Mercedes W126 gears repair Speedometer & Odometer by JMSpeedshop.com

[@scvs5286]

Thanks for the good video.😊 I have a question. My car is W126 300se. Can you tell me the number of third gears? please help me......

[@JMSpeedshop]

The number? Number of teeth on the gear . The small one is 12 i think

[@jimboernerjr.8794]

Incredibly well done. Saved in memory!!❤

[@JMSpeedshop]

Thanks

[@jimboernerjr.8794]

@@JMSpeedshop btw I just rebuilt a cluster and on mine the left side plastic slip for turn signal, O² sensor, etc is missing. If you happen to know where a guy could get a set?

[@zaidal-hashimi9089]

Can you please share the link for the gears you ordered from eBay? Also the lubricant and glue you used?

[@wurly164]

I saw in another video the white gear was put on so the lip was behind the big gear

[@chrisgooi]

Sir, do you find reinstalling the needles for w126 tough? Unlike w124. The pins wont stay/ cant press in the shaft. Or meter is broken?

[@JMSpeedshop]

IT was pretty easy to do . I had no problems

[@hakosama]

Did gluing the small gear work? Because I have the same problem and I am going to have to glue mine but before I do I wanna know that worked. Thank you

[@JMSpeedshop]

Yes still works without problems

[@twoodruff01]

Hello, I have a 1986 Mercedes 560 SEL and I repaired the gears for the speedometer. Now, I can't get the cluster back into the dash. Is their a trick to it? It came out easy, I just can't get it to fit back in. Thanks, Tom

[@JMSpeedshop]

There is a rubber deal around the cluster and springs that Hold IT in place in the Dash. Make Shure that there are no wirings in between. You need to push IT in against the spring pressure

[@twoodruff01]

@@JMSpeedshop Thanks, I finally got it in place.

[@robseignior4389]

Thanks for sharing your knowledge.

[@JMSpeedshop]

No problem 👍

[@Sayffe]

Nice video, thank you ! Can you give us the link pls ??! I have the exact same probleme on my 190 !

[@JMSpeedshop]

Search on eBay. Mercedes speedometer Gear Then You Will Find a lot have a look for the right model so in your case w201 and for KLM OR mph i thought there is a difference in hoe Many teeth on the gears

[@kalfoogaltmimi5043]

Please write a link to purchase gears

[@JMSpeedshop]

Search on eBay w126 speedo gears

[@chrisgooi]

Thanks for the Great vid.

[@7425park]

Very good explanations, very clear video.

[@denuwan9]

How many Fuel consumption in per liter of W 126 Mercedes Benz 3000cc diesel engine car?

[@JMSpeedshop]

don't know

[@IQ.Cars.Airplanes]

I have problem withe my "oil pressure gaga" , when the car is cold it's running as it should, but wen I drive it for about 40min or more it goes down to 0 all though the oil pump works fine, Not : When I tap on the dashboard it starts running again !!!Any ideas 💡?

[@JMSpeedshop]

I have Send you a mail 😉

[@13Makker13]

Ga je de snelheidmeter in de w201 behuizing maken? Ben ik nu ook mee bezig voor mijn w201 2.8 m104.

[@JMSpeedshop]

Ja dat is de bedoeling maar eerst de teller maar even getest en gerepareerd voor het inbouwen

[@GabrielAlmeidaSoares]

Very good. Thanks a lot.

[@petermai4663]

Looks good thanks 🙏🏼 a lot

[@aorathomas]

How can i get those gears im in kenya

[@JMSpeedshop]

Order on eBay

[@mr.h.8363]

I bet that's the VDO brand.

[@JMSpeedshop]

Yes

[@mr.h.8363]

@@JMSpeedshop Those gauges tend to go out! I found out from owning a VW. Problematic!

[@smackmag]

The odometer on my C140 doesn’t work... same setup?

[@JMSpeedshop]

Could be . Never opened one on a w140 early analog one's should not be much different i think

[@nazimansari9415]

How ican check the speedometer mercedes 126

[@JMSpeedshop]

What do You mean

[@florenciomendez5529]

I just realized today my car speedometer is not working 🤦🏽‍♂️ 85 500Sel

[@sonyhk3824]

Nice

[@JMSpeedshop]

Thanks

[@vitormanuellopesagudovitor9733]

Portugues

[@JMSpeedshop]

English

[@mariuszsiminski8374]

VW t5

[@JMSpeedshop]

for the speedo?

[@coldwarmachine]

one question everything in my console works bar the fuel level. i can jump the two cables coming from the sender to earth and then the tank will read full, do i just have a bad sender or bad cable coming from the dash to the rear of the car would you know?

[@JMSpeedshop]

The best thing to start with is to check if all connectors are free of corrosion so You got a good signal. But if You tested the Dash gauge that is working so try to test the wiring at the sensor and do the same and look if the gauge on the Dash Will also have a full reading if this works and the connectors are free of corrosion You have a bad sensor . Take IT step by step to sort IT out.