I enjoy your videos immensely. You do a wonderful job with your presentation and explanation. Thank you so much.
@Dayattherange4 ай бұрын
Thank you I keep trying different things to get better, to bring you all with me o the range virtually.
@talgov018 күн бұрын
I put an MDT Field stock on my Howa .308. It used to wear a laminated stock. When you tightened the screws, they got tighter and tighter and tighter. Then I put on the MDT field stock. The action screws turned, then they just STOPPED. Bottomed out. When I torqued, they didn't BUDGE. But the rifle now regularly shoots cloverleafs with match ammo. Using MDT polymer mags, I have no last round problems, but the mags are a bit sticky in the stock. Small price to pay.
@kentuckywindage2224 ай бұрын
Have no experience with this stock but I would try the recommended torque. I wouldn't think it would make that much difference but just for shii & giggles I would try it. Nice video. Keep'em coming!
@Dayattherange4 ай бұрын
kentucky windage the torque is just there for guidance some metal does not have that strength. I have actually seen receiver holes on the bottom of actions stretched out trying to get to the exact recommendations. I actually did get ahold of Ruger after the fact and they gave me guidance nothing more is needed than 40 to 55in pounds. Glad they got back with me because I was thinking about taking it up.
@kentuckywindage2224 ай бұрын
@@Dayattherange Hope you get it resolved. Maybe MDT will send you another or swap out so you could at least tell if it is just the stock / mag you have or all of that model. Great video as per usual. Keep'em coming!
@wisesage32894 ай бұрын
Always fun watching your videos.
@Dayattherange4 ай бұрын
Thank you
@ron85664 ай бұрын
Wow - your hand loads are amazing. Great group!
@Dayattherange4 ай бұрын
And to think those loads were loaded up in 2020.
@brett599016 күн бұрын
I had the same feeding problem in my XRS 223. 1 out of the 3 mdt polymer mags I bought had this issue. Follower issue in the mag. Also check your bolt is coming back far enough. Also the feed lips on the mag might need tuning to bring the round higher which is why I won't buy polymer mags again, because you can't adjust them. The mdt metal/poly mags are awesome.
@Dayattherange16 күн бұрын
@brett5990 I did another video it was the mag release they sent me a totally new design. They knew exactly what it was and had a fix already.
@daveb84574 ай бұрын
Looks like fun Mr. Big Guy.
@cervus-venator4 ай бұрын
Thanks for the review Eli. I'll have to look at this stock for my Ruger American 300 Black Out. I shoot it more than I shoot my two AR 300 Black Out builds. Something about a bolt action I guess. I'll certainly check out the load data on the page as well. I have some load data from a round I put together for plinking. A friend gave me a lot of 150 FMJ pulls from some old 308 LC rounds so we decided to create some 300 Black out plinking rounds with them.
@Dayattherange4 ай бұрын
CV been shooting them across the chronograph for 2 decades and keeping a log of them. Factory loads and handloads dayattherange.com/?page_id=3817
@willardscott52904 ай бұрын
The mag issue sounds more like a follower or spring issue. If the bolt picks up every round, but the last one I would think the angle of the cartridge is the issue. When the brass is stacked on brass it be angled higher at the rim. The last cartridge is on the follower and is not being lift either high enough, but more than likely angled right. It could also be a weak, short, or miss aligned spring.
@mfansail4 ай бұрын
Getting in to reloading mine too. Supers so far for pigs but subs in the near future. Liked your handloads! Keep it up!
@Dayattherange4 ай бұрын
Check it out been cataloging loads for 2 decades across the chronograph dayattherange.com/?page_id=3817
@nopro54334 ай бұрын
Sweet ! Thanks for sharing great groups Awesome to see you on the Bipod ! 🤓👍🏻👍🏻
@Dayattherange4 ай бұрын
Oh no here we go lol yeah I was proud of my bipod showing LOL.
@nopro54334 ай бұрын
@@Dayattherange Love you Man 😝
@Dayattherange4 ай бұрын
@@nopro5433 Love ya brother keep them in the X ring
@nopro54334 ай бұрын
🤙🏻
@bfox874 ай бұрын
Great video as always 👍 cant wait to get to the range for the new challenge
@Dayattherange4 ай бұрын
Let's go Brian I am waiting for your scores to come in buddy lol
@bfox874 ай бұрын
@Dayattherange I sent it in, thanks for everything you do with the challenges
@Dayattherange4 ай бұрын
@@bfox87 email me please mr.revolverguy at dayattherange.com
@oldbandfan4 ай бұрын
Check if MDT has an adjustable mag release or a longer one. MPA has an adjustable for their chassis so you can adjust the length to hold the magazine in the full upward position.
