Mercedes Sprinter Campervan - Kitchen Units

How to make kitchen units for your Mercedes Sprinter Van Conversion using the same technique that home kitchen cupboard carcasses are made.
Morland UK new Vehicle Inspiration page and online shop can be found here:-
shop.morlanduk.com/inspiration
shop.morlanduk.com/
Listen to my Vansformation podcast online via this link
vansformation.com/15/
Or download it to your Apple iTunes-enabled device via this link
itunes.apple.com/us/podcast/i...
If you would like to purchase some of the tools I have used in these videos here are the links
Dometic CRX50 12v Compressor Fridge - rover.ebay.com/rover/1/710-53...
Thetford Triplex Oven and Hob - rover.ebay.com/rover/1/710-53...
Thetford Argent Bowl - www.thetford-europe.com/produ...
Veritas Marking gauge - rover.ebay.com/rover/1/710-53...
Bosch PST 700 compact Jigsaw - rover.ebay.com/rover/1/710-53...
Trend Router Depth Gauge - rover.ebay.com/rover/1/710-53...
Silverline Brad Nailer - rover.ebay.com/rover/1/710-53...
Makita Plunge Router - rover.ebay.com/rover/1/710-53...
Dewalt Battery Drill and Driver - rover.ebay.com/rover/1/710-53...
Dewalt Trim Router - rover.ebay.com/rover/1/710-53...
Bessey Lever Clamps - rover.ebay.com/rover/1/710-53...
Freud Saw Blades - rover.ebay.com/rover/1/710-53...
Disclosure - As an eBay Partner, I may be compensated if you make a purchase using the above affiliate link. Thank you for supporting our channel.
Don't forget to give me a shout-out on social media and link back to me if you think others would benefit from this information.
If you have found these videos to be useful to you and would like to make a donation you can do so at www.paypal.me/gregvirgoe
Please do make sure you subscribe and thank you for watching.
Greg Virgoe
#gregvirgoe #vanlife #tinyhome

[@zahidmahmood6194]

I generally don't leave any comments. But this man absolutely deserves the praise. One of the best explanation on van build.

[@nomadicgearonline4014]

The quality of your work is unmatched. Beat van build on youtube.

[@GregVirgoe]

Many thanks

[@larswyder3283]

Literally best conversion videos on here! definitely gonna be using some of your tips, keep it up!!

[@bloodredsky182]

Best description of cabinet building on youtube I've seen yet! Thank you very much!

[@stevehulme6497]

Thanks for a great video, we’ve just ordered our van so I’ll be watching them all for help and advice. Thanks again.

[@johnmcdonald9977]

I am about to strip out my less than perfect conversion of a Citroen Relay L3H2, and now cannot wait to get started! I find the simplicity of your explanations perfect for a person of my skill level and am sure I can make a much better attempt in my future layout. Thank you very much for the inspiration and confidence building. Even though I don't have all the equipment you use I am sure I can do everything much neater and be happier with my finish!

[@JEll123]

As always spot on. All the details without being over the top. Nice one.👍

[@GregVirgoe]

Many thanks

[@rajeevbhatt6842]

You are a highly skilled and methodical guy. Salute from an Engineer.

[@kevgermany]

Thanks again. Just rewatching as I start my own conversion. Has answered many questions. 👍

[@GregVirgoe]

kevgermany pleased it’s still helping you with your build.

[@brianboczko7169]

just one word young man OUTSTANDING

[@GregVirgoe]

I like the young bit lol cheers

[@MyMartin1230]

You work is amazing and the advice you give freely is appreciated so much thank you

[@GregVirgoe]

You are so welcome

[@mrtreutiger]

How can anyone give this guy or any of the episodes a thumbs down? What you do here Greg is absolutely brilliant!

