Megaminx Last Layer (All Cases and Algorithms)

[@kevtheman7226]

For Personal Reference (Edges) One Edge Oriented: 2:36 2:36 Two Edges Oriented next to one another: 3:30 3:30 Two Edges oriented (one in front and one in back) 4:23 4:23 (Corners) One Corner Oriented: 5:06 5:06 Two Corners Oriented (one front and another right) 5:51 5:51 Two Corners Oriented (on in front one in back): 6:55 6:55

[@laylabrennan4349]

Kev The Man thank you!

[@g0-b0y90]

Doesn’t work. I have three edges oriented and no matter what I do doesn’t change it

[@jakethompson9770]

g0-b0y it’s because the guy has his L and L’ flipped. Switch them back when you write it down and it works.

[@tomwilliams4205]

Thanks man this helped alot

[@amaan9955]

Thanks bro

[@lnflixity]

ALL ALGORITHMS: Edge Orientation (3 cases): 0:24 | One Orientated Edge Setup: (F, R, U, R', U', F', y) 3 1:24 | Cluster of 3 Orientated Edges Setup: F, R, U, R', U', F' 1:56 | 3 Oriented Edges 'Arrow' Setup: (F, R, U, R', U', F') 2 Edge Permutation (3 cases): 2:34 | 1 Permutated Edge Setup: (R, U, R', U, R, U2', R') 2 3:30 | 2 Permutated Edges Aside Setup: R, U, R', U, R, U2', R' 4:23 | 2 Permutated Edges Apart Setup: (R, U, R', U, R, U2', R') 2, y', R, U, R', U, R, U2', R' Corner Permutation (3 cases): 5:12 | 1 Permutated Corner Stp [Side Grip]: (L', U, R, U', L, U, R, U') 2 5:53 | 2 Permutated Corners Aside Setup [Side Grip]: L', U, R, U', L, U, R' U' 6:56 | 2 Permutated Corners Apart Setup [Side Grip]: idk 7:54 | How to Orient the Corners

[@mugsyg237]

This is GREAT. I’m lazy, so this is faster and easier to watch his video. ALSO: if I put my megaminx away for a year or so, the algorithms help get back into the game. That’s why I love algorithms!

[@taufikhidayah8791]

*ORIENTING THE EDGES* 0:06 One Edge Piece 1:15 3 Edge Piece Cluster 1:54 3 Edge Piece "Arrow" *PERMUTING THE EDGES* 2:34 One Edge 3:28 Two Edges Aside 4:22 Two Edges Apart *PERMUTING THE CORNERS* 5:09 One Corner 5:51 Two Corners Aside 6:54 Two Corners Apart *ORIENTING THE CORNERS* 7:51

[@Learnjapanesefromsomeguy]

Like other competent 3x3x3 cubers, I was able to get to the last step by myself, but your video helped me finish this beast. Thanks! I actually just found the Megaminx in a nearby apartment building's 'trash pile' a few days ago. Undoubtedly the original owner got frustrated with it and just threw it out. I'm glad I was able to put her back together again...

[@AZhang-fb9xs]

TIMESTAMPS Orienting the edges (3 cases) 0:05 Case 1 (1 edge piece) 1:16 Case 2 (3 edge piece cluster) 1:56 Case 3 (3 edge piece arrow) Permuting the edges (3 cases) 2:34 Case 1 (1 edge) 3:30 Case 2 (2 edges aside) 4:23 Case 3 (2 edges apart) Permuting the corners (3 cases) 5:10 Case 1 (One corner) 5:52 Case 2 (Two corners aside) 6:54 Case 3 (Two corners apart) 7:54 Orienting the corners I'd been having trouble with the last layer and this video has been a huge help to me (solved my first Megaminx)! I thought I'd make it easier to navigate, both for my own sanity and for everyone else, especially as I try and improve my time.

[@thanoswillcome8567]

Thank u SO much, u just earned yourself a sub

[@aleksdimitrov7984]

in the permuting the corners step i have a case that isn't discussed. NONE of my corners are in the correct POSITION (not orientation). Why isn't this case discussed in the video? How do I solve it

[@CubingPlanet]

This is the Best Megaminx Tutorial for Last Layer

[@CubeSolveHero]

I appreciate the comment! I try to make my videos as clear as possible! A lot of my older stuff is pretty hard to follow, but I've been focusing on making higher quality content!

[@rogueshinobi117]

He kinda sucks at the end. 🤣🤣

[@CubeSolveHero]

👌🏼

[@6NEVEU9]

Yep.

