It would be nice if you guys would label the nut and bolts baggies so I know what goes where as far as the hardware
@connortivoli31613 жыл бұрын
Love the kit building videos, when the time comes I'm sure my rewind button will be broken. Will you guys be offering the frame only MB-200? I like this one but the rear suspension is major selling point, plus it's a stock rear suspension, not one that I rigged together using an old piano and refrigerator parts in the backyard ;)
@WreckedHer Жыл бұрын
Why send out a kit with a screw that doesn’t fit? It’s not long enough.
@slowmissouri205 Жыл бұрын
5/16-24 thread and 1 1/2" long. Get grade 5 to 8. It is missing in all of the kits. I now have ten of them..
@delta96763 жыл бұрын
y'all should do a video showing to process of putting together a stage 4 predator 212 engine
@THEMOWERMEDIC1 Жыл бұрын
my next build
@iuitsofficialblog12 жыл бұрын
Hey my tillotson 212 kit 1 have a keystart is there any videos on how to do the electrical work for it..
@GoPowerSports2 жыл бұрын
We made a video series just for you! Check out Mega Moto 212 Light Assembly on our channel.
@mr.braapalicious3 жыл бұрын
Really Looking forward to getting mine put together! Thank You!!!
@stephenmendes7640 Жыл бұрын
Just finished building my mega Moto 212 followed your video step-by-step. It was very easy. Thanks for the videos. Much appreciated. 32:01
@GoPowerSports Жыл бұрын
Glad it helped
@NubsWithGuns7 ай бұрын
I never thought of tucking the wiring in there where he did, it was obviously setup for it now that I looked :P
@joeherrick25303 жыл бұрын
My disk doesn’t seem to fit in the caliber, any way I can loosen it?
@joeherrick25303 жыл бұрын
Just needed to press it open with some pliers
@AnGryCruizer3 жыл бұрын
a nice freSHie !!!! u Know how easy it would be for hem to add a swingarm with a couple cheap shocks
@slowmissouri205 Жыл бұрын
I wish they had this. It would be tough with the frame, but make the bike perfect.
@allhaildoge21153 жыл бұрын
Any ideas for mounting a battery if you did the electric start Tillotson?
@slowmissouri205 Жыл бұрын
I was able to fit a cheap "Voltage battery tray" behind the jackshaft. I had to trim an inch off the rear fender for battery clearance, but it snuck right in there.
@struggleranch94423 жыл бұрын
How do you wire the headlight to work with this identical setup?.
@charlesyates66873 жыл бұрын
Sure that greese is going to work on the headset ? I mean like the headset gets awful hot . Lol
@donkeyhole27822 жыл бұрын
The jackshaft install portion in this video is flawed. It starts with the little sprocket, then somehow switched to the pulley is on instead and the sprocket not. First there was no washer and now there is. I am trying to install mine now, but confused.
@GoPowerSports2 жыл бұрын
Mini biking ain’t Eazy for some. Give us a call and we can walk you through it.
@donkeyhole27822 жыл бұрын
@@GoPowerSports It isn't about my skill. I have that. And don't misunderstand, the overall video is helpful. I built mine up to the jackshaft before I ever saw this video. I am simply discussing the jackshaft portion. It wasn't coherent in steps. Also, my kit came with one washer that centers on the shaft while the others are all too large and do not center. The shaft, at least in my kit, is not designed specifically for the bike. That is why you have to put washers in a place that interferes with the key syncing up with the shaft (just following instruction). It will work, but it would be better to have the shaft machined for the bike perfectly. Also, in your video, your shaft slides right in place through the bearings with ease, while mine had to be gently, but firmly hammered into place; it is tight in those bearings and nothing easy like in the video. I will have to hammer it back out. When I do, I'll attempt to clean up the shaft for an easier entry next time. I am now making my own washers that center on the shaft. Actually just modifying some that are slightly smaller. In the future, instead of using two washers to allow the gear to be tightened, I may just machine one spacer for that job. I'm running the gear right up against the inner bearing race; it seems to work fine and is the best configuration for the hardware in my kit. The bearings didn't feel good at all, and FatBuddyCat said that would be the case and gives his theory as to why. In any event, I already purchased a new set of bearings and when I get done, my shaft should spin like a tiny dancer if tiny dancers spun horizontally. I love the bike. When I am finished, it will have no issues in the drive train. I like the look of the headlight, but I have something else in mind for head lighting. Too much glass on that big beauty of a headlight. Maybe I can sell it on eBay to someone who broke theirs some day. I anticipate the torque converter install might trip me out for a moment or two, since I have never had one before now. The torque converter looks like a beast of a mechanism. There is a fair amount of mass in this drive train. Looking forward to feeling how the drive train works. Still, I feel the need for a hot rod, straight chained, centrifugal clutch street racer. But first, I have to get this mm212 beast to wake up on its feet. The only thing that will be as much fun as riding it will be figuring out what custom colors to put on it and where.