[@GregVirgoe]

Anders Tiger I get them the moment they are released so it really means nothing. In fact they have to give me a view to give me a thumbs down so I’m still earning from them 🤪😂

[@nagualdesign]

I expect Morland will have had a large increase in visitors to their website thanks to you. I hope they show their appreciation by offering you some free gifts, or maybe even paying you to do a video series especially for them, showing all the different ways to make best use of the products they offer. I'm sure they must see you as a godsend.

[@GregVirgoe]

I did get a good discount in return for mentioning them in the videos. I also now have my videos on their website so bit of mutual networking all helps

[@petrhanak7230]

Paráda Gregu . líbí se mi že vše děláš opravdu poctivě a nikam nespěcháš . Někdy vidím že si vestavbu chtějí udělat co nejrychleji ale také to podle toho vypadá . Nevyužitý prostor , tuny silikonu atd . Držím palec ať se daří dále a těším se na další díly ! Z České republiky zdraví Petr

[@ShananigansDownunder]

Hi Greg LOVE you videos and all the tips you give that others don't. GREAT work mate from down under Andrew

[@re33ce]

Great workmanship as always, can't wait to see the next installment,👏 👏

[@GregVirgoe]

Really appreciated Michael

[@jantrapnell01able]

Again, exceptional! Top quality design and construction. You rock!!

[@GregVirgoe]

Thank you Jan, much appreciated

[@debramoss2267]

Ha, we're getting bamboo, too. It's sustainable, light and tough. Perfect!

[@rcheliperformance]

can you do a video on your gas and plumbing install as much details as possible please. your videos are a true craftsman at work and inspire me to push not only my van conversion skills up a level but also my woodworking skills up. thank you so much for putting in all the effort you have for your truly world class videos. inspired doesn't even cut it! pun intended.

[@GregVirgoe]

Yes, I have very detailed videos on both gas and water to be out very soon. Thanks for the great feedback

[@dubioushumor9243]

Always know its going to be a good day when I get to see a new video from Greg

[@GregVirgoe]

That's really kind of you thanks

[@miguelblanco3629]

Hi Greg. Just stopping by to say hi. I've been loving to watch your videos for the van conversion. I love your attention to details and your design process. Refreshing, especially when compared to some of the somewhat haphazard conversions that I have seen in other videos. Keep up the good work! Kudos for taking that big step and quitting work for a bit.

[@GregVirgoe]

Thank you for taking the time to leave a comment Glad you are enjoying the build so far

[@giridharg82]

Such meticulous & planned out approach. Superb!

[@GregVirgoe]

Thank you

[@ARepublicIfYouCanKeepIt]

Beautiful work again Greg. Looking forward to what's next as you close in on completing the build.

[@GregVirgoe]

Thanks again John, It comes together really quickly in the end. The furniture has been the most fun so far because it makes the biggest impact

[@renehagenam5549]

I really appreciate all the videos that are very useful to me since I am starting the refitting of a Citroen jumper. Very nice work and good luck.

[@GregVirgoe]

Rene Hagenam thank you for such great feedback and good luck with your build 😃

[@jasoncolahan6399]

Your explanation and quality of work is expert level. Love to watch your videos from Miami Florida USA. Keep up the good work.

[@GregVirgoe]

Hi Jason, I’ve never been to Miami, is it as beautiful as it looks in the pictures?

[@jasoncolahan6399]

Greg Virgoe Yes it is. Sand and sun. Warm all year.

[@BudhagRizzo]

That is coming along beautifully!

[@GregVirgoe]

much appreciated

[@pierrearmstrong8409]

thank you Greg from quebec canada very good tips

[@richardwelsh4489]

Excellent video as always thank you so much for all your videos they are so helpful. Thanks again.

[@flurblewibble7735]

Yet again superb quality and content. Thanks for posting the links to tools etc.

[@GregVirgoe]

Pleased it is useful to you

[@noelnestor3159]

Excellent Greg, thank you for sharing your knowledge. Keep em coming!!! 😎

[@GregVirgoe]

There's still a few more build videos to be released :D

[@cliffp.8396]

I always enjoy the quality and content of your videos.