[@brando3465]

I know, I got all of the layers without help but the last layer... :( This helped SO much.

[@personalaccount405]

Step 1) Orient Edges (assemble star) Case 1 - only one edge oriented correctly Face edge towards top left F, R, U, R’, U’, F’ Case 2 - three edges clustered together oriented correctly Face edges towards top left F, R, U, R’, U’, R, U, R’, U’, F’ Case 3 - three edges in an arrow formation oriented correctly Face arrow to the left F, R, U, R’, U’, F’ Step 2) Permutate all Edges Case 1 - only one edge is permutated correctly Face edge towards front R, U2, R’, U, R, U2, R’ Case 2 - two edges next to each other permutated Face one edge towards front and the other towards bottom left R, U, R’, U, R, U2’, R’ Case 3 - two edges apart permutated correctly Face one edge towards front and the other towards top right R, U2, R’, U, R, U2, R’ Step 3)Permutate all the Corners Case 1 - one corner is permutated correctly Face corner towards you L’, U, R, U’, L, U, R’, U’ Case 2 - two corners next to each other permutated correctly Face one corner towards you and the other towards the bottom right L’, U, R, U’, L, U, R’, U’ Case 3 - two corners apart from each other Face one corner towards you and the other towards the top right R(set up move) L’, U, R, U’, L, U, R’, U’, R’ (undo set up move) This might be hard to understand but it was more for me.

[@randomproductionscj587]

At least u tried copy pasting his description......

[@it053]

Thank you

[@aleksdimitrov7984]

in the permuting the corners step i have a case that isn't discussed. NONE of my corners are in the correct POSITION (not orientation). Why isn't this case discussed in the video? How do I solve it

[@ethan14924]

Ultimately,I got the proper video.Before I seen this,I thought the last layer is tough af.After seeing this,it's easy af.Thanks a lot!

[@et.lee8095]

This video really helped a lot but there were some cases that were not mentioned in this video. When I was permuting all the corners, what do I do if none of the corners are in the right places? Second, when is do the last step and solve the last layer, What if one of the corners is unsolved?

[@grahamberry6290]

Yo thank you sooooo much you helped me solve my first megaminx

[@CubeSolveHero]

Anytime 🌽 🐕

[@butteryShark]

Same

[@cubingbakery7909]

Same here

[@adrianadrian6081]

Your welcome

[@Averageguy1345]

Same

[@platinumlegoman1608]

This helps so much instead of the algorithms I’ve seen in the past easy for me to remember

[@weeklycuber3391]

Bro I struggled for sooooo long trying to do this now I can Thanks!

[@GlassyvoyageGlassyvoyage]

I have had to take my megaminx a part once and it was a pain to put back together

[@LukeShakalakaYT]

5:21. If you have no corners in the right place use this algorithm (sometimes more than once) U2 R U2’ L’ U2 R’ U2’ L

[@Nathaniel17369]

THANK YOU FOR PLACING TIMESTAMPS YOU ARE THE BEST!

[@CubeSolveHero]

Absolutely

[@dabzdavid2378]

4:18 It's really no mystery, just depends on the direction of rotation of the three dislocated edge pieces.

[@TheVCRTimeMachine]

Man...I tried about five different video and printed tutorials for the final layer and this was the only one that worked. Thanks!

[@corruptbunny]

Hands down *BEST* tutorial!

[@collinjohnson4581]

Yes

[@collinjohnson4581]

It is

[@adrianadrian6081]

Thank you

[@thecubingotaku8192]

0:55 a better alg for this case is just FURU’R’F’

[@NOVAZ_GAMING_HUB]

Thank God! I finally Solved it!!!!

[@reinrienrinerineinrienrien9692]

At 9:43, if the color of the last layer is on the front, you can do U R U’ R’ x2 instead of R U R’ U’ x4

[@kingwuf4420]

reinrienrinerineinrienrienr when I do that last part the rest of the cube gets messed up

[@mrbeastjr.2974]

What to do when no corners are matched pls share

[@CfopCubing]

1:38 After the U, you mean R'. Right?

[@DaniaAlButaihi]

This is possibly the BEST tutorial, I almost solved the megamix with a other tutorial, but the last layer was really hard, and this video helped we actually solve the last layer

[@HarryzBeys]

thanks! This really helped! Can you make a case for just no corners matching?

[@godofnutella2857]

Thank you so much man! You allowed me to solve my first megaminx! I can’t thank you enough!

[@ParkourMarkskilz]

If I don't have a corner on the last layer what do I do?

