very professional, your videos are extremely helpful and informative i just wanted to show you a little support and hope everyone else does the same because you honestly deserve every dollar and i’d really like to see this channel thriving and lasting a long while, thanks for helping us for getting more experience in all mechanic works.
@adventuresofhachem Жыл бұрын
Thank you so much 🤗
@fiily17 ай бұрын
Guys knows his stuff, fast simple, and to the point, no talking for 20 minutes, time is money.
@adventuresofhachem5 ай бұрын
Thanks for watching and thanks for the nice comment.
@davishahn31012 жыл бұрын
I have to say, you know how to help yourself even if you dont have the correct tools for the job! I found this video because my 2004 C180 Kompressor needs a new timing chain. Keep up the good work man!
@adventuresofhachem2 жыл бұрын
Great to hear!, Thank you Very Much For Your Super Nice Comment Mr. Davis
@IAM-iv1oz2 жыл бұрын
Excellent Channel! Love the first person view that you do with no talking. Love it man!
@adventuresofhachem2 жыл бұрын
Glad you enjoy it!, Thanks For Watching , And Have a Nice Day.
@jasontarantino5591 Жыл бұрын
I rarely watch these videos from start to finish but this was brilliant. You have a new subscriber and I look forward to watching future videos. The compression test at the end was great. I actually paused the video to read some comments and i noticed you mentioned it. Thanks bro.
@adventuresofhachem5 ай бұрын
Thanks for watching and thanks for the nice comment.
@albertliberty-ou7sg Жыл бұрын
I really love ❤️ this great work,,, I am also a mechanic from Nigeria 🇳🇬,, I really have a lot to learn from this brother
@adventuresofhachem Жыл бұрын
Thanks and welcome
@antonioglcarvalho411711 ай бұрын
VERY PROFESSIONAL CONGRATULATIONS WELL DONE AND NO MISTAKES VERY IMPRESSIVE.
@adventuresofhachem8 ай бұрын
Thanks for watching and thanks for your nice comment 👍❤️
@dayoa3947 Жыл бұрын
Very clear very professional and good step by step.
@adventuresofhachem Жыл бұрын
Glad you liked it. thanks for watching.
@FgtTunning2 жыл бұрын
one of the most satisfying videos out there ur work is very swift and clean. thank u
@adventuresofhachem2 жыл бұрын
Glad you enjoy it! , Thanks for your Nice Comment.
@paciencia09562 жыл бұрын
Youre a great mechanic, im glad I discovered your channel.
@adventuresofhachem2 жыл бұрын
Thank you very much! for your Nice Comment.
@gabriellara210011 ай бұрын
HI, awesome video sir, question......what is that red plug you are using to test compression? is it homemade? Id like to make one myself if it is... Thanks again for a great video
@adventuresofhachem8 ай бұрын
It was a plastic cup that comes with the new water pump. I do use it with the safety glasses on, to do the engine compression test, my way.
@duraiddlimi90322 жыл бұрын
Thank you for the video very very clear, but I have one question about the second rail of the chain, is it difficult to replace it and how?
@adventuresofhachem2 жыл бұрын
to replace the timing chain guide that on the right side of the engine , need to take off the engine chain cover, but this guide does not get damaged easy as the other guides, it is very strong. if it is damaged it should be replaced by taking off the chain caver and replace it with new chain guide. have a nice day.
@Islam-p1W Жыл бұрын
you made it look so easy the speed man wow you are natural
@adventuresofhachem5 ай бұрын
Thanks for watching and thanks for the nice comment.
@OneManOnFire2 жыл бұрын
Maybe you could provide some insight for me. I'm replacing the chain also on my m271. My timing marks on my cams do not line up and I've seen the chain jump when turning the crank by hand. I have 2 special MB tools that locks the cams in place and chain crimping tool. The goal is to replace the chain and tensioner. How can I get my cams lined up correctly if the chain has visible jumped already? I'm a little bit pissed TDC. Could I remove the tensioner and create slack on the chain and turn everything counterclockwise or clockwise so I can line everything up?
@adventuresofhachem2 жыл бұрын
Hello ,Try to read this Video comments and you will Find the answer for your question, someone asked me the same question and i did answer with big Good Comment. if you have an other question for this timing chain setup that i am doing in this video, you can ask me the question , You are Welcome. have a Nice Day.
