Mercedes-Benz 10.25" Android Screen Install (Full installation + review)

[@jayvarads]

Followed step by step on a 2016 mercedes GLC and worked perfectly. Even the Burmester system works without any modification required. Thanks for the great video

[@steeeeeven11]

Hello, I have a GLC300 2016 and was wondering if you experience any audio delay? for example, if you play a youtube video, are video and audio in sync? Thanks

[@aaz911]

@jayvarads, did you connect that usb converter box?

[@0210mlody]

That’s the best video what you can find explain how to change the original screen for android car play screen Thanks mate 😊

[@sid12345678910]

Fantastic tutorial with all the information anyone could ask for, Will be getting my screen next week. Cant wait to follow this guide!

[@luk3th3duk37]

How did u get on? I'm based in the UK (right hand drive) and I'm nervous 🤣

[@sid12345678910]

@@luk3th3duk37 yep i did it. Worls perfectly. Again amazing tutorial was very simple to follow.

[@Sebasupermotard]

@@sid12345678910 only thing that scared me is when he took the glovebox and the sidepanel of, didn’t see them do that in other tutorials 😅

[@wolfiestreet6899]

You've made this job 10x more complex than it needs to be....

[@TheFittingBay]

thank you

[@MrHukd]

Bell end

[@adamrayan105]

Hello pal,im getting no sound at all can u help me​@TheFittingBay

[@rahs1475]

Thank you for going through all the settings!

[@jonathangoh21]

Great video! Can’t wait to start on mine!

[@kyledellit3001]

Another great video Nathan

[@incartechie]

Great upgrade - we also install these over here in the UK!

[@MrTheZedan]

Any clue as to why when using the indicator it switches to the MB-Screen rather than staying on Car-Play? Quite annoying... especially when using Google-Maps...

[@incartechie]

Strange - never seen that before!@@MrTheZedan

[@manisatheesh8182]

Where r u guys based in uk. I want to do 12 inch screen which supports p360 cam as well

[@Misier90]

Nice and clear video!

[@TheFittingBay]

Glad you enjoyed it

[@oneillallen3342]

Great details

[@oneillallen3342]

Could do with some phone numbers please to my email address

[@Jamie-d3r]

Hello. Can someone help. I have a W205 c class couple 2016 premium plus with this system fitted but there is an Echo on calls ( the caller can here there voice ) has a burmister upgrade. Technician has moved the mic but with no success. Any help would be appreciated jamie from uk

[@alialsebahyalsebahy6131]

I have the same issue and really need help with it

[@guvnorlee]

@ The Fitting Bay ; Mate thank you for your comprehensive walk through. Although my model was the newer 12 inch screen, everything you covered was on point. Cheers

[@ywfotografie]

Do you have a screen bracket in the box ? Im missing it i guess.😢

[@guvnorlee]

@@ywfotografie sorry just saw this. Mine was complete... labeling of wires were a lil meh

[@matsaki7602]

I have tried this Android unit and I had to take it out again. The no. 1 reason is that the OEM microphone of the car is not used but a tiny small microphone on the right side of the unit. No way to use handsfree with this unit. Also, Carplay (Zlink app) keeps crashing or BT is not connecting. I have not found any Android unit that uses the car's OEM microphone and I will never put anything without it.

[@didar389]

I have same problems I can't connect carplay

[@LaurenceEvans-rq2bw]

Hi I've fitted the new head unit all working great except the factory reversing camera doesn't display unless in ntg mode, is this a simple setting issue. Thanks Loz

[@kham-daily]

U will have to use a Video Camera cable thats yellow from the OEM radio port (green in colour) to transfer camera video (CV- AND CA+) to the top Andriod Camera cable Yellow too and then u are good to go

[@richiero0o0]

Why they don't just piggyback the OEM microphone off the loom is a mystery - such a simple thing to do! (they do it on the BMW kit)

[@fernandodiazdeislaguantes909]

¿Como se puede usar el microfono original del coche?gracias​@@richiero0o0

[@JR-bf8gf]

Could you provide any information about how to code the car for AUX? All the dealerships i've asked say they can't do it.

