Mercedes W212 W211 abs ESP problem part1

[@e.l.8824]

No Job for beginners - definitly not. Dismantling is ok but puttting togehter terrible. All arms are unter tension ! You need two people for reinstall the arms, we used 3 ! hydraulic jacks and one belt with ratchet.... Be sure to strictly put on the new ring axially ! Take your time with that, its easily tilt-mounted an can be destroyed when putting it off to re-do properly. Start with removing the plastic-cover of the triangulararm, to get good hold of the hydraulic jack. The brake-disc needs not to be removed. It is helpful to have the caliper-holder installed to align the axle at putting together.....

[@kristovedernikov869]

It is not so complicated job, I disassembeled and assembeled it all by my self. Did you had air suspension? I have on mine w212, I disconnected air pipe from suspension and let air out- no tension

[@kkustiardi]

@@kristovedernikov869 I see you removed the whole knuckle from the arms. I have issue putting the lower control arm. Do you have any idea the easy way to put the knuckle to the lower control arm? the bushing is soo tight.

[@kristovedernikov869]

❤​@@kkustiardi