF16]

@@micaharies Mercedes

[@BarryAllen-pd1jv]

Why did I read this ‘ wish you fuck ' I didn't mean to I'm sorry I'm guilty now 😭☠️

[@freakymrq]

@@micaharies but the bentley has been done for 4 months? You can literally buy it lol

[@mch0lic]

BOM fellows quietly chuckle in the corner.

[@mikebiron7339]

I can't say enough how perfect you and Jarrad are as a team on this channel. Do not screw it up. Get WED up with sub's and views so Jarrad can have that channel, and the two of you continue as the powerhouse YT team you are!

[@pengu4932]

Tavarish - This is a 2 person job! So I enlisted help. Jared - Hi, i'm 2 people. Made my day LOL

[@samliu9351]

Can we just give some credit to Jared for a such a good friend that he is?

[@zach9767]

i think this channel should be a part of everyone's daily routine. good builds, good commentary, keeps your attention not just a build. keeps everyone watching involved. thanks for the vids tavarish ive been here since the gas pump gallardo.

[@zach9767]

@Copter Cop THAT'S WHY WE COME BACK BAY BEEEEEE

[@YourOnlyDrivingAsylum]

Everyone needs a Jared in their lives ... absolute mechanical genius and hilarious more times than he is given credit for !!

[@christopherheynes6774]

Sny jou naels asb my bra. Bud you doing a good job

[@vanillagarilla965]

I have been an auto repair technician or mechanic for over 24 years and just once I want to do something like this for fun , because when you want to do it instead of having to do it is a totally different story. Thanks you guys for giving me motivation to do a job for fun.

[@jcc3494]

If this was a Ferrari, he would've had a cease and desist by now

[@Jr.Ronnie]

BIg facts

[@devinbaker8707]

I feel like people who buy McLarens know they're not built....fantastically.

[@mihan2d]

To be fair they didn't deny Samcrac the right to rebuild his salvaged Ferrari. Maybe just because he's a smaller youtuber and kina flew under the radar, or is it just that Ferrari get pissed off whenever someone tries to *modify* their car...

[@jcc3494]

@@mihan2d ferrari have a reputation of being a bit difficult to deal with and have given a few cease and desist orders for "modifications" one of which was actually just a wrap

[@ralphinator2]

This is why Ferruccio Lamborghini decided to do his own thing.

[@zacaea1583]

Love how this came up in my recommended after the recent oil/piston delete.

[@vuklozo]

Ad on Cars and Bids: Never been in a collision, original paint.

[@dularar8934]

lmao , but Doug is honest

[@killerdinamo08]

And matching engine and transmission numbers.

[@juancarlosmartin4690]

You need to fix your jokes bro...

[@B7films]

Is it weird that I’m literally watching people work in a garage, whilst eating ramen, after a long day of work at the garage?

[@derrickthomas5686]

Nope true gear head things 💪

[@HeliNomadic]

Nope, totally normal.

[@62saki91]

used to do the same thing.. until i got burned out from stupid management. now i work in IT, and watch gearhead videos.

[@lacrosse1157]

The addition of Jared to the videos is great. His sense of humor is so damn funny

[@hyndass]

Hi guys, just noticed, after welding aluminium pipe end 9:34, will it not be causing any water turbulences with that inner edge? I've seen some plumbing video on KZbin and that guy explained why the pipe should be smooth inside to not causing any obstacles in water flow when soldering joints. So in my opinion I would smooth that inner edge after welding... But good job as always to both of you..

[@trezsr]

Thank you for saving this car, especially when the manufacturers build them in limited quantities and then some rich asses pretty nearly destroy them. I love that you get content from working on these (and I enjoy watching), but, more than anything, I love more that you're saving them.

[@RobinDale50]

"we just touched the ratchet, and it squirted." Well that's how you know its a keeper

[@johnasbury7511]

That's how you know the cars enjoying itself

[@leroirobinson-grant5885]

Lmao!!!

[@AGuysGarage]

Love you guys, even though I am a little jelly. Getting started on my dream of doing what you guys are doing. Been dreaming about it for 15years. No shop, no garage and so on. Done TONS of work to other peoples vehicles and my own, enough in fact that i would probably have a decent repair channel by now if i would have recorded it. Now I have a shop, getting electric in it soon. Back is out and I may be past my prime, but im giving it a go damn it!

