I Bought A WRECKED 800-HP Supercar You've Never Heard Of

Check out AutoBidMaster at►bit.ly/abmtavarish and use coupon code "TAVARISH" to save $50 on signup! Thanks to AutoBidMaster for sponsoring this video!
--------------------------------------------------------------------
Check out the RCR SL-C here►bit.ly/superlit...
(Tell them I sent you if you decide to buy one)
--------------------------------------------------------------------
Today I unveil the other part of my biggest project ever - a Race Car Replicas SL-C supercar with an insane engine that has seen better days. What did I get myself into?!
--------------------------------------------------------------------
Subscribe! ►bit.ly/2xZGtYN
Instagram ► / therealtavarish
NEW Tavarish shirts and merch►www.bunkerbran...
--------------------------------------------------------------------
Questions? Comments? Business inquiries? Email me at [e-mail]
--------------------------------------------------------------------
My Equipment:
Teng Tools 715 Piece Mega Master Tool Kit - TCMM715N►amzn.to/2Lp0f4W
Simiron Epoxy Floor Coating►simiron.com
Bendpak Lifts and Equipment►bendpak.com
--------------------------------------------------------------------
Music used in this video:
NIVIRO - You [NCS Release]► • NIVIRO - You | Future ...
Music by Joakim Karud ► / joakimkarud
Fredji - Happy Life► • Fredji - Happy Life (V...
Malik Bash - Ghosts [NCS Release]► • Malik Bash - Ghosts | ...

[@dan.r9220]

Tavarish: This has a 3 rotor *Rob Dahm has entered the garage* Tavarish: The Frame is Cracked *Chris from BIFB has entered the garage*

[@martinkeeling960]

Tavarish: haltech dash and ecu MIGHTY CAR MODS COMES THROUGH THE DOOR

[@n3lee]

Just get SamCrac to come over and smear some JB weld on it, it'll be good; or invite McFarland Engineering over to LS swap it.... FL has so many possibilities!

[@vinodnair4358]

I cant 😂😂😂😂😂😂

[@chimortrufia6460]

Looks more like super trash car

[@Twizter68]

Tavarisch: it needs a lot of bodywork Goonzquad has entered the garage

[@vjabonador1067]

Keep the 20B, that's goddamned rare engine that deserves to go back in the road and keep powering a car.

[@sam._.buswell8181]

Tavarish: the last guy didn’t have the talent required to drive the car Jared: *looks nervously at Tavarish*

[@xslxm]

😂😂😂

[@indianapwn3s]

I guess we know the real reason he doesn't drive his Gallardo.

[@allangibson8494]

And not enough wisdom to recognise the fact. Lacking ability is rarely a problem if you know your limits.

[@gelynch52phPH]

I'm thinking you should keep the rotary. They are so rare that it alone is a conversation piece and the sound it makes is insane.

[@ATAATX]

There is a reason why they are rare. They were junk.

[@ScoobyShotU]

@@ATAATX lol yeah ok... I mean definitely depends but it depends with most cars tho..

[@ATAATX]

@@ScoobyShotU Why do you think they were discontinued? They were junk. Too many problems they did not foresee and it was more cost efficient to just stop making them rather than spend all their time, money and efforts rebuilding them. Since then private concerns have managed to find ways to improve the rotary, but there are still some issues with them.

[@pursuitforspeed]

​@@ATAATX What doesn't have issues? I thought they were still going to produce it as a generator on their BEV. I personally understood that the main reason it's been discontinued for vehicle power plants was due to poor emissions and fuel economy. Sure, the RENESIS was junk due to the design changes they made to meet emissions standards. Overall though, the whole "Rotaries are unreliable junk" is a bit of exaggeration. Look after them and they are more reliable than most people think.

[@ATAATX]

@@pursuitforspeed Blow by, and they could not economically fix it nor did they know how.

[@H4mAdAr4]

Tavarish: "I'm gonna build the first mannual transmission SLS in the world!" Also tavarish: "Guys i've bought another car!" SLS: *sad V8 noises*

[@GaIvatr0n]

Haha Yeh, I think the SL project is a little too boring and played out now. I like the new direction.

[@blulian]

He's been saying that for years lol. But from a business standpoint, what he's doing now will get more views/revenue. So i kind of understand. (I'd rather see the manual swap SL) typo* my bad

[@regal105]

The Bentley has disappeared into nothingness as well

[@greenfailsshow9317]

*SL

[@aquakarn]

First thing I thought of as well. The new direction is fun, but far from where this channel started. It’s now pure entertainment. Which is fine, but not sure I’ll keep following. Wrench every day? Not so applicable.

