How To Build a Remote Controlled Lawn Mower

I let my husband take over my channel again. As requested, here is the instructional video on how to build a remote-controlled lawnmower.
Mower video Pt. 1: • Wheelchair User Builds...
Mower video Pt. 3: • How To Wire An RC Mowe...
**Update**
We did forget to mention the DIP switches that need to be set on the motor driver based on your configuration. Please consult your motor driver's manual on what is the correct settings for your configuration. If you have the same Sabertooth motor driver shown in this video, you can use this wizard to select your exact configuration
www.dimensione....
Parts used to create this mower:
-Similar mower to what we used in this video:
amzn.to/3nvH3JW
-Milwaukee M12 Power Drill Kit:
amzn.to/3m1DECo
-(2) 12v Batteries:
amzn.to/2vFLVl8
-Dual 25 Amp Motor Driver:
amzn.to/30p6hyt
**Alternatively, the Sabertooth dual 32 amp motor driver is the same price and can handle more power and has more functionality.**
amzn.to/3DpOrfI
**Second alternative motor driver: This one is slightly larger, but higher powered and much cheaper**
amzn.to/3IJnMuK
Servo Leads:
amzn.to/3yEI2r4
High Torque Servo:
amzn.to/2Nwtyok
-Remote Transmitter and Receiver:
amzn.to/2Wz1MND
-Rechargeable AA Batteries:
amzn.to/2JaM8jq
-Step Down Regulator:
amzn.to/3bonsjJ
-10 AWG power wire:
amzn.to/2UwGsWo
-60 Amp Fuse:
amzn.to/39h9Q8i
-Toggle switch:
amzn.to/490rjke
-100 Amp Circuit Breaker (Fuse and Switch replacement):
amzn.to/3eBmx1a
-22 AWG Hook Up Wire:
amzn.to/33MVRpO
-Deck Wheels:
amzn.to/3bnkPOO
-Battery Tender/Trickle Charger:
amzn.to/3fS3518
-You can order the back wheels and motors on ebay.
**Since first creating this video, we have gotten some electrical tools that have made this process a lot easier. They are listed below**
-Battery quick connector:
amzn.to/2MPwUm1
-Wire Stripper Tool:
amzn.to/2Y92oZr
-Wire Crimping Tool:
amzn.to/3dKz5CU
-Forked Crimp Connectors:
amzn.to/3dHjF2r
SUBSCRIBE to my channel! Visit MeantToBeLindseyB.com (my website)
**Although we are not sponsored by any of the products shown in this video, we are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.**
#rcmower
#meanttobelindseyb
#wiring

[@MeantToBeLindseyB]

Did you know you can now show your support of this channel through Patreon? Go to www.patreon.com/MeantToBeLindseyB and become part of the B-Hive Tribe!

[@surfer6755]

The mower will..Kut. thanks great video. Wish you best on your next creation

[@justinmccallister280]

I was just thinking that you could go and get a cheap home security camera system. You can get them for less than $200.00, plus they are usually 4-channel and they come with 2 to 4 wireless cameras, and a DVR recorder. You could mount a camera facing forward on each leading edge, have one for backing up, and one sitting on a mast, so you could watch from above. You can even record the whole thing. Just an idea.

[@themaximusone]

@@justinmccallister280 he could also use an old cell phone and use any app from the app store even night vision and thats pretty much free ;-)

[@hxhdfjifzirstc894]

If you included video of the mower cutting grass, it would have been amazing.

[@MeantToBeLindseyB]

@@hxhdfjifzirstc894 We show it cutting grass in the first video we made of it. kzbin.info/www/bejne/nKGzXpmgobOJbLc. After that video was made, we got so many comments about it, we decided to do this "how-to" video.

[@Chris-y8x4t]

WOW, as an amputee on my right leg, I can totally appreciate your need and ingenuity on this. Thank you for sharing your work, and story!

[@jasonglover5989]

When people like you do the homework, it makes seemingly complicated things like this ridiculously simple for people like me! Thank you sir! I love it!

[@tomriddle5037]

This guy seems super cool and creative, I wish he were my neighbor

[@Lijgaming]

This is by far the most comprehensive guide to this, this is exactly like the idea I had in my head and I can modify this to my exact specs. You on your deck are better than most “pros” in a fully stocked shop.

[@eclecticlife]

I have watched more than 30 videos of people who have done a remote controlled lawn mower. By far your video is the best one. Thank you so much for sharing all the details. Great video!

[@MeantToBeLindseyB]

John Smith That’s awesome! Thank you so much!

