Mercedes c300 LED emblem installation.

2015 C300 Mercedes 4matic LED emblem installation. Quick and easy way to install the emblem. I am not a mechanic or technician. If you see something wrong with my installation please message me. Mercedes, led emblem install.
How to, DIY
#c300, #Mercedes, #led,

[@adamhill1676]

Yep

[@bkhan7866]

What is the thing quote plug that in can you go into detail and provide us exactly what the item is even if you could look it up online... I know it's like a relay or fuse looking device but if you can kind of break that down greatly appreciate it

[@andufuse640]

we make fuse and fuseholder and wireharness for car

[@MarkelyHG]

Hey nice video but i have a quick question, i seen alot of video using fuse with the number 5 on it and yours are 15 whats the difference ?

[@babybearjaxsonlongo1702]

It depends on the empty slot you are using. Use your fuse box diagram to decide which amp to use

[@kevinmorton4439]

Yellow wire is low beam But. Well done.

[@babybearjaxsonlongo1702]

Maybe that's why I had constant power going to the LED emblem. Thanks for the heads up.

[@mrlilep386]

Is this the yellow wire on the left headlight (when facing the car). Because on the right side there is no yellow

[@alexxcccc]

hi i have a short question if you could help me your installation looks good but you also tried from the headlight mount led star and did you have problems with it because i have mounted a brabus led and i got problems with my headlights one doesn't work and the other works, so the question is where you mount that cable up to the others

[@alexxcccc]

what I have a problem now in one headlight works the other works and Brabus led instead it should be off when the car is not on it is on so I want the ssen on when the car is on

[@featman13]

I just did it same as you. Would have much preferred hooking up to the headlights so the star would have come on only with headlight

[@babybearjaxsonlongo1702]

Head lights are a pain to get to. There are also multiple wires going to the headlight. I tried, going to the headlight first. But the led emblem stayed on all the time, even when the car was off.

[@iansbuilt3478]

Ok but how do you know which fuse to plug it into my car doesn’t have the manual for it showing which ones are for the headlights and which ones aren’t. I have a 2008 c300

[@babybearjaxsonlongo1702]

I used the empty slot. If you google the year and make of your car, you can find the fuse diogram. You can order empty fuse's that you can put wires into. Hope it this helps. Let me know if you have any more questions

[@mrlilep386]

Is there a fuse that allows the lights to only come on during the night ? Instead of all the time. If so which fuse would that be. For c300 of course we have the same car.

[@babybearjaxsonlongo1702]

Unfortunately I do not know. I had tried using a fuse tap to mulitpe head light wires. The three wires I tried, all made the emblem stay on, even when the car is off. My only suggestion would be, a little more difficult, you can add a switched. You would have to run a wire from the engine to you dash board. Sorry

[@rickydtx214]

Use a 10 amp I just did it on my e350 2014

[@sigitafrianto9530]

What is the color of the wire for DRL light? What is the reason not to connect it to the blue tap near the head light cinnector as shown in your video? Thank you

[@babybearjaxsonlongo1702]

Sorry, I do not understand your question. What is DRL, I used a fuse tape to get power to the LED Light. Sorry. Can you explain. Thank you

[@babybearjaxsonlongo1702]

When I tap into the head light wires, the light stays on all the times. Even when the car is turned off.

[@UrFavoriteMusicLover]

That very first wire… whats it called? And how to unplug them properly?

[@babybearjaxsonlongo1702]

The led emblem comes with a Plug, male and female. They plug into each other. If you want to unplug it, there is a small tab, press with a screw driver and pull apart.

[@MarcellJjr]

Why did you cut a hole when there’s a hole in the back of the box?

[@babybearjaxsonlongo1702]

No hole. The fuse box is locked with screws and a cover

[@babybearjaxsonlongo1702]

The fuse box is enclosed there are no holes so you have to make an indent or you will crimp The Wire

[@ecuawezzy]

Does it work for a gl450 2008?

[@babybearjaxsonlongo1702]

Yes, all cars have empty fuse slots. Will work

[@geog1447]

How do I know where to put the fuse though? I don’t get it

[@babybearjaxsonlongo1702]

Google your year and make. Use an empty spot

[@geog1447]

@@babybearjaxsonlongo1702 I just wired them to my fog lights and worked out fine

[@babybearjaxsonlongo1702]

Comments are on

[@we_create3502]

I did it on the headlight fuse but once i turn of vehicle and light it stays on still .?

[@babybearjaxsonlongo1702]

@@we_create3502 you have to use an empty slot.

[@babybearjaxsonlongo1702]

@@we_create3502 watch the video, I say that there are live spots. That the light will always stay on, you will have an empty row of spots,