@joshvandruff17903 жыл бұрын
Awesome build. Very clean looking bike. Might have to get me one.
@thebrickcitysouthernbellpr3789 Жыл бұрын
Does anyone know the weight capacity of this bike?? My son is 15yrs old 180lbs.
@GoPowerSports Жыл бұрын
This will easily pull a 300 LB person.
@psalm2forliberty577 Жыл бұрын
I have a lightly used Predator 212 from a dead log splitter. I'm thinking to get your Mega Moto Mini Bike kit. Then add the Stage 1 kit + hotter cam + charging coil + delete governor. What do you guys think wouldn't that be a nice build plan ? As an aside: I was kinda stuck on the full suspension 200X idea BUT realized that a "hardtail" may not be bad. On my Mountain bikes I prefer Hardtail, so here why not ? I just think you slightly lower rear tire PSI to soften bumps. Love any input y'all can offer up.
@GoPowerSports Жыл бұрын
I'd love to see it!
@devinrodriguez46812 жыл бұрын
I ordered mine 2 days ago and it still says “Awaiting Fulfillment” what do I do?
@GoPowerSports2 жыл бұрын
I'll look into this!
@GoPowerSports2 жыл бұрын
I see your order was placed yesterday, should be leaving on Fedex either today or tomorrow. Thanks!
@larryguevara33503 жыл бұрын
This things a tank . Heavy duty.
@billydonnelly7378 Жыл бұрын
Should show different size people. I’m 6’1 and thinking of getting one. Will it fit me ok?
@GoPowerSports Жыл бұрын
This will definitely fit you. It'll feel like a comfortable cruiser.
@1GoPowerSports7 ай бұрын
I have ordered this mini bike frame kit and I got a predator 224 for it and it’s a blast thank you for making my days better
@GoPowerSports7 ай бұрын
Glad to hear it, enjoy!
@MilesManSk8Ай бұрын
So I’m getting one of these and I’m wondering what kind of mileage they get?
@GoPowerSportsАй бұрын
I'm yet to see one fall apart. As long as you take care of this minibike, it'll take care of you.
@cooinwithkobe18233 жыл бұрын
Can some one please help me what’s where can I buy the rear brake caliper
@jamescirillo5343 жыл бұрын
I may have missed but which wire do I connect the coil too for the headlight please send help
@MrKid-zw5ep3 жыл бұрын
Awesome bike, was wondering if you could fit a Tillitson 212 with electric start in there or a Duromax 440cc 16hp engine. Saw a video of a guy doing that. As I do want to buy this kit very very soon!
@nathandixon50203 жыл бұрын
Yes u can fit a tillitson 212e on there it will be a tight fit tho. If u want to know where I put the battery or have any other questions let me know.
@MrKid-zw5ep3 жыл бұрын
@@nathandixon5020 Yeah where could I put the battery, right next to the jackshaft? Also would I need to run a small alternator since I wanna run some Led lights, tail lights, electric start and possibly some other stuff. Or would the charging coils be enough to charge the battery from the Tillotson
@jamesharaldson3753 жыл бұрын
@@nathandixon5020 Yeah where would the battery go? zip tie it on the frame in front of the gas tank? or somewhere else?