[@GregVirgoe]

Thanks once again Cliff

[@DJRogEurotour]

Just the inspiration I needed for the weekend, My kitchen all planned so lets get making. Thanks again.

[@katcankan7129]

Good luck 👍

[@DJRogEurotour]

For sure Greg makes it look so easy !!!!!

[@katcankan7129]

Roger Wilson - He does but l am sure you'll do your best👍

[@Macktheknife11]

Another excellent video Greg, as always.

[@GregVirgoe]

Thanks again

[@kquitberg4297]

I hope at some point you do an e book. Great ideas. I love you taking us through the math on insulation and solar system. I’m a geek and didn’t know it!

[@GregVirgoe]

That is one thing I plan to put together while we are travelling when I have more time to compile the information.

[@wayne6220]

Hi Greg, keep up the videos, they are really good. I really enjoy watching them.

[@GregVirgoe]

No problem , plenty more in the editing suite :D

[@SteveMorton]

Another great video Greg and wonderful that Moreland have recognised your skills to include your videos on their site.

[@GregVirgoe]

Yes, I was really pleased with the amount of exposure on their new website. Very flattering

[@mmanut]

Styling. Very Comfortable & Impressive‼️👍👍 Vinny 🇺🇸

[@chrisanderson8578]

Glad I discovered your channel. Your explanations and attention to detail stand out. I watch quite a lot of wood working videos but very few seem to be on par with yours. Well done. Hopefully lots of sponsorship comes your way.

[@GregVirgoe]

That's very nice of you, fingers crossed hey lol

[@yak3u]

Thanks for the great video, Greg. We are watching you from Russia.

[@GregVirgoe]

Thank you, amazing that my videos are reaching all corners of the globe :D

[@stephendavis7707]

I would love a motorhome but now i dont think i would be happy with what i was originally thinking of you have spoiled me ..!! In truth i have learnt a lot from just watching your build so thanks for sharing i wont only use what i have learnt for a motorhome but for many other things too so i appreciate you taking the time to share ..

[@GregVirgoe]

Thank you Stephen, there are many ways to skin a cat and I think its great that everyone can put there own stamp on a build, that's the beauty of self-building.

[@kevgermany]

Lovely work. Learning lots. Thanks again!

[@GregVirgoe]

Thanks for the continued support

[@JasperIjpelaar]

it's coming along nicely, really liked the detailed video's. big thumbs up.

[@GregVirgoe]

Yeah the furniture is making the biggest impact on how it now looks

[@jerrybootneck1736]

Pure excellence as usual.

[@GregVirgoe]

Cheers Jerry

[@alekseykonovalik5965]

Greg, great videos, really understandable, thanks very much. You must be a scientist!

[@GregVirgoe]

Thank you Aleksey, I’m a mechanical services design engineer by trade 😊

[@donjones3355]

Another excellent video Greg! Thank you!!

[@GregVirgoe]

You are welcome Don

[@derekt7606]

Such a well presented tutorial fantastic to watch and a great inspiration. Small world but I live on the side of a mountain that overlooks the Morlands factory which I never knew existed until you mentioned it on your video. I think in that episode you mentioned North Wales when in fact you were in Mid Wales 😉

[@GregVirgoe]

I was amazed at how big they are, they seem to own every unit on that industrial estate?

[@bluescarver9522]

Nice work fella, I do like your videos. Nice mix of method and details....

[@GregVirgoe]

I watch a lot of KZbin videos and I like to see things being cut and drilled etc Rather than all the work being done off camera at least you can see me actually doing it 😊

[@dibley1973]

Great detail as usual. Thanks +Greg.

[@tristanhelzer5009]

Thanks for another great video! I'm learning a lot about what I'm going to change for my second build.

[@GregVirgoe]

What van have you currently got and how do you use it?