[@EricRobb]

Agree 1000%

[@michaelwowzers]

​i would like to buy 1

[@kailsejengkal234]

Yes. Great sharing

[@davida.longjr.6718]

I am SO FREAKIN JEALOUS that you have a REMOTE CONTROL LAWNMOWER, WOW!!! You made it look so easy and the patients you have to do it is remarkable! If you just sold the kit minus the mower...id BUY IT TODAY! Your onto something really BIG. Keep it up, and GOD BLESS YOU!!!

[@tonya9614]

When you started driving it I couldn’t suppress a smile. This is why I love KZbin 👍🏻

[@chriswright4781]

Your powerdrill start idea to replace the broken chord is brilliant, sir!

[@MeantToBeLindseyB]

Thanks!

[@hp8hp8]

This is super useful! As someone who can never get the lawn mover to turn on using a cord i tried this out and it work;great! I can mow my own lawn now! And don't have to wait for someone to come help me turn it on!

[@FishingwithRomanas]

Id be careful with starting motor with drill, possibility to twist your wrist. But as you mentioned you'll be adding extra features on it, maybe electric starter with clutch would be an idea?

[@turtle2477]

I realize I'm late on this I'm disabled myself watching this video ur a freaking genius how I can see u have engineers patience thank you for sharing the video

[@Ami-zg5xq]

Oh my goodness! What a great teacher you are. I think i can do this. Many blessings to you. Thank you for sharing.

[@greavous93]

For the past week I though this was MY IDEA! I didnt want to search online for others because I wanted to think things through without inspiration from others. Now I have a look and by no means was this my idea at all... BUT Im planning to take things a step beyond and include FPV (first person view) from my quadcopter extras and use my FPV goggles as well. So once the more is started I can go inside and control my mower from a comfy chair. Might even put the image on the big screen and make a game of it! I applaud your creativity and although my need for this is due to laziness, your solution is inspirational.

[@NspaceN]

My brother is in a chair, 15 years last Friday actually, and this was great inspiration for me to build one. He works on his '67 Camaro himself as well as many other things but the yard has been a bit difficult until this. I just finished it and will be showing him soon. Thanks a lot for your time and effort showing us how it's done. Only thing I am trying to change is I want the controls to be left stick to left motor and right stick to right motor like a zero turn.

[@MeantToBeLindseyB]

That’s awesome! And you can totally do that! You need to purchase a “centering spring” for the left stick of the remote if you’re using the same flysky model we are using. You would use channel 2 and channel 4 of the remote receiver instead of 1 and 2. Then you need to make sure you’re using the correct settings in the setup of the DIP switches on the motor driver. (You need to ensure mixed mode is off). Let us know how it works when you get it running!

[@NspaceN]

@@MeantToBeLindseyB I was searching all over to try to find that out! Thanks again man! I'll probably struggle with the dip switches but with the online manual there's a lot of good info. Oh, yes it's the same remote.

[@quintonschuelke8884]

correction at 16:18, it is a brake mounted to stop the flywheel when you let go of the bar. It has no connection to the spark plug in any way except for stopping the flywheel, it doesn't break any connection like a switch. that model actually has a set of gears to push the brake against the flywheel, i also have that piece still sitting in my toolbox too now that i think bout it. the wonders of being a hoarder, LOL. actually after editing this a couple of times i see them when you were moving the arms back and forth . im sorry i had to correct you on that, its just i had that exact engine and i stripped it down. and im not trying to dis or put down your project, i actually think that this is a great idea and i congratulate you on the idea.

[@MeantToBeLindseyB]

We didn’t know that. Thanks for the info and heads up!

[@ClatoTom]

Hello, I am from Germany and found your video. I also have health problems (COPD) and was looking for solutions to mow my lawn. (Approx. 500 sqm). Your video gave me hope that I would soon be able to mow the lawn without difficulty. Thanks for your inspiration. Greetings Tom

[@MeantToBeLindseyB]

Tom Tom That’s wonderful! Thank you for sharing!

[@nanobritech2631]

🤣🤣😂😅 you are genius. And then you come out with drill start instead of replacing string and carb. Your awesome man

[@darcybuckeridge5725]

I built an RC mower that was twin blade and used parts from an old wheel chair I got for free from a mobility shop. latter I found out on of the people that worked there was in a wheelchair himself and at the time I didn't thing of the fact that simple chores we take and hate for granted are all most impossible for someone bound to a wheelchair. so when I finished the project I returned to the place they gave me the free parts and gave the controller to said fellow and a tear fell down my cheek as I seen him light up with joy that he could do such a simple chore with ease. it it awesome to see people doing these things and sharing it with others.

[@MeantToBeLindseyB]

That’s wonderful!

