Mercedes instrument cluster not working ?? TRY THIS FIRST!!!

[@BPROAUTO95]

My website ✅ www.bproautomotive.ca

[@SirDavidAsher]

I tried the battery first and that didn't work. Luckily, removing the fuse and putting it in while the car is one did the trick! Thank you!!!!! Saved me a ton of money!

[@BPROAUTO95]

No problem my friend 😊

[@jammiii3870]

I tried remove fuse and put it back put but cars wasnt on. Does it need to be on?

[@SirDavidAsher]

@@jammiii3870 I had it turned on when I tried it. Unfortunately, I have the same issue again, but it's just the screen now.. everything else is working though.

[@jammiii3870]

@@SirDavidAsher My screen is on but its empty.. and all else don't work.

[@erichernandez5413]

@@SirDavidAsherany luck?

[@ThegreatBoso]

Thank you so much. Thank you again, especially for giving straight to the point without wasting time.

[@BPROAUTO95]

No problem 👌🏼

[@BPROAUTO95]

@@Viewer765 I needed to use a scanner, I think any cheap obd code reader will do

[@TimSumer]

Thanks for the video! Unfortunately, this solution alone didn't solve my issue of the instrument panel not working on my 2009 c300 (w204). What solved it for me was removing the instrument cluster and unplugging it in the back while the engine was off, then putting the key in the ignition to the on position (engine not cranked), and then replugging the instrument cluster back in, and voila everything turned back on and is back to working normal.

[@BPROAUTO95]

So you did a hard reset on the cluster, nice 👍

[@mauriciogasca6516]

Thank you very much brother! It helped me a lot, I was in the same situation after removing my glove box and cleaning the air conditioning evaporator. I think it was a short circuit, but disconnecting the main battery worked to fix all the lights in my instrument cluster.

[@tomcolbey]

same, disconnected the battery, waited about a minute, then reconnected it, works perfect again./

[@BPROAUTO95]

Glad that it helped guys 😃

[@firasdaw7338]

It worked with me, removing the fuse 28 and putting it back works well. Thanks

[@BPROAUTO95]

Glad that it helped ✌️

[@r0b3rt35]

Remove and putting back the fise while the engine is starting?

[@BPROAUTO95]

@@r0b3rt35 yes, trying to do a hard reset

[@kunukmuller]

Thanks for the video! I had same problem and it fixed as I removed the functioning fuse and putted it back on 😅

[@BPROAUTO95]

Nice, good that it helped

[@GandRpictures]

Nice! I have the same problem today. I'm gonna try this when I get home.

[@BPROAUTO95]

did it work ?

[@vitek924]

But do not remove the negative cable from the battery while the car is running, do it with ignition on only!..he forgot to say that. If you disconnect the negative cable while the car is running the alternator will throw like 18 V and can damage the computer.

[@BPROAUTO95]

There is a voltage regulator on back of the alternator that will regulate the voltage, but you are 100%correct. Turn of engine, before disconnecting the battery !!!!!

[@frankpineda1832]

I’m having the same problem with my 1999 clk320, I will try your method hopefully that will work

[@smelmybut]

Good info. ...and good info (comment) about having ignition on but not engine running.👍

[@timothyangel3968]

thanks man, this really worked for me today👌🏽

[@BPROAUTO95]

@@timothyangel3968 all good hah

[@physicscalculations887]

I just felt that I need to give an update. Hello Guys! I had the same problem for the past two days. I tried all these methods but it didn’t work for me. I continued driving the car with the same problem. I put on the ignition so as to drive to the mechanic workshop and boom!!! My dashboard was back again😂

[@henryloc5]

Hey thank you for this. You solved my problem and I appreciate your video.

[@BPROAUTO95]

Thank you for commenting too😀😀

[@stephanievee1617]

Trying this after work today! Fingered crossed it works on my cla 250 🤞🏼

[@BPROAUTO95]

@@stephanievee1617 haha please let us know how it goes 👌🏼

[@maximilianocota9897]

What is wrong with your cluster? My 2016 mb cls 250 has a bunch f lights on the cluster… lmk if it fixes something pleaseeee

[@stevengeary4261]

Well done Benson Yu, great video that sorted our blank instrument cluster with the hard reset. Saved me a heap of money, thanks again.

[@BPROAUTO95]

No problem man, glad that it helps

[@davidramirez1197]

Great video and thanks!!!

[@BPROAUTO95]

No problem!

[@khurramali11]

Great video, the hard reset with the key in worked for me

[@BPROAUTO95]

Nice 👍,trying to help all the ppl here

[@tudybenavidez6465]

It helped turn the cluster back on ??

[@tudybenavidez6465]

I also have Mercedes’ 300. I tried the fuse and the negative off n nothing yet

[@saajanchhaya8187]

Thank you, resetting the fuse solved my problem in 4 dollars. Just had to buy the new fuse.