[@DonGamez13]

@@ParkourMarkskilz You still do the same thing he showed

[@ParkourMarkskilz]

@@DonGamez13 nah i know how to do jt now thx tho

[@alphatwist2191]

I have a really good algorithm Screwdriver

[@steinvee]

Braxton Lake 😂

[@charlieharrison]

I have a better algorithm U N' O R I' G I2 N A' L

[@kenmakozume1633]

Alpha Twist wow epik

[@roboknightt04]

Charlie Harrison hes the only one ive seen make that joke, so in reality you are the unoriginal one

[@chaosblitz7921]

@@roboknightt04 How the fuck does that make sense? Saying someone is unoriginal because they said someone else was "unoriginal."

[@Drdepression]

8:20 what about the 0 corner

[@KalodexD]

hey thanks! the last layer was really hard but your amazing explanation made it simple.

[@lyhnk]

I have a case thats like an H or Z perm on a 3x3 where I have to switch all the edges but the corners are solved. Any help?

[@childrepellent]

can someone help, ive gotten the star all in the right place and oriented but there isnt a case for no corners permuted... now im stuck what should i do??

[@hilderebeta5643]

Thanks cube solve hero your the hero of cubes!

[@shaunstraw1804]

You sir made that so clear. Like others getting to last layer is easy. Getting it solved is confusing. New sub thanks again

[@zerotwoone-sportsphotograp2948]

I keep running into my last layer having one corner cube that needs to be twisted while all the rest are solved. What am I doing wrong? Thanks.

[@CubeSolveHero]

Do you know if it’s ever been taken apart?

[@rollocubinggaming6378]

Try this video: kzbin.info/www/bejne/anqzo3yqntyLsMk

[@Qwaziop]

Best Rubik’s cube tutorial I’ve ever seen

[@kingvx5938]

I have no corners matching what should i DO?

[@mich00000]

Woo hoo! Thank you for making this video. I'm saving this. Your explanation is very clear and it's super helpful for me to tackle the last layer :D

[@unas11]

Going to be 100% Frank here usually your review videos are last I’ll watch as I don’t care for your videos. But my god you did this video perfect, usually people gloss over details you need to know for solves and then do algorithms to quickly. This was nice and slow so you can get your bearing and do it with you. I’ll be back for this and other solve videos.

[@manuelalejandrohernandezay8235]

First time I used this video and solved it. Then I locked the Megaminx as "the forbidden one" because I got obsessed with solving it. Now I re-open it and solved with this video again. Thank you so much 👍🙏

[@hello_tae777]

Thank you so much!! I've been working on my megaminx for WEEKS. This helped so much!!!

[@CubeSolveHero]

Glad it helped!

[@foodisgood.3644]

What about when there are no corners in the right spot?

[@dizy82]

Yeah I got this today. I was like wtf there is even more cases not presented here?

[@ambadasbudkhale3703]

Dude thank you alot from you i first time learnt how to solve a megaminx

[@MindfulPond]

Thank you so much! Learned it another way that was less detailed as to the certain possible conditions and kept runnin into problems on a couple algs that took forever to work out, this is much faster, sure I can shave the time down to about 8 minutes now ;) ✌

[@lama644]

So I have a case where none of the four corners is in the right place or the right orientation. They are all wrong! Help

[@yabbymanmosh9469]

I did U U R U’ U’ L’ U U R’ U U L and that put two into place for me

[@yabbymanmosh9469]

Like anywhere on cube with star up

[@lama644]

@@yabbymanmosh9469 Thank you! I had it on a shelf unsolved for a while now 😊

[@dizy82]

@@yabbymanmosh9469 That does not work.

[@keisha1309]

Thanks...i solved my megaminx 😄

[@naman6946]

thanx a lot u did a lot of help

[@mrpercyvr]

I don’t have any corners solved

[@selendis4117]

instructions are so clear and easy to do. thanks

[@Fonzy0011]

Love the video... What is the algorithm if after solving the edge pieces I have no corners in the correct spot ?

[@rachelwilson7626]

Why is it that every time I solve a Megaminx there's always a parity in which all sides are solved but one corner is twisted? I have to twist the corner at that point bc there isn't any video to fix it.

[@maxhenry7442]

Me too idk how to do it

[@euromaria]

When it happens to me i just redo the cube but im still confused why it happens

[@Devcat-zw2un]

There's a way to keep the megaminx oriented the same way in the very last step instead of having to flip the whole thing over again. If anyone needs help let me know. Or if you have solved a 3x3 before, it's the same thing.

