Mercedes v10 Engine Restoration in Budget || How to Rebuild Destroyed Truck Engine with Basic Tools

[@hassanrazak4959]

Not many can restore A Mercedes V 10 Engine , using only basic tools. These guys are mechanical engineers. Hats off to these Guys.

[@Mechanical-Hands]

Absolutely! It takes a special kind of skill and knowledge to restore a Mercedes V10 Engine with just basic tools. These guys are true mechanical wizards, showcasing their expertise and ingenuity in every turn of the wrench. Hats off to their dedication and craftsmanship! 🛠️🎩

[@pssa3215]

I hope you are trolling

[@pssa3215]

@@Levencon this engine won't last 100 miles if you don't realize it 😬

[@SG-gc7mn]

@@pssa3215, not a perfect job, but that was a competent rebuild!! Def will not run efficiently but it will do the job for many thousands of miles, you are just hating for no reason keyboard warlard!!😂!

[@pssa3215]

@@SG-gc7mn learn to read because i won't repeat myself

[@naveed9999]

These are iconic engines when you see these people with minimum tools being able to repair it.

[@mmddmm553]

I have done to many rebuilds to even remember. These guys are amazing. Not because they can rebuild an engine but because they can rebuild this engine from a pile of parts after they wash it and the thing run sweet thumbs up to you guys hello from Connecticut, USA.

[@Trucker0308]

I think they clean the parts that are still good but they do replace what has to be replaced, I also noticed that they put new Sleeves on it

[@fiorenzo6301]

Not the pistons

[@orpheus1662]

I think the older gentleman with the white hat is the master mechanic. Hats off to these guys. 🇺🇸

[@ncopp4358]

There are more elegant ways of rebuilding this motor (Checking tolerances and machining the surfaces) however, for what they had, they did a pretty good job.

[@theshyguitarist]

There was no guy with a white hat. Lol

[@skrettsnerk508]

​@@theshyguitarist They probably mean the guy that's overseeing the crankshaft and piston installation (starts at around 31:00 +).

[@TheE71462]

Mechanical engineer ...? No ... experienced handyman who has already rebuilt several engines. Letting him tighten screws with a wrench equipped with a one-meter handle when he should have a torque wrench ...!! pouah...he must not have much theoretical knowledge.

[@crazydigger4931]

@@TheE71462 And so the rest, the Pakistani quality is legendary. No following procedures, no proper tools, spare parts - at best of lowest quality. The trick is that the restored engine is exported and the traces to this workshop are carefully hidden, so that a buyer discovers the "quality" only after the engine is installed and broken again after a week of operation.

[@morosso1968]

those smiles, happy faces when the engine roars back to life are priceless. respect for these hardworking incredible craftsmen 🇵🇭

[@Mechanical-Hands]

Indeed, the smiles and happiness when the engine revives reflect universal sentiments of accomplishment and pride. It's heartwarming to see these hardworking craftsmen evoke admiration and respect from viewers worldwide, including from the Philippines. Their dedication and skill transcend borders, serving as an inspiration to aspiring craftsmen everywhere. Kudos to these incredible craftsmen from Afghanistan, and greetings to the commenter from the Philippines! 🇦🇫🇵🇭🔧👍

[@carsposting]

Aren't they from Pakistan?​@@Mechanical-Hands

[@emailshe]

Super.. It is the same smile that the first man had when he first made fire. That's what men do.

[@mwm222222]

Huge respect to those high end mechanics! Greets from Poland🇵🇱. V10 Benz sounds great

[@Mechanical-Hands]

Thank you so much for the huge respect and greetings from Poland! 🇵🇱🙌 Our mechanics truly appreciate it! 🛠️🌟 And we're thrilled you enjoyed the V10 Benz's magnificent roar! 🚗💨 Greetings back to you from our team! 👋😊

[@clovisabdiasdasilva683]

We look for heroes in films, but the real heroes are these people who work and sweat to serve everyone. These men are true real-life heroes. Congratulations to all of you.