[@aldidoku2570]

Did you ever find a solution for the coding ?

[@richiero0o0]

You can do it via the engineering menu on ntg 4.5 so probably can on ntg5. i.e. you don't need a garage to do it for you.

[@aldidoku2570]

@@richiero0o0 dont think thats possible for ntg 5 unfortunately

[@richiero0o0]

@@aldidoku2570 kzbin.info/www/bejne/kKGtdWion5aAiKsfeature=shared

[@richiero0o0]

@aldidoku2570 there's a few people selling dongles to activate it but honestly the sound is much worse than via Bluetooth.

[@izaninion5471]

Bluetooth sometimes connect to iPhone but struggles to connect. Zlink often does not connect automatically. What could be the issue? When turning vehicle off and on again Bluetooth won’t connect and Zlink won’t connect.

[@mrgster4889]

Same problem

[@patsitekick]

True Artist....! thnx..! 👊🏼

[@vittoriosilvestri1271]

Great video, thanks

[@Mush61E]

Thank you for a class video

[@nashidpeyvast3848]

You are amazing!!

[@junaidahsankhan]

Hi can I get help with Aux noise like whing, buzzing hginggg. When I attach aux to the car with andriod screen. ?

[@Djay_699]

This is great thank you 🙏

[@freshcryptojuice3790]

Hi can i ask u a question please. How can i change climate control temperature to celcius on the screen?

[@vernonward7094]

Run that by me again I’ve dropped a cup of tea over the back of the radio.

[@didar389]

What a great video thank u so much 😊

[@__Andy__]

For anyone having issues with the carplay not connecting sometimes just go to the tablet SETTINGS -> Wifi and connections -> hotspot -> Make sure it's active and on 2.4 ghz. sometimes it's not working in 5 ghz and that's why it does not connect.

[@pajinuk]

The hotspot in android unit working if you have inserted sim card not? If you want using hotspot from your phone you must just go to wifi , no hotspot. And carplay works via Bluetooth

[@__Andy__]

@@pajinuk i don t have a sim installed. i noticed the tablet creates a hotspot every time it connects successfully to carplay

[@pajinuk]

@@__Andy__ ohh that sound good , but mine dont work kike yours , unfortunately. 🤷‍♂️🤨

[@I_Love_My_Mercedes]

Does anyone have a Burmester system! because I have the Burmester system and don't want a significant downgrade in quality. This is very important to me. I really like your video explanation. I'm from Holland myself. And here they don't have this great explanation.👋👋👋👋👌

[@joea1746]

Nicely done. 👍

[@paradox9357]

Thanks for putting this together. One question. You mounted the GPS in the a-pillar? Doesn't the GPS need a clear view to the sky?

[@chrismeehan1977]

Hi, nice to hear an Aussie for a change here in the USA. How can i update the program on the my 2018 AMD C63s to accept the AUX feature to work, instead of using the USB way, as im sure ill lose sound quality.... what do you think??? Also this is the best install video for this product on KZbin well done mate

[@JimmyWoo-t8k]

-

[@michaligus3667]

Great video! I have similar Android screen. Everything works perfect, except phone calls. I can listen spotify with Android Auto, but when I answer a call I can't hear anybody, but everyone hear me. I don't have any idea where the problem is.

[@filipposSioupoulis]

hello there. iv seen alooot of products online like this one, but no1 speaks about the sound quality. hows compared to the stock ones? ( i think will be the same because its not another unit, you just install it on the one you already got from factory) is that true?

[@TheFittingBay]

Yes, sound quality is still the same, if not better. HOWEVER you need a unit like ours, with good audio OUT.

[@ClawzCrazy]

Hi how do I find someone in UK to do this. Thanks

[@scousejt]

Still need it doing?