@OneManOnFire2 жыл бұрын
@@adventuresofhachem Thank you so much
@adventuresofhachem2 жыл бұрын
You are Welcome.
@ehabyaani9092 Жыл бұрын
مشاء الله عليك والله انو شغلك دقيق اوي ومفيش اي غلطه فيه ياريتك في دبي هنا كنت جيتلك عندي سوال ممكن بخصوص الكام شافت والكرنك شافت في مكينه m272
@adventuresofhachem Жыл бұрын
الله كريم شكرا على المشاهدة. رمضان كريم
@KhalKhtri Жыл бұрын
Thank you for video, could you possibly do tutorial on stem seal replacement for m271 engine? Thank you.
@adventuresofhachem Жыл бұрын
Thanks for watching, I will make a Nice video for valves seals replacement to watch on my channel soon, inshaa Allah.
@KhalKhtri Жыл бұрын
@@adventuresofhachem Thank you much appreciate your videos and wisdom.
@MyTownKbl2 жыл бұрын
Hi master. Very well❤❤❤👏👏👏I loved your work so much. I am from Afghanistan I am also mechanic now I working in Turkey
@adventuresofhachem2 жыл бұрын
Thank You For Your Nice Comment Mr. Mustafa.
@abdulwaaghiedadams62052 жыл бұрын
I love the way you work everything is on place very neat very presice even the vihecle is covered you show thumb up i give you thumbs up PS does this work on a c180 kompressor as well is it the same routine
@adventuresofhachem2 жыл бұрын
Thank you Very Much for your Nice Comment, C200 and C180 the old once they have the same timing chain setup, i like these cars they are very Good.
@gladiatoralmousa56894 ай бұрын
Great veido, I have a quistion Im Working with my car now with same engine ro set it with DTC on the mark of crank pully OT then i check the cylinder 1 its not rop center way much down ? How come like That, ?
@adventuresofhachem4 ай бұрын
Crankshaft pulley, there's rubber inside it , if damaged it will turn different way. Harmonic balancer need to be replaced maybe.
@pvdk12622 жыл бұрын
How is it possible that you can turn the crankshaft for getting the new chain in without touching the valves? Camshafts arent turning and some valves must be open
@adventuresofhachem2 жыл бұрын
Hi, For this Engine only , When the Timing Tool is Sitting on the cams and locked the Cams in the timing setup Position, i do turn the crankshaft to pull out the old chain and install the new chain with very careful and i never had valves touched the pistons, i do this way just for these engines type Mercedes W203, W212 , for other engines Pistons & Valves they way touch each other. Thanks for Watching. Have a Nice Day.
@kemroncowan19122 жыл бұрын
yes bro rate this video 100%
@adventuresofhachem2 жыл бұрын
Mr. Kemron , i am Glad that you enjoyed watching My Video
@SnipingWithSkillz Жыл бұрын
The valves on cylinder 2,3,4 dont hit when you turn engine?
@adventuresofhachem Жыл бұрын
i never had the valves hit the pistons when turning the engine !! with the timing tool is set on the cams !!! just for this Engines W203 & W212 other engines pistons & Valves May Hit each other. have a nice day.
@technomanfpv26952 жыл бұрын
Salut je suis francais super vidéo merci , tu a fait ce changement pour un défaut alumage ? ,Hi, I'm French, great video, thank you, did you make this change for an ignition fault?
@adventuresofhachem2 жыл бұрын
Salut, je changeais la chaîne de distribution avec les engrenages, car la chaîne était étirée et les engrenages étaient endommagés et ils faisaient beaucoup de bruit. merci d'avoir regardé et bonne journée Hi, i was changing the timing chain with the gears, because the chain was stretched and the gears where damaged and they where making big noise. thanks For Watching and have a nice Day.
@rockyfanatics5828Ай бұрын
Hi there, I'd like to ask, I see my chain runs beneath the chain sliding pad... Is that normal? When I put in the new chain, should I put it on top or?