[@r3sonate]

Dahm lying dead in his garage is maybe the funniest thing I've seen here Tavarish. Keep the damn 3 rotor, way more exotic/interesting than throwing a V8 in.

[@einzelmotorsport6711]

r3sonate except that they sound like wank, kinda like a 50cc two stroke moped with the exhaust flange rusted off.

[@ledenkmems2503]

@@einzelmotorsport6711 You kidding? Rotaries are the best sounding engines in existence. Pure raw spinning dorito noise.

[@ledenkmems2503]

@@einzelmotorsport6711 You serious? Rotaries are the best sounding engines in existence. Pure raw spinning dorito noise.

[@Van_wints]

Big turbo the 3 rotor!!!! Keep it!!!! Edit: well looks like asking us to comment was a lost cause. At least give the rotary to rob. Make him come out and pick it up though.

[@ironmonkey1512]

At the very least no LS. Keep the rotary or a badass JDM turbo V6

[@kiritohu19]

Or my suggestion put a four rotor in

[@willjames3735]

iron monkey he’s putting a Ferrari v8 in it

[@aseon3]

@@ironmonkey1512 Watch the goddammed videos till the end. He's gonna put a Ferrari V8, fucking Ferrari engine, much better than Mazda's unreliable dorrito engine.

[@ironmonkey1512]

@@aseon3 wow steppy, have a shiny star for watching the whole video before commenting.

[@JaykuhbYT]

Tavarish: "My name is Tavarish" KZbin Subtitles: "My name is divorce"

[@leohd3605]

That's so true😂

[@X-_ADRNALZ_-Xonps]

i saw that too

[@klajdimeta4083]

😂😂😂 this shit was real i thought you lieing for once

[@Paradiqm]

Bruhhhhhhh

[@sebyeet7525]

Lol

[@Crippledsasquash]

You have to keep the rotary it's a defining characteristic of this car it's amazing just throwing a V8 in it takes the cool factor down 75%

[@AJ-nh8ik]

Exactly. That's everyone's answer to everything. "I'm gonna throw in a v8" BOOOOOOO. That's why I respected what Rob Dahm did and do the exact opposite.

[@danielli123lolli]

Keep it original and special Tavarish!!

[@threezerol944t]

@infoslinger You may say rotaries are overrated, and that is debatable, but one thing is for sure....v8's are played out.

[@onkouth]

Definitely, and who knows, you could maybe get it sounding like that beautiful Le Mans winning Mazda 767b, which is the most amazing sounding car ever, how cool would that be 😃

[@adamm927]

Would be a waste of time putting a v8 in it, keep the rotary and the sequential box, fix it and enjoy it.

[@amandajane5743]

When you said 20B, I got a whole lot more interested. I'm sure your other engine is lovely but a build like this needs a stupid fast, impractical engine. It's such a perfect match. So not to influence your personal choice but I will be really, really disappointed if you ditch the rotary.

[@somebloke2238]

Same here

[@abou824]

Yeah same

[@lukebarr1023]

Agreed. 20b all the way for this one.

[@mk500]

Rotary all the way!

[@rileymannion5301]

Sameeee

[@aklevin8688]

Keep the rotary, I was excited that you got a rotary project.

[@TheBees86]

Hell yeah!

[@19chucki74]

And one BIG key: REPLACE THE APEX SEALS!

[@davidbrown6193]

Tavarish!! Bro this is a great idea! and Gerard is the guy to develop it with 👌 I’m excited man! You’re becoming the top shelf inspiration! And a lot of fun along the way!! 🤩👍👍Def 🌟🌟🌟🌟🌟’s

[@BigCarKilla]

3 rotor running on a Haltech elite, couldn’t have asked for a better management system. The previous owner knew what was up.

[@monsieuroxyopia8262]

Yup. My dad built it. He has a new rotary build going on now.

[@AMR15H]

1:45 “because I want to make my own version of my ultimate dream car” Murcielago with custom interior: AM I A JOKE TO YOU?

[@poplaurentiu4148]

Anyway he promise to do a sick build .. curious to see how long will take to finish 'it but no doubt is very cool ! ;0)

[@okay4me2]

I’m not a huge rotory fan, but I really think the 3 rotor would be much cooler, especially seeing as how it’s already in there.

[@mctaurus13]

The only suitable replacement to the 3 rotor is a 4 rotor.

[@kendaldk5634]

Yep, nothing like replacing garbage, with more garbage.

[@musskeeterbump]

@@kendaldk5634 one man's trash is a real mans treasure

[@NotADuncon]

@@kendaldk5634 are they replacing the engine with you?