[@tristanhelzer5009]

Greg Virgoe I have a 2001 Ford E150 Cargo that I have been living out of full time for a just over a year now

[@GregVirgoe]

Tristan, amazing I bet you have loads of useful things you could share on your experiences

[@h20ktmmclennan69]

Hi Greg, I'm about to start our new Ducato XL conversion so your videos have been really been helpful especially all the insulation & electrical calcs earlier in the series & now really enjoying the finishing stages. I'll be employing many of your ideas in our build. Being a plumber, I noticed you had a normal water seal trap included in the kitchen sink kit. I'd recommend using 1.25" or 1.5" Hepworth (Hep) or Osma self sealing Traps on any appliance as it uses a self closing siliconised rubber seal rather than a traditional 50-75mm water seal which can easily be lost with the stationary angle of the van & of course the movement of driving allowing foul smells of the waste pipe & grey water tank to vent back into the van. These traps can be fitted with the manufacturer's right angled knuckle bend which connects to the appliance converting it to horizontal where space is tight. Hope my tuppence worth helps you & fellow subscribers. Keep up the good work Greg.

[@GregVirgoe]

That's a valid point when driving around the water could come out of the bottle trap. Think I will consider changing it to a HepvO and locate it in the vertical at the back of the cupboard freeing up valuable cupboard space.

[@MuddyBootz]

Simply the best!!!!

[@GregVirgoe]

Many thanks

[@williamdonnelly2705]

Well done once again Greg and thanks

[@GregVirgoe]

my pleasure William

[@jasminjanie]

A page inspiration with your vids in it.... Makes really sense to me :)

[@jpracing3592]

Hi greg your KZbin channel is great I am doing my 2016 crafter watch your videos loads

[@evelynrobles5513]

Awesome great job 👌🏼🙏🏼❤️

[@wetnwild494]

Such a clever bloke, I'm a tradesman my self and have been for the last 10 years, just goes to show how much you can learn from different trades. Thoroughly enjoy your videos mate and I will try and make it to the camp next year to have a look at this masterpiece. Looking forward to the next episode.

[@GregVirgoe]

Look forward to meeting you. I have done a desk job for 30 years so I'm learning all the time. Always loved making things, from motorbikes to kit cars and now woodworking in the last 2 years Next I want to learn how to weld and get a lathe :D

[@wetnwild494]

Greg Virgoe wow I thought you were a builder a carpenter to be exact.

[@Wishwader]

Enjoyed your podcast Greg. Sounded like a good host too. She was clearly spoken and informative. I've subscribed. *Link is in the video description.

[@GregVirgoe]

Thanks for listening to that, nice to know that it is getting airtime. ** Should I be saying or doing something different there with the links? **

[@Wishwader]

Greg Virgoe - Link in the description worked fine for me. Was just reminding others where to find the podcast.

[@topgroover]

Hi Greg, couldn’t help notice your fridge opens to left which I did with mine in almost same design setup. Found I couldn’t get the ice box/shelves out, so reversed door to open to the right where it opens fully to remove tray etc. Not ideal but works fine. Also not sure you needed top shelf above in case of gas leaks. As you say gas is heavier than air so would drop out anyway. Still one of the best conversions I’ve seen on KZbin mate. Great tips for novice builders. 👍

[@GregVirgoe]

I noticed exactly the same as you the ice box will not come out. But having to lean over the door every single day will get old real fast. It looks like the icebox door separates from the shelf so will try that way. Two screws and the whole fridge pulls right out for major cleaning jobs.

[@FernandoLaRocque]

Fantastic! You are the master of the wood!

[@GregVirgoe]

I'm still learning myself too I did make a couple of schoolboy errors but they end up on the cutting room floor :D

[@FernandoLaRocque]

Error is normal! Your project is Fantastic! Congratulations!