[@AnnaBrownandTaiaha]

Honestly this is so cool and your instructions make it seem simple enough to follow along too. Please keep up the great work and sharing your inspirational ideas!!!

[@geoffsee]

For those of us looking for a reference, this is by far the most informative video out there to date. Thank you for taking the time to put this together

[@MeantToBeLindseyB]

So glad this has been useful!

[@Imroytc]

Nice build it gave me a few new ideas. The big spring you removed is used on a flywheel brake to stop the blade faster. Another thing you may want to add is a kill switch attached to a bar across the front so if it hits something like a curious kid it will completely shut down before it runs over a foot, cat, a small dog or anything else. Great video have a great one.

[@MeantToBeLindseyB]

Good ideas here. Thanks!

[@THEGOODRIDE01]

Maybe a " bumper mechanism" off like a robo vac or something heavier I think a regular kill switch would get crushed when it hit something harder and disable the whole unit. Yes i know the value of life VS a switch argument But why work harder and more $ when you can work smarter ? .

[@ChrisfromKeyfarm]

I watched these videos a few months ago, and now I'm rewatching them as I'm about to start another project. I love everything about this!

[@MeantToBeLindseyB]

That’s awesome!

[@HmongThunder]

Great job! Most detailed video in less than 30 minutes.

[@luvirod]

We need more videos of this guy!!!!! Genius and teacher !

[@plasmaguy5]

Sir, this is one of the best instructional videos I have ever seen. Thank you and Great Awesome job.

[@live2wheel606]

Hey. I’m christys brother. She lived down where y’all are but now she’s back in ky. I was the one in a car wreck and now I’m a wheelchair also. I’m building one of these but kind bigger. This is really helping me. Thank you for the vid

[@MeantToBeLindseyB]

Hope you’re doing well! Glad this video helps. Feel free to find me on FB if you want to connect. 😊

[@carlos-zr2xd]

Had this idea when looking for self propelled mower amazed noone has made one to sell i would definitely buy

[@danmcdonald4275]

Seriously! Why isnt this already on the market lol

[@UltraGamma25]

@@danmcdonald4275 Ikr?

[@mikebuhl8416]

as of May 2020 I just finished the build on my remote control lawn mower .and I'm extremely happy with it .I too am disabled and it is very exciting to mow the lawn without worry .well not too much worry. thanks to you and others on KZbin for the idea.❤🎉🎉😊😊😊😊😊😊😊😊😊

[@MeantToBeLindseyB]

That’s awesome! So glad you were able to create one too!

[@MeantToBeLindseyB]

*****Since first creating this Pt. 2 video, we have gotten some electrical tools that have made this process a lot easier. They are listed in the description of the video.***** ​As a refresher, here is the initial build: kzbin.info/www/bejne/nKGzXpmgobOJbLc

[@THEGOODRIDE01]

If you want to get away from the gasoline and carb maintenance. Run it off propane! I just converted one over using 1lb propane bottle, a regulator off a table top grill , a section og hose and a couple brass fittings. Starts faster, runs better and cleaner and no gummed up carb. Love your videos i rewatch them often.

[@MeantToBeLindseyB]

Great idea! Thanks!

[@THEGOODRIDE01]

@@MeantToBeLindseyB try and find a regulator off one of those small grills that has the adjustable knob to regulate the flame that way you wont need a inline valve, Also get a brass 90 elbow and drill a hole the size of the end if brass in air filter cover directly over carb leave filter in , Now attach brass to cover ( How i did mine is i drilled a hole big enough in end of brass for a quick pin or cotter pin i put the brass thru , then a large flat washer and the cotter pin ) Attach your hose from that to the regulator, empty gas from mower, To start turn on gas at regulator untill you can just about hear it. Should start on first or second pull. Your RPM is now regulated buy your propane regulator. Just find the mowers sweet spot. Good luck

[@walterlopez4391]

You did a great job at explaining and solving some complex problems and have inspire me to try making something like this . Great job thanks man.

[@ryanmalin]

Nice work on the RC conversion brother! On a different note, my Uncle broke his neck about 8 years ago. Drs said he would never walk. He is able to drive a car and stand on his own two feet now! Im glad he didnt give up after his injury.

[@MeantToBeLindseyB]

Ryan Malin So many people struggle after their injuries. Glad he didn’t give up though!

[@JohnJTymn]

Thank you sir and ma'am, I am about to commence a build of my own and your explanation and instruction has helped me greatly with my preparation. Thank you for your contribution, all parts were purchased through the links provided.

[@thisolesignguy2733]

lol when I heard "and the bolts work just like you expect bolts to work" I can picture someone actually stopping the video to google it pfft i cracked up

[@AGW69]

Same here.

