Mercedes Benz 7G Electrics (conductor) Plate Replacing - Part 2 of 7G ECU Electrics Plate

[@kenxiong6830]

Thanks for providing the torque specs. Most videos left this important information out

[@AutolandScientechUSACedarPark]

Glad it was helpful!

[@HuuNguyen-jj6rp]

very clear instruction

[@AutolandScientechUSACedarPark]

Thank you!!!

[@alexanderstefanxandraswedi5835]

Good job sharing

[@AutolandScientechUSACedarPark]

Thank you!!

[@jzabehlrodriguez3991]

how much is Newton meters in Inch pounds? great video by the way

[@AlvaroHernandez-uv2eb]

How do you convert Newton meters to inch pounds?

[@AutolandScientechUSACedarPark]

You can enter the Nm value on google and convert to ft-lbs.

[@AutolandScientechUSACedarPark]

You can enter the Nm value on google and convert to ft-lbs.

[@junaidawan2879]

i like you video

[@AutolandScientechUSACedarPark]

Thank you!

[@junaidawan2879]

good information

[@AutolandScientechUSACedarPark]

Thank you!

[@richmcadams1418]

Can I take the plate out of the broken trans & put it in the new,used trans & it will work ?

[@AutolandScientechUSACedarPark]

No, needs programming.

[@roothegreatest5476]

Hi Thanks for your video Would mind if you let me know how solenoids are numbered? I want to change the solenoid number 3 Thanks

[@AutolandScientechUSACedarPark]

What is the year and model are you working on? I can see if I have that info.

[@roothegreatest5476]

@@AutolandScientechUSACedarPark thanks for your replying 2014 A class 1.8

[@user-ic5hg4tb9u]

Do you know which one those solenoids is the "D"Circuit. I have a p2759. hard shift occasionally.

[@AutolandScientechUSACedarPark]

You can use a wiring diagram for your vehicle to identify the solenoid in question.

[@realworld822]

If this fails, would I have a check engine light or any light in the dash?

[@AutolandScientechUSACedarPark]

Yes.

[@tomtymons5758]

Did you use new fasteners on the ECU or the pan?

[@AutolandScientechUSACedarPark]

Yes.

[@ulflei]

How to do you marry it to the transmission (coding)

[@ericedberg2104]

Please see the video for step 3 - coding/programming with iSCAN - kzbin.info/www/bejne/rojFi2NmpaaLjpY

[@AutolandScientechUSACedarPark]

See the video for step 3 - coding/programming with iSCAN - kzbin.info/www/bejne/rojFi2NmpaaLjpY

[@AutolandScientechUSACedarPark]

Thank you, Eric.

[@AutolandScientechUSACedarPark]

Thanks for the info.

[@EsshaDiallo-mx8lp]

How do you program this valve bory

[@AutolandScientechUSACedarPark]

See part 3 of this video.

[@Davideo10]

I am an apprentice mechanic in all auto Mercedes Benz I need more more learning and the solution to the problems I may come across the conductor plate

[@AutolandScientechUSACedarPark]

Keep an eye on our youtube channel for more Mercedes-Benz content!

[@BROREACHOfficial]

Great mechatronics

[@AutolandScientechUSACedarPark]

Yes!

[@d-rockpain4250]

what keeps oil from coming in the conductor plate side of the plug? I seem to have oil in my plug, but new rings do nothing. Seems it would need a seal on the back of the plug on the conductor plate side. Has anyone seen similar? Plz help 😢

[@AutolandScientechUSACedarPark]

That is an internal leak in the part. You can't seal it with an O-ring, needs a new plate.

[@AlvaroHernandez-uv2eb]

How much is 8n nution meters in ft/pounds?

[@AutolandScientechUSACedarPark]

5.9 ft-lbs

[@AlvaroHernandez-uv2eb]

@@AutolandScientechUSACedarPark thanks 🙏🏼

[@willcalderon1990]

U don’t show how to connect the plug

[@AutolandScientechUSACedarPark]

We do in the following parts of the video, where programming takes place. This is due to the old pate being plugged in to pull the data from, before plugging in the replacement one.

[@markbrown4475]

Always used ur hand to catch any bolt never a gun simple so I see few mistakes

[@AutolandScientechUSACedarPark]

Thanks you for watching!