[@tonitrasport8092]

Complimenti , THE BEST!!!!! TONY FROM ITALY👍👍📐📏🔧🚙

[@GregVirgoe]

Thank you Tony :D

[@russellscott1151]

Great units Greg, loving the videos. Really fancy a brad nailer ! :)

[@davidm9643]

tip from a joiner use a school compass set to any width in seconds to transfer pencil line from any shape to the piece you want to cut, have used this method for 30 years

[@GregVirgoe]

That is a fantastic tip David, nice one! Just need one that doesn't close up on you like mine always does :D

[@miwei7898]

, excellent as always, I was getting set to pose the question when were to see the kitchen.

[@GregVirgoe]

Its like I can read your mind :D

[@gwydionball4114]

I posted before that I owed you beer for tips you have shared, make that multiple beers! Also its really nice to see you so relaxed now you've finished work - do hope you continue to have fun with the build and travels! #Van2??! (oh and I loved the blue grass back ground music!)

[@PaulDovener]

I can't wait for the big reveal and the full van tour. Great work, Greg

[@GregVirgoe]

Thanks Paul :D

[@dudeleboski2692]

Greg, I’ve met a chap who has coiled the copper pipe, behind the oven, with a 10 inch loop. This allows you to first connect the pipe to the oven, then push the oven unit back in for the permanent install.

[@GregVirgoe]

Dude Leboski yeah I have heard that too. It’s a pretty bad design flaw I think.

[@daviddionne8296]

Looking forward to your faucet selection.

[@GregVirgoe]

I have a couple of really neat ideas for this. I modified one tap to include a momentary pushbutton to initiate a small 12v pump for drinking water. My main tap also has a couple of very cool tricks up its sleeve

[@malteweinreich8755]

Wonderful work Greg Well done Mate :-)

[@GregVirgoe]

Thank you

[@More-Space-In-Ear]

It’s coming along brilliantly Greg, well done my friend..👍🏼..just love the bacon butty ready for me, I’ll be along very soon mate 😉😋😊

[@GregVirgoe]

Ha Ha, You can't beat em, sorry it's not going to be a vegan van. I wondered how many would notice and watch right to the end, kudos for sticking in there.

[@More-Space-In-Ear]

Greg Virgoe I’ve got the sauce all ready my friend...a cup of Yorkshire or PG tips tea??, I’ll bring the mugs and milk ☕️🥛👍🏼😊

[@greenthingone6271]

Wish I had the luxury of a work shop like yours Greg. All my work is outside and I can only hope it's not raining when I get time to work on my build, love the cupboard build.

[@GregVirgoe]

greenthing one most of our build was done outside on saw horses because materials to big for the workshop. You don’t need the workshop to build a great van.

[@greenthingone6271]

Greg Virgoe your right Greg, but having a shed/workshop and having the build project on my drive would be an advantage but my camper is on a outdoor storage site some distance away, so if I forget to bring a tool or materials it's back home to get it. Can be a bit frustrating at times, live and learn I say.

[@GregVirgoe]

greenthing one I do know what that’s like our van was 50mile round trip from where we were living so we could only work on it at weekend and that was when the weather was ok to open the van up. Hence why it took us 14months to build. 👍🏼😃

[@greenthingone6271]

Greg Virgoe I'm quite lucky at the moment as I can work on mine at the weekends with school being only 5 days a week due to the virus, but come September I'm back too just one day a month to work on mine, as school will be back to a 7 day week. So I need to up the stakes(weather depending) I've been doing mine since September last year and I've only just finished the insulation and the wiring. Next job is the side and roof panles from morland from your recommendation this weekend so looking forward to fitting them.

[@kevinchappell5837]

Nice work again Greg, the end reminds me of Wayne's World 2 and product placement ha ha ha.

[@GregVirgoe]

I've not seen that film, put them there so not so in your face.

[@nellbrown770]

wow its realy coming along now Greg. good idea for a fire door :))

[@GregVirgoe]

Fire door?? LOL funny

[@miwei7898]

Moreland should give you a little something for you driving people to the website. Apparently they know quality when they see it 😁

[@GregVirgoe]

Thank you very much for your kindness Mi

[@jimbotheassclown]

Another great video just waiting to see where you put the hot tub and pool table 🎱 .