@nathandixon50203 жыл бұрын
@@MrKid-zw5ep u know where the 212 plaques are on the frame my grandpa and I built a little wood box for the battery and we just zip tied it do the holes that connect to the 212 sticker plaques
@nathandixon50203 жыл бұрын
@@jamesharaldson375 .
@soakingorganic36482 жыл бұрын
I want one how much in whole plus labor putting it together? Where in USA YOU AT
@GoPowerSports2 жыл бұрын
Texas. We have a few of these on our floor ready to ride out
@soakingorganic36482 жыл бұрын
@@GoPowerSports yes I want. How much and do you ship to Massachusetts?
@davidruiz2248 Жыл бұрын
What torque converter are you using? Base 30 series (8hp max) aren't rated for even the base Tillotson 212E horespower output (9+hp).
@GoPowerSports Жыл бұрын
The stock 30 series will still work but the best case scenario is to upgrade to the Juggernaut Driver, along with taking out your engine's governor.
@davidruiz2248 Жыл бұрын
@@GoPowerSports Thanks!
@freerangehuman70163 жыл бұрын
Trying to reach out to you guys with some questions before purchasing a mini bike kit but no one’s answering the phones set an email as well.
@enjoiboy3853 жыл бұрын
How long do you think the stock of these kits will last? I want to get one in a few years when I have a place to ride.
@mten89653 жыл бұрын
👍😎
@NubsWithGuns5 ай бұрын
In hindsight it's a pile of dog shit that I wish I never bought.
@GoPowerSports5 ай бұрын
Minibikin' ain't eazy.
@MilesManSk8Ай бұрын
Just order mine can’t wait 🤘🏼🤘🏼
@GoPowerSportsАй бұрын
Hope you enjoy it!
@rileywallace26093 жыл бұрын
What the bolt for the clutch mine didn't come with it and it's the last one
@GoPowerSports3 жыл бұрын
That bolt typically comes with your engine. If it happens to be a Predator or Tillotson 212, this it'll be a 5/16" fine threaded bolt. Around 2" long should be enough.
@MJ-is1zy2 жыл бұрын
Can you fit a 224 in here?
@GoPowerSports2 жыл бұрын
Yes you can fit the 224 in this frame.
@shallow86432 жыл бұрын
I'm having problems with mine my jackshaft bearins fell out idk what size they are and Is there any way u can tell me the key size for the torque converter?
@GoPowerSports2 жыл бұрын
5mm jackshaft key. And 6003 Bearings.
@shallow86432 жыл бұрын
@@GoPowerSports will a 5mm x28mm long work?
@MidnightMaker2 жыл бұрын
Seriously, one of the best instructional videos I've ever watched. Thank you!
@GoPowerSports2 жыл бұрын
Glad it was helpful!
@jameswest6857 күн бұрын
I had that helment! Circa 1972.
@GoPowerSports4 күн бұрын
Bangarang!
@MRGreen79 Жыл бұрын
Just FYI if you buy a tillotson 212 electric start and start putting your stage one kit on. The rubber gasket for the carb adaptor is not included. I had to swipe one from my predator 212 still in the box. For 1000 dollars, Go Power Sports should include this.
@GoPowerSports Жыл бұрын
Thank you for your insight, I'll get this information in the right hands.
@groskreutzzdsinn177 ай бұрын
Y'all should put together a tool kit specific for assembling these mega moto kits! I would pay $$$
@GoPowerSports7 ай бұрын
Noted, thank you for your feedback.
@seanmason55352 жыл бұрын
I installed the TILLOTSON 212 engine. After assembling all components of the driver/torque converter, the original bolt on the shaft is too short and cannot reach the threads. Any idea what size and length will work?
@smokerslounge8880 Жыл бұрын
i think its 5/16in 24 x 1-1/2
@stevo55213 жыл бұрын
Thanks for showing the T-bar exhaust support and how it installs.