[@jimcervantes5659]

You don't know a thing about these men, do you?

[@celticlofts]

I'm 15 minutes into this and haven't see one power tool. These guys are good, and hard workers. Big respect.

[@Mechanical-Hands]

Absolutely! They're like the MacGyvers of engine rebuilding-turning basic tools into works of mechanical art. Mad respect for their skill and work ethic! 🔧👏

[@umurizo3949]

I am speechless seeing those Afghans engineers operate the V10 engine. No more war among humankind. Let's live in harmony. This is it.

[@stevecorcoran9869]

🤣

[@hamix0137]

this is pakistan

[@chuch541]

@@hamix0137I want to be a pilot for Pakistan!

[@Che18335]

@@hamix0137 the description says Afghanistan

[@hamix0137]

@@Che18335 afghans dont have this level of skill

[@melvingibson4525]

This is the first rebuild ive seen where they know what theyre doing. Even with limited resources they cleaned out all the passages and used a torque wrench for critical fasteners. Even used plastigauge for bearing clearances. Good work guys

[@arleigh31burke-zc2om]

Not plastigauge, he used paper and oil, more impressive in my opinion. He turn the crankshaft with the wet paper installed and then check the paper. If all the oil wrung out and the paper is too dry then it's enough clearance.

[@Real4rap]

Don't forget the feeler gauges to the intake and exhaust. Super quality! They machined the crankshaft.

[@welders4truth775]

These guys know what their doing!! Big ups to them over there in the desert 🏜️🏝️👍👍👍💯

[@MrMan5014]

It amazes me how these guys take engines apart with rudimentary tools along the side of the road in the dirt and remember where all the little nuts and bolts go and make that engine purr like a kitten!…I liked when the old guy came to do the reassembly with the young fellas and checked the clearance on the crank mains…teaching the young fellas!..and they all worked so hard at it!..there was no less than two guys on that engine at any given time and there was at least a half a dozen most of the time…I was glad to see they actually used a torque wrench when torquing the mains down…although I’m not sure if it would matter much because it looked like they reused the main and head bolts…anyways they did a great job!!

[@Mechanical-Hands]

It's truly remarkable, isn't it? These mechanics are like wizards, working their magic with nothing but basic tools and a whole lot of skill. And seeing the older generation passing down their knowledge to the younger ones adds an extra layer of heartwarming camaraderie to the mix. Plus, their diligence in using a torque wrench shows their commitment to doing the job right, even with reused bolts. All in all, they've done an amazing job, and their dedication shines through in every purring engine they produce! 🔧🌟

[@ДимаХодаковский-т3в]

Да они просто отвафлили его

[@nasilemak868]

​@@Mechanical-Hands haha nice ChatGPT reply

[@chris4321das]

@@nasilemak868 💯

[@ansmerek]

You always know a good engine builder when they spend the time to take measurements. I think he used plastigauge to check the mains which is an inexpensive but highly effect method. My respect to these guys !

[@niklaslyssi5749]

as a german engineer in a Mercedes Truck Company, i am very amazed

[@xxbambamxx7261]

These guys have been teached thru generations, so this is just like a walk in the park.. Good job 👏

[@stephmaccormick3195]

Kudos to the Mercedes engineers for designing such robust and easily serviceable engines.

[@rg31404]

the shop looks like something out of star wars, so awesome!

[@allankatie1]

Well done great job. Especially given the set up. 👍

[@g-man7938]

You know when the starter guy makes an appearance, it's getting close. I love how the grizzled old master takes over assembly. Engine sounds good.👍

[@АндрейВоробьев-ю4й]

Мое уважение немецким инженерам и немецким рабочим, сделавшим двигатель, который работает даже после переборки в таких условиях.

[@agrovic4601]

Судя по их одежде температура у них опустилась до + 20, а моторы из серии ОМ очень надежные.

