MCN's guide to Wheelies

[@ClutchFirst]

Can you guys do an updated version of this vid? That would be awesome.

[@fabiena1787]

@Poose McPoose Very sad indeed. I don't live in the UK, but I feel for you. I get that a rider could get fined if he/she pulls a wheelie in front of the cops, but nothing so drastic. I even think that this kind of exercise with the clutch should be manatory in riding schools. It helps you feel and understand a lot of things. After that, a brain is needed of course.

[@cooleyballs1]

Don't worry.. They still Can't pull a decent wheelie.

[@johnny_123b]

I like 144p. makes it look like oil painting

[@fhhfgj]

eternyman Yes Rembrandt was the camera man.

[@4K_Design]

Haha when you watch a 144p video, you know that it is about better days. And as it is more difficult to distinguish details, you value it more.

[@fabiena1787]

Honestly, Neevesy looks like Mick Doohan during the first seconds of the vid.

[@nicenow25]

Pml

[@o0WestCoastin0o]

Exactly what they say here, just start off by tightening your clutch and only tap or "bang" the clutch with 2 fingers and low rpms in first gear and slowly work your way up the rev band at first u wont even bring it up it will just be "jerks" so u can feel it. then as u get better u will bring it up. and if u r kinda scared make sure to pinch the tank with your thights so u dont slide back.

[@b5150k]

I just recently started doing wheelies. This video has helped me out a ton.

[@priv1leged]

that was back then when MCN recorded their videos with a Motorola Razr V3...

[@armystrong123g]

Bahahahahah

[@frankmurphy7143]

I cannot believe that people learning to wheelie were doing it in opposite directions passing each other.

[@TwoAndAHalfBikes]

and next week on MCN how to change your fork seals

[@turbo311]

Gotta love MCN for doing this kind of video.

[@Almedz]

mcn best motorcycle channel on youtube

[@jebova2301]

For anyone wondering what the name of the song is, it is "On My Way". If you search amazon, it is by "Shockwave Sound".

[@newkid5465]

Watched 100 videos and this one did the trick thanks !!!😇

[@Toepher86]

Yes! Just did my first power wheelie!

[@theavangelist]

I just remembered this video existing and damn! neevies pedal wheelie balance is just ... wow!

[@emiliosantana]

Great stuff, I just met Eddie Kidd, the King of wheelies and stunts and I'm inspired to learn, thanks for this great vid! I'll be sure to try on my push bike before I try on the Ducati! Regards, safe riding, es

[@ajdepew5545]

What mic did you plug into your potato?

[@onestudios8660]

This is a video from 2007. What did you expect?

[@moncheeka]

Brilliant.

[@DIY3v]

@arielatomhc: Covering the back brake is a great idea if you plan to do a sustained wheelie, or want to clutch far enough to approach the BP (Balance Point). However the occasional street clutch pop shouldn't get you anywhere near BP unless you over-revved badly before releasing the clutch.

[@skyline44512]

if you drop the front end from a wheelie you'll need new fork seals eventually. the trick is to roll back on the throttle when you're letting it down so that it slows the descent. this video is cool though :)

[@heysteve]

wow that light gray-silver sv650s looks great

[@RicanHavoc787]

Great video! Most videos I see on here that describe clutching it up are demonstrated on 600's (give or take). This is one of few I've seen on a 1000cc which show step by step. I too, like the instructor in this particular video ride an R1 ('08) and I can "power" it up fine in 1st but as the vid says, going a bit fast to begin with! I want to clutch em up!!! Anyone out there know: What gear is he clutching it up in, 1st or 2nd? And what RPM in that gear (on average) do you "slip it" up to on a

[@prorobo]

Cool vid! Okay so clutch it to get the front up, but how do you accelerate through the gears once you're up? Clutchless powershifting? Won't the front drop from the throttle blip?

[@julingy]

i had a ninja 250. about the same hp (prob a bit less). it is definately possible. try different body positions ( it is natural to put your weight forward when you feel the front get light, try fighting that urge becasue leaning forward will not let you get it up.) you'll need to use the clutch with your bike. (i stilll do with my triumph 955i) - and of course only do this while you are in complete control of your surroundings (scrace parking lot) cover your rear brake

[@hvkv0000]

i luv MCN........keep up the good work....