[@justshitposting8411]

Billet

[@19chucki74]

No wonder Rob Dahm won't pick up his phone, if Tavarish is calling...he don't wanna be one up'd.😁

[@deecee4410]

Jarrod is the best. Hes one of those mechanic you leave your ride with...and actually trust that it will be completed fairly.

[@funkworthrollin4959]

And done right.

[@BrendenPragasam]

Keep the rotary! They are a dying breed with an insanely fun acceleration curve and sound!

[@ginco_bnz]

Dying breed for a good reason.

[@MartasZLA]

yes we want rotary engine!

[@stuartw1667]

Keep Jared on board! He really helps wrap these projects up.

[@armandocontreras5078]

Next video. “I just bought The Titanic! Will it start?”

[@806_sebass]

Lol

[@yusufalhelo4612]

Laughed hard.

[@Jeremy_Hill_2020]

XD

[@pewseries8817]

Just freaking k20 swap it and it'll be rippin in no time.......

[@station240]

Of course it won't start, engine is flooded.

[@shovington67]

Regardless of the overall damage to the car and the incredible G-Forces that bent the crap out of the frame and snapped so many other components, the cockpit completely survived which is the purpose of the cars engineering. The builder should be proud of this quality product that he brought to market.

[@RB1989MEDIA]

Keep the rotary, the sounds it makes makes the car way more special 👌

[@2kpay374]

They are just hard to work on unless you know what you are doing. I'm not sure how many rotarys tavarish has worked on but it's alot to have to do.

[@sajedeid3903]

Tavarish: I am not a big fan of rotaries *ROB DAHM SMASHES KEYBOARD*

[@Skwisgar2322]

*Rob Dahm has unfriended you.

[@sajedeid3903]

@@Skwisgar2322 rob dahm wants to Know your location

[@Bondstreetdrift]

Rotaries are awesome, especially in this king of lightweight cars, and low centre of gravity. I love V8 same, but rotary is a higher level. Important to messure the condition of housing etc. Anyway rotary is rotary. You aren't a big fan of rotary because you didn't try a good one.

[@luk4s56]

@@Bondstreetdrift i mean i get it i love rotories too but if he wants to make powerfull car on his own i think v8 is a way to go since he has no experience on rotories

[@gbpi]

I ALSO SMASH MY KEYBOARD

[@exploringwithriver7895]

Keep the 3 rotor it’ll make it different from everything in your garage plus they sound great and make a lot of power

[@ColinPrince]

Freddy, you have the chance to make Rotary history, please don’t give up on a once in a lifetime opportunity. It may be difficult but we the viewers would love to see what a Rotary can do!

[@Mplius]

Keep the rotor engine! It will be awesome.

[@photodave219]

I dig the Rotaries. Love the way they sound.

[@philliphagey2127]

Tav: I bought a V8 Rob Dahm: smashes computer screen to pieces

[@davidknelsen6257]

Nailed it

[@fingal113]

this reminds me of an old jonny cash song called "one piece at a time".

[@antonioph861]

"And it wouldn't cost me a dime".... "Cause I'll have the only there is around" ....

[@MyNameIsNidos]

One of my favorite songs of all time :)

[@jaredesham9380]

good ass song tbh

[@xmo552]

My Cadilac song

[@reynaldonisperos5871]

@@MyNameIsNidos ¹¹l

[@mobilemowers]

Build the rotary as no one has them, Stand out.

[@PuerRidcully]

Modding the whole chassis for a new engine defeats the purpose and makes it way bigger project than it needs to be. Also rotaries sound awesome

[@juandominguez8536]

Piotr they’re also shit tho, so the extra work will be worth it

[@PuerRidcully]

@@juandominguez8536 At this point he might as well build the tube chasis from the ground, if he doesn't plan to use the engine, engine management, transmission and wants to modify the existing chassis to fit the new stuff.

[@LuisGarcia-vs7zd]

How are they shit, there’s a reason they are banned from any competitive sports!

[@mattlawrence8922]

Dont get me wrong there fantastic engines but maintenance is one whole other story

[@gustavtysklind4715]

They sound good but they are trash

[@saintless232]

"Shmee, how many cars are you going to buy?" Shmee: "Yes." "Tavarish, how many wrecked or weird cars are you going to buy?" Tavarish: "Yes." Tavarish is becoming the Shmee of wrecked and weird builds! Love it though!

[@seasgarage]

Love shmee! Dude has a lot of income! And hes about to build his garage!

[@sandergrimm2771]

Lol nice one!

[@joelsimmons7556]

No One: Tavarish: this car is a complete mystery to me and I don’t know what it is. Tavarish: *proceeds to break down the inside and outs of it part by part with plenty of knowledge*

[@alejandropadilla3511]

Keep that rotary. If they're rare with rotaries and it has a chance then do it.