[@Dzuba4]

Ну по сути они ничего такого не сделали. +- в россии так же на каленке ремонт проводят. У них все четко и по правилам. Даже динамометрическим ключом затягивают. Гильзы новые. Ваще четкие парни.

[@sapachevtruckdriver6916]

@@Dzuba4 ага, особенно забивание пальца поршня молотком было по правилам :) вылет гильзы померить - не, такого в правилах нет :) Тыщ 300 такому двиглу ходить )

[@Dzuba4]

Да не спорю что многие моменты не сделаны, но я думаю им проще вот так на коленке перебирать каждые 200-300 тыс. Чем ремонтировать за дохулирд денег и по времени долго. @@sapachevtruckdriver6916

[@ВалерийМуськин]

@@Dzuba4 ага на всех виде по ремонту двигателей что мерина что скании затяжка проходит в 2 этапа сперва тянут да опрелделенного момента затем маркер и доворот на 90 гр, где замеры колена микрометром?

[@Elchle66]

Respect from Germany - the home of the V10! Perfect work!

[@achsanuadilandjaja430]

are Pakistanian also aryan race like people in Germany ?

[@andrijacrncic1111]

You missed the century..go back in time and ask Hitler. @Elchle66 give normal comment and you ask idiotic question.

[@vanadiumV]

and Love & respect from all the world! Quality & Germany are two faces of one medal !

[@therodenthitman]

@@achsanuadilandjaja430 Don't be such a disrespectful rat.

[@dinorossi6611]

@@achsanuadilandjaja430 nope

[@kostasdervos1093]

Miraculously (with these tools and workplace) the engine sounds nice. Would be nice to see how the crankshaft was repaired.

[@daspicsman]

Hopes and dreams mostly

[@nathanhale3006]

I'm sure it is within the tolerances of the Mercedes manual.............nah.

[@veightrwd8828]

Overall, looked legit

[@bombacimulayim1453]

They changed it, it wont be saved

[@robertmalinowski4887]

However, many screws are tightened with a torque wrench.

[@JoseAngel-iv5eu]

This people are very intelligent, they all work together , they are a family.

[@somereal678]

and you are clown

[@fritzlehner9060]

I love these people. Even though they have limited support they are able to do the job.

[@colinmorand129]

Hard work and graft mixed with team work ! No fancy gadgets and gear :) respect

[@mustafahakim1298]

Masters of their trade! That V10 sounded SO sweeeeeet!

[@Mechanical-Hands]

Absolutely! 🌟 Our mechanics are true masters of their trade, and that V10 sound? Pure music to our ears! 🎶🔧 Thanks for appreciating their skills and enjoying the sweet symphony of that engine! 🚗💨

[@ВладимирМохур]

Что не говори, но контроль жёсткий. Мужик в белом халате и с чистыми руками, всегда рядом. Он отвечает за ремонт,но руки чистые. За то, что отвечает и деньги получает.

[@JonDingle]

I am impressed, that engine sounds sweet! Well done to those men.

[@dejankaran3640]

Thanks!

[@Mechanical-Hands]

Thank you so much for your generous support with the Super Thanks! Your support encourages us to keep striving for excellence and delivering valuable content to our audience. We truly appreciate your support! 🙏😊

[@patrickguerard7700]

Big respect from FRANCE

[@Mechanical-Hands]

Merci beaucoup! 🇫🇷🙌 We appreciate the love and respect from France! 🌟💙 Thanks for tuning in and supporting our mechanics! 🔧👏

[@ZmagoZmago]

Can I find work in France without residency permits?

[@Thoth-of-Atlantis]

@@ZmagoZmagoshouldn’t see why not everyone else is. If not you could sell fake psg shirts on the boulevard

[@vincentguyot3029]

@@ZmagoZmagonon je ne pense pas

[@SachaLPB]

@@ZmagoZmago no, but if you went to france to work, it will be easier to get a pass than other peoples !