@jasonphillips56452 жыл бұрын
Will this still work with a predator 212
@GoPowerSports2 жыл бұрын
Yes it will work
@GoCartMechYerf9 ай бұрын
Stock Driver/Torque converter bolt was to short. Thankfully my Yerf Dog 3002's Tecumseh had a bolt long enough. Does anyone know why Tecumseh went out of business?🤔
@donkeyhole27822 жыл бұрын
Well, I have the engine installed now and finishing details. Curious, I also bought a Tillotson 212 engine from Go Power Sports along with the MM212 bike. The engine, assumed to be new, had fuel in the carburetor. Is that normal, or did someone put a used engine in a new box?
@GoPowerSports2 жыл бұрын
That is normal, they do get tested at the factory, drained, and then sent out. There may be a little gas there.
@donkeyhole2782 Жыл бұрын
@@GoPowerSports : I've been riding the MM212 for many hours. It's been a year. I have been site seeing my rural area and the bike is terrific. The hard tail is also great. I never have any chain problems. I run the rear tire a little soft, and it rides just fine.
@Thirsty_5.02 жыл бұрын
I bought the same bike. Now has Fully built motor over size flattop w/ the works, I added juggernaut. It feels like I am maxing out my rpm quick. Am I running out of gear? Any suggestions? I don't want to go backwards and remove the juggernaut. Any help would be greatly appreciated!
@GoPowerSports2 жыл бұрын
Send us a video. If you're flying down smooth pavement, maybe drop down to a smaller rear sprocket.
@Thirsty_5.02 жыл бұрын
@@GoPowerSports thanks I called in yesterday 9/6/22 and Scott helped me order 2 sets of adapters and 2 piece sprocket. Hopefully it will balance it out a bit more, going from a 54 tooth to a 42 tooth. #pbkmotorsports
@livingukrainianinrussia74613 жыл бұрын
Классное видео продолжайте снимать видео такого типа, ♥️🤩😍🥰
@franknapolitano91443 жыл бұрын
How is it going up a steep off road incline or hill ? Does it do well in Mud ? Is it better than the Trailmaster MB200 2 ?
@lauxanlures99922 жыл бұрын
What the top speed
@slowmissouri205 Жыл бұрын
Out of the box under 30. There is a LOT you can do to double this.
@BizWiz2 жыл бұрын
Thank you so so much for making this video, From start to finish ,it was the only way to do it , I appreciate you , look forward to more purchases.
@BLUECHET3 жыл бұрын
Great video!
@Snailmailtrucker2 жыл бұрын
Does the Headlight hook right up to the Harbor Freight 212 Predator (non Hemi) engine or do I have to buy an electrical component for the Predator 212 ? I bought my kit from you in 2018. Thanks Liked/Subscribed !
@GoPowerSports2 жыл бұрын
Not able to do headlights with the Predator engines and not sure they make aftermarket flywheels and coils that'll work properly. You can either install an Electric Start Tillotson 212 Engine or use an external battery that you would have to charge up everynight.
@orlandothomas48134 ай бұрын
You if I want a custom bike built by you guys personally like the 212 megalodon package but except instead of 212 I want the stage 5 tillotson 225 on it with front brakes added to it please can you guys built me my ideal bike you guys can make good money I rather pay you then pay someone else to put it together I'm a fan and I own 6 mini bikes for me an my kids please build me my dream bike
@ernandemelo43 Жыл бұрын
Top top
@GoPowerSports Жыл бұрын
Heavy heavy low low
@JBBRAD92672 жыл бұрын
I would have a Tillotson but the blue color doesn't really match any bikes
@GoPowerSports2 жыл бұрын
That blue does stick out. We have black blower housings that'll replace the Tillotson blue
@xALFx13 Жыл бұрын
When you installed the header is there suppose to be air come out from between the gasket and pipe or in that area. Just bought the bike and i put everything on right at least that is what i think
@Buses2Bikes2 жыл бұрын
What's the rider weight limit on these things?
@GoCartMechYerf9 ай бұрын
Are there supposed to be intake bolts for the stage 1 kit? Because I have the orig intake bolts but they aren't long enough, but the kit also didn't come with any.
@jacobsebastien39102 жыл бұрын
Is the driven pulley 6 inch are 7 inches?