[@GregVirgoe]

lol don't give me ideas Jimbo :D

[@woodworkpro7538]

you are awesome!!!

[@darrenplayer2091]

Hey Greg, great videos! we're at the start of our build and find your videos and tips very useful. I'm interested what sort of weights for all these cabinets and total overall for your van. Any video/s where you cover weights and tips for working within 3.5 ton? I have a LWB sprinter with about 1.2 to play with.

[@williamwhite9819]

Bamboo work top

[@kevindehinkelai7464]

Quality!

[@GregVirgoe]

Thanks

[@kevinbarnes7561]

Great videos

[@GregVirgoe]

Thank you

[@peterdorning8654]

Hi Greg thanks once again for the excellent video content you make it so easy. I have enjoyed all your channel content and have learnt alot. My wood working skills is improving and my tool collection is growing ( the bug has got me!) I am interested in getting an Air brad nailer & compressor could you let me know what you are using and any thoughts on this subjet please. In the meantime all the best to you and cant wait for the completed build "camper tour video".

[@BelindaTOV]

Youre so lucky, i have a drill and jigsaw to work with. Love the colors and think silver would look nice in there for paint for some bling. I have bamboo cutting board but it splinters too much

[@GregVirgoe]

The white is just an undercoat / primer sealer. They had two coats of satin black after this video was shot All now clad with the Zebrano furniture board same as the rest of the van. The router is my favourite tool you can do some much with them

[@BelindaTOV]

Greg Virgoe id be too scared to even buy a router...hahaha. i must keep saying your work is very nice. Thank you for sharing all of this with us. Some day ill do a video...super shy and not good with camera but i will.

[@bradhill508]

Liked it before I watched it.

[@GregVirgoe]

You're the man Brad!

[@tmotten]

Nice build as usual. Andn yes, the level of detail shown is encouraging. I particularly like the calmness and level of care you show. I'm a little surprised about the structure type. I'm doubtful that this type of structure will manage the mass at 20G which is what I believe the structural benchmark is for this stuff.

[@GregVirgoe]

The carcasses already are very strong, they are all screwed together and secured to the walls and floor. The end and side are over clad with 15mm furniture board, and it's all screwed to a solid wood countertop. Have you got further details for that standard you refer to?

[@tmotten]

@@GregVirgoe I haven't found a formal code but saw a reference about 20G being a norm. It's not a crazy figure on that in my mind. I struggle to accept that a wood frame would be able to withstand those loads. It seems the RV industry is largely unregulated so I believe it may be commercial fitout companies that are required to adhere to such a code. Lots of test vids on KZbin though and RV crash tests. Mostly in Germany and wood fitout doesn't seem to crash not. Did you see what I did there? ;-)

[@averagemonk]

Hi, Thanks for all the great videos! Did you instal a drop out vent for your oven and Truma combi or is that only required in you gas compartment?

[@willhopkins8176]

Great video as ever Greg! What type of pipe have used for the plumbing there?

[@DarrenPierson]

Greg, Many thanks for all the ideas a technical input. Many of the process you followed are going into our in flight van build. Watching the cabinet video made us think you lined the walls with 1/2' plywood? Did you kerf the back to get it to bend? For your Q&A requests: Please detail the sub-wall technique you used. TIA!

[@GregVirgoe]

Ply lining video out of archives and up tomorrow afternoon 3pm GMT

[@KS-wr8ub]

Top job Greg, starting to get used to it now! ;) You never looked at building a box fridge with a fridge? Seen it been used in a lot of sailing boats. Very energy efficient and can be reached if you hinge a part of the worktop.

[@GregVirgoe]

I did look at them as they do tend to be cheaper, for me personally I find having to dig around for stuff at the bottom is not very practical, despite its very good energy ratings.