@GearheadologyGarage7 ай бұрын
The compression tester is dope 👍🏽💯😂
@adventuresofhachem7 ай бұрын
Thanks for watching 👍 🙂
@BearFish112 Жыл бұрын
Thanks for the video. How can you turn the crankshaft without removing the camshaft? The pistons were supposed to hit the valves, right? What was the metal bracket you installed on top of the camshafts?
@adventuresofhachem Жыл бұрын
Thanks for watching, for this engine W203 and the engine W212 only!!! , I put the engine timing Tool on the cams and then , I do turn the engine slowly with very careful 😀 and the Pistons will not touch the valves. I did this way for more then 70 engine timing chain setup and no Pistons touched any valve, this is only for W203 and W212 Engines , other engines will touch for sure!!!! .
@ronblake1002 жыл бұрын
Great ,best on KZbin, I have a question about to change gears and chain, what step do I take if my chain has slipped and the timing mark on right gear not lining up.
@adventuresofhachem2 жыл бұрын
Hello Mr. Ron, First You Need To make sure that there is no valves damaged, you need to remove the aluminum plate that holding the cans in place, so all valves will close and after that you need to wear Safety glasses and hold up the engine chain by metal circle bar and then turn the engine by hand with very careful while blocking the spark plug housing by a plastic cup and turn the engine slowly, if the cup fly that mean the valves are good on the cylinder you testing for safety the cup should be Secured by Secure wire to the engine and make sure that you Wearing safety glasses. you can watch my video on my channel to see how i do this test for the engine Valves. Have a Nice Day.
@ronblake1002 жыл бұрын
@@adventuresofhachem Thank you for your reply, I have tested and cup flys off on each cylinder ok ., but not sure how to set the alignment of right-hand timing gear to top mark, do I turn it? the old gear the teeth were worn and the chain must have slipped and put out the timing.
@adventuresofhachem2 жыл бұрын
First the Gears and chain with the guides must be changed, to turn the exhaust cam, put the old gear on the cam, with the crankshaft at O/T cylinder one is up, start to turn the cam using Big screwdriver on the teeth of the gear with the screwdriver on the side of the cylinder head, turn until you can put the timing tool on the cams, remember you have to be very careful, safety first always remember that. if you feel the valves touching the piston turn the crankshaft a little bit. have a nice day.
@ronblake1002 жыл бұрын
@@adventuresofhachem Thank you for this info, I have just been able to get back working my merc, C180K, I have noticed that the timing mark on the crankshaft is way out of top dead centre on cylinder one, could the fly wheel slip with the timing marks ? cylinder one is top dead centre on the compression stroke and timing 0| is almost at 6 o'clock.
@adventuresofhachem2 жыл бұрын
Sometimes the engine harmonic balancer is out of right timing because it has rubber between the Pulley and the balancer, if piston 1 is up the O/T is at 5 or 10 or more that mean harmonic balancer is faulty and need to be changed to get the right timing marks for the engine.
@mantastvar97097 ай бұрын
would this be the same procedure for 2008 w211 e200 Kompressor?
@adventuresofhachem7 ай бұрын
not sure. 🤔
@FSandberg2 жыл бұрын
Great job man, plesure to see you work!
@adventuresofhachem2 жыл бұрын
Much appreciated!, You are Very welcome to Watch my Mechanic Videos on My channel. Have a Nice Day.
@Adnan_160411 ай бұрын
Which Screw are you using für the slide rail of the chain
@adventuresofhachem7 ай бұрын
Watch the video again. 🤔
@WurminatorZA2 жыл бұрын
What do you do when the cam timing is off before removing chain and gears? How do you align timing again?
@adventuresofhachem2 жыл бұрын
hi, if the engine timing chain was off , what i do is, i do not set the timing with the old chain again because it is stretched and will jump, first thing i do i remove the two camshaft to let all the valves close and then i do my easy way to test the engine compression to see if there is damaged valves, 90% the valve will not be damaged in this nice engine, if all valves are not damaged i do fit new timing chain kit if there is damage the cylinder head should be removed and repaired, you car watch my video how to do easy compression test without tools that is my way to test, remember safety first. good night .
@WurminatorZA2 жыл бұрын
@@adventuresofhachem Thank you for explaining, much appreciated.