[@BPROAUTO95]

Nice 👍

[@sileapek3372]

Thank you, that what I have problems with my CLK 320 ran out battery while I was in the hospital over a month

[@trushiesty6377]

Thanks fam saved me 100$ from a lousy mechanic thanks tho fr you the 🐐 💪🏽😂

[@leonforte7139]

Good Demonstration that lets one know there are options ,so don't Panic and give Your Money away, Thks again. 😎

[@BPROAUTO95]

Haha that’s is so true, my friend brought it to me for a second optional haha

[@raquelb731]

Wow thank you I’m going to try this now

[@BPROAUTO95]

No problem, let us know how it goes

[@TheKrisg]

Will try it ,thanks

[@ThegreatBoso]

Thank you so much. I did the battery reset and it worked perfectly for me. I wish I could give you a 100 like.

[@BPROAUTO95]

Glad that it helped 🫡🫡

[@stacycampbell2182]

Hey when you do the hard reset, does the engine need to be running

[@VulcanLogic]

Fuse reset while running worked right away. C300 2013.

[@BPROAUTO95]

Glad that it helped 😬

[@FuriousFox18]

Do we take the negative while the car is running or no ?

[@BPROAUTO95]

When the engine it’s NOT running, only ignition on

[@hurd0722]

Is it work on 2015 e300?

[@BPROAUTO95]

Remove the negative cable when engine is NOT running, sorry for the confusion

[@imt1217]

remove the negative with the engine on?

[@BPROAUTO95]

With key on , engine off

[@imt1217]

@@BPROAUTO95 thanks

[@BPROAUTO95]

@@imt1217 did it work for you ?

[@imt1217]

@@BPROAUTO95 will try tomorrow and i'll let you know.

[@imt1217]

@@BPROAUTO95 ok, so i removed the fuse (engine on) it didn't worked at first, the dashboard remained lit even after i removed my key (it wasn't turning on before that), but the 2nd day it was working just fine.

[@tirkedj]

I have A class 05-12, gauge cluster (and that central display) stops working for some time, then comes back on. Always when it doesent work also sound for turning signals doesent sound... Second time, gauge cluster sudenly while I was driving came back on, but all pointers were stuck at some position for some time and ESC (yellow triangle) goes on when I speed up, so when i press gas pedal it basicly doesent allow car to have high rpm and speed up in a usual way but I need to do it smoothly. I stopped the car for a bit and shut down engine removed the key, and when i started engine again gauge cluster and everything else worked fine... now it happened third time, cluster doesent work and in the back I believe it turns on again ESC because again it wont allow me to get speed so I must be "gentle" with a gas pedal to get into higher gear... That happens only when Gauge cluster doesent work, three times in last two months. When gauge cluster comes back, everything is okay... It came to my mind to check that fuse box, maybe some contact is not okay or whatever, i dont know even if I open it what exactly I need to look...I believe its some small stupid thing that doesent cost so much, but if I go to the Service they will take 1000€ in a second, and my whole car costs about that much.

[@paulgill7222]

Did you find and solved the problem?

[@mikeab2871]

What about my cluster on my 2007 Mercedes clk550? The cluster isn’t working either. It’s completely blank

[@r0b3rt35]

I have same issue with the instrument cluster and also since it stoped working, my trunk gets stuk while engine is on and mirrors not longer fold.. i removed the fuse while the engine was off, i ll try with it on.. i hope that it will works

[@blublublah]

Thanks. The battery removal worked. But how did you get rid of the check engine light later?

[@BPROAUTO95]

I needed to used a scanner to clear it

[@blublublah]

@@BPROAUTO95 thanks for the reply. I had seen a tip where pressing the car start button without your foot on the brake, and leaving it in that "standby" mode (or whatever it's called) for 10 seconds would clear it and that worked for me

[@smoknonkermit8011]

Having a similar issue with the 2004 c320, instrument cluster, windows and turn signals just stopped working. Replaced the fuse, replaced my battery and connectors, nothing has changed. Will give these tips a go when I get home If anyone has any advice besides selling the car lol I would love to hear it!!!!

[@BPROAUTO95]

Yeah give it a try, if not working, maybe do a cap discharge overnight

[@chineduoputa8905]

Did you fix it?

[@smoknonkermit8011]

@@chineduoputa8905 replaced the battery and the terminals and it was still giving me issues. I did also try to clean up my fusebox under the hood a bit and thank God it sorta just decided to start working again eventually. Was just sendin er using arm turn signals and guessing my mph/fuel for a bit though.

[@jokerplayz6363]

I have a Mercedes A170 W168 2001 disel and i have an issue with the cluster table it stops working after i drive for a while and i have to stop somewhere and disconnect the negative and reconnect it but the issue still keeps up after that. Any Permanent fix for this?

[@putrariansyah]

Hi! I have similar issues detailed below: 1. Cluster suddenly just stuck. All of em. Rev counter, speedo, fuel gauge. Lcd suddenly off as well 2. Wipers wont worked now 3. Turn signals worked but the beep inside the car is not 4. My lights wont turned off😂 These all happening all of the sudden and I want to try your methods. Just to be clear, so your methods is turn the engine on, and while it is on, disconnect the negative only on the battery right?

[@tarencemusako9526]

Hi did you sort out your issue I have a same problem

[@jivedude1902]

So what did you do with the engine light pls?