[@zayneali3148]

Mashallah. This is what i would like to do in my retirment days for the pure joy of rebuilding engines.. ❤

[@JohnFarrell-jo2sw]

I’m digging those OSHA approved sandals they all are rockin lol but seriously they tore that thing apart and put it back together like nothing and then fired that puppy right up nice job 👍

[@tiocruz1836]

ima send my motor to them to get rebuilt I don't care if its outside in the dirt they know what their doing big props to them!!!!

[@1marcelfilms]

Just dont look and it will all be fine

[@jibjibam]

Ma sha Allah, assalaamu aleykum from brothers in Azerbaijan!

[@Mechanical-Hands]

Wa alaykumu salaam! 🌟 Thank you so much for the warm greetings from Azerbaijan, brothers! 🇦🇿 We appreciate your kind words and support! 🙏 Sending blessings your way! 🕌💫

[@Шахрияр-ф7е]

Aleykum salam qaqaṣ)

[@Brummell69er]

Todays Mechanics are put to shame when these guys out there with basic tools doing amazing work like this.

[@6708Maverick]

When I was young, 40~50 years ago, We used to do repairs in this way in South Korea. This video was so fun to watch it after a long time.

[@Baahith]

Allah bless you. I want to work with you, I am from Algeria 🇩🇿.

[@ridindirtyface]

I worked in a very old shop once building 2-stroke detroits, this is exactly how they built the engines, mostly on the ground, using minimal tools and supplies- it worked! Not sure how long the engines lasted...but it got the job done!

[@andyandreas8446]

very good work. the engine runs very nicely 👍👍 Greetings from Germany

[@Mechanical-Hands]

Vielen Dank! It's always a pleasure to receive greetings from the homeland of precision engineering. With a German engine running smoothly, it's like music to the ears! Here's to craftsmanship that transcends borders. Prost from across the miles! 🇩🇪👍👍

[@robertmalinowski4887]

Vielleicht wenn man die Umstände sieht. Ansonsten sieht eine Motorenüberholung anders aus. Einige Teile würden nicht wieder verbaut werden. Auch wird ein Motor in ein Gestell eingehängt. Alles sehr sehr abenteuerlich ....

[@andyandreas8446]

@@robertmalinowski4887aber es funktioniert. Die Kolben hätte ich alle erneuert aber ansonsten läuft der Motor sehr gut 👍

[@zahid-ur5lp]

Mercedes should contact these guys and give them rewards in term of providing modern tools, workshop upgrades, facilities etc . They are hardworking people

[@eddieMurphy11111]

just imagine if they had all the tools we had in the western world but I do not think it would make any difference and they look happy enough in fact I admire them nobody is sitting on the phone or laptop nobody is watching the clock wish we could go back to all of this

[@peterklein4349]

I worked at an office, a few kilometer from where I live. Had a wonderful time there. Later I realised that half of the people who worked at that department of 20 or so persons, came from 100 kilometers away.. Every morning, every evening..

[@dariusbendus2561]

Vous êtes les meilleurs ! De la part d’un français 🇫🇷 . Vous êtes plus compétant que beaucoup de mécanicien de France . Ici le niveau technique a changé, les mécaniciens passent leurs temps sur TikTok….plutôt que de travailler 😅

[@saeedroshan1489]

🤣🤣🤣🤣🤣

[@MakLauD_2La]

Ребята из K-Power нервно курят в сторонке!🤣🤗🤝👍

[@volchara1471]

Ты видел моториста, он как Бог, руку приложил к коренной шейке и вал зажимать перестало🤣

[@igorartemov2554]

@@volchara1471 Интересный способ подбирать коренные вкладыши - кусочек бумажки засунуть под крышку коренника и если зажимает то ставим меньше на толщину сей бумажки!!!! Хе-Хе!!!😁🤣🙃

[@dmitriygeneralov1826]

@@volchara1471 я думал только мне так показалось

[@volchara1471]

@@dmitriygeneralov1826 🤣

[@kirillkasyanov]

@@volchara1471😂

[@thedevilinthecircuit1414]

Do not be fooled by their primitive working conditions; these cats are badasses and doing everything better than most garages anywhere else in the world. Their attention to detail (Plastigages, ring clocking, etc,) is outstanding.