[@mekishi4800]

*Tavarish 5 Years Later:* *Buying the First Wrecked Bugatti Chiron!*

[@MrChaudhryy]

There are 5to 7 wrecked Bugatti chiron

[@takigosciu]

He needs to get the viral flooded one

[@WhosManIsThis]

@@takigosciu pretty sure he did and sell it (Not chiron but just veyron)

[@takigosciu]

@@WhosManIsThis someone for sure did see it for sale, there was a vinwiki episode on that one day, but thats so long since i last watched it that i have no idea who hosted that one. And yeah it was a Veyron

[@henrycollins2478]

There was one in like Switzerland I think

[@Horizon1722]

Damn youtube rubbing salt in the wounds with this recommendation 😂😂

[@71ala]

The most insane rebuild project ever! I love it. These modern supercars are so hugely complex, it's usually cheaper to scrap them than to rebuild them. Great job Tavarish for proving McLaren wrong!

[@justinbouy3153]

Jared is that guy who has 20 years of experience by the time he’s 12

[@devinbaker8707]

Every car guy knows that one guy.

[@justinbouy3153]

Andrew Norris there is no way in the universe he is only 20

[@blackoper1999]

@@andrewnorris5415 20?????? im older than him??? this man builds cars and i don't even have a license yet

[@leroirobinson-grant5885]

Lmao!

[@justinbouy3153]

XTWCTheWanted i looked him up online it says he’s 36

[@i_am_knuckles]

Jared's the man, without him Tavarish would be lost

[@vikingman4614]

Tavarish has gotten a lot better since teaming up with Jared half the hands doing the work is Tavarish's

[@justinamon4862]

They are a good team together

[@Edde2016]

Agreed... I think he should build a car for Jared.

[@johnbearjunkyard]

Using a super car engine to squirt oil across the shop. This is the quality content that I come here for 👍

[@jellyman6669]

Came for the build, left with a squirt joke. I’m glad he didn’t yell “She’s a squirter”... displayed some restraint there.

[@Gheko_One]

"Hi, I'm two people" Jared, 2020

[@rhiantaylor3446]

Great to see you making real progress - good to see you repairing rather than replacing, avoiding or at least minimising the supercar spare parts rip-off.

[@MassProject]

Can't wait to see this one running!!

[@joey1_]

Should have used lubrican not lubrican't

[@abalakrishnan4152]

Sounds like a joke my dad would make

[@Make-Asylums-Great-Again]

Joey Echols I’m a Mexican not a Mexicant 👍

[@vk849]

Thissss is the most exciting rebuild on KZbin 🔥

[@rogerbussiii]

Im gonna speak for everyone, we are so stoked! This for me is the best series you guys have ever done, or anyone for that matter. Never been so excited to see a car done, and ive been here for a while.. this is quite an undertaking, and we are all so glad your taking us with you. Thanks.

[@CLCIII]

When you get done with it you DEFINITELY need to badge it as an 800LT. You deserve to have your own model of McLaren after taking on this project that NO ONE else would attempt! Great job Tavares!

[@MobWithGuns]

Jared is the Johnny Sins of the automotive world with that squirt he made

[@wurkinjowurka9026]

More like Ron Jeremy 🤣

[@steveyj75]

Peter North was the Champ

[@poornaraj1726]

For anyone wondering what music that was- in the beginning it's "dvine - unknown reality" and in the ending it was "dvine - confessions"

[@AccGrad2012]

I need the part number for that pressure tester. My wife says it reminds her of me.

[@CyberlightFG]

Don't pressure test your wife

[@daviddetweiler7658]

Brian from BNR is a gem to the turbo car world. He's been around a long time and still rebuilds and even provides love for the old 80s RX7s after all these years.

[@davidgarratt9632]

Just want to say this. When I first started watching your videos I thought you were just some rich kid without a clue but you are getting into it and doing the "outside the box" repairs alongside the required "new part replacements " that are needed. If I was in a financial position to rebuild a supercar I'd be doing pretty much the same. Good work mate.