[@karanveersingh2765]

I installed the screen and everytime i turn on turn signal it takes me to original screen from carpay

[@davidingram9042]

I had a problem with the dab it would not use the original dab radio...

[@staytrueau]

Hey bro. With the apps like you tube and Netflix I have no sound. Same with sometimes when playing music through car play. Seems that system doesn’t want to use volume only when on Bluetooth. Is there a system setting for this?

[@IanJohnson-i3j]

Great video I used it to installed a ugode 12.3 screen in to my 65 plate c250 and I don’t get any sound or radio function on ntg mode , really struggling . Any advice

[@nahimahad3854]

How do you code in aux? I’ve recently bought a car with an android screen but my phone doesn’t connect to the dongle thing you mentioned. It only works if I connect via Bluetooth/wired connection.

[@fernandodiazdeislaguantes909]

Can it be turned on and off from the button on the control panel or is it only turned on and off with the car's ignition key?

[@Fw._Phantom]

Would I be able to connect wires for a amp and subwoofer?

[@Ayyzaar]

Hi I’ve connected the GPS screen to my c class and I’ve mounted the GPS antenna in the place u recommended but have no GPS signal.

[@lowry7415]

Me too, do you know why?

[@prg29]

Thanks for the video. @the fitting bay ....question: does the FWD / BCK buttons on the steering wheel work to go to next or previous song in apple car play mode?

[@TheFittingBay]

Yes it does

[@prg29]

@@TheFittingBay thanks. I installed the system but couldnt get the fwd and back buttons to change songs on central consol. Volume dial works fine... Any ideas?

[@SosyalKale]

1314 şifresi bende olmuyor, şifremi nasıl öğrenebilriim acaba .

[@andrewkoury]

How was the sound quality? I have the Burmester system and don't want a significant downgrade in quality.

[@gotbucketsnation8416]

Hey Andrew, Did you figure this out? That’s the only thing holding me back from buying one. Please let me know

[@dphect]

If you have to use the AUX to USB box the audio quality is horrific. I’m going to be trying an FM modulator as a work around, this is a hardwire solution, not to be confused with the fm transmitter.

[@pajinuk]

If playing via oem car bluetooth that is same how before, but if your sound going through the android Bluetooth and usb aux converter is little bit worse.

[@jimhubacek3873]

Thanks for the install instructions. I just completed the installation and am having one problem. The reverse/backup camera feature doesn't work. When I put the car in reverse and the android screen is already booted up, absolutely nothing happens. I need to go to the NTG menu to see the back up camera and it works fine there. Any ideas?

[@SuperShowtimers]

Go setting, system, camera selection and change it to OEM CAMERA

[@jimhubacek3873]

@@SuperShowtimers the setting is already at oem camera so I’m not sure what the problem is or how to fix it. I do not have an aftermarket camera. I posted a video on my channel of the problem if you want to see it. Thanks..... I eventually figured out the problem. I had to make a change in the factory settings under CAN protocol from 5.0C to 5.0A.

[@brianservin5833]

@@jimhubacek3873 did you have to contact the screen manufacturer in order to solve that?

[@jimhubacek3873]

@@brianservin5833 I contacted Roadtop who sold me the system and they gave me the solution.

[@brianservin5833]

@@jimhubacek3873 oh ok cool I'm glad you solved that problem. I just bought my screen so I'm kinda preparing for all different scenarios to happen 😂

[@jdeyykm2365]

I have this screen in a car I bought installed by previous owner. How can I find out my factory pin like yours was 1314

[@chriswalker5582]

So did you run the extension from the usb in the arm rest to the one that says mic in the harness?

[@Ameen109]

How can i found the key factory to enter to factory settings to edit the size for the original system for the car

[@KWCapital-im4fc]

Further from above, how can I by pass the radio( “control unit head set”) the metal box tugged under the controls dash board.

[@shabzone]

Would like to know how it impacts sound quality on the burmester speakers when connected with usb. I never use bluetooth for playing music from my phone.