[@steveoxley4374]

Hey Hreg another great video, any chance you could post your diagrams for building the kitchen, I’m looking at a similar oven to yours but don’t have the room to buy it and then build cabinets to fit, I have to to build first, being able to purchase oven and put it straight in would be a great help. Thanks.

[@anamaria-cx1bs]

Hi Greg, love your video, they very useful!!! I have a question.....why did you choose to buy that mini fridge? I checked and looks kind of expensive for a little fridge, any particular reason of your choice? Did you consider to buy a different one? Thanks a lot for your videos!!! Take care!

[@P4ulo1976]

Ooh! Is your worktop Bamboo mate? Loving your work as always!

[@GregVirgoe]

Spot on Paulo, nice one

[@paragon84]

Another awesome video, cheers!. Will you do a video going over the maintenance of the van, making sure the cooling system (hoses, water pump etc) are up to the task, and any other preventative measures you took before you set off?

[@GregVirgoe]

What a great idea, we have a spreadsheet of all the things you have to carry in your van to be legal in each country. Did you know you need spare glasses, breathalysers, spare bulbs, as well as the normal Hi Vis and triangles and first aid kit

[@paragon84]

Those extra legal things i would have overlooked for sure lol. The detail you put into your van is amazing. I'm a mechanic, and thats the sort of attention i'd give my running gear for such a long trip. Also giving a good week of driving locally as a shakedown test (even new parts can fail prematurely).

[@aaronfinandolakin]

I see a lot of people cut a small vent into the van behind where the fridge is going to be located to solve the air flow issue. They often tend to have their propane bottle (if hidden in a cupboard) within the same carcass so that the vent is dual purpose. Keep up the good work Greg (with all the detail), great finish in everything you've done and helped me loads.

[@zachmbutcher]

Check out a set of pots and pans by tefal called ingenio. They have flat lids and removable handles we can get the whole set in one drawer in our kitchen. having little storage space they’ve been brilliant.

[@GregVirgoe]

Great space saving idea they look fab, thanks

[@Robbrown92]

Hi Greg would you consider sharing your plans for the kitchen units also have you found that the 50l fridge is sufficient ?

[@icTeglas]

Hey Greg, great video, what is the measurement from your bed to the end of the kitchen, many thanks

[@valeriegriner5644]

These videos are AMAZING! It's my dream to do a van conversion one day...and I'm 61 y/o and a single female. Your plans and the explanations are VERY helpful. Thanks so much! Is there a video of a walk-thru of your van?(I'm not sure if it's completed yet).

[@GregVirgoe]

Thank you Valerie and I’m pleased you are finding them to be useful. The final VAN TOUR video has not been uploaded yet. There are a few build videos left to release first. Thanks for watching.

[@dukey6895]

Hiya Greg. Just thought I'd say that our van build would look nothing like it does without your videos. I can't tell you how grateful we are! Quick question regarding the fixing of your kitchen units - how are they attached to the floor? Was thinking of using the adjustable legs used in household kitchens otherwise.

[@GregVirgoe]

Jack Luker the caresses sir on the floor. So I took a short section of 2x2 timber. Screwed that’s to the floor then screwed the unit to it. The fridge unit is also screwed to the centre partition. They are all screwed to each other and all screwed to the wall and to the worktop. It does make a very strong set of cupboards when done.

[@csmallstar]

Can you do a walk threw of what you have done so far to show the progress as of now and what is left to do

[@ericglass952]

Thanks for another good and informative video with lots of helpful tips the details that other do not show like the scribe tool you made

[@GregVirgoe]

It was those details that were missing when I did my research initially. You can't learn much from a time-lapse at 500mph! Thank you

[@michaelseemann4305]

Superb as always, love the level of detail you put into the van and the way you describe how everything is done... nice idea btw with the red/blue for hot/cold water...

[@GregVirgoe]

it's made by John Guest, comes in loads of different colours, easy push fit fittings too www.johnguest.com/products/drinks-dispense-and-pure-water/lldpe-tubing/