[@borisvbrknex]

no one: absolutely no one: Tavarish: 'ah! it's almost in!'

[@sawilson56]

Theresss the comment

[@hipster_tacos]

"It's probably stronger than the original" seems to be the theme of this build lol

[@bgsound2721]

Jared's so laid back about everything, it's really subtle humor.

[@tjmoneybags]

I like when Jared is on here too. you guys work well together. you can have fun but get great stuff accomplished too.

[@Gerhardfjvr]

17:38 here's the $5 fix

[@Nik-do1wd]

I remember thinking you plasti-dipping your s class was ambitious...

[@Cultureshockcrew]

Underrated comment

[@Toastmaster_5000]

I went from doubting this could be completed at all, to impressed by how much progress has been made

[@tomthumb1322]

Jared knockin' it out of the park, as usual.

[@MikeBanks2003]

Instead of welding aluminium. cut off leaving a spigot, turn a thread on it, then tap the end of the piece to be fitted. Use an epoxy thread locker and screws both parts together. No heat and super-strong. Marine engine trick.

[@blackming3420]

I'm really enjoying this series because the P1 is on hold😂😂❤

[@BasicFolders]

I don't know who this Tavarish guy is, I keep coming here for that Jared fellow... OMG imagine having a buddy that knows THAT much about everything. 😊👍

[@dflynn2486]

Yeah, every guy with a shop knows how it is to have something in a zillion pieces and then that friend who knows tons of technical stuff walks in with a "oh this ain't no big deal" kind of attitude. It can be like being rescued from a deserted island. Edit: even if you know what you're doing, having someone like that around makes you 40% more capable. At least.

[@BasicFolders]

@@dflynn2486 PLUS he's funny. 🤣

[@MichaelNdubishi]

Hi, I'm from the future, your engine you fixed for $5 exploded. XD

[@kucingmiumiu854]

But think of the entertainment value tho…. He probably can monetize if for more than 5 dollars.

[@stevehudson2157]

LOL, Jared is awesome! "Sounds good to me!"

[@stevem6853]

I sure am enjoying these videos. A million years ago when I was a kid, my dad's friend had a Rolls that had low miles but kept overheating. The dealer wanted $20,000 to fix it (it'd be a lot more now), so he took it to a reputable local garage, they flushed the cooling system and replaced some hoses and the thermostat, and educated the Rolls owner about using distilled water with coolant, not tap water. Total bill was under $1,000.

[@mauricejones3387]

Great to see you guys showing that a engine is an engine. When I was a teen I worked in a English Sports Car shop where a guy let me learn by doing. I did my first paint job on a TR4 and had to completely start over on the door panel because it ran so bad due to being too close, etc. We also rebuild a Columbo V12 Ferrari engine, or should I say I did alone because he had a XKE he had to finish painting. It was fairly straight forward and fun to do and ran beautifully and strong. This build might seem scary but if you have ever worked on a 1973 Jaguar V12 engine you can work on anything.

[@danchesney631]

One thing I’ve noticed, about these fast talking loud mouthed more money than brains car channels, is that there’s always a calm level headed guy doing all the work.

[@TG22222]

You mean like how Adam LZ just stands around talking while the other guy does all the work?

[@dph49]

can you explain the "more money than brains" part because honestly these two guys are some of the most talented people youtube have the chance to work with.

[@danchesney631]

@@dph49 Just look at the title of the video. $5 is an obvious lie, as well as click bait.

[@twotwocold]

@@danchesney631 right💯

[@dahobbs2008]

Does anyone else love the fact he is taking apart a McLaren with a ryobi impact? Lol

[@looloolama]

Homeless despot exclusivley please

[@dashjackson]

And reassembling it with a harbor freight ratchet.

[@tstricklin4808]

😂✌

[@OtherDillusion]

close your eyes and listen to when he says "Gentle, Gentle, Gentle!... its almost in"

[@alandallas7912]

And then engine squirted... all over the garage.

