Installing LPG in a Self Build Camper Van

Here is a detailed look at the current European Standards EN1949:2011+A1 for the specification and installation of LPG systems in a Self Build Camper Van.
What are the rules and standards for installing LPG in a self-build Mercedes Sprinter Camper Van Conversion?
You can get a copy fo the regulations fromthe BSI here-
shop.bsigroup.com/ProductDeta...
Here is a list of the parts discussed during this video
Digital Gas Manometer - rover.ebay.com/rover/1/710-53...
Rubber Hose for Gas Testing - rover.ebay.com/rover/1/710-53...
Gas Quality PTFE tape - rover.ebay.com/rover/1/710-53...
Gas Bottle Sealed Locker - rover.ebay.com/rover/1/710-53...
Gas Bottle Floor Bracket - rover.ebay.com/rover/1/710-53...
Gas Bottle Securing Straps - rover.ebay.com/rover/1/710-53...
Gaslow Refillable Cylinder Kit - rover.ebay.com/rover/1/710-53...
Gasit Refillable Cylinder Kit - rover.ebay.com/rover/1/710-53...
Disclosure - As an eBay Partner, I may be compensated if you make a purchase using the above affiliate link. Thank you for supporting our channel.
If you found this information to be useful and would like to make a donation to help towards further content you can do so by following this link www.paypal.me/gregvirgoe
Thank you very much for watching and supporting this channel
Please subscribe for the next video in this series. #gregvirgoe #vanlife #tinyhome

[@sampayne4978]

Pretty please Can you post a direct link to the exact manometer that you use as can't seem to find it via the ebay link that you've provided :). Thanks!

[@GregVirgoe]

Hi Sam, there's a bit of a story behind this, when I did my testing I had a leak but could not trace it, checked all my joints they were sound. Turned out to be the manometer and pump that was letting by so I had a brainwave, a blood pressure cuff!! It has a mercury gauge and pumps very accurate. So I brought one off eBay for £11 and cut the tubes used the gauge and the pump and it worked absolutely flawlessly, well happy with it. Here is the link rover.ebay.com/rover/1/710-53481-19255-0/1?ff3=4&toolid=11800&pub=5575265109&campid=5338027957&mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FNylon-Cuff-Blood-Pressure-Monitor-Stethoscope-Sphygmomanometer-Manual-BP-KIT%2F223145088865%3FssPageName%3DSTRK%253AMEBIDX%253AIT%26_trksid%3Dp2057872.m2749.l2649 150mbar = 112.5mm Hg (it's what the gauge reads in) I left mine on test all day and it never dropped one bit, well happy.

[@pa_maj.MARTINI-van-MAN]

@@GregVirgoe Excellent, Cheers.

[@patrickquigley3496]

@@GregVirgoe Greg you star, thank you.

[@CFMmotorsport]

Hi Greg, did you do the test with or without the truma connected? Just reading through instruction manual to install mine and on page 26 my understanding is that you’re supposed to disconnect the truma! Seems ridiculous to me as that’s the whole point of testing. Interested on your thoughts!?

[@GregVirgoe]

Nicholas Croydon-Fowler I tested through everything

[@Ballynoes]

I especially like the way Greg, gives his information freely, no trying to screw money out of you and no hidden agenda, there are not many of these people left... sadly.

[@GregVirgoe]

It's not about the money Ed, for once it's something that gives me a greater satisfaction and fulfilment. I really want to try and fill a huge void of missing information here and help as many self-builders as possible to get proper information. Building your own van is something that I think anybody can do with the right help and tools to achieve it. There's nothing more satisfying than helping someone else and seeing how your efforts have benefitted them and made them happy. I make a small amount of ad revenue and affiliate links which is great, it's more about the community.

[@Ballynoes]

And you do it with such professionalism too Greg. I have been researching my van build for months now, and like you say there is either an abundance of wrong or useless info out there, but not so much of the good stuff.... which is why I subscribed to your channel. Keep it up.