[@fanticpower]

i grew up on trials bikes they are easy to wheelie but a road bike is a lot different ,it is the speed that is the big difference,on my gas gas i am in top gear only doing about 30/35 mph and can wheelie for a couple of hundred yards on my gsxr 750 i struggle to do more than 30 /40 yards ,it is the speed and the snatchy throttle response that makes me struggle,but keep practising and take your time

[@ItsMeHammie]

Great video. Any chance of seeing remake in a new unit of time (and camera quality)?

[@benjyboba]

I think a large vtwin is a good wheelie bike to learn on. With lots of torque you don't even need to use the clutch.I've tried a short wheelie but don't want to hurt the bike. I've done wheelies on motox bikes 250, 2 stroke and on a 450 4stroke and i've almost fliped them in 4th gear. i'm no good at them but had a go and stayed on em somehow.I'd love to be able to keep it up in controlled manor but don't want to damage machinery in process.

[@1x1pur31x1]

Hello mate, what tyres have you got on your CBF? I've got the stock Indian tyres on mine and they let go now and again a bit too easily but can't find any replacements in the same size :s cheers

[@pinkdogsrule]

yes mate, you can wheelie a 125cc just as well. the thing about doing it on a lot is if you drop your bike, it might rash some. needless to say; your flesh is much softer than your bike too so make sure you wear some gears. don't try too much too soon. start at 1st gear 4,000 rpm. pull your clutch in without letting off on the throttle, and drop the clutch quickly as if you're pulling a gun's trigger. don't hold the clutch in too long, release fast.

[@brianrobinson4866]

what bike are you riding? it all depends on the bike. the R6 that i had,the one in my picture, i had to wait until 9 or 10k rpm depending on the gear i was in to slip the clutch. you just have to find the right rpm on your bike

[@dinosoreis1]

@acat46 biggest thing is to cover your rear break so you don't loop out. Looping out is the fastest way to wreak a new bike.

[@FunkyNugzz]

The point in first gear when you're normally riding and would shift into second without looking at your rpms is generally where you want to pull the clutch in and re apply rapid acceleration

[@FrenchJohn]

@dtwizy22 Seems to be a Honda CBR 600 or CBR 400 with complete CBR 600 fairing from Tyga fairings.

[@dianagreer21]

Someday, I too, will pull off this move!

[@Nick-Emery]

Did you ever do it?

[@zellster]

awesome video! I'll keep those things in mind.

[@lolspain86]

have you bled the coolant system? Otherwise it will get airbubbles in the system, wich wil eventually cause overheating in some degree

[@YogiKai]

I would like to see some of these stunts done on a cruiser. Doing tight corners and wheelies on crotch rockets are one thing, but it seems that doing something like that on a cruiser must be something totally different. I do, however, really admire the skill demo'd in these videos. Awesome.

[@MobiusPT]

fantastic video! what about the new ducatti supermotard? i loved it!

[@idangoldbroom]

I just sold my bike and can't really practice right now until i get my new one, but I'm interested to know if when you 'pop the clutch' do you keep your hand on the throttle for a couple seconds or do you take it off immediately? Also at what rev. point do I pop the clutch? and if I was going 60-70mph will popping the clutch at that speed work (given I'm most likely at 3rd gear or 2nd if I'm stretching it). Thanks

[@madmanownzall]

This looks fun. Is it harder to do on a 250? I'm buying a ninja 250 and eventually want to learn to do this.

[@jpHouse]

Hold throttle, clutch, will build rpms, then essentially the jolt front higher rpm as clutch is released is what gives it lift, then its just throttle control and balance.

[@DesertEagle102]

Mcn are the best!

[@nicenow25]

what was the all white bike in the vid? The one that simon was riding?

[@w0ffle]

Anyone know where this was filmed? I have seen this track/strip on many youtube videos etc..

[@spsfalex]

@arielatomhc he said that they have to cover the clutch. when you action the clutch while doing a wheelie, the rpm lowers to the minimum so the back tire slows down. that's the engine brake, which acts like a back brake. kinda...

[@OJay07]

Great video. Thanks for sharing!

[@jebova2301]

@MrSpeedfightRichy h, 50cc auto clutch, or full automatic? if its an auto clutch, just pull up on the shifter and that will let you rev like you have pulled in the clutch on a regular bike

[@zelibober]

+1!!! 90% of all wheelies crashes here on youtube is because ppls do clutching. Power wheelies is much safer, its lil bit harder to do but it will save your health, your bike and your money.