[@Johnnywhamo]

LOL.....no shit...what a fuckin hack!

[@fruitstar8]

Alejandro Padilla apex seal headache incoming

[@ArchetypeGuitarsNZ]

Rotors might be problematic, but there is no chance in hell it will be more expensive then maintaining or repairing a Ferrari engine

[@ArchetypeGuitarsNZ]

@@KrustyKlown you said it bud, I do tire of seeing LS engines whacked into everything though. The results don't lie however, huge power, reliability and part availibilty the LS wins every time. I've had experience with both formats, and know of about 2 rotors that have lasted the test of time making big power. My own experiences have been shit given the build quality of the engines lead to failure. Now I run neo version of rb25det, been an excellent engine for 7 years now. The guy that tunes mine has just put a v12 ferrari engine into a series 4 rx7... It cost him over 20k just for new pistons (nzd). Wonder how many 20b engines that would buy.

[@rallywagon261]

Ok, first, rotaries aren't all that unreliable. Emissions and poor design judgement from Mazda was the rotaries biggest issue. If your building a rotary and you know how to fix the stupid shit Mazda did (ie, remove flaps that close intake for the rear rotor, run premixed, getting air flowing over the back of the motor, etc) then a rotary isnt all that much less reliable than most other engines. As for an LS swap, I lump a JZ swap in with it, been done to death, and just isnt that interesting. However, there is something to be said about the reliability of those engines when built. Ferrari crushing numbers that can do more than 10k miles before needing a rebuild. I think that fact gets glossed over a lot when talking about modern supercars. They make huge numbers, but the maintenance requirements and costs on those cars are insane.

[@LUNCHMONEY4numbers]

Tavarish: "RCR stands for..." Me: "Regular Car Reviews"

[@112fail]

wich rcr is best rcr??

[@Ae-fx4rc]

Scr is best scr

[@llaughridge]

The fuel colour & smell is probably because the previous owner was running pre-mix in it to protect the apex seals.

[@willbennett7508]

Him: I’ll show you this website it’s cool Also him: I’ll just bid $600000 on this lambo real quick

[@Anonymous-db2de]

60,000... not 600,000.........

[@ScoobyShotU]

@@Anonymous-db2de right I was like that's a brand new one decked out pretty good too lol

[@ektrolleyboy]

Whilst this is amazing. I have OCD and you’re currently ruining my life! Can we finish the Bentley? Or the 355? Or the SL gearbox? Or the Gallardo roof? 🤷🏼‍♂️🤦🏼‍♂️😂

[@lawrences1347]

I was kind of looking forward to a month or two of finishing the backlog after that crazy SEMA rush. Especially the SL gearbox swap.

[@MrTetedefouine]

He need big project to make views, but yeah, still waiting and this, especially the SL55 ☹️

[@cyanprince00]

And also, why's everyone forgetting about his SUPRA?! Literally said it was one of his dream cars.

[@vro1899]

Or the ferrari

[@anthonylam8776]

I’ve been waiting for the sl55 for so long lol

[@grayzbildz]

Tavarish- "this will be a long-term project"....with 20 other long-term projects in the background

[@marvinmartian3671]

Keep the rotor they sound so amazing, when you blow it up put a different motor in it and sell the rotor to me haha

[@progenji6970]

I knew it was an SLC right away. The roof and door are iconic to me. It's my dream car.

[@_Jesse_]

Yup same

[@bandit154]

“He’s a bit shorter and wider than me” “The owner didn’t have the talent to drive this car” Like you really just roasting this previous owner lol

[@vwtdis]

It seems a lot of the cars that get built on these channels have had talentless drivers in the past

[@SympathyRS]

​@@noooooooooooooooooooooooooooo0 i agree, he is kinda roasting the previous owner for no particular reason. At least the previous driver of this had the car on the track, unlike others... Plus the accident may not have been fully the driver's lack of talent at fault

[@timwegman5776]

Oh grow a back bone guys. He is just messing around and let’s be honest they did total the car right. People are too serious now days.

[@THE-BUNKEN-DRUM]

@@noooooooooooooooooooooooooooo0 : That taste is probably, the shite you talk.

[@ghoulbuster1]

He deserves it for crashing an amazing car!

[@theted7736]

How bout that manual swap Merc you’ve had sitting forever!!!

[@globeztar]

Chris Furlough Exactly what I thought...

[@Netninja543]

The Carcaine problem intensifies.