@GoPowerSports2 жыл бұрын
6”
@leehuntley189 Жыл бұрын
So this kit does not come with the tillotson 212 engine? On the website it says its included
@slowmissouri205 Жыл бұрын
I think different packages have it. Mine came with it.
@GoCartMechYerf9 ай бұрын
just got a mega moto, and when assembling the front forks, i had 2 spacers or the large nut in the center. Any advice for this?
@GoCartMechYerf9 ай бұрын
Um, I just wanted to let you guys know that when I opened the headlight bag and looked it over, there was a white wire hanging loose with out the metal piece on the inside in the whitish yellowish connector. Any advice for this?
@charlesyates66873 жыл бұрын
For the cables look under park tools for what is called a third hand .
@julestrdprodjimavicpro28696 ай бұрын
I'm getting 1 of these for a cruiser but for now I just love my Trailmaster Hurricane 200 stage 1 and I take it everywhere on and off roads👏🏽💪🏽🔥😇
@jesseshelby43832 жыл бұрын
I've had almost every mini bike frame and this bike rides the best
@jacobsebastien39102 жыл бұрын
I have a Custom Colman bt200x with a Tilitson 212 . thinking about getting this mega Moto 212 pro an put a Wildcat 223 on it.
@davitkandiashvili97973 жыл бұрын
what is the shipping waight of kit ???
@Offalotcr2 жыл бұрын
I’ve watched this video about four times and I’m currently waiting for the FedEx guy to drop off my kit!! I would really like to see a update for the electric start motor
@GoPowerSports2 жыл бұрын
You're in!
@farva911852 жыл бұрын
Are these frames about the size of the baja warriors? I've had my eye on this frame for a while now just haven't pulled the trigger yet
@GoPowerSports2 жыл бұрын
They are beefier than the warriors and sit a little more comfortable imo
@jeremiasgonzalez47023 жыл бұрын
👍
@GP_903 жыл бұрын
What is the full length of the bike when fully assembled?
@RickM195312 күн бұрын
Great instructional video. You need to one with the installation of the rear suspension and battery.
@GoPowerSports12 күн бұрын
Coming soon!
@xaviermccloud45863 жыл бұрын
Thanks for updating the video for this bike! I'll stop talking shit now lol. Edit: Whoever picks the music for the videos has fire taste.
@GoPowerSports2 жыл бұрын
Thanks for watching. That 1st video needed an upgrade, thanks for sticking around.
@bobirdieboberto27522 жыл бұрын
Good Work Watch Baby Step Records ARTIST BOBIRDIE Video Freedom Of Speech LEAVE A COMMENT Have A GREAT Day THANKS
@LauraLahrson Жыл бұрын
Can anyone tell me what type of fork oil is in the mega moto 212 and how much to use. I would like to change mine thx.
@mystery54852 жыл бұрын
dose the engine that comes with the kit still have the Grovner in it
@GoPowerSports2 жыл бұрын
Governor is still in the stock Tillotson Engine
@mystery54852 жыл бұрын
@@GoPowerSports ok thanks do you know the top speed of the bike
@slowmissouri205 Жыл бұрын
Rip that sucker out right away!
@marknardella53173 жыл бұрын
Hi, nice job, will the 420 with the electric start fit on this kit with the gas tank removed. Thanks Mark
@GoPowerSports2 жыл бұрын
Haven't seen it done yet. You may have to fabricate a new engine plate.
@robertrodriguez52772 жыл бұрын
What size is the Center Bolt for the 30 Series Torque Converter? My kit didn’t come with one!
@dannysamuels7124 Жыл бұрын
I'm at that point too! I need to knkw the same
@slowmissouri205 Жыл бұрын
5/16-24 thread and 1 1/2" long. Get grade 5 to 8. It is missing in all of the kits. I now have ten of them..
@РоманРоманов-ъ2з Жыл бұрын
Сколько стоит? Где купить?
@GoPowerSports Жыл бұрын
Si
@caleblopez59772 жыл бұрын
Will a Predator 224cc fit in this frame?