[@partyman255]

this guide is brilliant !!!!!!!!!

[@acat46]

question. when doing the wheelie we must slow down to end the wheelie right.. so when the front tire hits the gravel of course it will hit hard. so will it damage the bike from doing that??

[@str33tb1k3r]

THE ACCENT MAKES IT THE PERFECT VIDEO!

[@TheDuerden]

When he says a little "flick the clutch very lightly" he means pull it in let the revs increase then release it, this will be a bit of a jolt but it should raise the front end. If you plan on doing this, I suggest you start off with a VERY small flick and increase it from there, so the first couple of times you may not get the front end up, its better then laying on the floor with your bike flying off down the road and crashing without you.

[@dannyehp]

Do you recomend to try this when youre a begginer? or how much experience or time I need to try this?

[@Nick-Emery]

Upon passing CBT

[@ratinblack3037]

What speed were they doing on the first little wheelie?

[@Naturepheonix]

What brand and model is the white and Street bike style Grey one?

[@natfx7]

I got 180cc bike but I am afraid to pull a wheelie as I haven't got any knee or elbow guards however I got the helmet. Is it safe to do it only with helmet?

[@yankfroggy]

Haven't had the balls to try it until now. Do you think I can do a clutch wheelie on a stock 750 4cylinder Honda? It's not like one of these light race style bikes (2003 nighthawk -75hp, 475lbs).

[@striker865]

what was the cc's on those bikes? And pretty much all you do is flick the clutch? I gotta try that

[@cmdrstarion]

@arielatomhc Back brake on a motorbike is on your right foot - and should be covered under normal riding anyway.

[@Nick-Emery]

No it shouldn’t

[@sukisv]

there are some guys who say that wheeling on an suzuki sv 650 isnt good for the bike! Is that so? Or is that just when you make it for long distance?

[@CallMePenny300]

Only way to wheelie Ninja 250 is with a high clutch drop. You can drop it from 8,000rpms on a launch, or coasting under 5mph, you can drop it from 6-7000, just have to hold the throttle full out after that. Try a little at a time and lean on the bars so you dont flip it, but with a 40hp bike, its more about balance than any available power. Can be done though. :) Just grab a flat empty lot, warm your tires up (essential) then just play the clutch til she lifts.

[@lolspain86]

Then try to take the top radiator hose off, and fill coolant(fill more water than coolant than usual, since water cools better. But not only water because then it will corrode, and can freeze) till it drips out of the radiator. Then put the radiator hose back on, and fill the tank to the recomended level of coolant and go for a short ride. When you come back, check the lecel of fluid in the system, and if required fill some more. If this does not help you can also change your sparkplugs ........

[@ARC21001]

@sprs747 Doing wheelies can put alot of strain on the chain. As the bike lands, the chain in a way tightens/stretches. This gives the potential for it to actually snap! If this happens it will be taken into the inside of the bike and whip it, causing incredible damage to things like an aluminium frame or just generally the engine. Other things can happen such as the the teeth of the cram shaft ( drive shaft??) can twist!! this happens when popping the clutch.

[@Srirachaa]

I personally am uncomfortable with clutch ups, power ups are effortless, but I'm on a zx10, so that might be why. What do you liter bike riders do, clutch ups, or power ups?

[@majormadass]

@arielatomhc yeah same perspective mate, cover the back brake with your right foot just incase it tips to much, give the back brake a tap, should lower it down, same on a mountain bike

[@Carlos_500]

Can someone tell me when you slip the clutch do you increase power with the throttle too?

[@Shockernor]

And off i go to try this out on my Yamaha FZ6 :-P Thanks for this video...

[@themisfitjoe]

@sprs747 Well i think that's kindof a misnomer. Going to trackdays (i.e. racing your bike) will cause excessive wear on most of your bike. granted there should be a light disclaimer in general of the added cost of pushing your motorcycle to its full potential, but if you are going to track days, you most likely will be investing close to 800 dollars in protective gear, and more for tires.

[@claudiofuenteswingbe]

Great video and very helpfull somebody have the translation to spanich of all the mcn video?? thanks

[@SIKishtrans]

I have 07 r1. when accelerating at about what rpms i should pop the clutch? Thanks.

[@Ryknfjor]

@vrossino46 what year? looking at it again it almost looks like a honda for some reason...

