Mercedes W212 | How To Replace Engine Fuel Filter OM642

[@jimbob542]

Great Vid. Thanks for taking the time to do these, they are helping me to save a lot of money, much appreciated.

[@MB212]

If you have a newer OM642 engine, you probably have a resonator on the turbo pipe (see 2:50 in the video). The air line seal shown at 1:44 is definitely overdue for replacement. I've already ordered a new one and will be replacing it soon. If your seal looks like the one in the video, don't reuse it.

[@hich9977]

where did you buy the start button??

[@docian]

Could you do a video of how to remove the resonator pipe please. Thank you.

[@JamesParus]

The resonator is just mb trying to push away self service guys. I doubt it has any resonator duty as even cars without it down make any resonance.

[@luckyofthegame6477]

hi,are these “taxi” mercedeses expensive to maintain?

[@manualgarage]

Great work thanks for uploading✌️

[@MB212]

Purchase links: Clamp driver 7mm - amzn.to/45W4Fte Air line seal - amzn.to/45Q6d8p Click plier - amzn.to/3LjWpK5 Plastic pry kit - amzn.to/3Leit99 Hex key 5mm - amzn.to/3xD4RRM Fuel filter - amzn.to/3LcOBKd Fuel filter upgraded - amzn.to/3xUwxkX Torx t20 - amzn.to/3zyKg1y

[@pikley8061]

Thanks for adding those links

[@williechaffin387]

Great how to. Great job.

[@BronzeHandPhotograph]

Watching your informative and nicely edited videos is always very enjoyable and instructive. I don't know if you will switch to W213 but in W213 the fuel filter is located under the car and unfortunately it is more difficult to replace it.

[@MB212]

Thanks I always try my best get as much detail in the video process as possible : ) I guess a W213 is in the scoop but it probably not until I had another 212 wagon at least, it seems I also already registered a W213 channel for the future. That’s sounds quite like a interesting place to put it 🥲

[@MrAlcyxob]

Nice video. Thanks!

[@Skibilli]

Hitta precis din kanal, mycket bra videos👍🏼 du har har inget klipp på gång hur man byter olja i framdiffen? Fortsätt med det du gör! Mvh

[@MB212]

Tackar! Ingen video på det men kanske kommer någongång i framtiden

[@Danderl1977]

great job ! THX for uploading the video ! but what a pitty: oil in the turbocharger 😞

[@MB212]

Perfect it come to use. Not so uncommon at all is from the breather pipe.

[@BionicRusty]

Great timing. 👍 I have only got this and………gearbox service to do. (Both keen and a bit worried about doing that). Thank you, as ever, for posting a brilliant ’How to’. 🙏

[@MB212]

Perfect, this fuel filter is actually really easy it took me 2 hours but consider the video process this is probably more like a 30 ~ min work. But if you have upgraded engine you have bit more to remove to get access. I had not done any gearbox oil change for time being, would be interesting to do that also.

[@ztech6596]

Instructions for W211 with inline diesels: Step 1: Remove one bolt and remove 2 hoses. Replace the filter. Step 2: Done.

[@MB212]

For sure the old ones usually are much easier with the service things 👌

[@vc098]

Please fix the seal to the turbo. Its not installed correctly its going to kill your EKAS since all of the oil is dripping onto it. Thats also why there is so much oil. I had the same issue.

[@danpan6420]

Now time to replave PCV valve

[@MB212]

Can you hand me some more info about it is it due to the oil there? I honestly don’t know much about the PCV thingy 😬

[@danpan6420]

@@MB212 you have oil moisture around the PCV valve. oil blowing into turbo, oil consumption, oil leak etc. On OM 642 you want to replace PCV engine bleeder valve every 50-80K. You will see significant improvement of the engine work.

[@MB212]

Ok fair enough looked it up whole assembly is around 200€ so not to crazy repair then 👍

[@IngoAusDerKeksfabrik]

😃🖖