Metabo HPT Corded or Cordless Multi-Volt 10" Table Saw: Toolsday

[@fosterechalimbana2160]

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzbin.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

[@Kail174ru]

From the start, Ryan was very helpful and is continuing to be helpful about his kzbin.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans . Also, they have answered all the questions I have asked & I got outstanding support from his My Shed Plans full package.

[@blackkatstudioinc8240]

*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*

[@briandavies741]

Just bought one of these Nov 16/23 based on all the good reports. What I missed is the riving knives are a huge reoccurring problem. The one I got, the riving knife did not align with the blade. Was off by at least 2 degrees. I fiddled with it for 90 minutes. I got it aligned using shims. Then I said to myself, WTF, this is a new machine and this is not my problem. Took it back.

[@hartmanace2764]

The attachment for the fence is a stop block so u can use the fence essentially as a stop for the miter gauge sagelt

[@Rudevette]

That corded/cordless option is the greatest thing I’ve ever seen. Being metabo I expected it to be expensive but also expect quality. Durability when bouncing around in a truck or job trailer and use on site is what I care most about. I may buy one of these to add to my fleet.

[@ToolShow]

We're really hoping this Corded/Cordless feature catches on. It's always easier to choose cordless tools when a cord can be used in those rare occasions when your battery runs out early.

[@ToolShow]

Also... dat camera work though. ;-) Hollar at your brother for us!

[@RRBuildings]

Haha will do thanks guys!!

[@LaCatHTF]

Coptool you know it’s actually really easy to make that Milwaukee table saw corded. I made a little ac adapter for all my m18 and m-12 tools. Take the tops off of beat down old Milwaukee batteries and soldier the right dc adapter volts/amps and boom! Your corded!

[@JJ-lu6mg]

The plastic piece for the fence is also good for cutting real close to the fence it gives you more room to push the material and it helps from the blade hitting the fence. Looks like a real nice saw 👍🏼

[@PaganWizard]

For those who may not know......HPT actually stands for Hitachi Power Tools

[@samuelsalmonsen3944]

Word! Did not know and was curious when I bought it.

[@kathaleenwright7206]

This is a great video to show you how to put together my new saw and how to properly use it. Thanks!

[@mikeysgarage3697]

Holy headphones! Volume level on this is about 10 times louder than any other video I've watched on youtube this week!

[@honeybadger2514]

The guy that walk in the door at 13:30 😂😂

[@Aepek]

Love how you pick the Saw up & out of the box like it weighed 1 pound💪🏼, & carried to a table. You make it look like a toy, even though it’s a great powerful saw😂.... Really impressed with it 👍🏻 Than the Milwaukee is lifted up....oh my!

[@tombryan1]

Are you weak?

[@glennbrown1961]

G'day Kyle. Good to see you again. Keep it up. From Glenn in Tasmania

[@williamclark535]

I just bought the exact saw as Hitachi but not cordless for 299.00 at Lowes. Really great value if you don't mind a cord!!!! Nice vid!!!

[@chrisdonnellybuilder]

That's a well thought out saw, I like all the tool-less attachments. and the size is great too, just because something is cordless doesn't mean it needs to be small. Maybe some inspiration for DEWALT to release a large dual Flexvolt Battery model :)

[@tomim7187]

Looks like a nice saw. Dust collection on any table saw is limited if it only has a cabinet mounted dust port. Bigger cabinet saws will sometimes have optional over arm duct attachments that take the chips from the top of the blade. Small contractor saws will never have that. Looks like they thought this one through. Much better than my 15 year old Dewalt. Great video!

[@lorenwoirhaye4687]

I have a portable with over the table dust extraction. It's a Metabo Secanta. Unusual for sure and out of production. The dust hose limits rip capacity though.

[@TokyoCraftsman]

Check inside your vacuum, I think you will see that the DC works pretty good. Even on my Industrial SawStop hooked up to a 6" DC pipe with a 5 Hp blower and cyclone I get sawdust off the top of the blade when cutting. Looks like a winner! Cheers from Tokyo!