@andileluvuno49882 ай бұрын
Best tutoring unprecedented
@adventuresofhachemАй бұрын
Thanks for watching
@berndschleicher59072 жыл бұрын
Great work and great video. Specially the compression test. 😅 Thx a lot.
@adventuresofhachem2 жыл бұрын
Glad you liked it!
@arthurifeanyi39522 жыл бұрын
I love your style of work good work
@adventuresofhachem2 жыл бұрын
Thank you so much 😀 For Your Super Nice and Good Comment. Have a Nice Day. Mr. Arthur .
@ahmedslama32862 жыл бұрын
nice work . Is there any harm in moving the engine in the opposite direction?
@adventuresofhachem2 жыл бұрын
Hello Mr. Ahmad, When working to Setup the engine timing it is OK to turn the Engine in the opposite direction but should ! Stop ! when feeling the pistons are touching the valves !! but after the engine timing is set correctly, it will be a very very very bad idea to turn the engine in the opposite direction, because 90% the chain will jump and the engine timing will be wrong and can damage the valves very easily. Thank you Very Much Mr. Ahmad for your Nice comment. have a Nice Day.
@ahmedslama32862 жыл бұрын
@@adventuresofhachem many thanks for reply . I was in problem between engine sealer and the mechanic . The engine valves is distroied . Thank you a lot
@Caz8852 жыл бұрын
@@adventuresofhachem how the pistons didnt hit valves when you turned from the crank when installing new chain? because camshaft and valves were still.
@adventuresofhachem2 жыл бұрын
Hello Mr. Caz , this is why i like this engine, when setting up the timing chain for this engine and lock the timing chain with the timing tool on the cams, i noticed that the valves will not touch the pistons, just for this engine !!!! but Sometime the valves will touch the pistons, to make sure its not touching, must feel when turning the engine to put the new Timing chain, if i feel that the pistons are touching the valves, i Stop turning the crankshaft to don't make damage for the Valves, i did more then 50 times job like this and never pistons touched the valves when !!! the timing tool set on the cams !!! but different engines, Maybe 80% or more pistons will touch the valves when turning the engine like this. for this engine if the engine running and the timing chain get damaged, 90% valves will not get damaged, if the engine stop after chain Get Damaged and no one did try to start the engine after the chain damaged. that why i like this engine, it has good space between the pistons and the Valves just when the timing tool is fitted on the cams, otherwise the pistons and the valves will hit each other.. Thanks For watching, and Have a Nice day. Mr. Caz.
@gabrielmariuspricop45452 жыл бұрын
I love You Man! ...Best video ever !Greetings from Romania,♥️♥️♥️🙋
@adventuresofhachem2 жыл бұрын
Glad you enjoyed The Video, Thank you Very Much For You Nice Comment, Mr. Gabriel. Subscribe to my Channel to watch more videos like this. Thanks.
@tahirnawaz7590 Жыл бұрын
I really love your style and job how you done this ❤❤❤❤❤❤❤❤❤❤❤❤❤
@jusepw202_62 жыл бұрын
What do you do to not hit the valves while moving the crankshaft?
@adventuresofhachem2 жыл бұрын
70% of times, i do turn the engine & the valves does not touch the pistons in this engine model , but to prevent valve from touching the pistons , i do take of the camshafts holder that on the top of the camshafts with the camshafts. and in that time i can do easy engine compression test for the valves to make sure that they are not damaged, watch the video that i made. have a nice day. remember safety first .
@lodhiautos97612 жыл бұрын
Thanks for your video. Is the same procedure for w202 c200 year 1999?
@adventuresofhachem2 жыл бұрын
Hi, Thanks for your comment. W202 is a different Engine and different timing chain.
@lodhiautos97612 жыл бұрын
Thanks bro.
@adventuresofhachem2 жыл бұрын
you are welcome Mr. Lodhi. if you did not subscribe to my channel yet , Subscribe if you would like, Thanks.
@timcanizares5240 Жыл бұрын
I have a m271 that jumped timing mercedes tech said it had bent valves.... but he did not line up the marks on the cams correctly or use the tool you used to hold the cams.... you think it has bent valves even though the chain is not broken
@adventuresofhachem Жыл бұрын
Thanks For Watching. when i do job like this, i like to set the timing tool on the cams and let the chain turn free on the top of the gears, my way to check and to know if there any damaged valves , i can know for super sure if the valve bents or not , watch my videos on my channel and see how i do this engine compression test. Have a nice Day. 85% of the times, those engines can Survive from bent valves. best Engines.