[@W3RNL33]

2023Devcat can u plz teach me?

[@Devcat-zw2un]

@@W3RNL33 Have you solve a regular 3x3 before?

[@W3RNL33]

Yes

[@Devcat-zw2un]

@@W3RNL33 Okay, so in a 3x3 when you are on the very last step where your corners are oriented the wrong way, you do R' D' R D. And then once it is in the right spot, you turn to the next square and do the same thing to correctly orient it. You do that until all of the corners are facing correctly. You can use the same methid with the megaminx, but instead because there are more sides you will use R' RD' R RD until that corner is solved. Once that corner is solved do a U movement to rotate the next corner and repeat this algorithm.

[@Devcat-zw2un]

@@W3RNL33 Did this help? Sorry for typing such a long paragraph.

[@JesusMendoza-xl4oo]

You really are a cube solve hero 🦸‍♂️

[@didimajeed]

Thank you mate it was alot of help

[@sezoz0316]

Now everytime i have a problem with the algorithms on the last layer i just come here 😁 thanks a lot 😀

[@zfang16]

But what if none of my corners match

[@kylerhansen253]

Spin the bottom layer until a corner lines up, then do the algorithm. Then put the bottom layer back to where the edges match

[@nebras7778]

Dude, I just found the best last layer tutorial. Thank you so much. Uou explained all the steps well and made it easier for me to solve. Now all i have to do is memorize a bit of those algorithms and i can solve the megaminx anywhere.

[@smlix9365]

SAME!!!!!!!!!!!!!!!!

[@ITSRG777]

Tysm bro it helped me a lot tysm

[@biskt7102]

it helped me too

[@ebeisaac7700]

Simple and short, straight-forward and effective. Just got into megaminx and never would've thought I'd learn my first solve with your video. Great work, mate! What are your current solve times, BTW?

[@CubeSolveHero]

I’ve never timed my solves. I’m not super fast.

[@Qwaziop]

@@CubeSolveHerothanks for helping me I’m a beginner

[@stefan1833]

You are so positive! I love it

[@CubeSolveHero]

thank you my friend!

[@Cuboids-qj8st]

1:00 you should do F U R U' R' F'

[@Cuboids-qj8st]

and on 1:26

[@CubeSolveHero]

Cuboids 1001 that’s certainly more simplified! I’ve always done it the way shown. It’s hard to break old habits 😂. Thanks for the comment though!

[@Cuboids-qj8st]

yeah reverse sexy move instead of double sexy move

[@CubeSolveHero]

Cuboids 1001 #sexymoveforthewin

[@bornosanalysis5790]

I loved it....Your tutorial is much detailed....

[@CubeSolveHero]

Glad you enjoyed it!

[@bornosanalysis5790]

@@CubeSolveHero but some times I got no mstching corners in the last layer....

[@sillycats27]

This did not help me at all none of the algorithms for the corners work. I don't know if I'm doing something wrong but I do exactly what it says and it doesn't even get close to working 😑

[@geeta587]

My magaminx has 12 sides should I replace it or wahat

[@alangraton2000]

What move should I do when it's like this 6:47 ?

[@jamesestey9246]

I need help, what if you only have one non solved edge piece?

[@CubeSolveHero]

did you look in the description for algs?

[@jamesestey9246]

@@CubeSolveHero yeah, but I can never get it to one of those points

[@milenaiacovelli9342]

Same here

[@dizy82]

@@CubeSolveHero You're funny. Did you check your description? There is no algorithm for 0 corners in their spot.

[@KeenyNewton]

Thank you so much for the clear steps and solution. got stuck here long time.

[@ZaMa04]

Messed up my whole cube I spent 6 hours putting together

[@Oxzowachi]

lol

[@axmxb4300]

Takes 10 mins for me

[@pearl4121]

@@axmxb4300 ok person who can’t even spell rubiks right

[@dradenx5948]

Yo wth am I doing wrong at the last layer i either have 4 edges or 2 and idk what to do can someone please help me.

[@nidasuria]

It’s quite easy to do it

[@Darko767]

THANK YOU I FINALLY SOLVE A MEGANINX AFTER 2 YEARS!!!

[@calebhickey9344]

This is the best tutorial ever you should do all of the tutorials!!!!!!!!!!!!

[@CubeSolveHero]

I enjoy making tutorials! I need to start making tutorials like I make my unboxings and reviews! That would be pretty epic :)

[@gamingwithvignesh8249]

this is surely the best tutorial for the last layer, others go so fast we cant keep up. keep it up bro!!!!!!!!!!!!!!!!!