[@JasonTaylor1]

i have seen several reviewer talk about it in terms of using it to do small/thin work close to the blade. I thing it has two purposes. One as described for thin work but with the blade guard on. Two, in combination with miter guide to let you set your fence to govern the piece length but by setting this extra guide so the end farthest away from the user is in from of the blade, it prohibits the possibility of a blade bind when using the miter T

[@SteveP-vm1uc]

I like it. It is very versatile for a quick cut at home or many cuts on the job site. As far as the rough top, you probably can wax it if it is a problem for you, BUT,,, most you are going to buy a job site saw are NOT doing fine wood works with a saw like this anyway. really fine wood working almost specifically requires having a top of the line IN PLACE saw with an out feed about half the length of typical 4x8 sheet goods. It's all about your needs.....

[@AntonioClaudioMichael]

Very nice video Kyle been looking at buying this saw over the Milwaukee and the Dewalt Flexvolt

[@thomasvincent9027]

That black hook on piece is for holding down the 2x4, 1x2,1x4 ect ect .Good video

[@benjaminromshak9904]

Just got mine yesterday! Can’t wait to use it!

[@Therealphantomzero]

how do you like it one year later?

[@deanfirnatine7814]

Sounds great, love Mentabo HPT tools

[@caymanwest4929]

I like the soft start feature and it shouldn't be confused with the power of the saw. Unfortunately, the price for this jobsite saw won't win over too many prospective customers. Would like to see Metabo HPT consider a smaller less expensive version, the size of the Milwaukee unit, that runs off of its 18v battery.

[@stevemiller6518]

Great job with the new look on the intro

[@brianheckmanmeeting6726]

Hey, try working in some Johnson's paste wax into the table top. Then buff it out. The wood will just fly cross the top.

[@RRBuildings]

Great!

[@jonpatch8519]

Just bought. Better be good. hard transitioning from my Powermatic 2000 cab saw. Need a portable. $1100 with battery, cord, stand. That's pretty high! I hope it's awesome.

[@MetaboHPT]

Thanks for the review, Kyle! We appreciate all of your honest feedback.

[@RRBuildings]

👍🏻

[@jimmyvu8350]

Is there a separate stand / cart for this in Canada?

[@baseballdude8491]

Same stand as.the corded only version

[@waynesmith9997]

I have seen this same saw at Lowe's with the miter saw as well I really like the concept and if I was not so heavily invested in ridgid I would be getting in to metabo hpt

[@Mk-vb7gi]

The plastic fitting for the fence has been designed so you can butt the material against when cutting to length using the sliding fence. so when the cut is complete it does not kick back. on larger dimension saws you release the fence and slide it back when cutting to length.

[@stickyricky345]

The little plastic fence attachment thing (I believe) is a sacrificial fence that you can use when you have the rare need to rip right up against the blade so that you do not mangle the machined flat fence

[@MrTooljunkie]

I think that the black piece at 4:13 IS a stop for repetitive cross-cuts using the fence.

[@Wktr777]

Great saw. Awesome accuracy out of the box. The best quality / price ratio. Light, big table, best you can buy for this money. Original included blade sucks, it’s choking the motor. The miter gauge is a bit loose in the t-track and inaccurate within 1mm/1 degree. Overall 9/10 👏👏👏

[@AntonioClaudioMichael]

Thanks for the information Kyle

[@alk5749]

You can adjust the measurement window to fine tune your accuracy.

[@shawncockrell6007]

I can see where certain instances that would be handy, finish carpentry inside of pre built houses where a little honda generator is just not feasible etc,.….but for a exterior job site tool, doing full duty work its hard to beat a little honda generator and full power tools. or you need to deal with large light/thinner sheet goods it might make it until lunch on a battery...….its size to power/run time ratio seems to make it a specialty tool...…..if it fits a persons needs then it looks great,...as already mentioned, the dual power is a excellent feature so you are never in a power bind. I did some specialty work for a while doing vanishing screens where I needed a full sized miter saw and table saw, but worked mainly from the truck location as to contain the mess,....I just did a inverter and 2 large batteries making the full size corded equipment battery power. Due to the light usage scenario it worked great, but for framing houses it would have never worked,.....the best useful tool is the one that fits your usage scenario.....time will tell if that one fits a large enough usage scenario. Its a shame they did not squeeze that extra 1/8th for 4X material, makes me think they need a carpenter consultant, because that should have been figured out in about the time of your video in the engineering stage and it would have had they had a carpenter in the development stage.