[@OtherDillusion]

@@alandallas7912 yaw

[@kdgckg]

“It’s not pretty in some spots, but it exists…” Great quote… 😂😂😂

[@Obsession_OBS]

A real car guy at heart working and building it himself really takes you back to the good days

[@wildboy11180]

Imagine using flex glue for the roof... [McLaren approves]

[@ericlion744]

hoovie approved

[@ratuldeoun7228]

When is CarTrek 2 Episode 1 coming out?! We been waiting for so long!!

[@demonkingak1755]

Yes we have been waiting long. It's almost like there's a worldwide pandemic that's slowing down production.....

[@tavarish]

Hopefully Friday at noon EST

[@Kxji]

I think I saw an Instagram post by Bolian or Tavarish and they had the hashtag #ChristmasSpecial

[@anubhavbhattacharya6216]

@@tavarish oh wow. That just made my Friday better, on top of it being a holiday in my country. Not that work would have stopped me watching CarTrek tho😉

[@yoboibrodie8735]

I wish it’s jdm a version.

[@leangaming6967]

I am starting to think Jared is the master and Freddie is his assistant.

[@jorgengabrielsson6660]

Don’t think... it’s a fact 😊👍🏼

[@BryanRWNickel]

This is the most ambitious project I have ever seen. How you’re not absolutely terrified is beyond me. You’re a legend bro.

[@kdgckg]

Harbor freight has a nice easy vacuum hand pump, works great for sucking stuff out of holes, it has a small container that goes inline with the hose… Wish I could find mine…lol…

[@revmedia8108]

*flex tape* Much love, your friends at Rev Media!!

[@themotorsportdreams3946]

Rev Media why are you everywhere

[@misfits010]

I love Tavarish's optimism were any small fix is always "stronger" and any little upgrade gets you to "1,000 hp" , love the vids though.

[@NotMeTF]

Ah yes, just place a 5 dollar spoiler from ebay and you get 200 extra horsepower.

[@Thewiz729kdojdj]

the amount of times they say "its actually probably stronger" could come back to bite them if the engine blows lmao

[@opieg7333]

There are only a handful of ways to "blow" an engine. Of the repairs they made to the engine block, most were to fix mounting points and in theory should not result in a failed engine, unless the repair process overheated the block material and messed up the metal's structure (something they discussed in an early video, so I am betting they avoided doing that). The one repair that will be a little more sketchy in my opinion is the water pump neck replacement. There they noted the casting seemed to have some inclusions and given the heat cycles and vibrations that part will see, it is something I would always be worried about failing. Now if you blow the water pump collar and fail to shut the engine down quickly, that could fry an engine. But overall, most of those mount points should indeed be stronger than the original casting. I do however worry that the block may have suffered either micro fracturing or warping during the crash - something that might shorten the lifespan of the engine especially if pushed hard. But that is a worthwhile risk, since a replacement motor is probably $50-60K, maybe more given it is a 675 and there are only 500 correct numbered engines in the entire world.

[@SuperPhelix]

@@opieg7333 Title says a new engine is $100k+ Other than that I completely agree

[@opieg7333]

@@SuperPhelix I have been watching parts sites for a long time. $100K is a ballpark number for a new engine from McLaren. Unfortunately take-out 675LT engines do not come up often. (I believe I have seen 2 over the years on ebay/co-part or similar, which is why I an very curious as to how much of each model's engine spec is hardware changes). Regardless, the closest analog would be a 650s engine and those are running about $40K for a complete unit. (You might have to wait forever to find a actual 675LT engine). Add on shipping and the misc. parts, install and reprogramming and you get to around $50K, assuming you do the work. There is a 650S engine on ebay now for $38.5K in the UK which appears to be pretty good shape, BUT, such engines never get listed unless there is a reason the car no longer comes with it... Personally, I am waiting for a nice M840T to show up at the right price once these 720's start getting salvaged out due to the step depreciation curve on McLarens.

[@SuperPhelix]

@@opieg7333 Oh, cool! And good luck! I hope you find what you're looking for at a reasonable price!

[@zeddieb5150]

Wow! How have I not found your channel till now? The slow motion is absolutely on point. How often does anyone get to see an entire Mcclellan engine? Super cool.