[@seanmyers227]

Wow man! This is absolutely sweet. Its elegant and seems reliable and easy to service. A lot of people build really complex systems that are over my head as a beginner but this is really cool and not over though. Really neat, thanks for making the video explaining everything

[@bijjames]

Incredible work, man! Thanks for sharing this with us. You’re a genius! Much support!!

[@Its_Me_Wheelz]

As a wheelchair user trying to figure the grass cutting thing out. You Sir. have helped in that area. I happen to have an extra electric wheelchair not using with 2 good motors and batteries. Have the mower! So now to order the rest and by this weekend I will be sitting on the porch cutting grass! Wo0t.

[@MeantToBeLindseyB]

That's awesome! Good luck!

[@anhluong9374]

holy cow, much respect for you, I'm really impressed

[@adub7778]

Bro your a genius! It amazes me how the handicapped have this stigma of helplessness when in actuality they can do everything other people can do and often better! Keep up the good work and maybe consider marketing your creation;. It seem to me this could help a lot of people with limited mobility!

[@davidreynolds4684]

I did this out of bordem and laziness. Scared the shit out of my neighbor when i taped a dummy to the handle and mowed his yard three houses down and across the street dragging the dummy me several times back and forth across the yard before mr noey got outside to save me. It was funny as hell at the time. Sorry Ben. Rip. You were a good man. No i didnt kill him. He passed away years after my mowing job.

[@stefaniehunt5199]

Hahahahaha

[@brentbarnhart5827]

I'm an automation engineer, I travel the world automating factories with my ingenuity. I say "ingenuity" instead of intelligence, it takes both, but I work with some of the most talented engineers around. BUT they are not the vision, many times I have to rely on them for the calcs and things where I fall short. Let me say to you: CONGRATULATIONS on an AMAZING well thought out, executed machine. I logged in, because I wanted to learn from your automation. It's not about learning from only "the smartest people" learning, is about learning from EVERYBODY. This is NOT directed at you, but I have always said, "i can learn something (maybe / probably) (at least I try) even with the most inexperienced people who I am there to train. My goal is to learn something, from, EVERYBODY, no matter how simple. It just keeps making me smarter, and KZbin, other than the asshole trolls on here, is a great place to start. You can make a LOT of money doing this kind of work Lindsey. Start advertising some of your "inventions" don't worry about "patents" most not worth the powdered to blow them up. All someone has to do is change the slightest thing and you are screwed, it's a hole you don't want to go down. Start selling your items, keep polishing them up as you go. I have many invnetions that I've sold for almost as much as I do now, and they are VERY ROUGH, but they work, JUST FINE. Those same ones today are very polished and make me look good. but those early customers didn't care, they just wanted me to save them labor. Your audience "might be" the incapacitated, HOWEVER, there are plenty of people like myself who might have fun purchasing such items as well, or even older people. So its hard for me to say. but ltitle by little, start adding items. All of my items came, when people requested I custom build something for them. 50% UP FRONT I give them a GUARANTEE it will perform as outlined in the agreement. They get a VIDEO and high rez photos, and any other documentation to satisfy themselves when I am done. 50% BEFORE it ships. I'm always paid UP FRONT before it is released. Even when it is $1 million usd, I'm not the bank. When they say, "we'll find someone else if you won't" I tell them, "Please do." (THAT almost never happens, when it does they always come back.)

[@MeantToBeLindseyB]

Hi! Thank you for taking the time to leave such an encouraging message. My husband (Wes) wanted to create this, so I wanted to give him the space to share it. With he and I both being wheelchair users, we immediately thought that if he could create something like this then it would be such a quality of life thing for us personally. I/we would love to do something amazing and special with this project. We have some cool ideas. I've just been scared to venture out into the "business" side of it all, so I love your input. I find it extremely valuable because we aren't nearly as experienced as you (and some of the other viewers out there).