[@RRBuildings]

Agree

[@JoryValley]

3:12 Fence attachment seems very similar to my dewalt corded saw, but definitely more features

[@sandeep12dheena]

Z

[@lorenrickey5481]

Kyle your brother is hoping you give him this saw if you don't like it. Can you plug it into the Dewalt AC power supply to see if it will work?

[@jovanventura8726]

Have you considered doing a long term use update/review video or are you no longer using it? Thank you!

[@lsellclumanetsolarenergyll5071]

now thats a good saw. We still use a older 10" Delta as a work horse but we lost the fencing to it. Would you be able to dig into a universal Fencing system for yours and show us what is out there? Thank you..... KICK BUTT Videos by the way. I wish I had that much time to actually do those too..... And you don't need to shrink the batteries LOL just better capacity ...... 18650 are coming a long way from 1200mah to now all the way up to 5000mah.

[@stevenfoust3782]

Saw looks very well designed. Very good power too. The fence rail is adjustable to dial in the scale. Why have it if ur not going to use it?. Love the glisten of all the shinny new tools I presume are sent to you for review. Good to be you.

[@harthenry]

FYI: when you cut 28 1/32 inch (in lieu of 28), I did not see where you actually zeroed the scale when you set the saw up. During shipping, things get bumped around and Metabo has set screws on the scale to allow you to zero it before you begin your cuts

[@Tazameir]

I think they should have put two battery ports and a separate 120v male plug connection. So any power cord could plug into the saw. Keep the transformer in the saw. Added bonus of charging your batteries at the same time. But they probably didn't want to add the needed space and the extra pound or two.

[@SandyCrack69]

Nice video, Any chance of doing a Tuesday Toolsday on angle grinders and the different sorts of disks you can use ?

[@RRBuildings]

Good idea

[@mesa620]

Redundant comment but hoping DeWalt makes a power adapter for their table saw.

[@kevinfilewych7291]

I think that attachment fence is for ripping thin stock. One can't get a push stick or your fingers in when the fence is high.

[@joarflesja1516]

Thanks for sharing. Im a milwaukee man, but i was thinking to buy a dewalt because the ajust is great on it. Maby i will go with this on. It has mutch more tabel on it. 😁

[@patbarrett9263]

that cheap black plastic part that clipped onto the fence was to keep thin material like hpl plastic laminate from getting stuck under the fence.

[@garyp1945ify]

Thinking about this for the new shop i will be putting together. Maybe this and the 10" mitre saw? I wont be using on jobsite, just in a shop. Thoughts,?

[@billsheffield4572]

I like most of all they made it with 35" rip capacity, so many only do 25 or 26" which still makes it hard to rip a piece of plywood at say 28" without an entire table surround or a minimum of 2 people. I don't care for the having to remove the fence and flipping stuff around to put it on top of the table for smaller rips though, at all. By any chance did they make the electric adaptor 110-220v. Odd question I know, but what size is the box?

[@RRBuildings]

I’d say 3’x3’ ish maybe 18” tall

[@duartelima6811]

Kyle. I have to give this saw a 2 on a rating. I know you did this years ago but I recently had to desperately by a saw and remember that I live in Hawaii so off to Lowes and bought this. I ran a bosch 4100 for nearly 20 years and it finally had its moment. so I ran the metabo and immediately I knew I was going to be disappointed, and true to this post I was. Believe it on not the bosch 10X which is the upgrade from the 4100 isn't available in hawaii so I rebuild my 20 year old saw for roughly 120$ and it runs as if its new. The metabo gets a 2 on my rating. 1 for the break. Awesome. 2 for the switch on and off I wish that I could get that switch to adapt to my ol trusty 4100. ACACIA

[@jimwiskus8862]

Looks like a nice saw. Time will tell about the battery option & the table surface. Happy 4th!