[@CubeSolveHero]

glad it helped!

[@iloveteepee3699]

oh my gosh thank you so much this helped me a lot

[@chasegessner7860]

Do you have an algorithm for when 3 edges are aligned correctly and 2 are not. Because I tried everything and nothing worked.

[@chasegessner7860]

@Brian LA yep, figured out that I most likely accidentally turned it, since my megaminx was so loose.

[@chasegessner7860]

@Brian LA yeah, it's all good now.

[@k_nzow]

I LOVE THIS VIDEO!!!! YOU MADE THE MAGAMINX BE SO EASY

[@kxmipikachu6762]

5:10 When you don’t have any correct corners- I’m clearly doing something wrong am I?

[@fruitflakz]

I have the same thing...

[@maskedmystery5456]

Same

[@kxmipikachu6762]

@@fruitflakz ikr...

[@kxmipikachu6762]

@@maskedmystery5456 Yh LOL 😂

[@zops6035]

L' U2 R U2' R' U2'

[@shwetagoel9401]

Omggggggg. Tysm!!!!!!! I was so stuck at the last layer😑😑😑 u helped me!! Thanks a lot

[@Ethan-lh6yg]

very helpful video, the best cube tutourial iv ever seen

[@CubeSolveHero]

glad it helped!

[@sarahmorrow1406]

Thank you very much You made it possible for me to solve my very 1st time of a megaminx

[@tedav4543]

I just found this clip a few days ago and I want to say that I appreciate your style of tutoring for this cube. I was wondering if you could make a tutorial for the 5X5 pyraminx. I've only seen a couple, but neither have given a method that would work on a consistent basis (I always end up feeling like I solved it by luck). Anyway, I appreciate your method of explaining.

[@ReviveJerryGfan]

Thanks bro. You really helped me because I thought myself how to get all the pieces in place until the last layer which I couldent figure it out so now I can complete the megaminx. Thanks!

[@ss-gy2ww]

Perfect video for learning last layer of megaminx Thanks Cube solve hero From your new subscriber

[@huypham2911]

I have 3 corners not solved, also they are not in correct sides 😅 what should I do? Thanks a lot

[@cornellkids]

Thank's I have solved it before and this time I couldn't figure it out!

[@rice3770]

Thank you I sloved my first megaminx

[@raulcarpintero3131]

Very good instructions but how will you go about solving the corners when you have no corners in the right place

[@iib3m5ii7]

Still last part when doing the algorithm correctly it messes up my cube someone help

[@mrbossmojang3025]

Same thing happened to me for like four hours and then I realized I had a twisted piece so check for that

[@kingwuf4420]

Yea it’s happening to me

[@rubencaus7809]

thx m8 u helped me so much i finally learnt how to solve a megamix

[@bobbymckeel1034]

So I have 3 megaminx’s fused together and I’m on orientation of the corners. I have two that are in the right place that just need to be flipped but I can’t do D moves 😭😭😭 I can only do front, right, left and upper

[@brandonbaggaley2317]

I have a case that where it looks like I need to swap two pieces on the final layer. And I can’t seem to get it.

[@rushoplayzz2365]

Thanks bro you made me solve it really easyly

[@ravikulkarni1450]

Hey Bro... That Really Helped Bro...❤️Love From India...

[@flynnflynnie2309]

Finally i got it thank you soooo much🎉🎉❤😊

[@shadowplays2944]

Thanks!It helped me a lot!

[@lani-sg5wy]

What do I do if, on the last layer, the edges are solved, but the corners do not match up anywhere?

[@aleksdimitrov7984]

in the permuting the corners step i have a case that isn't discussed. NONE of my corners are in the correct POSITION (not orientation). Why isn't this case discussed in the video? How do I solve it

[@kookookings8711]

I know this is 3 years old but this helped me soo much

[@greyandtracyyoung1658]

this help me so much I solved it and subscribed

[@piggynajfl6518]

I have a problem, my megaminx has no corners in the right place and even tho i did all the corner algorithms 5 times each they are still not in the right place what do i do now?

[@Chleb-rw7kf]

thanks i was able to get to the last layer alone with no help but i couldnt get further this video helped me

[@atomic43]

Hello. I am down to only one corner piece not matching and no matter what I do I cannot get it to work out. Any thoughts?

[@bhavalgrover2062]

I loved your video but I have a situation in which I have 3 corners of the last layer solved. Two are left. All 3 are connected