[@brentbarnhart5827]

@@MeantToBeLindseyB Well, one thing that I caution would be safety in your creations. I don't really deal with "joe homeowner" I do deal with "joe operator" but they also are under the care of a corporation with rules, bosses, and guidance to keep them "out of danger" as well. HOWEVER, I have a responsibility to make sure I've protected them as much as possible. I'm not sure what all liability you could get into with a self propelled lawnmower, if somebody would buy one, lose control and run over the neighbors kids foot. THAT would be my personal worry on just "that" invention. But your husband seems to have a knack or working knowledge of such things, and could easily put that to work in many other things. From helping companies automate their lighting, to whatever. I was looking to modify an electric wheelchare as my "tool cart." Something I could comfortably sit down on in factories, and easily "tool around on" that also had a small area for my tools, and a place to mount my computers. I just bought a used, very small, but heavy made cushman work cart, to eventually modify a little. I just simply couldn't find the wheelchair parts and such to make such an item. You guys probably know "all the haunts" to find those motors, and parts, and to be able to rebuild chairs, deck them out, etc. etc. So I'm not sure how to advise, or even if you have any desire TOO do such a thing, but all he would need to do, is spend some time, come up with various idea, narrow them down to the best, and the best, and the best. And start to assemble them, some prototypes, and slowly get going. I have some GREAT ideas, I don't sell much of. Other ideas are GOOD, and they REALLY took off, and I didn't expect it because the field is HUGE. I can tell him great ways to manufacture custom parts, and cheap / quick vendors, and cheap ways, to draw them up digitally. If he so wanted. I do travel worldwide a lot, but I could easily work and never leave my farm. (Which that is the case for many months out of the year, it just depends on what I'm contracted for at the time.)

[@MeantToBeLindseyB]

We’d love to connect with you privately and chat if you’re up for it. If so, shoot me an email to [e-mail] - I’d love to pick your brain on a couple of things (if you’d be up for it). No pressure though. You’ve already been a great source of information for us, so thank you for that!

[@brentbarnhart5827]

@@MeantToBeLindseyB I sent you an email, you can delete the above if you want.

[@MeantToBeLindseyB]

@@brentbarnhart5827 Hey! I didn't get an email from you. Can you re-send it?

[@dirttdude]

You see, it's a dream of mine to sit on my back porch and watch the lawn mow it's self and watch the wife empty the bag, this is a really good start! Next i need something to take the trash out automatically when it detects nagging.

[@alexblanco9687]

😂

[@SirFrag32]

There are roomba-style automatic mowers now.

[@dirttdude]

@@SirFrag32 Really? Please tell me that it can detect nagging!

[@SirFrag32]

@@dirttdude Not that I'm aware of, but you can schedule it!

[@1BlubeTube]

You are brilliant Sir, I thought of something like a RC Lawnmower, but not as good as your ideas.

[@troyd-motorsport9933]

Thats rad! thanks for sharing, you could even try to add a tow bar and connect your wheelchair for a bit of fun :D

[@arminbender8702]

LOL that would be fun

[@arminbender8702]

Or how about a grass catcher so you don't have to rake the yard being in a wheelchair that would help a lot leaving your grass clippings on The Lawns can cause it to create moss and choke out your grass

[@troyd-motorsport9933]

@@arminbender8702 I'm a massive fan of the lawn mower with a built in mulcher. My grass has never looked so good

[@czechmatey]

I'm completely clueless when it comes to all of this, but I'm going to try my best to get all these parts and make this as a gift! I think I can manage. lol Thank you for explaining these concepts in such an easy to grasp way - especially for people like me! ♥

[@MeantToBeLindseyB]

Be sure to also check out the wiring video too (linked in this video’s description) if you need help with the wiring.

[@danasixty4012]

Necessity is the Mother of All Inventions , God Bless you , Son .🇺🇸🇺🇸🇺🇸

[@jamescollins9121]

Your page is legit. I intended to use a very similar set up. Keep making content as authentic as this bro! Subscribed!

[@jameswhiteman413]

Good job, now i no how to do it, thought it was easy, just power the 12v to 6v for the esc and stuff.

[@nelsonfigueroa5609]

God bless both of you guys. Hope people hire you or you setto sell these kitsin the future.

[@williamdavies1977]

the only thing it's missing is a Patreon account, and an Amazon wish list for the audience to help out directly.

[@AquaCarb]

I would suggest getting an Amazon Prime account.

[@BenchmarkRadio]

Yea add the parts list using (affiliation) so we can buy you coffee

[@MeantToBeLindseyB]

Did you know you can now show your support of this channel through Patreon? Go to www.patreon.com/MeantToBeLindseyB and become part of the B-Hive Tribe! We are also working on putting together an Amazon Influencer page as well.

[@heavytank2]

@@BenchmarkRadio This is cool, I didn't know it was a thing. This gets me pumped about helping others.

[@billyvon666]

Bro you rock. when you said add a Cam so you can cut the grass while sitting on the couch in the house. You can be the AMAZON OF LANDSCAPERS. bUILD with your talent .an army of remote mowers.

[@MeantToBeLindseyB]

Here is part 3 where we shows how he did the wiring. kzbin.info/www/bejne/oIKxm36Bd8qBftE

[@AquaCarb]

The parts are in except my mower, the wheels, and the motors. excited to get started!