[@Lolobingow]

Hey does it sound well with bluetooth ? I have the burmester aswell

[@NatalieRocks-w5z]

Hi can you advise what you call the little box used for the Aux and USB connectors. Also where can I purchase this?

[@francoisvanschalkwyk6204]

This is a great product. Just bought a 2014 W205 and system is not upgradable and I must replace the whole system. Any suppliers/installers in South Africa?

[@denzellholder2768]

In 21:38 How did you remove the speedometer that’s on the right hand side of the display? “ it comes up in the NTG menu and when I go into reverse” really annoying and takes up half the screen

[@fajiralwan5097]

Brilliant Would you please tell me why I don't have sound on the screen

[@KWCapital-im4fc]

I have problem with my w205 Mercedes-Benz. Its screen appeared “ Boot Loader Active” and could not run the operation on the screen. Then I replaced it with the Android Screen “Snapdragon 450 NTG 5.0, 8 G ram and 256 rom” but it failed to work. The sound system doesn’t work out and the When I operate the reverse gear, the camera doesn’t show the rear view and my new android screen shows “ Boot Loader Active” What shall I do to fix this.

[@alialsebahyalsebahy6131]

Hi Guys, Can I install an additional Microphone ? The original microphone was perfect on the original screen but it’s has echo on the new android screen so I bought an additional microphone but I don’t know where can I connect it to make my sound better when I speak by phone on hands free otherwise I use my phone speaker instead if I call . any suggestions ? Ali from London

[@andreasbjstruphyer8084]

Perfect tutorial! Thanks a lot! My new screen is 12,3 inch, and has similar cable routings, but not identical to this. So i'm trying to install it based on this video, but not that easy.

[@shutinyanks]

Following this for a 2019 CLA - One question however, i'm thinking of installing ambient lighting kit with integration (hopefully) will the menus still pop up allowing me to set the colors?

[@kinhvo2216]

Hi fitting bay can you help me on how to install air vents lights specially on power cnnection . on my MB GLA 200 CDI 2015 thanks

[@TheFittingBay]

Yes we are in Melbourne, can you come down

[@italione1]

Mate where are you based I've had a screen fitted for less than a year and the brightness is so low I can barely see it.

[@ooarrlatvian]

Is it ok to plug the USB adapter into one of the coloured USBs connected to the new screen? Or do they have to use one of the ones in the console box?

[@simonlee3614]

The purpose of the USB adapter is to feed the music output from the android screen into the original amp and speakers, therefore it needs to be plugged into one of the two USB ports in the console, as they are inputs to the amp. Plugging into one of the coloured USBs would just connect the screen back into itself. These may be used for transferring data/music files to the screen, or an SD card plugged into it, from a USB device. When setting up, you can, for example, plug the USB adapter into one of the console ports and a USB thumb drive into the other and then select which input to use from the devices selection in the Media tab under the NTG menu option on the screen - allowing you to play sound from the screen, or from the USB device. (One thing that invariably catches me out, no matter how often I do it, is that you must use the original selection wheel or touch pad on the console when in the NTG menu, and not the touch screen. Touching the screen will take you back to the android menu).

[@razahassan7512]

Hello, I am from the UK and my Multimedia screen is showing black and white lines so none of the syetem which are controlled by screen are not working. but when i put it reverse gear it does show the back camera image for 3 to 4 seconds and then disappears and shows black and white lines. my car details are: C220 D bluetec, Reg 2015 in the UK. my question is if this screen got broke then how can i find the correct screen and can i change by myself by removing the plastic panel by using the plastic panel remover tool? thank you

[@miist3rp1974]

i'm nervous about removing the air bag cover. removing it is pretty safe (won't activate) and won't void any warranties?

[@gainsnutrition6708]

since a few days my phone isn’t connecting anymore with the Bluetooth so no music calls car play of any kind works now and don’t know how to fix it? at Bluetooth telephone it now says not activated i think there’s something wrong with that. also in the android settings it shows nothing at the Bluetooth setting really weird and it worked before so something must be not right?