[@adventure40s]

Another bible for camper van converters. Having watched 100s of conversion videos I don’t recall many being compliant. Really useful information Greg, thank you.

[@GregVirgoe]

Thank you, there's nobody enforcing these standards so you can pretty much get away with what you want at the moment. But if you are building your own van would you not want to make it as safe as possible? I think it makes sense to follow the standards. Hope this video helps many others.

[@adventure40s]

@@GregVirgoe Totally agree Greg, BS/EN/ISOs will be based on best practice, so for the sake of self and public safely why not follow the Standard. Again thanks for sharing your research. Happy to donate £20 towards the cost of you acquiring and sharing the standard, if you have a page?

[@stephenmann7412]

The most crystal clear and informative explanation EVER ! Not only do I now understand the regulations, but also the reasons why. Thank you Sir !

[@gardenweld]

Greg, Big thank you for the time it's taken researching all the correct specifications, sharing with others in your usual precise way "This video will save lives" 👍 🚐

[@SpikeMoby]

This was one I've been waiting for. Far too many bodge installs on KZbin. Excellent as always Greg. Thank you.

[@GregVirgoe]

Thank you very much for the support and I hope that has given you lots of useful information.

[@dylzarox44]

Greg, long time watcher, first time commenter and mate this video has been absolutely fantastic to watch, the way you articulated the regulations was easy and simple to understand, thank you so much for your time and dedication put towards these videos.

[@alexsmedile]

I love your technical videos. You are probably the best van builder on KZbin for European Citizens.

[@jperzzon]

By far the most informative, inspirational van build series, I´m so thankfull for your hard work putting these together Greg :) Huge respect from Sweden, stay safe

[@GregVirgoe]

Joakim Persson that is hugely appreciated. Makes all the hard work so worth while. Best wishes Greg

[@davesamatvillagecabs8658]

Always a reliable source of information to come back to when needed. Many thanks Greg.

[@ARepublicIfYouCanKeepIt]

Once again, Greg's provided *the* definitive content on a DIY conversion topic. In this case, LPG. Thanks for sharing this fantastic detail on LPG in DIY conversions. The value you provide with your content is second to none. Very thorough. Wonderfully presented.

[@GregVirgoe]

Always a pleasure to read your comments John. Thank you for such nice feedback. 👍🏼😊

[@notsunkyet]

Thank you for the time you took to explain all of this very important safety information. You made a topic that could easily have been boring into a very educational and engaging video. You explained the physics behind the reasons why the rules are the way they are. Thank you!

[@GregVirgoe]

NotSunkYet I really wanted to get this one out there because I see so many installation that are just ticking time bombs. If it saves a few people it would be so worth the effort and cost. 👍🏼😊

[@karlbartelt3939]

Greg you've got my model Bus on your T-Shirt :) Thanks for such a detailed explaination, I'm alway horified when I see people using the gas heater inside their van, especially when they compain about the moisture without giving a second thought to how the Carbon Monoxied that is damaging their brains. I think this video will have a two fold effect, 1, it will make people do it right if they are DIY and 2, it will make people realise how spending the money to get a professional to do it it worth it. It was good to put in the sad story about the boat owner, and it reinforces the need for floor vents to take away any leaking gas. Live the dream and live it long, may your firm pipe work get all the attention it needs!

[@cliffp.8396]

Something I've not seen another Van Conversion DIY do is look up, study and apply the proper codes for Gas. These codes are written of experience/applied science and exist for the greater good. This presentation is professional and concise, what a great teaching tool. Thanks again

[@GregVirgoe]

Thanks for great feedback cliff

[@SundryGirl]

I agree with all the comments I like the way you are well-mannered and soft-spoken but also loud enough to hear and very thorough✨👍😃 cheers mate!

[@GregVirgoe]

That’s very nice of you, many thanks 😊

[@PaulAdshead]

Really appreciate all the effort and explanation here. I'm sure you've saved a few lives because of the video.Thank you!