[@AChi__]

Excellent build. Only changes I would've further considered is to make sure to mitigate rusting of its components by using galvanized bolts/screws, nuts and etc (assuming you already didn't do that), and also I would've secured a plastic protective housing (aka gladware with a top cover) on the wooden board and then placed the electronic components inside the gladware and passed the wires through hole(s) in the top cover and/or the gladware itself. I would chock a cut up piece of plastic bag in the hole with the wires, to keep the interior of plastic housing dry and to keep the electronic components dry and rustproof and protected from effects of the weather. Alternatively, instead of using the cut up piece of plastic bag, I could insteas use a rubber gasket placed in the holes for passing the wires to also achieve the weatherproofing function too. With that said, great job man, keep it up.

[@MeantToBeLindseyB]

@@AChi__ Those are some great suggestions! We have noticed some rusting on some of the bolts. Luckily, the mower stays in the garage most of the time but we will keep this in mind. Thanks!

[@AChi__]

@@MeantToBeLindseyB Great!

[@claybornlewis276]

You are the man no doubt about it most people wouldn't have wasted their time answering me you gave me more information than I needed I'm on the job I found an old jazzy wheelchair on marketplace for $60 I can get the rest of the stuff off of Amazon pretty cheap thank you very much for the help maybe I'll put a video up when I'm done of course I will give you the credit but me the credit for the build LOL thank you very much for the help I surely appreciate it keep building

[@astrochef7766]

Now this is a diy project I can get behind. Amazing ! Work smarter not harder !

[@VictorPoulin]

Love you and your imagination.

[@chemis99]

I just watch this video, this is a Great job ! I am looking to convert my lawn mower from gas to electric. I will look the parts to buy.

[@MeantToBeLindseyB]

I wish we had suggestions on kits for that but we don’t have experience with that unfortunately. Good luck on your project though! Let us know how it goes!

[@franciscourena5636]

**** Outstanding Presentation****

[@Zfrostyone]

I enjoyed your build. I may have to try that on one of my mowers in order to mow steep ditch banks. Keep of the good work.

[@charlessanders1342]

I see a movie coming..The killer mower" fall asleep and mower ends up 6 houses down mowing thru gardens etc. Lol

[@manimotard5429]

This is by far one of the coolest things i've seen in awhile. Awesome how he explains everything in detail , fun project!!!

[@dirkbilliot3829]

Lol for the turning wheels aka caster wheels you could have heated up the adjust lever and bend it so you could attach the wheels vertical instead of horizontal but I'm sure you got it since it was posted over a year ago lol

[@RGCbaseace]

Awesome build, sir. Consider running it on propane. Yes, the little green bottles mine runs very well 3-4 mows per bottle it only got two mows per tank of gas and is much quieter and smells like a forklift you'll need is a regulator I used one from a deepfryer with an adapter for green bottles one end is the bottle the other end goes thru the aircleaner box almost to the carb intake that's it in a nut shell my mower didn't have a adjustable throttle just run and off now it does the gas regulator knob

[@MeantToBeLindseyB]

Great idea!! Now we have a new project for this spring! Thanks!

[@BerryTheBnnuy]

As long as the generator is good enough, you should be able to power the motors off the engine. It'll reduce fuel efficiency by increasing magnetic drag on the generator, but it'll work.

[@savage6394]

Push mowers don’t have a Generator.

[@WaterWhiteTuber]

Regarding battery life: You may be able to use a single U1 Battery. It's about 12v 35Ah battery. You could probably turn the battery 90 degrees and place it centered behind the engine.The extra battery weight may even help with wheel traction. Since your electronics are on a piece of wood, You could probably mount that on top of the U1 battery. It's just a thought. I love your simple, quick and easy design. Almost anyone can do it. I would love to see all the add on you mentioned too. This is the exact mower that many people need ! Thanks for sharing :-)

[@MeantToBeLindseyB]

Thanks for the tips!

[@frozen_tortus]

this is absolutely awesome!

[@SOPHOCLESIFY]

Genuinely one of the best and most informative videos I've seen on KZbin, well done 👍

[@feralbigdog]

add a small alternator, keep the batteries up

[@richardbaker_0086]

Yep 👍

[@alexwesley9863]

Awesome you are awesome dude I am a dialysis patient I run out of steam mowing I am an ex computer tech this is a good needed project way to go impressive.

[@MeantToBeLindseyB]

Thanks! It has definitely been a game changer for us. We've saved so much money in the long run too.