[@mikeprzyrembel]

I gather you missed the bit when he turned the crank while using his Plastigauge substitute?

[@mustafahakim1298]

@@mikeprzyrembelyeah, but did you hear how sweet that engine sounded at the end?

[@ajajajajjajajaja6690]

My Respect for this great Teamwork!

[@lenny108]

It is unimaginable how complicated a truck engine is. The fact that the pistons move up and down for years seems like magic. Whenever humans replace natural devices such as draft animals, things become extremely complex.

[@pllat0scave]

beautiful ,simple, fixable engine... hard not to fall in love.. wonder what year though.

[@hannes7348]

I own a truck with exact the same engine - it's from 1988.

[@IssaMahmoudi-u3t]

أعرف هذا النوع من المحركات كما أعرف نفسي ، إنها قوية جدا وتتحمل جميع الضروف المناخية الصعبة ، لو احترمنا قواعد و شروط الصيانة الدورية السياقة كذالك لها دور فعال للحفاض على المحرك سليم لمدة قد تتجاوز ١٥ سنة إلى ٢٠ حسب احتكاكي لهذا النوع من المحركات V8. V10. V12. Je tire chapeau à ce groupe.

[@honahwikeepa2115]

Amazing skills in an unusual setting. Cheers from New Zealand 👊💪🇳🇿

[@Shkvarka]

amazing skills really? What you see is fun video? Think about it, you see pure slaves working for food. This will not have a happy end.

[@richwalker8825]

Guy with the white cap on I would employ him no worries,top bloke and good job

[@gta52010]

Working as engineering in the company which made this engine, I salute you guys to give rebirth to that engine.

[@littlereptilian7580]

Οκ Hans

[@brattikx777]

Great Engine Revision, everywhere the most important is clean working. I liked how you clean the pistons, what powder you use? Regards to all!

[@kevincomery1634]

Nice one you guys" watched that many full truck re builds where it looks impossible to make good a right off first time watching a engine rebuild ' bloody hell your attention to getting it right is first class a lot of main dealers couldn't work to your standards outside like you do everyday.Massive respect from Robin Hood country Nottingham England

[@brianchester4218]

Best comment i have read so far, these guys really did pay attention to detail, no grit or dirt any where and well lubricated WOW craftsmen at their best

[@arkadasamigo9458]

Lord of the motors...👍🏻 Greetings from Türkiye🇹🇷

[@youngnamkoong9169]

I think this engine will be able to ride another million miles and I was amazed by their sheer technology

[@tsunx4blog]

43:08 "As per Mercedes guide, crankshaft must be tightened in three stages following a specific pattern and torque values" Random Middle Eastern guy with a pipe on the allen key: Allah is the only guide I need.

[@muhammadzeeshan5852]

they are torquing all right and the engines they repair last a long time. And they are not middle eastern but pushtuns. your world knowledge seems very limited

[@kingnaumce3753]

Thanks

[@emilisraelian401]

Эти Ребята очень любят свою работу... Я таких работяг ещё не видел.. молодцы 👍👍👍

[@somereal678]

clown

[@dedmasday]

эти движки делались как раз только для такого ремонта - и живут от капиталки до капиталки.. а парням мастерам респект!

[@duck1889]

Amazing job folks.

[@NicholasPittman-n4k]

Hats off to these men and may God bless them, cheers from Canada

[@aadam8049]

Makes me proud to from here, well done lads!

