Mercedes ESP Inoperative Fault - Easy B34 Brake Pressure and Wheel Speed Sensor Repair

[@DrewFixIt]

I trust that you enjoy the video and if you would like to support the channel on an ongoing basis then please do consider joining the channel as a Member: kzbin.info/door/SKmO9BJWGYQbGZ6655wpqQjoin Cheers Drew

[@tedlu008]

Great video! Cleaning the sensor parts instead of replacing.

[@walangbuhok1]

How do you identify which wheel?

[@madsupervilian.]

Thanks, I really needed this for my. 2010 ML350 V6 4Matic. I have ESP inoperative indicator light that tends to come on time to time. Planning on getting the Icarsoft MB.V3

[@DrewFixIt]

Hi Mate, glad it helped! I think the MB V3 will be a super nice tool.. My CR PRO has equivalent of MB V2. I would really like to try out the MB V3, but can't justify the money at this stage for me!! Cheers Drew

[@halalli5480]

@@DrewFixIt My v3 does not do the esp says it is not available you might check it

[@charlievega7597]

​@@DrewFixIt what was symptoms?

[@DrewFixIt]

@@charlievega7597 Hi Charlie, there were no actual traditional “symptoms”, the car simply through up these errors on the dashboard which alerted me to the underlying issue. Cheers Drew

[@charlievega7597]

@@DrewFixIt when u inserted the key in ignition would it let you turn on the car?

[@justinm5725]

Does icarsoft tool work on all Mercedes?

[@DrewFixIt]

Yes mate, iCarsoft release updates to the software for the newer models over time. Note, if you have a vehicle of an age that does not have a OBD2 port, such as your 1960 Mercedes, then it won't be supported. Cheers Drew

[@tegnoresiente]

Great video , Whats the name of the sensor?

[@swollen4ever]

My esp switch is not working. I can’t turn my esp off. I changed abs module and traction module and esp switch. I know traction is working beixase I tried to slide the car, traction kicked in. I’m unable to turn it off from the switch. Any idea ? I have 2001 clk 320 w208

[@germanw.gordillo248]

Flowmeter or mass sensor, then this is not the problem? Thanks a lot

[@DrewFixIt]

Hi Mate , I’m not 100% sure but I would some sort of flow meter. Cheers Drew

[@alinuhadgalaxy]

Hello my friend my cls c219 2010 had the same issue from time to time specially when i pressed the acceleration pedal suddenly for boost and the electrician guy check it and said its faulty pedal I replaced the pedal and the issue the same now😢

[@rublinmafuku9161]

Hello Master, I hope you're doing well. Actually, I have a problem in my 2006 Mercedes ML350 car, in the parking lot it seems to accelerate normally but once on the road while driving, there is a yellow triangle shaped light that flashes after it there is a loss of power, the car refuses to accelerate and there are codes 1186 (p2004), 5130 (L6/4 speed sensor), 5110 (L6/2 speed sensor), and 7266 speedtronic sometimes not functional. but with the code p2004 the car worked normally no triangle light. but now as soon as the light flashes I can no longer move forward! Could the ABS be responsible for this problem? Thank you for your help please

[@DrewFixIt]

Hi Mate, it seems to me that looking at your codes I think that you have multiple issues happening at once. Had the p2004 been around for a while? To be honest I would work through each of the issues separately. Given that you imply that the p2004 was there before with no issues before the yellow triangle then I would start with the speed sensors. But you do need to address the p2004, which appears to be a manifold related issue. Cheers Drew

[@rublinmafuku9161]

@@DrewFixIt THANKS. I think I need to fix the ABS problem first to see the result. But is it also possible that the problem linked to the ABS could cause such a reaction?

[@dondada2014]

@@rublinmafuku9161hey did you get this fixed? I have the same thing happening with my c300 I just want to fix the issue when I accelerate and lose power when I press the gas all the way down, if I don’t press the gas all the way down the car drives fine

[@paulos.araujo3873]

Hi ..do you know if it works in a CLS diesel from 2007 cause i have same problem😊

[@DrewFixIt]

Hi Mate, I think it would be similar! Cheers Drew

[@JrAvalos-ho7fl]

Yeah I have our clans are 400 I changed the whole intake and still idles rough

[@isaacsuarez6289]

Just wondering My ESP light is just on constantly and I used a code reader the told me the codes for my engine that already knew not for the ESP so do u think the code reader u have will work ?

[@mrdarthmoke]

great stuff as usual Drew !!! do you think the icar soft would also work on my vito w447 ? cheers !

[@DrewFixIt]

Hi Sean, yes it works with the Mercedes Vito. Cheers Drew

[@mrdarthmoke]

So I finally found a icar soft MB V1.0, arrived yesterday. I have both esp and ans warning lights on the dash. they come and go, so I sometimes have cruis control, sometimes not. LOL Ran a diagnostic (with lights on) but faults came empty. A wee bit lost here ! Will try an update on the scanner tool. cheers !!

[@fernandoariel5823]

Hola a solucionado el problema ? Cual es el modelo de scan que funciona en Vito w447 mi vehículo es 111cdi. Saludos

[@kashawndralloyd1693]

I have a 08 cl550 and I had this problem

[@acdivine7]

Very Good,and thank you.

[@Randy-qq8lr]

Excellent video. Please keep making them.

[@DrewFixIt]

Thanks mate, will do!! Please like, subscribe and share to help the channel grow 🤣🤣🤣 Cheers Drew

[@zinguerie.77]

Bonjour 2006 modèle w251 classe r esp lumière est constamment allumé. C'est comme ça que je l'ai compris. véhicule 150 km. il ne dépasse pas la vitesse, pourrait-il provenir de l'esp

[@MrRishiard]

Great Video Drew thanks, I have a 2006 CLK 500 (A209) with an "ESP malfunction" message, do you think the icarsoft can scan my 2006 Mercedes?

[@DrewFixIt]

Hi Mate, yes I believe this scanner will scan your Mercedes! Cheers Drew

[@halalli5480]

My Ml 350 2007 the v3 does not

[@DrewFixIt]

@@halalli5480 Hi Hal, I have not personally used a MB v3, however I genuinely find this hard to believe that the v3 would not diagnose the ESP system. I suggest that you get in contact with iCarsoft as i think your unit maybe faulty. Cheers Drew

[@forestwoodservices6416]

Tanks you very very much

[@isaacsuarez6289]

I have a 03 Mercedes Benz C230 Kompressor

[@DrewFixIt]

Hi Isaac, any of the code readers in my storefront will work for you: www.DrewFixIt.com Cheers Drew

[@carloscastillo-lm2vn]

Thank you