[@deltacharlieecho4732]

I bought an 04 x3 for $600 recently. I'm going to put about another $600 in parts into it to get it fixed and running right off the bat. Already lapped the valves, assembled a new head, pulled the timing cover, and ordered missing parts including an upgraded throttle body and clutch pedal for future shenanigans. When the head goes back on the engine it will be accompanied by a gt35r turbo with a top mount manifold. Going to start it at low boost, 5-7psi, and make sure that everything is working properly then I'll start the hunt for a manual awd trans and start figuring out how to make a switchable awd/rwd setup then put in a higher pressure spring. I love watching people build cars better than the manufacturer intended; I look forward to more videos on this.

[@justsomegarage]

I now cant look at any 675 without thinking "DAM SHES A SQUIRTER" thanks to this comment section Thanks guys 😂

[@timbattle3415]

Jared with the John Wayne Gacy smile, lol perfect.

[@dajerseyrat]

I guess this video didn't age well . 😂 That engine exploded eventually

[@AntCooke]

This project is so good. Also, Jared has some amazing knowledge and skills. Seriously impressive.

[@BrianLovesBeefCurtains]

Hats off to these amazing manufacturers for building these beasts, and you guys for daring to fix them!

[@doug3512]

This video aged well... especially after he blew the engine to pieces. "How hard could it be?"

[@seankelly5469]

I've been subscribed forever, I click like on every video you put out, but I'm not really one for expressing myself in the comments. I do realize however that it's important for the KZbin algorithm so here is a bunch of words for you that I hope other viewers like me will click 👍 on to help support you tavarish. Keep up the good work and we always look forward to your next video.

[@user-nl9nn]

Me: I detailed my front bumper this quarantine Tavarish: Same here bro

[@Not_really]

Lucky you. At least you knew what you were doing! I tried the same thing with my rear bumper and ended up paying professionals to right my mess-up. Lesson learned. I'm sticking to my day job - teaching !!

[@dustinauclaire1813]

Wow I thought you were in another shop for a minute, you cleaned your room. We are so proud of you.

[@bryancohn9406]

Having had an injector fail and hydraulock my Sentra SER race car I was dying laughing at the oil squirting across the shop! Jared gets a cookie for distance!

[@billh230]

"...when you drive a car like a grandma..." Which, of course is why the car was totaled in the first place.

[@Shanknwank123]

Freddy the type of guy who doesn’t want trouble but can’t live a simple life. That mclaren will be fire when it is done

[@loggerhead837]

A more expensive version of hoovies Ferrari

[@CannibalSoggoth]

like a true british car

[@LPKelly380]

Great news for all of those single mothers out there who just can’t afford to get their 675LTs fixed.

[@nickpeall]

I dont have a car, nor can I fix engines, yet here I am watchin and subscribing. This dude is just fun to watch 😁

[@jonathanfairchild]

Can we just stop and appreciate Jared and his mad aluminum welding skills for that engine mount? Like that looks exactly factory!

[@mablizza]

Rebuilding turbos, Jared's time, parts, none of that looks like it cost $5...

[@tomlynch7097]

thank u

[@YellowBoy305]

FACTS!!! 😂

[@bunchacrybabies]

Click bait!

[@peterweller8583]

I do not know this but I think he was referring to the cooling fitting.

[@YellowBoy305]

@@peterweller8583 Probably 😂

[@williambarrineau7153]

When you tell her you work on cars. Her: “that’s cute” When you show up with that McLaren you have been working on. Her: 12:34

[@madern7]

H Barri this is such an underrated comment I can’t even 😂

[@williambarrineau7153]

Madern 5:58

[@aidenanderson4343]

Loving this series

[@johnny_wrench]

21:03 Tavarish showing off his skills as both a mechanic and a plumber.

[@abhudayanagar5986]

jared is so freaking knowledgeable in technical terms and hands on both. respect

[@sully1501]

After watching this, doesn't everyone wish they had a Jared handy 😅😃

[@MrGothicruler666]

12:33 *Cytheria has entered the chat*

[@StewChicken42]

"You wanna go for distance now?" 🤣🤣🤣🤣🤣

[@aipsong]

Great fun - as always - and excellent video footage - otlichna, tavarish and Jared

[@glassvial]

5:59 you just gotta love that big Jared smile!