[@paulrea1148]

Greg your an absolute legend! Your info series is excellent and exactly what I need for my upcoming van build, your my go to for van conversion info and I thank you, if I ever meet you I owe you a beer/coffee at least.

[@GregVirgoe]

Thanks I’ll look forward to it 🍻😃

[@capable_man]

Excellent video and information Greg. Like you I have found it difficult to obtain all the relevent info for installing LPG in a van. The info you provide is priceless. Thanks :)

[@nickvdW1958]

Thanks Greg, I have been watching all you van build videos - all are most excellent! Glad I watch this one!! My kitchen unit for our camper van came NEW with a hob and grill fitted with a gas hose attached. Having read the hob installation instructions for the hob it states do not use rubber hose. I won't name and shame the supplier but I will have a word with them. Best I remove the unit and fit some copper pipe!! Thanks again

[@the_beauty_around_us]

Thanks for your videos Greg! By far the best van build info on KZbin.

[@tmotten]

Your timing is impeccable. I'm not far from starting my propane build. Thanks for this vid. Great detail as always.

[@GregVirgoe]

Hope it will help you make a safe system for your van :D

[@waserbiker763]

As always Greg, your informational videos are brilliant. No nonsense and detailed. As someone else commented, your delivery on how you speak and deliver the information is extremely good. No Muss no fuss. No stupid music, just the facts. Nice one !

[@GregVirgoe]

waser biker thank you for such great feedback. It makes everything worth while to hear that. Really appreciated 👍🏼😊

[@dewialunedwards]

Have just bought a Gas it refillable LPG system and this video has helped alot, thanks

[@wingtsang2158]

Greg another thorough and succinct video very informative as per usual and to the point keep them up and when ever you do go travelling please keep up the videos and above all enjoy the ride and be safe will continue to follow!!!!

[@micklowe9924]

hi greg i am a lpg gas eng your video was spot on the only thing i would say is to take a look at the alde bubble tester this is fitted in line and all you have to do is press the red button and hold it down if there are bubbles in the see through part you have a leak you can test you gas as often as you like i fit a lot of them on boats. hope this helps

[@marcdewilde518]

Thanks for all the work and the expenses you saved us Greg! Excellent informative video as always. ATB - Marc- Belgium

[@nathanielthomas8110]

This is a brilliant video. I’m a gas engineer who hasn’t done much work on vans. I’m impressed.

[@johnmc9406]

One of the very best videos! I learned so much. Really appreciate the work you put into it! We all owe u a giant thank you!

[@normanmazlin6741]

Great presentation Greg. Thanks for your efforts. LPG installations can be SO dangerous. In Australia, we have a requirement that a gas drop vent is required under each gas appliance as well as in the storage box. Also that the main pipe run (rigid) is fitted outside vehicle and then T'd off through the floor at each individual appliance (ie no Ts inside vehicle). Also, and more importantly, the final requirement for road certification (ie ability to gain insurance cover) of a home-built canpervan is that the gas installation is approved by a qualified gas fitter, who then takes on the legal responsibility if there is an accident involving insurance issues. Same requirement for 240v installation, with a certified electrician. Doing the job is only half the battle, finding the tradesman willing to take the risk and sign off on your work can be difficult.

[@lolacolt5020]

Thanks once again Greg for the great video and taking the time to make all this information clear and accessible to everyone! 👍🏻👍🏻

[@GregVirgoe]

You’re welcome, thanks for watching

[@diederickverweij]

Thanks for explaining all the requirements Greg! This is exactly what I needed to know!