[@66oggy]

Oh how my heart sank when those sleeves were proudly unwrapped, and then stacked next to all the other components, all now taking their chances with the dust, grit, dirt and swarf laden environment.

[@muhammadzeeshan5852]

don’t worry they must’ve been cleaned before installation. didn’t show everything in the video. and also they were greased before being inserted.

[@SMSinger91]

These videos make me uncomfortable just imagining all the sand and dust that blows around when they have the block just open and exposed, building it out in the desert like that you're just accepting a certain amount of grit and particulate gonna cause havoc on all the bearings and reduce the service life I really wonder how long these rebuilds last

[@flipptyfloppy2817]

How long do U thnk ran B4 blow too pieces....🤣🤣🤣🤣🤣 & ghee came out 🤣🤣🤣

[@philippepanayotov9632]

Greeting from Bulgaria! Big respect for your hard work and skills!

[@khawrisafi9866]

assalam walikam I saw your videos you are ma sha Allah very good at fixing Engines, if you copy these Engines and fix parts yourself and fix your own Engines then you will have your own company in the future. do as China does, copy and fix their own Engine and sell for millions. I know you can fix it. you are very talented

[@Visionery1]

I worked at SA's MB factory in the early 90s, I used to love the sound of the V8, V10 and V12 engines running in the test bay when coming to work in the morning. The 432/443 engines could be completely overhauled multiple times.

[@BOSANAC520]

RESPEKT für euren Arbeit!

[@shahidkhon3725]

Danke da ist Pakistan

[@bbcringegaming]

@@shahidkhon3725no its afghanistan stop lying

[@cvsundar-ti7oh]

These guys are Amazing,done a perfect job.Insha Allah.

[@jeffreymakatita8699]

I realy admire their skills, amazing. Guy's keep up the good work

[@MrSteve280]

I'll buy my first a Mercedes about five minutes after these guys set up a shop in my town.

[@gotchaman1006]

Did you see any power tools,think what they could do with power tools,thry are the best on this planet bar none.😮

[@Mechanical-Hands]

Who needs power tools when you've got the sheer force of determination and elbow grease?

[@ben-c5t]

I myself not a car mecanic, buyed Mercedes from the sixties/seventies because i know, i am able to repair mostly anything by myself with a set of standard tools.

[@rockyj2008]

@@Mechanical-Handsdon’t forget common sense

[@igorfreeke8368]

No decent workplace, no decent materials, no decent tools and no manual DEEP RESPECT Reminded me of Robert Persig's The Art of Motorcycling Maintenance.

[@ltshering]

Good technical hands , respect from india

[@nahroahmady]

Respect to all of you brothers Your are amazing you guys restore the engine with old school tools ❤

[@نہسہيہمہنہسہيہمہ]

عمل اكثر من رائع و تحية للهؤلاء الشباب المبدع من المغرب 🇲🇦

[@ivan_mohov]

Похоже, что это Пакистан.

[@roporsche]

afghanistan.ist ja fast afrika.

[@AkbarDehghan-m7v]

Everything will be fine and you will shine like a rising star with great success and wealth

[@Normanx964]

Im sure Mercedes engineers are rolling their eyes seeing an engine rebuilt in the dirt.

[@fredkemper5957]

Great job guys! 🇺🇸🇨🇱

[@rogerzhang1228]

no special tools, no WIS, but these gentlemen still got the job done.

[@ramondlane8149]

Excelent work great skills in very poor conditions and with very basic tools . Great video showing these mens skills and work ethic . Thank you all

[@patrykwieczorek8903]

I expect something much worst, but this is very good job in this conditions with this tools, I see a lot of experience 👍 I wish this hard working mens a decent set of hand and power tools 😉

[@FourDollaRacing]

Burning oily rags should give you a clue as to what their infrastucture is like....