@GoPowerSports2 жыл бұрын
It should
@Imthatrandomkid5 ай бұрын
This video actually sucks ngl just watch another
@RonaldTree-ps2eq10 күн бұрын
Are there any that come fully assembled or at least 70%?
@joshhawn3988 Жыл бұрын
I had a problem with the rear fender, the gaps where too big and i couldn't get it bolted it. Is it normal for there be a 1/2 inch gap on each side? unless i got the wrong fender in my kit or the brackets weren't put in the right spot.
@slowmissouri205 Жыл бұрын
You can get it lined up with a long thin screwdriver. It will bend a little.
@Lilbunbun55911 күн бұрын
Dose it come with everything besides a motor?
@tylerwells8640 Жыл бұрын
Where can I find every part of that jackshaft assembly
@GoPowerSports Жыл бұрын
GoPowerSports.com or give us a ring at 866-846-5278 so that we can track them down for you.
@copperaudio9664 Жыл бұрын
Very well done instruction video. I hope you have some for sale this coming Xmas as I now know what I want.
@Thirsty_5.02 жыл бұрын
I have this bike..... I want to build the motor. What stage 3 kit will work for it?
@MilesManSk8Ай бұрын
What torque do you put on it?
@devinbattle51992 жыл бұрын
When y’all going to make videos about y’all racing parts and videos like these
@zacharyd9029 Жыл бұрын
Can you purchase this kit and run a 212 without the torque converter?
@GoPowerSports Жыл бұрын
It would need the torque converter due to the way the drive train is set up on the frame.
@WyFoster3 жыл бұрын
I own two of these, they are awesome!
@carstrucksntrattors30703 жыл бұрын
Did you ever get the light wired in
@WyFoster3 жыл бұрын
@@carstrucksntrattors3070 No, both of my engines don't have charging coils
@carstrucksntrattors30703 жыл бұрын
@@WyFoster ok thank you
@fatbuddycat3 жыл бұрын
@Mini Bike Morgan unmodified I take the mm212.
@stanlucas6652 жыл бұрын
I just watched this video again. I was wondering are you selling the over center Jack that you used to lift and hold this bike in place?
@GoPowerSports2 жыл бұрын
We have thought about selling them, but we currently do not. Thanks for letting us know you're interested though.
@stanlucas6652 жыл бұрын
@@GoPowerSports definitely makes it a lot easier to work on
@mitchmitchellp28682 жыл бұрын
Did I miss the break in period for the motor, the Predator motor I bought says engine must be broke in or void the warranty.
@kernelbadness3 жыл бұрын
Are there torque specs to follow or just ugga duggas?
@JBBRAD92672 жыл бұрын
Send it
@slowmissouri205 Жыл бұрын
You know the answer to this lol
@bbaaspencer13 жыл бұрын
Taylor also does an excellent job on his videos! ! I came here before I ordered this mini bike. Will definitely buy one, then follow along with this video while I am assembling it! 👍
@miguelpagansr6128 Жыл бұрын
The only bolt that I’m missing is the one for the crank for the driver, does anyone know what size it is? I have a Honda engine and I’m not sure what goes in it.
@slowmissouri205 Жыл бұрын
5/16-24 thread and 1 1/2" long. Get grade 5 to 8. It is missing in all of the kits. I now have ten of them..
@miguelpagansr6128 Жыл бұрын
@@slowmissouri205 thanks for the info, I was able to find one but it’s a little long. I’ll have to either trim it or just get the right one.
@joeherrick25303 жыл бұрын
whats the weight limit on this thing?
@GoPowerSports3 жыл бұрын
I've seen it pull a 250lb man before. I bet it'll do more.
@struggleranch94423 жыл бұрын
I’m 350 on exact same setup…I deleted the governor and added a half throttle plate (raised the stock fuel tank)…runs like a champ…now my boys can’t shake me!
@jesse-vd2lo3 ай бұрын
How do I purchase one of these?
@Bigmike3406E2 жыл бұрын
Where did you get that work stand ??????? I want one .
@Mike-nm9ru Жыл бұрын
I bought this kit but mine never came with a long enough bolt to go into the drive shaft after putting the torque converter on