[@jeepster2496]

Once again a brilliant video, your 100%, safety is paramount, cheers Greg

[@GregVirgoe]

Thank you for your support

[@dekka2664]

Thanks for sharing, I was literally about to install everything wrong until I came across your guidance. Just waiting for right parts to arrive now 👍🏼

[@GregVirgoe]

Dekka I’m really pleased you found my video there is a lot of miss information out there especially on gas. Best wishes with your build

[@GregVirgoe]

@@chatteyj at each location where there is potential for a leak. I have one under my cooker

[@kevgermany]

Greg, this series has helped me a huge amount. I ended up with an external tank installed under the tail because of German regs. Must say I struggled to get close to the neatness of your installation. Hat off to you. If I may, some comments on LPG for Germany based on my experiences. Hope it helps others as yours have. 1 - The system you have with Gaslow us not yet clearly approved, falls into a grey area and is currently being reviewed. Similar systems using Truma dual control are also affected. Issue is that although the controls are approved, tanks are approved, you're not allowed to use flexible pipes to connect fixed gas tanks. Oddly, you can fit dual removable tanks in a gas locker connected with flexible hoses and your Gaslow switch overs. 2 My impression is that steel piping is most often used, not copper. I ended up using steel. It's very hard work to bend. Even with a bender like the one you used. The compression fittings need a lot more tightening than copper and what I thought was tight, certainly a lot tighter than you needed on copper, leaked. 3 It's a requirement to get the system inspected and certified by a qualified body. This is usually a local caravan/camper place. Must be repeated for each Tüv - MOT equivalent. Tanks must be certified every 10 years. 4 There are labelling requirements as well. 5 Doing it yourself is quite straightforward as you've shown, many caravan centres are used to self builds and willing to advise, but not all. 6 Using the combi heater while you're driving is legal and safe, so long as a crash cut off is properly installed. I don't intend to do this, but had one installed for extra safety. 7 You must only run one appliance off a single 8mm pipe. Couldn't make out if this was a legal or practical requirement. 10mm pipe is only allowed up to a manifold. So I have 10mm to the electric shut off like yours, a very short 8mm connection to a manifold, separate feeds without T pieces to each appliance. Manifold has taps to shut off supply to individual appliances. 8 Main German fittings maker seems to be GOK. They have a really useful brochure detailing layouts, the supply components which is really helpful. 'Lösungen für Flüssiggas in Freizeitfahrzeugen' 9 For users of refillable bottles with German threads, adapters are available so they can be refilled in countries which don't use the German fittings.

[@tom_shooter]

This is so so good Greg, so informative and presented in a relaxed manner. Love.it!

[@FalloutBreakbeat]

This is a great video. I've done everything myself with my own initiative, but gas safety is where I draw the line. This has told me everything I need to know. Thank you.

[@GregVirgoe]

I’m really pleased it has helped you. Thank you for leaving a message 👍🏼😊

[@derekt7606]

Think of this Greg. Your great video and explanation may one day save someone from serious harm or worse. You are a top guy.

[@GregVirgoe]

I really do hope it helps a lot of self-builders be more aware and much safer in their own mobile homes :D Thank you Derek , very much appreciated.

[@vovachkanikolsky3092]

Thank you so much for this very important information! I am designing a van build and I have been quite shocked at how many people let their propane tanks roll around in a drawer in their van’s living space.

[@GregVirgoe]

It is shocking the potential danger this can cause. If I built another I would put the gas tank underneath.

[@johnvickers5750]

Well it seems me being a retired senior process/quality engineer in the automotive & construction industry has it's benefits after all 😉 Thanks once again Greg for the superb information👍

[@markpritchard3707]

I’m doing my sprinter this year, I’ve been YouTubing the subject now for two months gaining as much knowledge as possible and Greg makes everyone else here look like amateurs 😂, what a wealth of information, fantastiq

[@mikewiscombe5582]

Thanks Greg for yet another fact filled video. My van build will benefit from this.

[@GregVirgoe]

I'm really pleased it has some useful stuff in there for you.

[@LloydEdmondson]

Another great video thanks Greg! I am just about to install my under mount tank and your advice will be invaluable cheers.