[@josephfbuck]

These guys are doing an awesome job I just wish they set up their work environment to be so much cleaner I'm used to tearing down stuff and keeping the area that I'm working in so clean I wouldn't want anything contaminating my work

[@DedyIIIka_Igor]

уф,показалось,думал всё пропало, ключ приобрели ,динамометрический, ан нет смотрю, просто трещётка)

[@Ramildin]

Это лишнее согласен

[@sergei308]

Это динамометрический ключ,только чуть ли не из позапрошлого века. Не любят это ребята современный инструмент)....

[@Ubun2025]

@@sergei308они мне кажется до сих по почте письма пишут

[@TAPSAROY]

@@sergei308 в рaшке 70% нaселения ходит срaть в яму, видимо тоже не любят современные приспособления

[@sudhirogale1687]

32:20 What did Ustadji do with that tape? At least let us know him name and a small interview about his work !!! Oh he should have our teacher in our mechanical engineering ! Very beautiful work, everyone knows how to assemble it without drawings !!!

[@ОлегСтеп-ф1л]

V10 без турбин. Механический ТНВД. Круто

[@КотКотовский-е2с]

все самое лучшее придумано в 20м веке.

[@davor4747]

beautiful sound of v10 engine greetings from peru.

[@khawrisafi9866]

Pashtuner i Afghanistan and Pakistan is very talented 🇦🇫❤️🏳️☝️

[@Zarahunna]

Salam hy ap logo ko har purze ko sai tariqe se apni jgh pai rkhna❤

[@pavelnikolaevich2120]

Прекрасное видео! Ламповое, домашнее какое-то) Родиной веет. Но всё будет работать как надо, я в этом уверен. Имея те возможности какие у них были сделали по максимуму. молодцы!

[@SergDj-m4l8h]

чисто мастерски )

[@_Pretender]

...может воняет???😂

[@pavelnikolaevich2120]

@@_Pretender Родина есть Родина. Своё ... не пахнет!

[@alexpankewitz3010]

Super impressive job. Respect! That all these parts found their way back into final position. No any single battery driven tool for disasembly. Guess that soil under their feet never will carry nay gras again 😂

[@pauldebeer9047]

Torque specs? Haha tight is tight my friend.😎

[@josephfbuck]

They may not have a clean workspace but they are making damn sure every part is spotless so in that regard I give them an A. I do think they ought to be very proud of their work

[@jamesfalvey77]

Glad they showed it start up and run

[@Mechanical-Hands]

Absolutely! Seeing the engine start up and run after the meticulous rebuilding process is incredibly satisfying. It's the moment of truth that validates all the hard work and attention to detail put into the restoration. Not only does it provide reassurance that the engine is in good working condition, but it also offers a glimpse of its potential performance. Hearing the roar of the engine coming to life is a testament to the skill and expertise of the mechanics involved.

[@acb6124-d7f]

ありがとうございます！

[@bombacimulayim1453]

Master builder is a pro. i bet he made hundreds of rebuilds.

[@ben-c5t]

That is not a big thing, if you have 200 pre-1979 DB Trucks on scrapyard.

[@OttomanDrifter91]

I can't un-hear the fact that the accelerated video made all of them sound like Jawas. Jawas rebuilding a Mercedes engine using basic tools. Lolol Great craftsmanship, cool video, love from Turkey!

[@jimsworthow531]

That is one sweet diesel engine; i would love to put that in a Ford F350 or Chevy 3500 with a manual or auto trans; whatever I could find that would fit.

[@HunterShows]

It's massive.

[@Largo5441]

Mercedes Benz 300d or td engine

[@marcprice1890]

Such great team work, this is really impressive. May I ask how much you roughly charge for a full V10 rebuild as shown? I am in awe of how well you clean and prepare these motors.

[@Ramildin]

Поршни помыли в тазике губкой - красота!

[@walterw8310]

what are they doing at 34:00, what are those plastic strips, why are they playing with the journal?

respects from brazil

[@degroot-niemeijer]

Convertingly handsome, I look at these mechanics with very high admiration.