[@bcmstfilms]

Fuck me give Tav some credit, He's rebuilt two Lambo's this year ffs

[@mba-20]

The Ted why would he do a merc now when everyone already worked on ones in youtube instead of doing this car which hasn’t been re built by anyone on youtube , he should do the ones he prefers in the end he will drive them not us , he even will probably make profit from this car much more if he wanted to sell it after than the merc so this car gets more views more value more hp more unique and interesting more money etc the list goes long

[@hrep14]

I think all his other build projects will be fillers for this one. This one is more interesting.

[@dusterpl6093]

Don't swap the engine. A rotary powered race car build will be something awesome and unique. Putting a V8 there is just lazy and too easy. Rotaries for life m8.

[@fraderrty]

costly engine really mid

[@ragedemon6513]

And they can make way more power and they’re way more reliable so this is a very invalid comment and just your personal opinion

[@tobiasschmidt5027]

And the weight is way higher with a big block. Rotarrys are light and sit lower in the car so the weight is loser oder all

[@thedoctormma9433]

​@@tobiasschmidt5027a rotary engine would need a turbo. That's why the RX7 turbo engine weighs 411LBS and the ls1 weighs 407LBS. The legendary 1uzfe clocks in at 365... hell if your spending big bucks on rotary you might as well buy a Judd V8. 255LBS, 670HP, 4.5 liters, flat plane crank. You don't know what you're talking about 😂

[@Sam._.Santos16]

​@thedoctormma9433 the rotary weights 247lb WITH turbo

[@alexrodriguezrx7]

So sad to see her like that.This car belonged to Gary Buzzelli older gentleman , I know quite a lot of this car from racing it at Fontana Autoclub speedway to when it was dyno tuned. @tavarish private message me if you would like pictures of it on the dyno, on the track, in my garage, and even side by side next to my time attack rx7. Update: Gary had sold the car . The new owner crashed it within weeks of owning it. will soon make a video of me driving it and pictures of it when it was in its prime. Please subscribe to my channel for when it drops

[@mmmaiamm3078]

I want to see that time attack rx7

[@alexrodriguezrx7]

@Elite Soulfly will do think I should start doing videos again and uploading all the videos I have from before as well

[@alexrodriguezrx7]

@@mmmaiamm3078 I have a couple older videos on my channel. Newer pics and latest you can Google my name and rx7 and tons pop up everywhere

[@TheOfficialDaBoogaloo]

Alex Rodriguez You gonna post those videos or what...

[@strongdadenergy7586]

Alex Rodriguez fishing for subs but never uploaded 😏

[@dawveed26]

I've got a slogan, " Finish the projects that you have, quickly." 😂

[@emanueldavila85]

@@rileys8741 I think everyone from the early days is still hoping that happens. It also kills me he did not finish the MR2...

[@vinccarat9462]

please leave the rotary, it makes it so much more special and cool, plus a lot more valuable to real car enthusiasts

[@MartasZLA]

Keep it!

[@AceP40]

awww, you already bought an engine?? the rotary would be sweet!!

[@AceP40]

oh, a ferrari engine, welp

[@threezerol944t]

@Osama Bin Laden Yeah, that 355 lump would be a downgrade for sure.. unless he boosted it I suppose, he does have a Haltech standalone(at least part of one).

[@taylor9280]

You’re seriously going to V8 swap this thing when the whole point and essence of the car is the 3 rotor setup? You need to full send this and get that 3 rotor going, such a shame to remove it.

[@bmxriderforlife1234]

Idiot. These cars are designed around an ls. The rotary was a swap in the first place. And the original engine is two hayabusa motorcycle engines turned into one. Then someone ls swapped it and the company jumped on board. Same with other kit cars that are similar. Stop being dumb. These cars are meant to be super cars or hyper cars for the price of an m3 that you can daily drive without being any richer then your average mustang owner. Rotary throws most of that out the window. Track toy only ride then sure. But why.... so many other options. Why wreck something that price as a track toy unless you got better daily drivers. And even still. Build something else cheaper that's just as quick.

[@matthewthebozoextra4846]

@@bmxriderforlife1234 i kinda agree?

[@mazdarx-8rotary.97]

@@bmxriderforlife1234 nah. The person that bought this car made it a rotary build with rotary styling. So shut the hell up or I’ll throw my used apex seals at you.

[@bmxriderforlife1234]

@@mazdarx-8rotary.97 ...... So cool the worlds first hybrid is a muscle car. Because they assembled one in like the 90s with some random shit from an old 70s car. Dude no. Funny but no. Its a swap. And don't threaten me with your already trashed apex seals you lost fifty thousand miles back. You're an rx8 you have the shitty dorito power. Get a three rotor and then we can talk. Still a swap though :P

[@mazdarx-8rotary.97]

@@bmxriderforlife1234 nah. The 787b had a 4 rotor and have you heard and seen that thing. That’s a monster.

