Mercedes ML350 Mass Air Flow Sensor Replacement

[@terriel41]

Hey bro ,I appreciate all that you do to help others save money.

[@eddythemanwiththehat7286]

I’m glad I am bringing some happiness and love to your spirit. You have helped me so much with my vehicle. You have also also inspired me to create a KZbin channel and share my lifetime of knowledge as a commercial photographer of over 40 years. I hope I can be a smooth and easy to watch as you are. Peace Bro.

[@iRepairAutos]

Awesome!!!! What's the name of the channel? I love photography and play with it from time to time.

[@eddythemanwiththehat7286]

kzbin.info/www/bejne/gJabnoahjrSKnck. Eddy Jalbert - this channel was just for a few friends and to show the past days in Montreal. In 1993 after a lifetime of living the life I started a project called backs for breast cancer. Pure photography no money involved. I wanted to create images that could move a gallery viewer to tears through the power of intention and quantum physics. 21 years later My public gallery exhibit occurred in 2014. I have been waiting for a spark to move onto the next phase. Your videos have lit a fire 🔥 to create again and share with others a lost art form. You never know where the message will come from, Thank you Bro.

[@eddythemanwiththehat7286]

I cannot thank you enough. Sending you and yours nothing but Love Bro. I have learned allot and saving thousands on my Ml 350 2006. 🙏

[@iRepairAutos]

Eddy your feedback made my day. Feeling a bit down as I've been in the house since last week. Covid-19 quarantine. Thanks for thre cheer up. Stay safe and well.

[@wency101]

Great video! Thank for sharing this with us.

[@freddysims1494]

Thank you boss you’ve been very helpful keep posting your videos your content is great

[@tucumcari45]

Thank you, it was easy to do with your instructions.

[@scotthart6237]

Dude 2007 GL450 and I can’t get that rear clip up onto the air filter box! What am I doing wrong?

[@daniellie637]

Did you ever figure out how to get the clip on it . I am struggling too

[@1ELiMusic]

Hey. I replaced my 4 shocks, struts, springs, stabilizer bars... and now my GLK350 intermittently shakes and has this low frequency bass sound. This sound comes and goes. What do you think it can be??

[@olatunjiatere5490]

My ML 350 is pushing beyond 20/30 KM in the speedometer and not commiserating with the speed when i push the acceleration, what might be causing this?

[@101lukman]

Do you remember what type of screws you used to take that out?

[@billbutler10]

What happens if the car won't start at all

[@martylucas8557]

Hi Kieth, thank you! Your video is exactly what I was looking for, in order to do some work on my 2008 ML350. It’s strange…on Amazon I’ve found Mass Airflow Sensors ranging from $30 - $350. They look the same, however I know that there has to be a difference in build quality and warranty between them…possibly. What is your recommendation? I found the same situation with the spark plugs and coils, prices for 6 plugs and coils ranging from $86 - $300. The lower priced plugs (they’re iridium BDFHYK is the brand name) had a better rating than the Bosch for $almost $300. I’d really like to get your input!!! Thann be me again!

[@iRepairAutos]

I’ve tried the cheap parts and the genuine parts. With electronics, variations in voltage readings and inconsistent output especially when the components get warm to hot to cold. Failure comes even faster and when climate conditions are at the most extreme. Try cleaning the original parts before replacing them especially with cheap parts.

[@concernedparent6291]

Hello Keith. Thank you for making this video. They really help me a lot since I got fed up with Mechanics cheating me so much because I drive a GL450. Now I do everything myself after watching your videos. Anyway, I accidentally removed the clip behind the engine air intake and now the dreaded 'check engine light' is on. Any help on how to reinstall it? The U-shaped clip that you installed last.

[@scotthart6237]

Luckily I don’t have a light, but I can’t get that clip up either! I used vaseline to lube all seals to make sure there’s no air leaks and they seat super tight!

[@daysi3106]

Thank you sir 🙏

[@abrahandelgado4535]

Forzosamente es necesario desmontar para limpiar el sensor?

[@nicks6903]

Thank

[@HoneyDubey23]

Thank You Sir!

[@puwanasparennarayanasamy7785]

Cls 350 year 2005. Ingen raning car no moving ?

[@freddysims1494]

I need your help. My Mercedes gear shift keep going back into park when i come to a stop should I have the lever changed ?

[@iRepairAutos]

I would examine the whole module. Something may have come loose. If nothing is obvious, then exchange the whole module.

[@Hunterlord12]

Gave a general overview... very difficult to tell what's going on because of video quality

[@youngmack5206]

Will this cause my car not to acceleration

[@iRepairAutos]

That's one of the symptoms, rough idle, etc.

[@landoftheblinded2]

cant you just spray in it and let it dry without removing it?

[@iRepairAutos]

You can try that first. You might be lucky.

[@equilibriumfilesprostnimelo]

are you a technician?

[@iRepairAutos]

Nah. Those guys are great resources though.

[@illwills]

Salute Keith. I just received an email from Mercedes Benz. It's an email alerting they have a recall. You have to put in your VIN Number. I can send you the email let me know? Thank you, as always for your content.

[@freddysims1494]

illwills Hey can you share that email?

[@iRepairAutos]

Hi illwills, yes I got that email too. I haven't tried it out yet. Have you?

[@illwills]

@@freddysims1494 yes here is the link www.mbusa.com/en/recall

[@illwills]

@@iRepairAutos I haven't tried. I'm going to try it this evening ML 350 has a power steering leaking. I missed that one.

[@afg599]

That’s not ml 350