[@SquidgyBananaXbox]

Did you get a fix for this?

[@alianwar2039]

Hey Nathan, you mentioned about coding the AUX. how can this be done as I would prefer that option as opposed to that add on box. I’m in California hence the question.

[@TheFittingBay]

Hey! Gotta find an activator :)

[@MrHukd]

​@@TheFittingBaycan you explain further please bud

[@hussblacksmith5417]

How is it after installing and driving, I bet all you can hear is rattles and a annoying cockpit whilst driving with the windows up

[@dcdc7788]

Does the DVD player work ? Looks like it was pulled out. Does Sirius XM work ? Does it allow the cameras to record like a dashcam ?

[@JR-bf8gf]

I'm not getting any signal from my NTG despite being sure to plug in the cable you said to plug in, in your video.

[@JR-bf8gf]

If anyone else has this issue, I contacted my retailer and they said to check under factory settings > car type > NTG 5.0

[@JR-bf8gf]

I fixed the issue, turns out I hadn't properly connected the quadlock. Stupid issue that I caused myself but worth checking if you have any issues. Now I have discovered a new issue, the sound quality is actually quite bad now. There seems to be almost no bass, as if the subwoofers are not even working. I've tried to look through all the settings but can't make it work. The sound is like this regardless of what input is selected, so I have a feeling it's something to do with the aux connection, like putting it into stereo has dropped the subs off?

[@MonsurRa]

My reverse camera and the volume doesn’t work... I changed to OEM camera but doesn’t work and Audio cable and box connected and connected to USB in car but nothing works any ideas? Maybe faults cables? But the stereo turns on.

[@nofear4890]

Did you ever fix this? I have the same problem

[@MonsurRa]

@@nofear4890 reset the system camera worked and enable the usb on the media interface of the Mercedes stereo it’s mainly the settings

[@nofear4890]

@@MonsurRa do you know how to get your OEM reversing camera to come up whenever you’re reversing your car automatically while you’re on zlink?

[@MonsurRa]

@@nofear4890 best thing to do is contact the manufacturer

[@ryanpurdue2364]

Ever had an issue where the command controller doesn't work. No power, volume or scroller.

[@armanjoharchi2333]

hello i bought a cla 45 amg with one of these already installed and i was wondering how i can get into the factory setting since i dont have a code. Is it written somewhere in box (the previous owner gave me the box for the screen and the og screen). Also i always have to connect to bluetooth in the mb app and then go to zlink in order to get audio. I dont get audio when i just connect to zlink. Please someone help because having to connect to bluetooth and then go to zlink for apple carplay is really annoying.

[@MrTheZedan]

Try 1314, that's the code for mine

[@paulhunt9775]

Hi I would like to upgrade to this system but cannot find anyone to install it . Where are you located and how much would you charge ? Thank you

[@simonharris7486]

Great video. I cannot find the pin code for factory settings. Also do I need a cable for Apple Car Play…really struggling

[@Vosstech7]

190627 is the code

[@benturner7679]

Wireless or wired works.

[@sidamini]

When i try to go to my factory menu it says no signal

[@sieben67]

Why does it sit so high compared to the OEM Screen?

[@Dre_98]

Howcome it doesn’t have wireless android auto like the others? And it doesn’t have the direction assist (or whatever it’s called lol) on the screen when in reverse, like the others. Is this android 11 or 12?

[@abdu1961]

Hi, can you help; My display is showing only RPM, but not showing vehicle speed. Thanks

[@TheFittingBay]

CANBUS settings. Contact your supplier

[@crocoman776]

Yes, it’s Canbus settings. Mine was the same. Changed Canbus and all fine. My reverse camera wasn’t coming on when using Apple Car play and this solved that issue too.

[@antonwill1656]

Hi there … great video. I have a 2015 c300, would set up work on my C300 in the USA ?