[@jgott1745]

Keep the 3 Rotor!! Way more interesting than a V8

[@smokingtires9716]

Yes I agree

[@shravanav993]

The v8 will be more reliable

[@shravanav993]

You know the apex seal problem fire explosion that kinda stuff? A Ferrari v8 is more reliable

[@johncastle95]

The 430 V8😍😍😍😍😍😍😍soooo much better

[@Itsme-sr8rp]

@@shravanav993 fuck reliability

[@DNLV-yn2cw]

Please keep the rotary, at least for a different project, it’s more unique than just another V8 🤷🏻‍♂️

[@SarahTheDutchRebel]

Keeping the rotary would have been a lot more interesting and easy since everything was already setup for it anyway. Oh well.

[@Iskelderon]

But since neither of them is a rotary fan, it's probably better to sell the engine to someone who is.

[@boazkloppenburg]

Keeping a rotary is never easy

[@jahnjee]

@@boazkloppenburg just like what Tavarish and Jared said, rotaries never like to sit still cuz once they sit the seals starts to go bad. Obviously one easy solution of keeping a rotary engine is just to use the damn thing

[@acrienteangelic1862]

@@jahnjee The problem with using a wankel rotary is they don't have much life, so using them is just a money pit. A tuned V8 will easily outlast and outperform wankel rotary engine. Even Wankel himself thought it was a bad design because it's so horribly inefficient and wears much faster than a more complex piston engine.

[@samiraperi467]

@@acrienteangelic1862 AFAIK rotaries live just fine if you can drive the snot out of them.

[@GamingNKim]

Its always good to have a friend like jared who supports you all the way. 😊😊

[@esqpain123]

The rotor shaped muffler is awesome, whoever built that really liked rotary engines.

[@sinformant]

Reminds me of most sportbike mufflers.

[@chrisfix]

Genuinely excited for this! I can tell you are as well and I know if anyone is going to make this happen and make it amazing, it will be you dude! After seeing that Lambo I have no doubt!

[@twoacepilots]

dang

[@tylercai]

Eyyo

[@raymonddesimone8934]

CHRIS THE GOAT!

[@fumimork69420]

YOOO I USED TO WATCH YOU ALL THE TIME

[@renaldo546]

Hi Chris

[@edgulino2868]

The best part of this build was the rotary engine ... hope you keep it

[@musicandvideos7069]

For your spark plug problem. Purchase a sparkplug socket and use a grinder to taper around the edge. Label it as rotary engine spark plug socket.

[@milanschreurs207]

if you take out the 3 rotor and put in a v8 it will be like every other sl-c, keep what makes it different and interesting

[@ColAngus]

It's a Ferrari V8.....

[@MrAzmore]

@@ColAngus Its still a V8 tho. How many cars have a V8? every car, how many has a 3 rotor with 800hp? that one

[@ColAngus]

@@MrAzmore There's a shit tonne of race cars running 800hp 3 rotors, look em up.

[@jnmedina242]

Keep the rotary engine, it would make a more interesting build

[@MRShifty24211]

I was very excited until you said you were going to rip out the heart AKA rotary out of it a little disappointed

[@ABCDEFGHIJKELA...]

3 rotary boat engine. there's a few RD's out there using them, incredible potential, and torque you don't expect from a Tr-Dorito. Easily supports up to 1k hp, and 700+ torque. There's a Hoonigan Channel "VS" episode with one in it you should watch if you haven't. it's sick!

[@matthewkirkpatrick5545]

KEEP THE 20B IN IT MAN! everyone does v8,s

[@ardijanuar2036]

Hint : it's a ferrari f430 v8, pretty interesting engine as well

[@Lautrec608]

Ardi Januar yea but Doritos

[@lukedanielgalon1596]

@@ardijanuar2036 but u don't see another/other cars except the corvette prototype with rotary but only on a mazda

[@timwegman5776]

Yeah but rotary engines are such a pain in the ass and are super in reliable. Most rotary engines do not last more than 80k if you lucky. I will admit they do have a cool factor though and sound sweet but I’d still swap. I was hoping he was going to do a v12 though.

[@thugasaurusrex6004]

Adding to the "keep the 3 rotor" comments Hey you should keep the 3 rotor. Gives character to the car. I'd be sad if it left :(

[@noahgronberg2131]

Please keep the 3 rotor, such a legendary engine and would be cool to have some variation to your fleet of cars

[@WhiteWaterVisuals]

Classic Rob and his rotary rx-7, I remember back when he crashed his diablo in the rain lmao

[@whiteblacksicktricks]

Keep the 20B, it makes this build much more interesting!