[@mr.phasfun6044]

CONGRATULATIONS..,.,.,you explained these regulations like a true pro.,i dont have qualifications for install or testing lpg but am a NG commercial/domestic engineer and i know how hard it is to understand and constantly sit exams to keep my licences updated...i learned so much from your explanation of bsi/en regs..they can be so confusing.......your attention to detail is what made your install SAFE and you had confidence if any thing were to happen such as RTA...where emergency services have to deal with the cylinder etc,,,,,,

[@GregVirgoe]

Thank you very much for your positive feedback it is really appreciated 👍🏼😃

[@alfypierri8022]

Fantastic video on LPG. Hope you will be uploading more.

[@MrDavidOliveira]

Hi Greg. I’ve to tell you... I really like your videos. You make a great job full with information. Thank you.

[@GregVirgoe]

David Oliveira thank you for a great comment. Cheers

[@simonbradford3422]

Greg Absolutely brilliant presentations as are all of your videos thank you

[@sunnycampers4249]

Another informative, well presented vid Greg, thank you. It's also appreciate with you taking the time to read though EN1949. My thoughts are that with electric it bites and more often than not, you get a second chance, however when you smell gas, it can kill you and others nearby. I've a LPG Tester advising me and you're so on the mark with your comments.

[@GregVirgoe]

Sunnycampers I really do appreciate your comment. It’s so important for people doing self builds to make sure their installations are safe. Not only for themselves but also those camped around them. Thank you 😊

[@stevenwilliams9997]

Legend!! These videos are fantastic, really informative. Thanks a million Greg!!

[@maxgusatz5644]

Is there a nicer guy on the whole of YT?? Love your stuff Greg. 😉👍👌

[@GregVirgoe]

Really appreciate that 👍🏼😃🙏🏼

[@horstszibulski19]

Thx for these informations, I saw some really unsafe installations some days ago...recommended your vid to them, hope that they will watch this here and didn`t blow their vans up... :-) Have fun!

[@GregVirgoe]

Thank you for sharing this information and hopefully, that will help those guys make their vans more safe

[@donjones3355]

Another excellent video Greg! Stay safe! Thanks!

[@GregVirgoe]

You too Don, Many thanks

[@stefanoghiotto8019]

Thank you very much mr Greg for this and the other videos...i found them wonderfull done and i love them the doble because you simes a realy clevered and kind person 👍👍👍❤😊

[@RS-bt7gx]

Excellent video, really helpful as i have just started my van conversion. Thank you

[@sharonoddlyenough]

Thanks from a curious RV technician in Canada. By the way, this confirmed the suspicions I had watching some european van conversion videos and thinking that the gas intallations were wrong.

[@GregVirgoe]

I’m pleased you liked it 👍🏼😃

[@benshakespeare2963]

Fantastically informative again, Greg. Thanks for sharing.

[@mr.h5436]

Enjoy the learning from your videos. Answer to questions I didn't know I had.

[@mrzaboor]

Knowledge + skills = Greg. Thanks for your videos.

[@GregVirgoe]

Thank you for the compliment. Glad you like them

[@adammacguire93]

Great video, loads of useful information! Kudos and thanks a lot for uploading. Subscribed.

[@previouslyachimp]

Brilliant advice as always Greg, shamefully I have previously used PTFE tape on compression joints (water only), so thanks for the correction!

[@previouslyachimp]

Haha, certainly no offence taken, and to be honest I think it's probably perfectly accurate, given that I'm sure I saw a plumber do it somewhere, and simply copied as you said. Though I'm not actually building a van conversion presently (maybe one day!), I still think your videos are invaluable. Your diligence and professionalism is clearly evident. I hope that you feel sufficiently rewarded for your efforts, either in terms of simple gratitude, but hopefully a bit of cash from KZbin also. If you continue to present videos in the manner that you have so far, I have no doubt that your following will grow exponentially. Good luck Greg, and many thanks for your work and your comment. Take care.