@timcanizares5240 Жыл бұрын
@@adventuresofhachem OK thank you very much
@danjelgjatari83842 жыл бұрын
This two wheels are broken on my car while driving other day in morning car wouldn't start driving, what I wanted to ask if the valves are also bent or just this🤔, thank you
@adventuresofhachem2 жыл бұрын
Hi, if you wanna make sure that the Valves are bent or not, there is an easy way that i do, to do this test, i like to tell you that 90% of this problem with the timing chain got no bent valves, watch this video again, !! just now i put at the end screen of this video, a video about how i do test for the valves to know if bent or not, go to the end screen, top right video and watch it , if you need to ask question again you are welcome. have a nice day , Remember Safety First. Subscribe to my Channel if you did not yet, to watch more videos like this. Thanks.
@lesalonduletsplay36272 жыл бұрын
Hi great work ! I have a question, what is the brand of the purchase kit please ? Thank you
@adventuresofhachem2 жыл бұрын
Hi, thank you for your Nice Comment, the customer did bring the engine timing kit with the gears, i just did install them for this engine ,they were after market car spare parts put they work just fine, put always the original are the best 👌, SUBSCRIBE to my channel to watch more videos like this ❤️. Thanks
@paulnilsson47242 жыл бұрын
Great work and very good video. Is the change of timing chain exactly same on the E200 W211 m271 engine ?
@adventuresofhachem2 жыл бұрын
if the engine for W212 or W204 like E250 or ... Turbo it is same but the chain gear and the engine parts and the tool to do the job some of them are different, engine has more parts. it is same & Different. soon i get job for this engine i will make a video from start to finish for the engine timing chain, & will be Very Clear, Enshaa Allah
@gfcarpecaseservicos157 Жыл бұрын
Boa Noite, toppp de mais seu video amigo, me ajudou muito, mecanica de uma forma simples mas muito pratica e confiavel, Uma duvida? Esse motor nao atropela valvulas quando gira so o virabrequim com o comando travado na hora da troca da corrente? Parabéns pelo Video, Abraços
@adventuresofhachem5 ай бұрын
Thanks for watching and thanks for the nice comment.
@jjtop202 жыл бұрын
Hi nice work! When do I need to replace the timing chain and cam gears?
@adventuresofhachem2 жыл бұрын
Hi, Thanks For Your Comment, i like to change the chain Kit every 80,000 Km & the Camshafts Gears Every 120,000 Km. Have a Nice Day.
@ahmedeissa15682 жыл бұрын
Wow that is wonderful thanks for you work and thank you my engineering 💪👍
@adventuresofhachem2 жыл бұрын
Thanks for watching Mr. Ahmad
@TheBigstrat2 жыл бұрын
This is the best Video on Timing Chain and Tensioner is it better to get the tool to do the link or is your method safe
@adventuresofhachem2 жыл бұрын
Hi, Good Day, the way i do connecting the two side of the chain together, i do this way very long time ago more then 25 years and never fail. when the chain connected good and right and making sure it is connected in the right way and locked Well on the two sides and moving well, i thing it will be safe and strong, if the mechanic who doing this job knows what he is doing. Thank you Very Much For Your Nice Comment.
@TheBigstrat2 жыл бұрын
@@adventuresofhachem thank you for excellent advice
@adventuresofhachem2 жыл бұрын
You are Welcome :) Good Night.
@khougar2 жыл бұрын
One question, what happens if I invert te valve gears ? If I put E in place of A and A in place of E?
@adventuresofhachem2 жыл бұрын
hi, if invert the chain gears E to the A and A to the E The Engine Timing will Never bi Right and the engine will not operate good as Should be and sometime can damage the valves too,Thanks for Watching New Helpful Videos Coming soon, Have a nice Day.
@khougar2 жыл бұрын
@@adventuresofhachem you are the best! Keep the good work! 🙏🏻
@SazzCharles Жыл бұрын
I am doing my timing chain now on a c180, but when I put the tensioner in, the timing on the bottom goes out of time?