[@ChrisEmporium1]

Hi Flex, any idea how to get the wireless carplay to work? Looks like the screen is not searching for Bluetooth devices

[@jamaicansbuildingdreamhous1136]

What’s the name of the unit and can it fit 2016 c300

[@TheFittingBay]

Yes it can, on our shop www.shoptfb.com

[@masicher1703]

Great video, I have w205 c250, my kit came with a speaker and a microphone is it option connection?

[@Vosstech7]

i have a question, how can we code the car with the aux like you did? instead of plugging it into the usb port inside the storage compartment, it wasnt too clear in the video. Other than that, amazing tutorial

[@TheFittingBay]

Need to be done with computer or dongle

[@Vosstech7]

The Fitting Bay anyway you can provide a tutorial?

[@JR-bf8gf]

@@TheFittingBay Do you know where to get the dongle or the software to code it? Or is there something we can say to a dealership so they understand what to do? All the dealerships i've asked say they either don't know how or can't do it.

[@dphect]

If you had the basic audio 20 system in your merc, you can’t code aux input. It’s like that for the UK at least.

[@gordito22]

Hello mates, I got a CLA (C117) with NTG 5 and I installed an android screen like that. All works fine but when Im using ¨the android part¨ it doesnt switch in automatic to the rear camera. The camera works perfect but I have to put the NTG mode by manual. Someboy can help me? Thanks a lot.

[@pajinuk]

Hi, my car is w205 2020 comand online i think is NTG5.5 will work this screen also? Thank you

[@arthurnam1183]

You shouldn't install this screen, it is usually installed on cars before 2019 with ntg5

[@pajinuk]

@ so I definitely need screen which is NTG5.5? 2019+ thank you?

[@akangkuya]

Hi... i have a problem, why the original NTG menu didn't show up in the screen..?? the LVDS cable already connected, change screen setting, still blank screen.... 😭

[@12voor14]

Did you manage to fix this?

[@devjhugaroo6225]

My car mercedes benz b180 w246 no female aux..how do I get sound please...other than using Fm transmetr.thnk u

[@chrizarusdawiz247]

Can I play songs on phone on Bluetooth connection with this screen?

[@JohnHarland-i7n]

How much do you charge for installation regards john

[@romulusandrei]

hello, There is a need to disconnect the battery?

[@wilbur131094]

With the phone link app and car play, does the command knob work with it? So I can control car play with the knob and not use the touch screen?

[@PierCarloDallAglio]

Yes, works fine for me

[@우승현-d5t]

It didn't come out. How should I have decided

[@domenzajc2603]

Where can i find setting for bt call to play on speakers of car and not on small speaker of this screen?

[@P.Petrov550]

Hello! Why does the Android Screen drainin my battery when the car is completely turned off?

[@didar389]

Can u watch KZbin and Google maps at the same times

[@mrlucky4441]

Why would u wanna do that? Dangling your life mate

[@junaidahsankhan]

Hi urgent help plz. I am having aux noise issue. Continues noise of whinggg buzzing seeeeing. When I connect andriod aux to my car. Any tips plz?

[@dphect]

I’ve installed mine, all works brilliantly apart from when I make/receive a phone call - I get no call audio at all. Do I need to install the speaker and mic that came with the screen or is there a setting to use my OEM mic/speakers instead?

[@andymuller8883]

Any luck with this please, I’m having the same issue. Is driving me mad!

[@dphect]

You have to install the mic and speaker. This guy doesn’t mention that.

[@MrTheZedan]

mine works if you go to Audio on the MB-Screen and select AUX

[@omarosman6471]

I am getting a stop vehicle shift to P error since install

[@ahmetsevik]

what about split screen?

[@liammcgrath6184]

Does the mercedes Tv still work through the screen ?

[@ilianag8071]

WOULD ANYONE SUGGEST this size or the 12"

[@karlmartyn9316]

Hi hope you can help, I’m doing the audio out and my car won’t be coded out. So I have used the cable which connect to my USB port then the other end into the female port, but still no sound from my screen. Any ideas ? Thank you

[@PierCarloDallAglio]

Same problem for me :/