[@georgehyker]

After a year, What are your thoughts regarding Metabo vs Milwaukee table saw? Does one get used more?

[@playerzero0000]

Any update on the durability of the saw, 4 year later? I owned 2 Hitachi job site saws, and had issues with both. First one the switch went out, replaced the saw under warranty, and the second saw eventually developed terrible arbor wobble.

[@CorwinBos]

I like the corded capability, but it would take a hell of a saw to get me to give up my Bosch 4100 with stand.

[@JeffreyWillis800]

Beginner here, trying to figure out when to use the blade guard and anti-kickback accessory and when not to bother?

[@gadgetmantwincities]

Great saw, I want to go see one in person.

[@jacobrowland9134]

What are the benefits of a 10 in verses an 8 in blade? Seems to me the main one would be ripping a 4x4 but it couldn't do it.

[@RRBuildings]

Agree it should have been able to

[@that_guy_right_there_2945]

Looks exactly like my Hitachi table saw.

[@baletashakur]

Metabo bought Hitachi. They are one company now called Metabo HPT (Hitachi Power Tools).

[@MrBez007]

this looks a lot better saw than the metabo ts 254 job site saw I own

[@joshuakemblebluegrass838]

The fence on our 10 inch corded DeWalt saw is very similar

[@januarymorris9087]

Loved the info, would have liked to see the measurement side to see what you were explaining about the two different measurements. The extension to hold the lumber didn't look like it went out far enough to be useful. Thanks again!

[@baseballdude8491]

More useful than all the other brands Not even another portable close to these features We have two of these saws and wouldn't trade em for anything else

[@LaCatHTF]

What kind of camera do you use for your KZbin videos? Thanks for all the videos!

[@RRBuildings]

I use a canon 80d for site work and Sony a73 on toolsday

[@jason-hh6lu]

Nice saw with all the features needed. The blade size and small amp battery made it look and sound gutless when it was cutting through the timber. Did it feel restrained?

[@JimTom.]

It is gutless, i regret buying it. Im returning mine and getting another Dewalt. I had high hopes

[@nunorodrigues6201]

good friend! I wanted to know if you think this metabo 36v machine is stronger/powerful than the 60v dewalt! thanks

[@andrewbetschman3175]

Could the plastic thing be a stop block?

[@cntslesfabrication]

If you listen to when you made your cut you can hear the vacuum making a thumping sound

[@TunedIn1]

it's self-cleaning it's dust filter so it maintains peak suction ... Hilti and a few others do that too in their vacuums

[@RRBuildings]

Pretty cool eh

[@dubjspecialk]

Is there anything outside of marketing keeping every other cordless power tool manufacturer from making a corded adapter? I would be 100x more willing to buy all one brand if they all did this. It would only make me a more loyal consumer. Lol

[@RRBuildings]

agree

[@jasonhannsz]

www.factoryauthorizedoutlet.com/products/dewalt-dca120-flexvolt-120-volt-battery-replacing-corded-power-supply-adaptor?gclid=CjwKCAjwx_boBRA9EiwA4kIELr0ANcn5Y71u7KKKn-XemmAXxO4T-uHHYvdnZVgr_76jtzdq429a0BoCe80QAvD_BwE Dewalt makes an adapter.

[@bbfoto7248]

@@jasonhannsz Just FYI, the Specs for THAT adapter say, "Only works on Flexvolt DHS716 series and DHS790 series MITER SAWS"

[@UsernameJessEm]

They make more on battery sales than on the tools. Customer loyal to company >> Company loyal (beholden) to investors and shareholders >> Shareholders loyal to profit >> Profit contingent on sales numbers and margins.