[@pinkdogsrule]

you should get a cheap 250 cc dirt bike and learn on it. i did all my learning in an open field near my house before doing it in a parking lot with my zx10r. if you own a sportbike try releasing 35-45% PSI. that help tremendously

[@sccracing]

clutch control! brilliant! thanks.

[@123JumpingJacks]

Do you guys have a wheelie schol in the us i can attend

[@kudoskid123]

Yeah classic, he didnt even mension the Back Break coverage at all times doing wheelies, I'm just learning and I've been practising on my ktm 950. The other day if it wasnt for covering my back break I would have flipped it big style.

[@leilani2895]

@jjbearsf simple go about ten let off the gas pull the clutch and rev the motor to about 4k and pop the clutch. its one movment. just practice getting it off a little at a time

[@01285ant]

@germanhector1 you can wheelie anything, with abit of practice im 16 and i learnt how to wheelie when i was about 10 on my mountain bike, now i can wheelie just about anything, practice makes perfect :D

[@KensingtonPhiladelphia]

this video soesnt help at all.... i need to see spacifics, such as, RPM's, how far are we cracking the throttle, whats a good spead and gear?

[@chief2001]

need to make a video just like this but with smaller bikes like 250s.

[@jebova2301]

does anyone know what the song is while they are actually learning? ive heard it on tv, motogp, and here. never can find a name though

[@djdejan72]

this presenter guy is awesome!

[@azlanrosli]

@dansulo1 i thought he said 'flip' not 'press'.. what he meant was "half way through the revs.. pull gently and release gently the clutch..

[@dbauernf]

Great vid.

[@miltus87]

thanks bro.. ima try it now

[@kelly07ash]

hi im looking 2 do a wheel on my suzuki gsxr 600 cud u giv me sum tips this is my first time thanx

[@acat46]

@dinosoreis1 i see.. so like easing on the throttle and it gently touched the ground.. thanks for the advise. coz' i'm quite afraid i might damage my new bike (going to buy one soon).

[@germanhector1]

i whant to do wheelies like this i got a Yamaha 12E with 400 ccm and 27 hp i know it´s not powerfull like the bikes here but is it with my bike possibel ?

[@Fuzion180]

cool stuff, nike bikes, great ending too.

[@TotalPowerTP1]

Nice vid, wonder how mine compare!

[@Pimlicoman]

Someone elaborate? So You Keep The Revs Goin', And Tap The Clutch? Also What's Better To Do It 1st or 2nd Gear?

[@madmanownzall]

Is this easier to do at a higher speed? or lower?

[@Ryknfjor]

@vrossino46 Oh i know i think its a 929 or 954! Man that bike looks effin' sick with those race fairing on!

[@MrSPAS1200]

@mell00ut5 it's an Arai RX-Q but the graphics are custom

[@aaarsix]

what do people mean when they say "cover the back break"? have your foot on it to break just it case?

[@keno4moto]

the white one is a suzuki gsxr k5? thx

[@Nikatnite79]

I am learning to power wheelie but my issue is keeping it up in first gear. After I get the bike up at around 5k at 35mph I start to run out of RPMs and I'm going about 55mph and I dont want to redline doing a wheelie. am I missing something?

[@BIZNAILEY]

absolutely!

[@benjyboba]

I dont need to use the clutch on my 900 ducati. I just open the throttle up a bit quick and its up and without doing lots of speed. I have only tried short wheelies as i dont want to starve the front cylinder of oil.

[@roossi]

I have gsxr 1000 and it does that same small lift if I use half or quartet throttle to half rpm's and then pull it quickly and pull the bike up with my hands.

[@natfx7]

One early morning i was riding my 180cc bike on a smooth empty road not to wheelie but to listen to smooth sound of engine. On the way i saw red signal so i was planning to apply break but the next moment i saw green i released the clutch without breaking unfortunately i popped a wheelie for 1sec. At that moment holding handle bars was like somebody snatching a book from ur hand. I really don't know how i did it. I cannot able to do the same wheelie again like i did at the signal.

[@Regret696]

I ment just a wheely, so doing it from a standstill still counts as a wheely and that isnt hard to pull off in first, if its a toally stock 50 pulling one in second is hard, but just practice in your first gear and then shift up or just stay in your first, a wheely is a wheely no matter how fast your going :)

[@RaymondBotha48]

and they should get a level 2 - as I can get it up in 1st and 2nd but would like to know how to go thru gears while wheeling!!