[@knobrush]

Just started watching this vid then stopped because I realized I'm still waiting for the Merc manual conversion and Bentley engine swap vids.

[@sinformant]

I thought he already completed and sold the Bentley. I could be wrong. I thought he was showing it to videobob

[@JohnnyBeGood123]

The rotary is a keeper!!! That makes the project extra special!

[@missingrighty]

As soon as you unveiled the car I thought "That would be awesome as a center seat like a McLaren F1". I was so happy when I heard you say that!

[@dylanberry7822]

Tavarish: These rotary engines are often pretty finnicky/unreliable. Also Tavarish: We plan on using a twin turbo Ferrari engine. Seems legit.

[@andrewlaw]

As you say, most are equipped with an LS or a Coyote so having a Rotary makes it different, I'd vote keep the sewing machine engine.

[@himanshurana7735]

keep that rotor,everyone does v8 swaps and why is the lambo missing its hood and lights at 14:45

[@jjmturbo]

Himanshu Rana pretty sure the lambo front end is going on this car.

[@OneelG09]

Seems like an older video because the other guy mentioned something about 'launching into sema 2019'.

[@godalmighty8018]

not everybody does ferrari v8 bentley turbo swaps, and latelly everyboda is on the rotary swaps anyways

[@mohamedelsadig5820]

@@jjmturbo no, he spent so much time on the lambo

[@ColAngus]

Himanshu Rana Not Ferrari V8 swaps....

[@jeremyhagen7684]

Lol. There’s a guy that teaches tornado spotter classes that calls “scary looking clouds” SLC’s.

[@GDKimble]

I LOVE THE 3 ROTOR!!! Watch the vid you showed and listen to that engine.

[@Doellimann]

„I might have a V8 to put in...“ NO! GOD DAMN, NO!

[@leonardgermain]

The ferrari V8 would be nice

[@petescarport]

Nooooo!!! Keep the rotor

[@sympathy4643]

keep the rotary rare, sounds amazing its underrated on yt

[@patch5859]

There's a KZbin video of a guy who does engine sound effects by mouth, sounds exactly like the car you showed here!!! He's awesome!

[@hibiki2gud]

"I bought a 3 rotor track car, but I won't use the 3 rotor" I'm kinda sad.

[@tavarish]

I mean I do want it to actually run, so...

[@chikendagr8994]

@@tavarish exactly what i thought

[@RequiemOfAnguish]

@@tavarish Then mod it how is necessary and save it! You said yourself those engines are rare D=

[@RequiemOfAnguish]

@@tavarish Okay fine, do the Ferrari 4.3 xDD

[@hibiki2gud]

@@tavarish I'd say it's a victory if you get a track day or two out of it annnd you can say it ran before getting parked forever cause dorito magic.

Yes, I'd keep that Wankel "rotary" engine in it. That sound is insane.

[@mikewalker6016]

Wankel didn't make that rotary, Mazda did.

@@mikewalker6016, Wankel is the name of its inventor (Felix Heinrich Wankel), and by extension, of that type of internal combustion engine. A "rotary engine" is originally a different type of internal combustion engine, a Otto cycle engine with a radial configuration of cylinders that rotate around a crankshaft.

[@NotADuncon]

@@JG-ge3ui the OG design concept was before Wankel if you want to go waaay back. Some polish dude way way back.

[@mikewalker6016]

@@JG-ge3ui Wankel didn't designe the 20b either. Mazda did. Wankel couldn't design an engine that actually worked, Mazda did

[@mikewalker6016]

@ Mazda rotary engine

[@bansiksski1456]

keep that 3 rotor in there🤔 everyone has a V8

[@09Mrsubaru]

Not a Ferrari V8. That thing screams.

[@adrianlowe8419]

@@09Mrsubaru cvfhtu57t

[@bansiksski1456]

James sevensix nope they aren’t 😂

[@thatboyd3109]

David Bachmann dude do you know how much maintenance they require? They really are junk

[@illestJun]

Stop. why not both?

[@carzombieeatery3216]

Awesome... Love SL-C's. I've got an RCR 917 currently being built. Also, RCR provided 28 cars for Ford vs Ferrari movie.

[@Governmentiscorrupt]

Pics!!!!

[@phillipbailey70]

Tavarish recorded his sponsors segment at home - that's why he's whispering, so his Wife can't hear him buying another car! :)

[@trevorruth9941]

You should just rebuild the rotery as its a rare and mighty engine when built right and pared with the right turbo.