[@jasonpost1771]

You don’t have to take the fence off to flip the guid over

[@deanosslewis]

I bought the hikoki (same saw) . Cuts sheets well but for solid timber its underpowered. They almost get it right again but let down by the most crucial thing. Power

[@perrosymasperros8516]

Sienpre aapoyando your channel.,., rr buildin is the maximum I admire you a lot cael

[@POLOLOUS3]

Not sure if I missed it in the video but this vs Milwaukee cordless as from a quality/feature/performance standpoint. I know the blade/cord differences

[@cntslesfabrication]

How many cuts can you get on that battery?

[@RRBuildings]

Haven’t had enough time to say yet

[@1888CHAD8881]

In normal applications, what setting do you keep the riving knife? (If i wasnt using antikick back stuff)?

[@calical26]

im a tinner that would be good fabbing up composite panels

[@danec5598]

Are you currently using this saw on the job site and how is it performing until now? Can it run all day on one charge

[@olyjfitness]

I've ordered two of these both of them turned up damaged with bits broken off. Is there an issue with build quality and durability on these?

[@andrewmortimer3317]

Great video!

[@chrisE815]

Hey Kyle. I haven't noticed which table saw you have been using in recent videos. Have you been using this saw much on jobs? If so, how's it holding up?

[@dillondavis9615]

only thing i use on a table saw is riving knife and nothing else but a push stick

[@peterlisyak5396]

Hey Kyle, I think that the black plastic over the fence jig you could use to make shims with, and the table surface you could try using silver glide or a paste wax to make it easier to push the material through, just a thought, have a good one

[@silencitopunk]

Hey man so im trying to replace my old table saw and i kind of wanna get the 36v metabo one so after 2 years of using it would you recommend it would you buy it again? Thanks in advanced man i like your videos keep them coming

[@JimTom.]

Its very under powered, just keep that in mind. Great for plywood etc, but not ripping

[@ligngood3787]

Looks a lot better than DeWalt or Milwaukee, but 7 months later and it is still not available. I was about to buy the DeWalt when I found this but I can't buy it anywhere!

[@clivejenkins3739]

Is this table saw available in the U.K. I have looked and I can't see them anywhere!!!

[@RH-li6po]

lts a Hitachi , Metabo took over Hitachi recently,hope this helps!

[@1lllllllll1]

Would have been nice to learn how many 4” LF you can rip on one charge

[@loucifer323]

Is it 120v when corded or does it remain 40v

[@RRBuildings]

Not sure exactly but there is no difference or noticeable change is power

[@benjaminromshak9904]

Ordering mine next week!!! Already have the hammer drill, 1/2 in impact wrench, triple hammer and 7 1/2 circular saw from the Multivolt line. Real quality stuff!

[@RRBuildings]

Good stuff

[@MetaboHPT]

We're glad you're happy with everything you've purchased, Benjamin! Thanks for being a fan of Metabo HPT.

[@ronnieves2398]

How do you like it. Longevity? Has the battery kept up charge? I am in the process of hopefully getting one.

[@CARyan08]

Wow..I thought you had a green Dewalt 7491 at first. There has to be a common manufacturer involved.

[@fortunecollector]

4:51 Safety "third" lol. Yup them blade guards are a nuisance

[@bfjoutdoors]

its 4ah at 36v, 8ah at 18v

[@Therealphantomzero]

Any updates on this saw?

[@steveb611]

Great review. U still recommend saw

[@whitemale8492]

Will this work with the larger battery like the 5ah?

[@nicolbunyan3203]

Great saw but I for one am gutted that the battery from all my metabo kit wont fit this or anything Hikoki kit also think the fence looks great very like the dewalt one on similar saws

[@dalmirborges783]

Muito boas suas informações,obrigado!!!

[@jimmyvu8350]

Does metabo sell a separate stand for this ?

[@whitemale8492]

Will this work with other batteries sizes, I always see the 4.0ah, will the 5.0ah or 2.0ah work?

[@baseballdude8491]

2.5/5.0 Multivolt and 4.0/8.0 Multivolt and the AC adapter made for all 36V tools

[@eselilmtz]

When does it come out ?

[@jasonppm4043]

Very cool do you like it more than your Milwaukee? -Clayton