[@BPROAUTO95]

I cleared it with a scanner

[@MrJogeept]

Hi I just wanted to make sure if this would work. Safely on 2017 gla 250? Thank you

[@BPROAUTO95]

Yes, check power fuse if good then do a battery disconnect

[@1995karolis]

My cluster not working. Cluster Fuse showing higher voltage on tester than all others. What that means?

[@abbasmatoory7083]

Hi what if you tried both and they didn’t work what should you do

[@terrellscaife2411]

Will that also work on a 1996 I just swapped out the batteries and now the gauge cluster is not responding

[@BPROAUTO95]

Try to do a cap discharge

[@terrellscaife2411]

Do you have a video of that process

[@joelrichloow1021]

I have a similar issue, with the turn signals and all small electrical things just lagging and won’t work sometimes. But I get the message “display faulty visit workshop”, I heard that it may be water in the computer, but where? Anyone know where to look for water or something? I’m going mad I can’t find shit.

[@BPROAUTO95]

You can remove the instrument cluster and check the connectors in the back, see if any corrosion

[@joelrichloow1021]

@@BPROAUTO95 Yeah I will do that, thanks! Have you ever seen this error code before? I mean do you know any possible solutions if this doesn’t work?

[@BPROAUTO95]

@@joelrichloow1021 umm if you have a OBD scanner, scan it first

[@BPROAUTO95]

@@joelrichloow1021 fault codes in gateway might cause wired things

[@StevenGriffin-h2z]

In my case I got lucky. It was just the fuse

[@BPROAUTO95]

That’s good hah, cluster never really go back ahah

[@gbodyp1388]

What about a 2003 S 500? Will this reset work on it? Dash and radio are out as well

[@BPROAUTO95]

Sound a module is defective

[@jP-zh2dc]

When you disconnect the battery is the car supposed to be on or off ??

[@BPROAUTO95]

Key on

[@DannyFerri]

The video doesn't specify regarding the battery. Do you disconnect the negative on the battery while the engine is running? Or do u do it with engine off?

[@BPROAUTO95]

Sorry for the confusion, I disconnect the battery while the engine is off, ignition off, key out.

[@DannyFerri]

Ok thought so. But wasn't sure. The manual specifically says not to disconnect the battery while engine is running.. So I tried disconnecting the battery with engine off and key out.. worked right away. Couldn't find the fuse .. I have a 2015 E320. So looks to be different. Anyways. The battery trick worked! Thanks so much for the video!

[@BPROAUTO95]

@@DannyFerri no problem Danny 👌🏼

[@makarena2890]

My speedometer is not working the rest is okay, I tried your tip but it Didn't help. Is there anything else i could try?

[@BPROAUTO95]

Check the vehicle speed sensor

[@makarena2890]

@@BPROAUTO95 the speed shows up on the diagnostic computer while driving

[@BPROAUTO95]

@@makarena2890 try to do a basic setting the cluster 017

[@Mari_From65th]

Hey question I have a full digital lcd instrument cluster for my 2018 e300 but the speedometer side (left side) isn’t powering up only the radio side (right side) anybody have a solution to fix that

[@Craft.1]

When I insert the key, it does not turn, and the fan turns on automatically. Mercedes w220 s500

[@MANNYKARGAR]

hi would this work on c200 2012 ? thank you

[@BPROAUTO95]

Yes it will work

[@alinovasseko5034]

Hey boss I’m having the same issue

[@BPROAUTO95]

Did my tips helped ?

[@janregorsek]

do you have a tip for cla 35amg 2020 the digital cluster jist shut itself of the car works just the screen don show nothing it just goes black

[@BPROAUTO95]

Can you check the aux battery voltage ?

[@janregorsek]

@@BPROAUTO95 no i havent but could it possilby be an fuse issue?

[@BPROAUTO95]

@@janregorsek if it turns on and turns off by itshelf, its prob the cluster or software

[@1GQ_gent]

I'm getting buzzing sound during 15-20mph acceleration😢 so annoying 🙄

[@skivjanyy]

I tryit but hard reset i put it on computer is writing 51 permanent problems only because the battery was low

[@furqanplayz79]

Code 7900 c class 400

[@eddieperez7617]

My light is on but I got no display and gauges aren’t reading anything

[@eddieperez7617]

Also dash light stays on even after I lock it

[@BPROAUTO95]

@@eddieperez7617 did you try the hard reset

[@eddieperez7617]

@@BPROAUTO95 yes I did I just bout a some new fuses abt to see if it fixes anything

[@BPROAUTO95]

@@eddieperez7617 if the fuse is not broken, no need to change them, do a hard reset, unplug the cluster connector in the back while the key is on

[@eddieperez7617]

@@BPROAUTO95 ok I’ll try that thanks for taking the time to reply to me 👏🏼

[@furqanplayz79]

Hello

[@frankpineda1832]

I replaced the fuses in my 99 clk320 with no avail, disconnected the battery and the problem remains, any subjections anyone?

[@chineduoputa8905]

Did you find a solution?

[@ponchoaag]

does any one what is this code codigo c221500