[@TheDickPuller]

Thanks Greg, excellent information as always. As a Gas Safe Engineer with LPG qualifications can I please add, while you correctly stated it can be a DIY installation, I’d strongly recommend you employ the services of a competent Gas Engineer, with the relevant Gas Safe qualifications. Get them in a the right time & it’s not a time consuming or expensive job, but a safe one. I believe any Insurance Company will look for a Safety Certificate for the Gas installation & it makes common sense to have an annual check. Cheers Greg, I love your attention to detail & thanks for taking the time👍

[@GregVirgoe]

I agree that it should always be checked, tested and certified by a qualified engineer

[@pauljones8774]

God I love you man.........lol It's very clear from all your videos, how passionate you are about things you get into and how lovely you are sharing your vast knowledge and experience with everyone...... Good on you Greg and thank you from me who may convert and those that will, after you showing how it can be done ... Paul

[@GregVirgoe]

It's comments like this that make all the hours of research filming and late night editing worthwhile. Really appreciated Paul, thank you.

[@graceygrumble]

My father was an engineer and a great handyman, like yourself. He would set his hand to anything and everything, but he wouldn't touch gas. So, there's no way I'd give it a go, despite your excellent explanation once again, Greg. I'll know what to look for, when I'm checking what the gas fitter is doing, though. ;)

[@GregVirgoe]

At the end of the day, you have to tackle what jobs you feel comfortable with. At least you now know if the guy's doing the right job or not :D

[@leestewart4064]

Quite simply a brilliant video Greg and very informative

[@anthonygreenway7537]

thanks for all the advice, makes a the dream a possibility

[@sebxj25vm]

Very detailed and extremely useful. Thank you Greg!

[@GregVirgoe]

Seb Arcus you are welcome. Thanks for watching 😃

[@jasonedwards7831]

So professional, really appreciate the info. Well done.

[@WoollyWanderers]

4:18 when he said "there will be a test..." I thought he was going to continue "...at the end of this lesson so make sure you pay attention". I went white as a sheet, took me back to my schooldays!

[@kopeducati]

Hi there Greg ! chose to go electric + diesel heating so I can skip Gas altogether... plus I can put it under the van... winning some room... and weight ( I hope ) ! as usual : all respect for your thoroughness! top job!

[@pulsey2001]

Dam it! This Vlog convinced me to keep my log burner. Gas seems so dangerous; the missus had a bottom burb halfway through this, I jumped out of the van into the fresh air.

[@bexnut]

Brilliant information explained clearly and concisely as always Greg. One caveat to this is that (after extensive conversations with Truma), it is perfectly fine to install a (specifically) Truma flue underneath or within 300mm of an opening window (not door) providing a Truma window switch has been installed. This detects a broken seal when said window is opened at automatically shuts the boiler off to prevent any exhaust gas re-entering the vehicle. There may be an equivalent available for other manufacturers but that's for one's own research!

[@GregVirgoe]

Absolutely correct. I guess when you have the window open you wouldn’t need the heating on but may want some hot water. Better to be safe than sorry.

[@reecebosher8971]

Exceptional information. Clear and concise

[@fredbluecat6045]

A very interesting and informative video Greg, thank you.

[@RoyBlumenthal]

Excellent distillation of a complex system. Good work. Thanks.

[@GregVirgoe]

You are most welcome, thanks

[@Macktheknife11]

Excellent video as always Greg, very useful. Thanks.

[@GregVirgoe]

Pleased it has helped you

[@Nordkapp65]

Hi Greg, I do think with your skills and knowledge you could easily make a business for yourself in van fitouts, however they are a labour of love ! Very useful information indeed, I was going to fit a cooker inside a studio and the bottled gas inside. Me thinks that will definitely go outside and have a run of copper to the inside to the cooker.

[@GregVirgoe]

That sounds like a very wise move, make sure you have the bottles in a locked cage or small locked shed with vents at high and low level, means of local isolation and the appropriate warning signs fitted. Thanks for watching

[@andrewpeak1124]

Well done Greg. Crystal clear👍

[@Ballynoes]

Sad... I clicked like before I even watched it.. but I knew it would be another good one from Greg.

[@GregVirgoe]

Thank you Edwin, really great to have your regular support

[@cheekybadger84]

Me too, Edwin!