[@petrus19881]

This is a mini zero turn, impressive

[@AdamzStudio777]

Honestly, this video is kick ass finally something that a disabled individual can benefit from using. Do you sell this yourself? If not, you should. Thank you for sharing this. I am definitely going to build something like this. It is very difficult walking around my yard trying to mow the lawn with a walker or a crutch.

[@MeantToBeLindseyB]

We do not sell them. But we wanted to share the idea and inspiration with the world for people like you! Let us know how your build goes and if you have any questions that we can help you with.

[@AdamzStudio777]

@@MeantToBeLindseyB I definitely will. I did find another video that shows a gentleman that did something similar but they used the electric mower and I know on the other video your husband talks about wanting to do it with the electric mower so I think I might go that route using your idea maybe combining the two and see what I can come up with

[@MeantToBeLindseyB]

That would be cool! Let us know how the build goes and let us know if you have any questions that we can help with.

[@AdamzStudio777]

4:46 at this portion of the video I was just wondering if he added the threaded rod to connect the two gears in the back? Did the gears already have a hole in them or did he have to add that? The gears I have and the ones I’ve seen do not have a hole like that to add the threaded rod so I was just curious thank you.

[@MeantToBeLindseyB]

@@AdamzStudio777 Yeah, the motors had those holes already. We used the threaded rods to give them strength and some adjustability.

[@The_Joker_]

Last time I’ll loan him my mower 😂

[@feralbigdog]

if he returned mine like that, id loan him other things!

[@philliphall5198]

Me to, he is a winner

[@fentoncs]

Well done! I did something similar in 1988. You covered all the issues very well. I put casters on the front at the outset. It worked well. My only suggestion is to mount the battery behind the drive wheels. This will take weight off the front wheels and allow them to pivot and it will increase traction on the rear. Good luck and have fun!

[@MeantToBeLindseyB]

Since this video, we did actually switch to rotating casters in the front. It made a huge difference!

[@eamonnfpv9588]

Did you ever get a camera system set up? I’d love to help with that! I have FPV (First person view) equipment Id like to donate and if your not to familiar with it I could show you how to set it up although with what you’ve done here I’m sure you’d be able to handle it 😉. Great video. Thanks for sharing.

[@MeantToBeLindseyB]

We haven't gotten a really good camera setup yet. We'd love to take you up on your offer if you're serious. Send me an email and thank you in advance. This is an incredibly generous offer. :) [e-mail]

[@mariowario5881]

I'm hear because I remember watching "Honey I shrunk the kids" as a kid and wanting the lawnmower so bad even though at the time I didn't have a yard. Great video now I'm planning to build this beast 😁. PS you got to put FPV on this thing.

[@CocoChanelle-1]

You can sell your idea to a manufacturer. File a patent and document your idea.

[@Bimmerrx7]

This was one of the best diy explanation videos I’ve seen. Thanks!

[@jfrede1976]

Uhh i see another use for old Hoverboard Wheels. :-)

[@Rocketyt]

Wow!! what a great video. Excellent visuals and audio was spot on. His voice has a calming effect which I like when I'm learning something new I've been dreaming about doing something exactly like this for a long time. I've been in high tech all my career and last 15yrs was for HP R&D for learning how to build computers a year in advance. I'm a real gearhead too. My hobby has been building and repairing cars. So with your Video and my eagerness, by golly, I'm going to make one this Summer!!

[@MeantToBeLindseyB]

Can’t wait to see yours!

[@leonardcubit5715]

Don't cut yourself"down your BAD";";";MAN

[@destinswiger7568]

Awesome job building that rig! A remote controlled diy mower seems like a difficult task but you make it look easy! Now I just need to build my own

[@MeantToBeLindseyB]

Now you know how to. :)

[@davidreynolds4684]

I mean absolutely no disrespect to you but ive been in those chairs and it sucks but other than putting snow plows on them i would put a mower deck under one next time. Maybe a brush hog type. Complete with a tow behind bagger. Good video. Well displayed and explained.

[@jonathancortneydisselkoen3047]

Thank you! This video has put me on track to do this project. I can’t walk much anymore, so I’ve been wanting to build an RC mower to save my energy.

[@kevinjoshua4944]

You are amazing!!! I can no longer physically mow my hill backyard but you have inspired me to remotely cut my yard the way I want it cut. I have a 4WD mower I would love to convert

[@MeantToBeLindseyB]

That’s great! You should definitely do it!

[@altarwork]

I’ve gotta say… man, you’re a genius!

[@bobx3646]

Thanks! Love your instructional video, you to steped through the instructions very well. The wheelchair motors are comin tomorrow. I tested the remote with small dc motor and servo motor. It's all setup for the motor tomorrow!