@adventuresofhachem5 ай бұрын
Thanks for watching
@vjuknys83422 жыл бұрын
great video! you made this look easy
@adventuresofhachem2 жыл бұрын
Thank you! 😊
@adventuresofhachem2 жыл бұрын
Good Luck, Remember Safety first.
@vjuknys83422 жыл бұрын
@@adventuresofhachem just want to update you i have managed to change the chain no problem, this video helped me alot! hardest part was taking the alternator off and getting access to tensioner
@adventuresofhachem2 жыл бұрын
Good Luck and always remember Safety First, if you have a question you can ask no problem, Have a Nice day.
@adventuresofhachem2 жыл бұрын
Hi, Velo. it is normal for the exhaust manifold to get Hot and makes boiling sound from the oil that manifold get when working on this job, should clean the oil very well, but if it get !!Super Hot!! maybe the catalytic converter is Dirty and Blocked Maybe!, if You set the engine timing Right!! should be no Bent Valves. if the timing set wrong and the Valves bent engine will starts do misfire and Shake.
@marcinm7794 Жыл бұрын
Dziękuję za najlepszy film, jak wymienić rozrząd w m271. Pozdrawiam
@adventuresofhachem Жыл бұрын
Thanks 😊 for watching , have a great day 😀.
@cristiarciri15832 жыл бұрын
You are the best. Quite easily
@adventuresofhachem2 жыл бұрын
Thank You Very Much For Your Nice Replay, Have a Nice Day.
@nazmymusic6712 Жыл бұрын
The Best Mercedes Benz Man😊👍👍👋
@hydorah Жыл бұрын
Quick question mate, can an exhaust cam phaser / timing gear be so bad the engine can't start? Mine turns over with good compression but I get a code P0366 I tried a new exhaust cam sensor but still have P0366 and engine cranking but no start. I'm wondering if it's worth buying a timing kit and the locking tool and replacing the timing gears. Cheers!
@adventuresofhachem Жыл бұрын
Hello Mate. Make Sure Safety First. Try to put long Phillips Screwdriver in the Spark plug housing cylinder 1 and turn the engine by hand to get the piston number 1 up for sure, then look to the crankshaft harmonic balancer and make sure with the piston 1 up the OIT mark that on the balancer is on the engine make , if not that mean the rubber of the balancer is faulty and turned and will give wrong timing mark. if it is on the right mark. then check the cams marks make sure the marks of the cams gears are set with the mark that on the cams holder's marks or with the timing tool on. if the engine timing chain is right , check the engine compression . try to watch my video on my channel that says how to do engine compression test without tools and see how i do my way to check the engine compression test, !!! Remember Safety First , Safety Classes Must Be Worn. Good Luck and Stay Safe.
@hydorah Жыл бұрын
@@adventuresofhachem Thanks for the detailed answer! I took off the cam cover and the teeth on both timing gears are worn and the chain is slack, so I'll follow your guide and replace the timing gears and chain. Thanks for wish of good luck!
@hydorah Жыл бұрын
@@adventuresofhachem Quick update! Thanks for the tips! Car is fixed! New timing gears and chain - sorted! Running like a champ
@GaryRockwood-kt4qk8 ай бұрын
Hello I’d like to watch part 2 for w203 valve replacement thanks
@adventuresofhachem8 ай бұрын
Coming soon!
@marciohot33 Жыл бұрын
what is the number of the screw that you remove the chain tensioner?
@adventuresofhachem Жыл бұрын
17mm or 19 mm long socket
@berndrocket5178 ай бұрын
Doesn’t hit the pistons the valves if you turn it by hand without moving the valves???😮
@adventuresofhachem8 ай бұрын
Watch the video again. 🤔 and read its comments and the answers.
@aletzr Жыл бұрын
Hi, what brand vvt gears have you used? Any problems with those? Thanks!
@adventuresofhachem Жыл бұрын
Hi, for this engine, I was using after market gears ⚙️, ⚙️, they are good if they are good brand .
@mozee20012 жыл бұрын
Thanks for your video, really helped .
