When installing a new fuel pump in the Mercury 60 hp, Make sure the pump seal isnt hitting the float! Thanks for watching! e mail mrswimmingbear@gmail.com
Пікірлер: 49
@GringoSFАй бұрын
very good work
@tonynapoli5549 Жыл бұрын
Glad you got it fixed and it didn’t cost you any money well done all is well that ends well.👌
@GeorgiaTrappingandFishing Жыл бұрын
The knives look great Ricky! And awesome no cost fix on the float buddy! 😊👌🇺🇸🔥👍
@scottballesteros8366 Жыл бұрын
Good video. Thanks for helping out. Nice boat. Keep up the good work
@larrybuehler3001 Жыл бұрын
I knew you could fix it, You da Man!
@MarkKelly1307 Жыл бұрын
Nothing like an easy repair! Glad it’s up and running!! Yeah, we got snow up here today. It’ll be gone in a couple days but it still showed up. Not looking forward to winter for sure! Cheers, Mark
@wallaceknifeworkshomestead Жыл бұрын
Cold here this morning! In the 50s !!
@REAPERMILITIAOUTDOORS Жыл бұрын
Glad it was easy fix brother.
@homegrowncountryhomeplace Жыл бұрын
Good job getting it going. Glad it was an easy fix. Them floats sticking can ruin a good engine quick. Have a Blessed Evening Mr. Wallace. Justin
@wallaceknifeworkshomestead Жыл бұрын
Glad thats all it was!
@FiresideCoffee Жыл бұрын
The Ric Flair impression 😂😂. Glad you got it fixed. Preventative maintenance on that rubber hose👍. You know that rubber was going to be the next thing breaking down and causing you issues lol. Hope all is well my friend 😊
@wallaceknifeworkshomestead Жыл бұрын
Thanks! All is good!
@mikecurtis2585 Жыл бұрын
Very nice sounds great 👍👍👍👍👍👍
@StompinDirt Жыл бұрын
Nice work bud glad it was an easy fix!
@wallaceknifeworkshomestead Жыл бұрын
Me to!
@zacjack3 ай бұрын
Thank you! Mine was stuck up and the pump would never kick on!
@wallaceknifeworkshomestead3 ай бұрын
Thanks for watching!
@mikelangston76992 ай бұрын
i have the same problem. pro 170 tracker. i dont think its due to aftermarket parts. i just disassembled mine. its never been taken apart but the float was hitting the seal. i filed it down slightly and hopefully fixed this poor engineering. Im learning mercury hires the same engineering folks Boeing hires
@angelaangel1553 Жыл бұрын
Thank u
@fratzogmopars23 күн бұрын
It appears cheap Chy-nesium parts have struck again.
@jeffperkins6514 Жыл бұрын
Thanks for the video. I've got a 2003 Mercury 40 hp efi that I replaced the high pressure fuel pump in the tank. Does the fuel pressure regulator supposed to have a vacuum hose on it? I don't remember if mine had one on it and I might have buried it behind the tank when reinstalling.
@charleshowell7855 Жыл бұрын
Wallace boat works and knife shop. If we ain’t making, we catching…..
@StompinDirt Жыл бұрын
🤣🤣🤣
@wallaceknifeworkshomestead Жыл бұрын
Thats right!
@brownsfishingadventures4001 Жыл бұрын
I have A 60 hp merc 2006 and i cant get the boat too tac up past 3600 rpm. I think this could be the issue.
@wallacelakehomestead6616 Жыл бұрын
Good job cuz...
@wallaceknifeworkshomestead Жыл бұрын
Thanks cuz!
@stedhomer Жыл бұрын
I knew you could do it! Just like I taught you! (HAHAHA)
@skunkedagain3 ай бұрын
What were your symptoms? Just overflows, or was there performance or idle issues too. Thanks for sharing!
@wallaceknifeworkshomestead3 ай бұрын
The boat sat up for 5 years before I got it. Rotten fuel. Thanks for watching!
@TrashedOut Жыл бұрын
Good job Ricky! I know that inexpensive fix took a load off your mind. Say, what is the status of the Master Sarge??? Hasn't been around in a while. Have I missed something?
@wallaceknifeworkshomestead Жыл бұрын
Hey Reg! It sure did! I havent heard from him. Guess he will call one day
@2751Brandon9 ай бұрын
I just broke mine apart last night. The air vent was draining fuel. I think I have the same problem with that gasket above the pump.
@trulskoch18892 ай бұрын
What was the symptoms of your fault? Mine is draining fuel from the top hose when pumping the fuel line bladder. Sounds a bit like yours 🤔
@2751Brandon2 ай бұрын
@@trulskoch1889 Actually once I changed it. It did the same thing. Good luck.
@trulskoch18892 ай бұрын
Do you mean it still had the same issue after the repair?
@2751Brandon2 ай бұрын
@@trulskoch1889 yes. It ran good for a little while. I have another intermittent problem which isn't a stuck float.
@trulskoch18892 ай бұрын
Ok I see. I have a rough idle and fuel leaks when pumping the bladder. Engine is only 5 years old. I suspect the 10% ethanol additive here in Sweden takes a toll on certain rubber/plastics.
@xzkt Жыл бұрын
Good troublesgooting Ricky! Phil
@wallaceknifeworkshomestead Жыл бұрын
Hey Phil! Good to see you!
@rcdcnc Жыл бұрын
How’s the fuel pump holding up so far ? Been thinking about getting the cheap one aswell !
@wallaceknifeworkshomestead Жыл бұрын
Its doing fine! No issues so far! Thanks for watching!
@rcdcnc Жыл бұрын
Where did you order yours from? Thanks for replying and thanks for the videos there very helpful
@wallaceknifeworkshomestead Жыл бұрын
@@rcdcnc Amazon amzn.to/3GreOCZ
@JohnnyCab Жыл бұрын
Good job
@Stump44 Жыл бұрын
What is wax?
@wallaceknifeworkshomestead Жыл бұрын
You retired folks dont know nothing about that 🤣
@bicyclecrashsurvivor8884 Жыл бұрын
That Mercury will keep you busy fixing instead of fishing. A Yamaha 4 stroke is the only way to go for reliability.
@wallaceknifeworkshomestead Жыл бұрын
Thats what I hear! But this boat was a gift, Cant beat that! Thanks for watching!