[@MeantToBeLindseyB]

That's great! Good luck!

[@hellohello8556]

Hello from Australia🇦🇺. Great video and great build mate. Thankyou for teaching us how you did it. 👍

[@warrenfloyd1484]

So cool, I built one after crashing my model plane, it was nice to sit on the porch in the shade sipping iced tea, and cut the grass, I subbed😎

[@jorg167O]

I'm looking for something like this and your explanation are the best a saw. The electronic part was what I'm looking for 😃👍. I keep all the link to build my own machine. Great work 😃

[@MeantToBeLindseyB]

Let me know if you have any questions.

[@DavidJohnson-ex3fu]

Oh my god brother! You are a man after my own heart when it comes to inventions. The next car that I purchase, it will run 100% on water oh, you know, hydrogen. I will share that with you and everyone else on KZbin when I do that, but I will share it with you especially! Stay tuned for the Davey J channel

[@brandonlee8400]

Excellent communication. I've seen that the kill switch is a ground, the spring arm is moved where the bracket shorts the coil IIRC.

[@brandonlee8400]

To add: you could use a bosch style relay and have the signal send ground to that handle-bar kill switch, which already has it's own wire.

[@MeantToBeLindseyB]

We’ll look into that for next time. Thanks!

[@theodorebowers9737]

🙋🙋 know this is not new but ,came on to ya , now cool , love to build this Have have all tools welder so on . things just happen can not get free help there No honor a best friends . 😪 O. Big time. Can't get down the Yard I just seen You are in a chair . What nice to cut the grass for my wife. Love your videos and new cool guy . Thanks great job. 💯 ❤ Made in the USA. 🇺🇲

[@njjimslack]

Creative & impressive work. Yeah front wheels like on zero turn mowers would be perfect. Now you made me look at my old manual push ego mower with a "hmmm should i..." lol

[@Xerom]

I have been wanting to build one of these for years, but put it off because it seemed too difficult. I even have a mower i set aside for this project. After watching your step by step video it gave me the bump I needed to order the parts and make it happen finally. Thank you so much for sharing and keep up the great work. Also thank you for posting a parts list!

[@77chevy4x4]

You’ll love the ryobis! I have one for two summers., it’s the way to make it .. ! Motor driver would work perfect with the rear wheel drive it comes with!

[@mckrackin5324]

Brother, you just gave me my next project. I have a bunch of trees that are super low to the ground and eat me up when I mow around and under them. Thank you so much.

[@Saddletramp1200]

You are making every poor home owners dream come true!

[@lennienims4446]

Great idea. I want to see a second video of it in action

[@MeantToBeLindseyB]

This was actually video 2 of 3. We show it in action on video here: kzbin.info/www/bejne/nKGzXpmgobOJbLc

[@Robs0475]

Ohh its sooo on, you explained this to good, lol Im never leaving my porch again Awesome… Awesome job man

[@MeantToBeLindseyB]

UPDATE: As this has been a learning experience on the build, we plan to continue to make changes and upgrades and continue to make this as safe as possible. As suggested by @WV591 below, we will be upgrading to a 100 amp fuse soon. As a reminder, we are not sponsored or endorsed by any of the companies or products shown in this video. However, we are a participant in the Amazon affiliate program which is designed to provide a means for us to earn fees by using our affiliate links through Amazon. We always want to encourage safe practices, so if you're interested in doing the same, feel free to order the 100-amp fuse (instead of the 60-amp fuse) through my Amazon Affiliate link here: amzn.to/2xRTGWw

[@WaterWitch83]

Have you thought about a circuit breaker instead? Here's one rated for 100 amp. It could replace your fuse and physical switch. www.amazon.com/dp/B07SN3WDVC/?coliid=I2W0RVFA3BHL8X&colid=1CSN4PO5O22MR&psc=1&ref_=lv_ov_lig_dp_it

[@MeantToBeLindseyB]

That's not a bad option. Thanks!

[@MeantToBeLindseyB]

Nameless One We are definitely talking about Pt. 3 to address that and couple of other things. If you need help in the meantime, feel free to email me at [e-mail] and we can see if we can help you out.

[@wenepzoli]

Great creation and inspiring! The machine is a fantastically creative solution!I wish everyone a successful, beautiful day and weekend in strength and health!

[@K4mikze]

this is the coolest thing i seen in my life!!!!! man you are a genius. THe lazy person in me is ordering everything right now :))

[@robertedwards2453]

Nice video with great info. I've been thinking of doing this also but I want it to have tracks. I have a bank that I always have to weed eat. A build like this with tracks will be perfect.

[@brandonlee8400]

me too, it'd pay for itself in one season