@adventuresofhachem2 жыл бұрын
You are very welcome, thanks 😊 for your Nice Comment 😀 Subscribe to my channel if you did not yet, thanks
@MirajeKuchkarov0911 ай бұрын
Perfect, very good job⚙️👨🔧👨🔧🔥🔥🔥
@adventuresofhachem10 ай бұрын
Thanks for watching
@Bimmerguy882 жыл бұрын
Very nice job brother! I LOVE to watch you work! I have a friend with a 2004 C230K Benz that needs this done and my only worry is that maybe he has bent valves. Is there easy way to tell if valves bent or not without first changing everything and then doing your 'Easy' Compression test??
@adventuresofhachem2 жыл бұрын
yes, there is.... on the top off the camshafts there is the camshafts holder , that big plate, when taking off the camshafts holder all valves will be closed all the way, then doing the easy engine Compression test mean blocking the spark plug housing with a plastic cup secured by wire to the engine and safety glasses must be worn, turning the engine slowly and when the plastic cup fly that mean the valves are not bent. :) good luck chain should be off with the camshafts to do this test if timing out , other way if the engine timing is right can do the easy Compression test without taking off the Camshafts plate.
@claudiobenavides-k7o7 күн бұрын
duktigt bra gjort👍
@adventuresofhachem5 күн бұрын
Thanks
@guru22152 жыл бұрын
can you make video on c300 v6 timing chain replacement?
@adventuresofhachem2 жыл бұрын
do you mean Mercedes ML350 Engine Timing Chain How To Setup? i will make a lot of engines timing chain, How to Setup videos. enshaa Allah.
@enginerepairguy Жыл бұрын
How different is the setup on the M274?
@adventuresofhachem Жыл бұрын
it is different engine.
@lenovop9030 Жыл бұрын
best M271 timing chain replacement with only the camshalft holder as special tool which is cheap besides which m271 version is more reliable the 1.6 kompressor found on the w204 which is fact the car you woked on on this video or the 1.8 turbo thankss
@Kslajdbj Жыл бұрын
Very helpful video brother. You got one more new subscriber here.
@bl4de2411 ай бұрын
Which Timing Chain kid did you buy?
@adventuresofhachem7 ай бұрын
Thanks for watching 👍 🙂
@justinryanyadao Жыл бұрын
Good job very helpful thanks for posting 😊
@adventuresofhachem Жыл бұрын
Thanks for the nice comment 👍
@khougar2 жыл бұрын
Hey Hachem, need your help one more time, the engine light on my panel is on, them I scan and find out the problem: P0010 OBDII: Camshaft position (CMP) actuator, intake/ left/front, bank 1 - circuit malfunction What cloud be the problem? Any suggestion? Thank you my friend!!🙏🏻
@adventuresofhachem2 жыл бұрын
Good Morning, for this engine fault code , i think maybe the big bolt that Holden the Gear under the intake actuator, that has 3 small bolt. has the open and close piston is Stuck because tightened too much , watch the video again and see how they pull in by them self, or timing wrong, or camshaft sensor, sometime camshaft is not good. maybe check the actuator for the intake cam. Good Luck.
@nislam1611 ай бұрын
And how much did this cost ? Labour and parts ?
@adventuresofhachem7 ай бұрын
not sure. 🤔
@e.t.88892 жыл бұрын
Great Job man!
@adventuresofhachem2 жыл бұрын
Thanks For Watching, & Have a Nice Day
@stephensteward20875 ай бұрын
Would this be the same for a 2012 Mercedes-Benz C Class 2.1 C250 CDI BlueEfficiency AMG Sport Plus ? Thank in advance :). , Fantastic video
@adventuresofhachem5 ай бұрын
This engine is different to C250 engine
@armanikurds22272 жыл бұрын
Respect very very good job thanks ✌️✌️🌹🌹🌹
@adventuresofhachem2 жыл бұрын
So nice of you To Comment like that, Thanks for your Nice Comment.
@elnekave522 жыл бұрын
עבודה מעולה, יישר כוח.
@adventuresofhachem2 жыл бұрын
Thank you for your nice comment.
@iosifmocanu78522 жыл бұрын
the other chain guide doesn't get to be changed?