[@alecbrayton3789]

“we have this very rare 3 rotor that sounds extremely good but we are going to put a different engine in because of some dry apex seals”

[@juandominguez8536]

Alec Brayton *because rotaries are shit and there’s a reason no one makes them anymore

[@Probly]

Juan Carlos Dominguez bro stop commenting this on a load of comments lmao; we get it, you vape

[@juandominguez8536]

Probly Not stick to your rocket league bud

[@aidanmakinster922]

*Because lots of horsepower and no torque!!!

[@elijahherman]

Rotaries are crazy money, put your pitchforks away

[@GrimReapiN]

I'm more into motorcycles than cars, but your passion for cars and your way of hosting your show forced me to subscribe. 10/10 channel

[@daver.9971]

3 rotor is way more cool then the Ferrari v8, in my opinion!

[@AnthonyIlstonJones]

They're both cooler than the usual LS swap the world & his dog are doing at the moment, but there's a reason why they're popular.

[@Koolicyde]

KEEP THE ROTARY - EVEN IF IT'S FOR SOMETHING ELSE.

[@VanWinger]

Use Non-Synthetic Lubricants. Pro Tip. I would also run a little 2 stroke oil in the gas. Smoked like a hoo-ore but would keep the seals tight.

[@CowbellCustoms]

@@VanWinger that 20b probably has no oil metering pump, so synth should be ok and definitly it needs to be premixed with a good quality premix.

[@VanWinger]

We can say that we agree to disagree, but synth can screw up apex seals.

[@among2641]

Its not any regular V8 its from a ferrari

[@domi9353]

steve 😂😂what

[@mattevans4377]

Idea: Save the 3 rotor, and put it in a Smart Roadster. Maximum chaos ensues.

[@malcolmhardwick4258]

Matt Evans the engine would stand still but the car would spin !

[@GOBRENDON]

Love Superlite SLC’s. Been a big fan for years! Lamborghinis & these SLC’s are my favorite cars. I’m saving up for building an SLC. I’ve been wanting to see one you guys on KZbin build one of these from scratch. Very excited to see what you do with this build! These cars need to get more attention than they do. Peace!

[@davidb321]

Why would you buy that car with that engine if you’re not going to use it? You gotta get all the braps!

[@whipdan674]

brap brap brap brap brap braaaap braaaaaap braaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaap

[@JeKuu420]

keep the rotor, it has the best sounds🔥

[@robsII]

I know you said you already bought something else engine wise. But damn I'd really love to see you work out that rotary. Talk to Hert @ Hoonigan imo before writing that thing off!!

[@FredaricoIsCooL]

Rob S Probably want to talk to Vargas (his tuner) instead of hert lol

[@lazy1126]

@@FredaricoIsCooL hert and working on cars *exhales strongly*

[@elree47]

Off course yasss

[@robsII]

@@FredaricoIsCooL sure, my point was hert could get him in touch with the right people to make it crazy lol

[@kurtisbennett7272]

Alot of people bashing the SLC but they got some serious numbers behind them. Lots of track records and are quite the road car.

[@ΚωνσταντίνοςΓιαννακάκης-β3β]

DON'T YOU EVEN THINK OF REPLCACING THE ROTORS WITH PISTONS!!!

[@09Mrsubaru]

Pistons are more reliable than rotors.

[@axeami1354]

@@09Mrsubaru you really think reliability mean a whole lot when you're building cars like this, not to mention anyone that thinks rotors are really that bad on reliability really don't know a huge amount about them.

[@arg8763]

@@axeami1354 Rotaries are so reliable not a single OEM uses them, not even Mazda.

[@terminal_veloster986]

FireSkeleton112 superior engine**

[@arg8763]

@@JG-ge3ui all of that sounds like a long form way of saying unreliable.

[@j.brooks5017]

Should keep the Rotary engine.... That would be so interesting an fun to follow along.

[@stoopydh4878]

Why would you even consider replacing a 3-rotor sequential with something else? :O

[@wiredjerk]

Clicked on the thumbnail cause I wondered if he really found a Koenig in that bad of shape he was going to try and rebuild. But my heart fell when I saw it was an RCR....then he showed the rotary 🤤

[@BelayaIvanka1]

As a person watching your videos, KEEP THE ROTARY!! If I was the one rebuilding that car, RUN FROM THAT ROTARY!! 😂

[@joeysweet9045]

Keep the 3 rotor engine in it dude they are awsome!

[@areanlee4237]

Keep the rotory in, it will change your mind when it's all done

[@ahuertas69]

You live my dream Tavarish! If you can manage to pull this project off, I'm going to watch every step of the process!