[@AcheForWake]

I always do this with Greg’s videos

[@spencerabaker]

Yup, I do the same!...and I thought it was just me, lol

[@iansummers9767]

Very good and important information. Thank you Greg.

[@GregVirgoe]

You are welcome Ian

[@johnsweeney2099]

Well amongst the best on line , very informative 🙏

[@GregVirgoe]

I really do appreciate your feedback thank you 😊👍🏼

[@dspicer1773]

Excellent video Greg, thank you for sharing

[@beths9232]

This is great Greg! I think I'll stick with electric cooktop for inside the van and use a camp stove on a picnic table when appropriate.

[@kellymelrose8527]

ive learnt a lot from this video ..thanks Greg

[@nikolayatanasov5791]

Thank you Greg! So concise and clear!

[@GregVirgoe]

Thank you very much

[@interestpart260]

Fantastic informative video, Thanks so much for the detail 👍

[@mikewheldon2440]

Great Information, thank you,I have a guy coming tomorrow to test my work and hopefully get a certificate. Mike W

[@MITMASA]

You Sir are awesome. Detailed explanation and great build, can't wait to see the final product. Keep up the good work. Cheers from Portugal. PS: First xD

[@GregVirgoe]

Thank you Daniel, I’m really looking forward to the final van tour video. To be honest it’s turned out better than even I expected from a home build

[@MITMASA]

It's superb, I wish one day I'm able to do half of what you have done. It is really good work, I have been watching since you were 3 episodes in and never stopped since!

[@snoman1999]

LPG💨 Smashed it again Greg 👍🏼

[@GregVirgoe]

Cheers Ian

[@manuelrossi5187]

Thank you for sharing your knowledge. This is much appreciate! :)

[@GregVirgoe]

You are most welcome 🙏🏼

[@rossadamson4664]

Fantastic video, super thorough as usual! Really useful thanks.

[@GregVirgoe]

My pleasure Ross, hope it is useful to you.

[@rossadamson4664]

@@GregVirgoe cheers Greg it certainly will be as I'll be basing my MWB Sprinter conversion on most of your videos!

[@diotimasson2882]

Great communication skills. Beautiful.

[@GregVirgoe]

Thank you 🙏🏼

[@More-Space-In-Ear]

Brilliant in-depth video Greg, well done my friend....you can’t cut corners when gas is around...

[@GregVirgoe]

My thoughts entirely Marc and why this video is essential I think.

[@More-Space-In-Ear]

Greg Virgoe I cant agree more mate.....I’ve seen boats blow up because of unqualified installation....not nice seeing the results floating in the water 😔

[@sampayne6318]

A bloody marvellous video. I would just like to point out that if you are a university student or alumni then your university likely has access to the British Standards so you'll be able to get hold of them for free rather than paying the extortionate amount that Greg probably had to pay!

[@graham_ozzy]

What a great informative video very well put together well done 👍

[@GregVirgoe]

I’m glad you liked it 👍🏼😃

[@JimsRobot]

Brilliant! I'd like to see you doing the joints, install etc. Thanks.

[@GregVirgoe]

Please watch my previous Truma heater installation video, I'm installing the gas pipe to the boiler. kzbin.info/www/bejne/sHTNqpqrZd6agac I also will have a further video coming out on the gas cylinder due for release very soon.

[@csp3552]

Excellent information. Thank you

[@drQ11235]

Absolutely love this, thanks so much!

[@kevgermany]

Really informative and useful. Thanks a bunch!

[@GregVirgoe]

kevgermany you are welcome my friend.

[@jakechapman6169]

Excellent video. Thanks, mate.

[@andrewhudson2853]

Brilliant video Greg these really are a god send knowing someone is giving you good information. I wondered how you made the connection to the regulator for pressure testing as most/mine have a GOK fitting on them.

[@GregVirgoe]

I think I show my testing in the gas installation video 😃

[@hedleypepper1838]

Once again great information gregg ... thank you

[@GregVirgoe]

You are most welcome 🙏🏼