@adventuresofhachem2 жыл бұрын
Hello Mate, The Right Side Timing Chain Guide to be changed need to remove the Timing Chain Cover and maybe the sump too, !!! Big Job !!! if the Right Chain Guide is in good Condition, i do not replace it, the chain pressure is on the guide that at the chain's Tensioner side. Thanks for Watching and Have a Nice Day.
@ZZ-ti5pm2 жыл бұрын
👍👍👍 great job
@adventuresofhachem2 жыл бұрын
Thank you! Cheers!
@Hjones19732 жыл бұрын
Great video Sir
@adventuresofhachem2 жыл бұрын
So nice of you. Thanks For Watching.
@safinserfiraz61282 жыл бұрын
Thank you for your video
@adventuresofhachem2 жыл бұрын
You are welcome Mr. Safin
@emilisgenderli5 ай бұрын
congrats i love it clean job
@adventuresofhachem5 ай бұрын
Glad you like it!
@macardabirturk9380 Жыл бұрын
great video great job
@adventuresofhachem Жыл бұрын
Glad you enjoyed it
@danitodorov50202 жыл бұрын
where is your service I want to visit you
@adventuresofhachem2 жыл бұрын
Hi, Thanks for your comment, soon i will do mobile mechanic service just for Saturday and Sunday 15 TO 20 Km around Liverpool NSW Enshaa allah, just for people who want a good job to be done well.
@firyadmaroof57452 жыл бұрын
your amazing thank you so Mach
@adventuresofhachem2 жыл бұрын
You're welcome!
@bricosluist2 жыл бұрын
Muy buen video me ha gustado mucho lo bien que lo desarrollas 10 de 10
@adventuresofhachem2 жыл бұрын
thank you very much for your nice comment, Subscribe to my channel to watch more video like this every week, thanks. muchas gracias por tu lindo comentario, suscríbete a mi canal para ver más videos como este cada semana, gracias.
@stevegreen22002 жыл бұрын
We'll done mate 👍
@adventuresofhachem2 жыл бұрын
i am happy that you liked my video, Thanks for your Nice Comment.
@peraltamenta10 ай бұрын
Good job, master.
@adventuresofhachem9 ай бұрын
You are super welcome to watch my videos on my channel.
@fariyad2749 Жыл бұрын
Very good videos
@antanpermata42732 жыл бұрын
during the whole video, kinda wondering where can i get that flash lamp? haha
@Mechanic.Bilverkstad2 жыл бұрын
Great jobb bro:)
@adventuresofhachem2 жыл бұрын
Thank You Very Much For Your Nice Comment, Subscribe to my channel to watch more videos like this every week. Thanks Bro.
@emekaibe8042 Жыл бұрын
Wow awesome job
@adventuresofhachem Жыл бұрын
Thanks for the nice comment 👍
@DaveBeatz11 ай бұрын
can you come to UK and do mine? :)
@adventuresofhachem8 ай бұрын
Thanks for watching and thanks for your nice comment 👍❤️
@ionutionut66732 жыл бұрын
nice work!!!
@adventuresofhachem2 жыл бұрын
Thanks for the visit
@L77G34N002 жыл бұрын
What a good video, many thanks.
@adventuresofhachem2 жыл бұрын
Glad you enjoyed it! Thanks for Watching.
@fish-v7w11 ай бұрын
really good video!!!!!!!
@adventuresofhachem8 ай бұрын
Thanks!!
@andreaswotschel47992 жыл бұрын
Sehr Gut! Danke!
@adventuresofhachem2 жыл бұрын
Du bist herzlich Willkommen you are very welcome
@alexdaniels83495 ай бұрын
Good work
@adventuresofhachem5 ай бұрын
Thanks
@fardin2522 жыл бұрын
Good job 👍 thanks bro
@adventuresofhachem2 жыл бұрын
Thank you too
@uoshingtonfranca45372 жыл бұрын
Muito top amigo👏👏
@adventuresofhachem2 жыл бұрын
Thank you Very much for your nice comment.
@Dadabyt.Makoya Жыл бұрын
you are good
@adventuresofhachem Жыл бұрын
Thanks for the nice comment 👍
@onlinevideokids7 ай бұрын
BEST EVER
@adventuresofhachem7 ай бұрын
Thanks for watching and thanks for your nice comment 👍❤️