@Dayattherange4 ай бұрын
They are sending me another mag latch supposedly longer.
@CountryRimfire4 ай бұрын
Love 300 Blkout also! Nice rifle Elijah!! 😊
@Dayattherange4 ай бұрын
Awesome I am not alone then LOL
@WilliamAndrewPhilipBodie4 ай бұрын
The riffle looks cool now 😀
@gillysguns92444 ай бұрын
I had high hopes for the subs but I guess I should have expected that with herters ammo. I bet you could tune the hand loads to tighten that group up.
@Indiana4244 ай бұрын
Awesome!
@coreystock53614 ай бұрын
That thing is SWEET
@Tikka654 ай бұрын
Sub was near silent. Love the "Lets get to shootin" Not sure what the use of a blackout is, here in Wyoming the antelope are in the 150 to 400+yds range.
@tylerkoonce99024 ай бұрын
Could the magazine release have been installed backwards? If it's a little bit longer on one side than the other that could be why you have to push the whole magazine up to load the last round.
@btj19694 ай бұрын
Nice handloads!!
@Dayattherange4 ай бұрын
Yeah made me smile also
@cw2a4 ай бұрын
Nice looking stock. But that feed issue makes it a non starter here. Love the BO. 2011 was my first. I have one of very first RAR rifles.
@Dayattherange4 ай бұрын
This is the very first RAR rifles in this stock that has a very low serial number.
@cw2a4 ай бұрын
@@Dayattherange I have also have same. One if very first RAR in 300 bo.
@backyardshooters89134 ай бұрын
I would try the polymer AICS mags
@Dayattherange4 ай бұрын
Thank you I may just do that
@connerm48504 ай бұрын
What was the elevation difference with the subs? What hash mark were holding on?
@TheKentuckyPatriot4 ай бұрын
😎
@blakemontrose61114 ай бұрын
You gotta atleast use a bag big fella! Love the video.
@Dayattherange4 ай бұрын
I should have to be fair to the groups
@h200z4 ай бұрын
Leave an empty brass in the magazine first
@BenchrestMarksman4 ай бұрын
ohhhhh i like that rifle
@pitts32194 ай бұрын
The MDT XRS will pickup your rounds
@jameshalpin15804 ай бұрын
Hi from the uk I have a similar problem in my mdt xrs chassis shooting 308 win and I’ve not found an answer either hope you can find a solution
@Dayattherange4 ай бұрын
Contact MDT I did and they say they have a longer magazine latch they are sending me one I will see if that fixes it.
@jameshalpin15804 ай бұрын
@@Dayattherange hi thanks for the reply have contacted mdt awaiting a reply thanks again
@johngarrett62564 ай бұрын
Big guy you got me fired up on the old black out again I have it in a bolt gun to going in dig the barrel out and put it on.👍😀
@ranchodeluxe14 ай бұрын
Has there ever been a more useless waste of powder and lead than the .300 Blackout?
@philliplatham42564 ай бұрын
👍🏻👍🏻🇺🇸🇺🇸💯💯☕️☕️
@paulstakun82494 ай бұрын
Ruger-phooey.
@philliplatham42564 ай бұрын
👍🏻👍🏻🇺🇸🇺🇸🔫🔫💯💯☕️☕️
@CplSkiUSMC4 ай бұрын
The only reason I would ever have a .300BLK is to suppress. No good reason to shoot supersonic with it... if you're gonna break the sound barrier then shatter it!
@JamesClark-lw6sw4 ай бұрын
Some folks have only ONE rifle and are hunting LEGALLY . .SUPERSONIC 110g to 120g loads @2,1000FPS + are MUCH better killers than in game than a sunsonic load inside 200 yards.
@CplSkiUSMC4 ай бұрын
@@JamesClark-lw6sw Buddy, if I had only one rifle, it wouldn't be a .300 Blackout. I do not have a suppressor or a rifle that shoots subsonic cartridges, but I might actually like to have one... and .300BLK fits that bill, but I would only use it for that quiet work that it was designed for. I'd rather use .308 or 30.06 for supersonic or if I want to really make some noise, my .338 Lapua. To me, the .300BLK is a niche cartridge/rifle... but it's a nice niche when you don't want to wake the neighbors.
@Jeff-mv4yy4 ай бұрын
Stay with 300. The name 300 blackout is just too cool to say . It definitely adds swagger ! Nice shooting ! Disappointing that the mdt mag doesn’t feed the last round . Will another brand mag work?
@Dayattherange4 ай бұрын
Going to try another mag and MDT is sending me another mag latch